36 Commits

Include renames

Author	SHA1	Message	Date
10 people	ad96df566b	File > Save As / Save a Copy / CLI can write PDF (#3401) (#3441) ... * TIFF: read and write CIE L*a*b* (CIELab, ICCLab); Lab documents stay Lab Photoshop saves Lab documents as CIELab TIFFs (PhotometricInterpretation 8, a* and b* signed), which PhotoCraft could not open, and PhotoCraft saved Lab documents as sRGB TIFFs. - codecs: a Lab channel layout (Lab, LabA) holding a* and b* as PhotoCraft's Lab documents do ((a + 128) / 255; 16 bits like the PSD importer), with its own Lab <-> sRGB conversion (same formulas as photocraft-color; codecs stays standalone) for formats without Lab, which now warn LabConverted. - TIFF read: CIELab and ICCLab (8 and 16 bits, alpha) are handed to the tiff crate as RGB and labelled Lab; a* and b* are converted from the file's encoding (signed a / 256a, or offset). - TIFF write: Lab and LabA as CIELab, as Photoshop writes it; float Lab is written with 16 bits (DepthReduced). - io: a Lab TIFF opens as a Lab document; a Lab document with one plain layer is written to TIFF in Lab (other formats still use sRGB). Photoshop 2025's Lab TIFFs open with the colours Photoshop shows (its own RGB conversion matches within one level at 8 bits and exactly at 16 bits), and Photoshop reads PhotoCraft's Lab TIFFs back with the same L*a*b* values. Fixes #4936 * PSD: a smart object's filter mask shows when the file opens Photoshop stores a smart object's layer pixels with its filters applied but not its filter mask. When it composites, it mixes the unfiltered pixels (cached in FEid) back in through the mask. We showed the stored pixels as they were, so a PSD whose smart filter has a mask opened with the filter everywhere. Only after something re-rendered the smart object did the mask appear, because our re-render mixes it. - compose::filter_mask holds the mix, moved from the engine, and its inverse. - Import decodes the unfiltered pixels from FEid (smart_map::unfiltered_from_item) and keeps the mixed result as the smart object's pixels, as the engine's re-render does. - Export writes the layer record the way Photoshop does: unmixed with the unfiltered pixels it writes (or keeps) in FEid, so Photoshop mixes back to what the document showed. Transparent pixels stay empty. Photoshop oracles: sf-filter-mask-hard, sf-filter-mask-gradient and sf-stack-blend-and-mask pass (145 -> 148 of 258); floor 145 -> 148. psd-tools and io corpora unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * DNG: decode lossy (JPEG-compressed) DNG tiles (FILE-215-11) DNG 1.4 lossy JPEG (compression 34892) stores each tile or strip as a baseline-DCT JPEG of 8-bit samples: a gray stream for CFA data, a YCbCr stream for three-sample LinearRaw. The decoder arm from #2021 read the streams but widened every sample by 257, so the values no longer matched the file's levels: an 8-bit WhiteLevel (or its default, 255) clipped everything to white and a 256-entry LinearizationTable was indexed past its end. It also required the JPEG frame to match the clipped row count, which rejected the padded edge tiles real tiled files carry. The arm is now `lossy_jpeg()` in sensor.rs. The decoded 8-bit values are the stored samples, and BlackLevel, WhiteLevel (default 255 for 8-bit data) and the LinearizationTable apply to them exactly as for every other compression. A tile may be coded at the full tile size (edge tiles padded, as the spec says) or at the image's row count; a strip at its row count; the width must be the segment's. BitsPerSample must be 8 and the JPEG's component count must equal SamplesPerPixel (1 or 3); anything else is an error, never a silent conversion. The frame header is checked before any pixel is decoded and the JPEG decoder's own size cap is the segment the IFD declares (already charged against the limits), so a hostile SOF cannot size a buffer past the tile. testgen writes true 8-bit lossy fixtures (`LossyJpegTiles`, and strips via the new `LossyJpegStrips`), accepts pre-encoded `lossy_segments` for hostile-input tests, exposes `baseline_jpeg()`, and leaves WhiteLevel out when `white` is 0. The DNG tests cover CFA and LinearRaw RGB from tiles and strips at 37x23 (partial edge tiles, a short last strip), the default white level, black/white scaling and a LinearizationTable against the uncompressed path, and hostile inputs: a truncated tile, frame-size and component-count mismatches, a 65535x65535 SOF under default and tight limits, a tile over the allocation budget, and 12/16-bit or 4-sample files. The hostile mutation set gains a lossy CFA and a lossy LinearRaw file. The parity doc's DNG row is updated; the scorecard row is left for the coordinating branch. * Raw: measure the Nikon D90 image area (4288x2848 at (10, 10)) Aligning the decoded D90 sensor plane with the camera's own JPEG puts the image at (10, 10) in the 4352x2868 sensor plane, giving the camera's 4288x2848 frame (10-pixel margins; the right border reads the camera's flat 255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the camera's frame instead of the uncropped plane, and make a measured profile leave a file that carries its own colour calibration (a DNG) untouched. * File > Save As / Save a Copy / CLI can write PDF: one flattened page with the embedded profile (#3401) * Codecs: open Cineon (.cin) film frames read-only Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from the same Kodak header family: the generic header (big-endian, orientation at 192, channel count at 193, the channel-1 bits/dimensions), one or three channels, three 10-bit samples packed into each 32-bit word on a word boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the file's log black/white points are a display choice and are not applied. A depth other than 10 bits or a channel count other than 1/3 is Unsupported; truncation errors rather than panicking. Read-only (no Cineon writer), so .cin joins the open filters and Cineon read closes part of #1049's G10 gap. * Vector: bound flattening memory, keep over-budget dashes, cheaper edge build (#5195) - flatten: a path's flattened points are capped at 1 << 20; past it every curve keeps a proportional share of its pieces (at least one), so hostile handles from files (vmsk, SVG, effect outlines) cannot exhaust memory. fill_rasterizer flattens the whole path under one budget. - stroke: past the dash step budget (or below coordinate precision), dash_polyline keeps the dashes made so far and draws the rest solid instead of dropping the stroke. Open polylines are no longer copied. - raster: coordinates are clamped to +-1e15 and edges with a non-finite slope (vanishingly short) are skipped, so huge finite coordinates no longer produce NaN coverage. fill_rasterizer sorts edges once instead of after every component (stable sort, identical order). - Cleanups: dead miter `half`, dead loop-length check in trace_mask, shared mask render body, map_knots helper, shared straight-segment test. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * PSD: cap pattern memory across a parse, reject mixed-depth pattern channels (#5198) - Patterns: one PatternBudget (decoded bytes + zero padding) is shared by every pattern of a block, a .pat file and the pattern blocks of one document; .abr patt sections are charged to the samples' budget. - Patterns: a channel whose depth differs from the first is rejected (the parsed pattern could not be written back). - Slices: descriptor numbers no longer wrap; out-of-range ids are no id, coordinates clamp to i32, and a v6 trailing entry without a usable id attaches its outsets to no slice. - LayerInfo::unpadded_len is computed from field sizes instead of serializing every record into a scratch buffer. - abr desc presets are moved out instead of cloned; UnFl and shmd counts use the bounded preallocation; ImageData::decode_channel (decoded every plane to return one, unused outside its test) is removed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Vector: bound stroke outline points (#5211) - stroke_polygons dashes all lines first, then counts round caps and joins. When their full-resolution tessellation would exceed 1 << 20 outline points, every round cap and join gets the same smaller segment count (down to 4 per circle, 1 per join; area-exact radius kept). Strokes under the budget are unchanged; no piece is dropped. - The dash step budget (100000) is now shared by all lines of a stroke instead of per polyline, so many subpaths cannot multiply the dash (and cap) count. Past it the rest is drawn solid, as before. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * PSD: write tiff blocks without copies, inflate merged ZIP once - ImageSourceData::to_bytes writes the global mask and global blocks straight from the model with 4-byte alignment instead of cloning each block (data included) to set its padding. Same bytes. - The tiff transcoder's nested regions and blocks write into the parent's buffer (taken and handed back, error or not) instead of building their own output and copying it up per nesting level. Bodies that fail or are not transcoded are truncated before being copied as stored or dropped. Same bytes. - PsdFile::from_bytes_and_merged decodes the merged image with the parse when asked: a ZIP stream is inflated once (the decode's stream check is the parse's); the parse-only check runs only when the decode fails, to keep from_bytes' errors. PSD import uses it with merged_needed. - PsdBuilder::composite documents that Gray/CMYK composites stay straight. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Content-Aware Fill: measure a thin hole by its thickness, not its bounds (#1366) Removing long, thin objects (coiled guitar strings, wires) left their outline as darker and lighter blotches and copied pieces of other strings into the fill. The pyramid shrank until the hole's bounding box was four patches across: for a string across the image that is a level where the hole has swallowed its surroundings, so the matches found there copy whatever looks like the blur, and the finer levels (refine-only for wide bounds) keep them. A hole at most a quarter as thick as its bounds are long now counts as thin: the pyramid stops while it is still about two patches thick, and that level starts from a membrane across it (over a few pixels, the surroundings themselves) instead of the onion peel, whose exhaustive search is what made a shallow pyramid unaffordable. Compact holes are unchanged bit for bit. Refs #1366 * perf(compose,gpu): effect caches reserve tile addresses instead of pinning layers Effect map cache entries kept a clone of their layer (a deep clone for groups) so the tile addresses the cache key hashes couldn't be reused. That kept an edited or deleted layer's pixels alive, uncounted, until the entry was evicted. Keep a Weak to each hashed tile instead: it reserves the address without keeping the pixels. The GPU compositor's styled-group pins and shape-source tile snapshots do the same. Part of #4530. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(history): count snapshot-only tiles against the history budget History panel snapshots outlived every budget: a Merged Layers snapshot is a full flattened copy that neither the history budget, the GPU budget's document bytes nor Purge accounted for. Trim now counts the tiles only snapshots hold as fixed cost, the GPU budget includes them, and Purge > Histories no longer reports tiles a kept snapshot still holds as freed. Part of #4530. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Content-Aware Fill: every part of a thin selection keeps its surroundings (#1366) Two more causes of ghosts when removing strings and the small knobs selected with them: * Auto sampling summarises the selection's surroundings by a few clusters. Around a long selection those come from the strings' surroundings, so a small part elsewhere (a tuning knob in a differently coloured corner) lost its own surroundings and was filled from far away in another colour. Around a thin selection the Auto area now always reaches as far as the selection is thick. * The membrane that starts a thin hole now starts a patch radius out, past the anti-aliased fringe or halo that a selection drawn close to the object leaves outside it. Refs #1366 * Content-Aware Fill: peel a thin hole where that stays affordable (#1366) Starting every thin hole from a membrane smoothed Spot Healing on film grain (spot_healing_keeps_film_grain_through_overlapping_strokes: grain 9.0 against 12.1 around). The onion peel copies the grain; it was only given up because its exhaustive search is too slow on the big level a long thin hole stops at. It now starts the thin hole whenever hole cells times sources stay within 2^28 comparisons, and the membrane only beyond. Refs #1366 * Select Subject: keep subject parts coloured like the backdrop, leave enclosed gaps open Users on #2788 reported Select Subject dropping clothes that are close in colour to a plain wall and bridging the gap between an arm and the torso. Both come from the same place: the saliency pass labels low-contrast parts of the subject as background, the background colour model then learns them and explains them away, and the final blind hole fill closes every enclosed gap up to 5 % of the mask. Two changes in crates/algo: - A second GrabCut pass whose background model only knows the backdrop. A colour model fitted to the image frame (minus a margin around the salient blob, in case the subject runs out of the picture) marks every pixel it explains as probable background; the blob and whatever the backdrop cannot account for start as probable foreground. Only components that touch the first pass's result survive. - Hole filling that consults the colour models: specks (<= 0.2 % of the mask) always fill, larger holes up to 5 % fill only when their pixels fit the foreground model better than the background's. Tests: two regressions (a cream-shouldered figure on a near-white wall keeps its shoulders; a ring keeps its backdrop-coloured hole open), plus ignored timing and picture-dump helpers. The 6 MP first run goes from about 100 ms to about 200 ms on one core; the P29 repeat path is untouched. * Keyboard shortcut sets: Set menu, New Set, Save, Delete, .kys Export and Summarize (K2) Edit › Keyboard Shortcuts gets Photoshop's set management. A set is a saved copy of the bindings (Preferences.shortcutSets, the one in use in shortcutSet; "" is PhotoCraft Defaults), and the Set menu shows "(modified)" when the bindings differ from it. New Set…, Save and Delete wait for OK like the rest of the dialog. Export… writes the dialog's bindings as a .kys file (commands then tools, Photoshop's macOS key spelling), each row carrying our id as pc-id so PhotoCraft imports its own sets back exactly, whatever the label; Summarize… writes Photoshop's HTML list of every bound command by menu. edit.keyboardShortcuts takes useSet (before the call's edits), saveSet, deleteSet, sets and activeSet (after them), exportKys and summarize; every reply reports the sets, the set in use and whether it is modified. Bad names, keys or counts are errors that change nothing. * .kys import: tool keys and sets saved on Windows (K3) Photoshop's <tool> rows now import: each matches our tool by name (our tool names are Photoshop's) or by pc-id in sets PhotoCraft exported, and a letter other than the tool's own becomes its override, while its own letter keeps the tool cycling with the others (#5036). A set saved on Windows spells the primary modifier Ctrl where a Mac set writes Cmd and keeps Control for the Control key. A set with no Cmd or Opt anywhere but some Ctrl is read as a Windows set, its Ctrl as our Cmd: Ctrl+L is the Cmd+L default, not a Control-key override that would also mean Control on a Mac. The import reports `windows`. * cargo fmt the extension lists Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Gert Pellin <gert@pellin.be> Co-authored-by: timothydaly1 <tadaly04@protonmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Fabio Lissi <fabio.lissi@gmail.com> Co-authored-by: vangel76 <vangel1976@googlemail.com> Co-authored-by: Finn Newick <finnnk@gmail.com> Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Diego Chagas <drochachagas@gmail.com> Co-authored-by: Tanish Manku <tmanku.dev@gmail.com>	2026-10-15 01:03:27 -04:00
10 people	4e1e325b17	PSD: a smart object's filter mask shows when the file opens (#5005) ... * TIFF: read and write CIE L*a*b* (CIELab, ICCLab); Lab documents stay Lab Photoshop saves Lab documents as CIELab TIFFs (PhotometricInterpretation 8, a* and b* signed), which PhotoCraft could not open, and PhotoCraft saved Lab documents as sRGB TIFFs. - codecs: a Lab channel layout (Lab, LabA) holding a* and b* as PhotoCraft's Lab documents do ((a + 128) / 255; 16 bits like the PSD importer), with its own Lab <-> sRGB conversion (same formulas as photocraft-color; codecs stays standalone) for formats without Lab, which now warn LabConverted. - TIFF read: CIELab and ICCLab (8 and 16 bits, alpha) are handed to the tiff crate as RGB and labelled Lab; a* and b* are converted from the file's encoding (signed a / 256a, or offset). - TIFF write: Lab and LabA as CIELab, as Photoshop writes it; float Lab is written with 16 bits (DepthReduced). - io: a Lab TIFF opens as a Lab document; a Lab document with one plain layer is written to TIFF in Lab (other formats still use sRGB). Photoshop 2025's Lab TIFFs open with the colours Photoshop shows (its own RGB conversion matches within one level at 8 bits and exactly at 16 bits), and Photoshop reads PhotoCraft's Lab TIFFs back with the same L*a*b* values. Fixes #4936 * PSD: a smart object's filter mask shows when the file opens Photoshop stores a smart object's layer pixels with its filters applied but not its filter mask. When it composites, it mixes the unfiltered pixels (cached in FEid) back in through the mask. We showed the stored pixels as they were, so a PSD whose smart filter has a mask opened with the filter everywhere. Only after something re-rendered the smart object did the mask appear, because our re-render mixes it. - compose::filter_mask holds the mix, moved from the engine, and its inverse. - Import decodes the unfiltered pixels from FEid (smart_map::unfiltered_from_item) and keeps the mixed result as the smart object's pixels, as the engine's re-render does. - Export writes the layer record the way Photoshop does: unmixed with the unfiltered pixels it writes (or keeps) in FEid, so Photoshop mixes back to what the document showed. Transparent pixels stay empty. Photoshop oracles: sf-filter-mask-hard, sf-filter-mask-gradient and sf-stack-blend-and-mask pass (145 -> 148 of 258); floor 145 -> 148. psd-tools and io corpora unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * DNG: decode lossy (JPEG-compressed) DNG tiles (FILE-215-11) DNG 1.4 lossy JPEG (compression 34892) stores each tile or strip as a baseline-DCT JPEG of 8-bit samples: a gray stream for CFA data, a YCbCr stream for three-sample LinearRaw. The decoder arm from #2021 read the streams but widened every sample by 257, so the values no longer matched the file's levels: an 8-bit WhiteLevel (or its default, 255) clipped everything to white and a 256-entry LinearizationTable was indexed past its end. It also required the JPEG frame to match the clipped row count, which rejected the padded edge tiles real tiled files carry. The arm is now `lossy_jpeg()` in sensor.rs. The decoded 8-bit values are the stored samples, and BlackLevel, WhiteLevel (default 255 for 8-bit data) and the LinearizationTable apply to them exactly as for every other compression. A tile may be coded at the full tile size (edge tiles padded, as the spec says) or at the image's row count; a strip at its row count; the width must be the segment's. BitsPerSample must be 8 and the JPEG's component count must equal SamplesPerPixel (1 or 3); anything else is an error, never a silent conversion. The frame header is checked before any pixel is decoded and the JPEG decoder's own size cap is the segment the IFD declares (already charged against the limits), so a hostile SOF cannot size a buffer past the tile. testgen writes true 8-bit lossy fixtures (`LossyJpegTiles`, and strips via the new `LossyJpegStrips`), accepts pre-encoded `lossy_segments` for hostile-input tests, exposes `baseline_jpeg()`, and leaves WhiteLevel out when `white` is 0. The DNG tests cover CFA and LinearRaw RGB from tiles and strips at 37x23 (partial edge tiles, a short last strip), the default white level, black/white scaling and a LinearizationTable against the uncompressed path, and hostile inputs: a truncated tile, frame-size and component-count mismatches, a 65535x65535 SOF under default and tight limits, a tile over the allocation budget, and 12/16-bit or 4-sample files. The hostile mutation set gains a lossy CFA and a lossy LinearRaw file. The parity doc's DNG row is updated; the scorecard row is left for the coordinating branch. * Raw: measure the Nikon D90 image area (4288x2848 at (10, 10)) Aligning the decoded D90 sensor plane with the camera's own JPEG puts the image at (10, 10) in the 4352x2868 sensor plane, giving the camera's 4288x2848 frame (10-pixel margins; the right border reads the camera's flat 255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the camera's frame instead of the uncropped plane, and make a measured profile leave a file that carries its own colour calibration (a DNG) untouched. * Codecs: open Cineon (.cin) film frames read-only Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from the same Kodak header family: the generic header (big-endian, orientation at 192, channel count at 193, the channel-1 bits/dimensions), one or three channels, three 10-bit samples packed into each 32-bit word on a word boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the file's log black/white points are a display choice and are not applied. A depth other than 10 bits or a channel count other than 1/3 is Unsupported; truncation errors rather than panicking. Read-only (no Cineon writer), so .cin joins the open filters and Cineon read closes part of #1049's G10 gap. * Vector: bound flattening memory, keep over-budget dashes, cheaper edge build (#5195) - flatten: a path's flattened points are capped at 1 << 20; past it every curve keeps a proportional share of its pieces (at least one), so hostile handles from files (vmsk, SVG, effect outlines) cannot exhaust memory. fill_rasterizer flattens the whole path under one budget. - stroke: past the dash step budget (or below coordinate precision), dash_polyline keeps the dashes made so far and draws the rest solid instead of dropping the stroke. Open polylines are no longer copied. - raster: coordinates are clamped to +-1e15 and edges with a non-finite slope (vanishingly short) are skipped, so huge finite coordinates no longer produce NaN coverage. fill_rasterizer sorts edges once instead of after every component (stable sort, identical order). - Cleanups: dead miter `half`, dead loop-length check in trace_mask, shared mask render body, map_knots helper, shared straight-segment test. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * PSD: cap pattern memory across a parse, reject mixed-depth pattern channels (#5198) - Patterns: one PatternBudget (decoded bytes + zero padding) is shared by every pattern of a block, a .pat file and the pattern blocks of one document; .abr patt sections are charged to the samples' budget. - Patterns: a channel whose depth differs from the first is rejected (the parsed pattern could not be written back). - Slices: descriptor numbers no longer wrap; out-of-range ids are no id, coordinates clamp to i32, and a v6 trailing entry without a usable id attaches its outsets to no slice. - LayerInfo::unpadded_len is computed from field sizes instead of serializing every record into a scratch buffer. - abr desc presets are moved out instead of cloned; UnFl and shmd counts use the bounded preallocation; ImageData::decode_channel (decoded every plane to return one, unused outside its test) is removed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Vector: bound stroke outline points (#5211) - stroke_polygons dashes all lines first, then counts round caps and joins. When their full-resolution tessellation would exceed 1 << 20 outline points, every round cap and join gets the same smaller segment count (down to 4 per circle, 1 per join; area-exact radius kept). Strokes under the budget are unchanged; no piece is dropped. - The dash step budget (100000) is now shared by all lines of a stroke instead of per polyline, so many subpaths cannot multiply the dash (and cap) count. Past it the rest is drawn solid, as before. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * PSD: write tiff blocks without copies, inflate merged ZIP once - ImageSourceData::to_bytes writes the global mask and global blocks straight from the model with 4-byte alignment instead of cloning each block (data included) to set its padding. Same bytes. - The tiff transcoder's nested regions and blocks write into the parent's buffer (taken and handed back, error or not) instead of building their own output and copying it up per nesting level. Bodies that fail or are not transcoded are truncated before being copied as stored or dropped. Same bytes. - PsdFile::from_bytes_and_merged decodes the merged image with the parse when asked: a ZIP stream is inflated once (the decode's stream check is the parse's); the parse-only check runs only when the decode fails, to keep from_bytes' errors. PSD import uses it with merged_needed. - PsdBuilder::composite documents that Gray/CMYK composites stay straight. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Content-Aware Fill: measure a thin hole by its thickness, not its bounds (#1366) Removing long, thin objects (coiled guitar strings, wires) left their outline as darker and lighter blotches and copied pieces of other strings into the fill. The pyramid shrank until the hole's bounding box was four patches across: for a string across the image that is a level where the hole has swallowed its surroundings, so the matches found there copy whatever looks like the blur, and the finer levels (refine-only for wide bounds) keep them. A hole at most a quarter as thick as its bounds are long now counts as thin: the pyramid stops while it is still about two patches thick, and that level starts from a membrane across it (over a few pixels, the surroundings themselves) instead of the onion peel, whose exhaustive search is what made a shallow pyramid unaffordable. Compact holes are unchanged bit for bit. Refs #1366 * perf(compose,gpu): effect caches reserve tile addresses instead of pinning layers Effect map cache entries kept a clone of their layer (a deep clone for groups) so the tile addresses the cache key hashes couldn't be reused. That kept an edited or deleted layer's pixels alive, uncounted, until the entry was evicted. Keep a Weak to each hashed tile instead: it reserves the address without keeping the pixels. The GPU compositor's styled-group pins and shape-source tile snapshots do the same. Part of #4530. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(history): count snapshot-only tiles against the history budget History panel snapshots outlived every budget: a Merged Layers snapshot is a full flattened copy that neither the history budget, the GPU budget's document bytes nor Purge accounted for. Trim now counts the tiles only snapshots hold as fixed cost, the GPU budget includes them, and Purge > Histories no longer reports tiles a kept snapshot still holds as freed. Part of #4530. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Content-Aware Fill: every part of a thin selection keeps its surroundings (#1366) Two more causes of ghosts when removing strings and the small knobs selected with them: * Auto sampling summarises the selection's surroundings by a few clusters. Around a long selection those come from the strings' surroundings, so a small part elsewhere (a tuning knob in a differently coloured corner) lost its own surroundings and was filled from far away in another colour. Around a thin selection the Auto area now always reaches as far as the selection is thick. * The membrane that starts a thin hole now starts a patch radius out, past the anti-aliased fringe or halo that a selection drawn close to the object leaves outside it. Refs #1366 * Content-Aware Fill: peel a thin hole where that stays affordable (#1366) Starting every thin hole from a membrane smoothed Spot Healing on film grain (spot_healing_keeps_film_grain_through_overlapping_strokes: grain 9.0 against 12.1 around). The onion peel copies the grain; it was only given up because its exhaustive search is too slow on the big level a long thin hole stops at. It now starts the thin hole whenever hole cells times sources stay within 2^28 comparisons, and the membrane only beyond. Refs #1366 * Select Subject: keep subject parts coloured like the backdrop, leave enclosed gaps open Users on #2788 reported Select Subject dropping clothes that are close in colour to a plain wall and bridging the gap between an arm and the torso. Both come from the same place: the saliency pass labels low-contrast parts of the subject as background, the background colour model then learns them and explains them away, and the final blind hole fill closes every enclosed gap up to 5 % of the mask. Two changes in crates/algo: - A second GrabCut pass whose background model only knows the backdrop. A colour model fitted to the image frame (minus a margin around the salient blob, in case the subject runs out of the picture) marks every pixel it explains as probable background; the blob and whatever the backdrop cannot account for start as probable foreground. Only components that touch the first pass's result survive. - Hole filling that consults the colour models: specks (<= 0.2 % of the mask) always fill, larger holes up to 5 % fill only when their pixels fit the foreground model better than the background's. Tests: two regressions (a cream-shouldered figure on a near-white wall keeps its shoulders; a ring keeps its backdrop-coloured hole open), plus ignored timing and picture-dump helpers. The 6 MP first run goes from about 100 ms to about 200 ms on one core; the P29 repeat path is untouched. * Keyboard shortcut sets: Set menu, New Set, Save, Delete, .kys Export and Summarize (K2) Edit › Keyboard Shortcuts gets Photoshop's set management. A set is a saved copy of the bindings (Preferences.shortcutSets, the one in use in shortcutSet; "" is PhotoCraft Defaults), and the Set menu shows "(modified)" when the bindings differ from it. New Set…, Save and Delete wait for OK like the rest of the dialog. Export… writes the dialog's bindings as a .kys file (commands then tools, Photoshop's macOS key spelling), each row carrying our id as pc-id so PhotoCraft imports its own sets back exactly, whatever the label; Summarize… writes Photoshop's HTML list of every bound command by menu. edit.keyboardShortcuts takes useSet (before the call's edits), saveSet, deleteSet, sets and activeSet (after them), exportKys and summarize; every reply reports the sets, the set in use and whether it is modified. Bad names, keys or counts are errors that change nothing. * .kys import: tool keys and sets saved on Windows (K3) Photoshop's <tool> rows now import: each matches our tool by name (our tool names are Photoshop's) or by pc-id in sets PhotoCraft exported, and a letter other than the tool's own becomes its override, while its own letter keeps the tool cycling with the others (#5036). A set saved on Windows spells the primary modifier Ctrl where a Mac set writes Cmd and keeps Control for the Control key. A set with no Cmd or Opt anywhere but some Ctrl is read as a Windows set, its Ctrl as our Cmd: Ctrl+L is the Cmd+L default, not a Control-key override that would also mean Control on a Mac. The import reports `windows`. * cargo fmt the extension lists Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Gert Pellin <gert@pellin.be> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Fabio Lissi <fabio.lissi@gmail.com> Co-authored-by: Vikram Bhaskaran <vikram.bhaskaran@outlook.com> Co-authored-by: vangel76 <vangel1976@googlemail.com> Co-authored-by: Finn Newick <finnnk@gmail.com> Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Diego Chagas <drochachagas@gmail.com> Co-authored-by: Tanish Manku <tmanku.dev@gmail.com>	2026-10-15 00:58:45 -04:00
9 people	8a6af66cf6	DNG: decode lossy (JPEG-compressed) DNG tiles (FILE-215-11) (#5112) ... * TIFF: read and write CIE L*a*b* (CIELab, ICCLab); Lab documents stay Lab Photoshop saves Lab documents as CIELab TIFFs (PhotometricInterpretation 8, a* and b* signed), which PhotoCraft could not open, and PhotoCraft saved Lab documents as sRGB TIFFs. - codecs: a Lab channel layout (Lab, LabA) holding a* and b* as PhotoCraft's Lab documents do ((a + 128) / 255; 16 bits like the PSD importer), with its own Lab <-> sRGB conversion (same formulas as photocraft-color; codecs stays standalone) for formats without Lab, which now warn LabConverted. - TIFF read: CIELab and ICCLab (8 and 16 bits, alpha) are handed to the tiff crate as RGB and labelled Lab; a* and b* are converted from the file's encoding (signed a / 256a, or offset). - TIFF write: Lab and LabA as CIELab, as Photoshop writes it; float Lab is written with 16 bits (DepthReduced). - io: a Lab TIFF opens as a Lab document; a Lab document with one plain layer is written to TIFF in Lab (other formats still use sRGB). Photoshop 2025's Lab TIFFs open with the colours Photoshop shows (its own RGB conversion matches within one level at 8 bits and exactly at 16 bits), and Photoshop reads PhotoCraft's Lab TIFFs back with the same L*a*b* values. Fixes #4936 * DNG: decode lossy (JPEG-compressed) DNG tiles (FILE-215-11) DNG 1.4 lossy JPEG (compression 34892) stores each tile or strip as a baseline-DCT JPEG of 8-bit samples: a gray stream for CFA data, a YCbCr stream for three-sample LinearRaw. The decoder arm from #2021 read the streams but widened every sample by 257, so the values no longer matched the file's levels: an 8-bit WhiteLevel (or its default, 255) clipped everything to white and a 256-entry LinearizationTable was indexed past its end. It also required the JPEG frame to match the clipped row count, which rejected the padded edge tiles real tiled files carry. The arm is now `lossy_jpeg()` in sensor.rs. The decoded 8-bit values are the stored samples, and BlackLevel, WhiteLevel (default 255 for 8-bit data) and the LinearizationTable apply to them exactly as for every other compression. A tile may be coded at the full tile size (edge tiles padded, as the spec says) or at the image's row count; a strip at its row count; the width must be the segment's. BitsPerSample must be 8 and the JPEG's component count must equal SamplesPerPixel (1 or 3); anything else is an error, never a silent conversion. The frame header is checked before any pixel is decoded and the JPEG decoder's own size cap is the segment the IFD declares (already charged against the limits), so a hostile SOF cannot size a buffer past the tile. testgen writes true 8-bit lossy fixtures (`LossyJpegTiles`, and strips via the new `LossyJpegStrips`), accepts pre-encoded `lossy_segments` for hostile-input tests, exposes `baseline_jpeg()`, and leaves WhiteLevel out when `white` is 0. The DNG tests cover CFA and LinearRaw RGB from tiles and strips at 37x23 (partial edge tiles, a short last strip), the default white level, black/white scaling and a LinearizationTable against the uncompressed path, and hostile inputs: a truncated tile, frame-size and component-count mismatches, a 65535x65535 SOF under default and tight limits, a tile over the allocation budget, and 12/16-bit or 4-sample files. The hostile mutation set gains a lossy CFA and a lossy LinearRaw file. The parity doc's DNG row is updated; the scorecard row is left for the coordinating branch. * Raw: measure the Nikon D90 image area (4288x2848 at (10, 10)) Aligning the decoded D90 sensor plane with the camera's own JPEG puts the image at (10, 10) in the 4352x2868 sensor plane, giving the camera's 4288x2848 frame (10-pixel margins; the right border reads the camera's flat 255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the camera's frame instead of the uncropped plane, and make a measured profile leave a file that carries its own colour calibration (a DNG) untouched. * Codecs: open Cineon (.cin) film frames read-only Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from the same Kodak header family: the generic header (big-endian, orientation at 192, channel count at 193, the channel-1 bits/dimensions), one or three channels, three 10-bit samples packed into each 32-bit word on a word boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the file's log black/white points are a display choice and are not applied. A depth other than 10 bits or a channel count other than 1/3 is Unsupported; truncation errors rather than panicking. Read-only (no Cineon writer), so .cin joins the open filters and Cineon read closes part of #1049's G10 gap. * Vector: bound flattening memory, keep over-budget dashes, cheaper edge build (#5195) - flatten: a path's flattened points are capped at 1 << 20; past it every curve keeps a proportional share of its pieces (at least one), so hostile handles from files (vmsk, SVG, effect outlines) cannot exhaust memory. fill_rasterizer flattens the whole path under one budget. - stroke: past the dash step budget (or below coordinate precision), dash_polyline keeps the dashes made so far and draws the rest solid instead of dropping the stroke. Open polylines are no longer copied. - raster: coordinates are clamped to +-1e15 and edges with a non-finite slope (vanishingly short) are skipped, so huge finite coordinates no longer produce NaN coverage. fill_rasterizer sorts edges once instead of after every component (stable sort, identical order). - Cleanups: dead miter `half`, dead loop-length check in trace_mask, shared mask render body, map_knots helper, shared straight-segment test. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * PSD: cap pattern memory across a parse, reject mixed-depth pattern channels (#5198) - Patterns: one PatternBudget (decoded bytes + zero padding) is shared by every pattern of a block, a .pat file and the pattern blocks of one document; .abr patt sections are charged to the samples' budget. - Patterns: a channel whose depth differs from the first is rejected (the parsed pattern could not be written back). - Slices: descriptor numbers no longer wrap; out-of-range ids are no id, coordinates clamp to i32, and a v6 trailing entry without a usable id attaches its outsets to no slice. - LayerInfo::unpadded_len is computed from field sizes instead of serializing every record into a scratch buffer. - abr desc presets are moved out instead of cloned; UnFl and shmd counts use the bounded preallocation; ImageData::decode_channel (decoded every plane to return one, unused outside its test) is removed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Vector: bound stroke outline points (#5211) - stroke_polygons dashes all lines first, then counts round caps and joins. When their full-resolution tessellation would exceed 1 << 20 outline points, every round cap and join gets the same smaller segment count (down to 4 per circle, 1 per join; area-exact radius kept). Strokes under the budget are unchanged; no piece is dropped. - The dash step budget (100000) is now shared by all lines of a stroke instead of per polyline, so many subpaths cannot multiply the dash (and cap) count. Past it the rest is drawn solid, as before. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * PSD: write tiff blocks without copies, inflate merged ZIP once - ImageSourceData::to_bytes writes the global mask and global blocks straight from the model with 4-byte alignment instead of cloning each block (data included) to set its padding. Same bytes. - The tiff transcoder's nested regions and blocks write into the parent's buffer (taken and handed back, error or not) instead of building their own output and copying it up per nesting level. Bodies that fail or are not transcoded are truncated before being copied as stored or dropped. Same bytes. - PsdFile::from_bytes_and_merged decodes the merged image with the parse when asked: a ZIP stream is inflated once (the decode's stream check is the parse's); the parse-only check runs only when the decode fails, to keep from_bytes' errors. PSD import uses it with merged_needed. - PsdBuilder::composite documents that Gray/CMYK composites stay straight. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Content-Aware Fill: measure a thin hole by its thickness, not its bounds (#1366) Removing long, thin objects (coiled guitar strings, wires) left their outline as darker and lighter blotches and copied pieces of other strings into the fill. The pyramid shrank until the hole's bounding box was four patches across: for a string across the image that is a level where the hole has swallowed its surroundings, so the matches found there copy whatever looks like the blur, and the finer levels (refine-only for wide bounds) keep them. A hole at most a quarter as thick as its bounds are long now counts as thin: the pyramid stops while it is still about two patches thick, and that level starts from a membrane across it (over a few pixels, the surroundings themselves) instead of the onion peel, whose exhaustive search is what made a shallow pyramid unaffordable. Compact holes are unchanged bit for bit. Refs #1366 * perf(compose,gpu): effect caches reserve tile addresses instead of pinning layers Effect map cache entries kept a clone of their layer (a deep clone for groups) so the tile addresses the cache key hashes couldn't be reused. That kept an edited or deleted layer's pixels alive, uncounted, until the entry was evicted. Keep a Weak to each hashed tile instead: it reserves the address without keeping the pixels. The GPU compositor's styled-group pins and shape-source tile snapshots do the same. Part of #4530. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(history): count snapshot-only tiles against the history budget History panel snapshots outlived every budget: a Merged Layers snapshot is a full flattened copy that neither the history budget, the GPU budget's document bytes nor Purge accounted for. Trim now counts the tiles only snapshots hold as fixed cost, the GPU budget includes them, and Purge > Histories no longer reports tiles a kept snapshot still holds as freed. Part of #4530. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Content-Aware Fill: every part of a thin selection keeps its surroundings (#1366) Two more causes of ghosts when removing strings and the small knobs selected with them: * Auto sampling summarises the selection's surroundings by a few clusters. Around a long selection those come from the strings' surroundings, so a small part elsewhere (a tuning knob in a differently coloured corner) lost its own surroundings and was filled from far away in another colour. Around a thin selection the Auto area now always reaches as far as the selection is thick. * The membrane that starts a thin hole now starts a patch radius out, past the anti-aliased fringe or halo that a selection drawn close to the object leaves outside it. Refs #1366 * Content-Aware Fill: peel a thin hole where that stays affordable (#1366) Starting every thin hole from a membrane smoothed Spot Healing on film grain (spot_healing_keeps_film_grain_through_overlapping_strokes: grain 9.0 against 12.1 around). The onion peel copies the grain; it was only given up because its exhaustive search is too slow on the big level a long thin hole stops at. It now starts the thin hole whenever hole cells times sources stay within 2^28 comparisons, and the membrane only beyond. Refs #1366 * Select Subject: keep subject parts coloured like the backdrop, leave enclosed gaps open Users on #2788 reported Select Subject dropping clothes that are close in colour to a plain wall and bridging the gap between an arm and the torso. Both come from the same place: the saliency pass labels low-contrast parts of the subject as background, the background colour model then learns them and explains them away, and the final blind hole fill closes every enclosed gap up to 5 % of the mask. Two changes in crates/algo: - A second GrabCut pass whose background model only knows the backdrop. A colour model fitted to the image frame (minus a margin around the salient blob, in case the subject runs out of the picture) marks every pixel it explains as probable background; the blob and whatever the backdrop cannot account for start as probable foreground. Only components that touch the first pass's result survive. - Hole filling that consults the colour models: specks (<= 0.2 % of the mask) always fill, larger holes up to 5 % fill only when their pixels fit the foreground model better than the background's. Tests: two regressions (a cream-shouldered figure on a near-white wall keeps its shoulders; a ring keeps its backdrop-coloured hole open), plus ignored timing and picture-dump helpers. The 6 MP first run goes from about 100 ms to about 200 ms on one core; the P29 repeat path is untouched. * Keyboard shortcut sets: Set menu, New Set, Save, Delete, .kys Export and Summarize (K2) Edit › Keyboard Shortcuts gets Photoshop's set management. A set is a saved copy of the bindings (Preferences.shortcutSets, the one in use in shortcutSet; "" is PhotoCraft Defaults), and the Set menu shows "(modified)" when the bindings differ from it. New Set…, Save and Delete wait for OK like the rest of the dialog. Export… writes the dialog's bindings as a .kys file (commands then tools, Photoshop's macOS key spelling), each row carrying our id as pc-id so PhotoCraft imports its own sets back exactly, whatever the label; Summarize… writes Photoshop's HTML list of every bound command by menu. edit.keyboardShortcuts takes useSet (before the call's edits), saveSet, deleteSet, sets and activeSet (after them), exportKys and summarize; every reply reports the sets, the set in use and whether it is modified. Bad names, keys or counts are errors that change nothing. * .kys import: tool keys and sets saved on Windows (K3) Photoshop's <tool> rows now import: each matches our tool by name (our tool names are Photoshop's) or by pc-id in sets PhotoCraft exported, and a letter other than the tool's own becomes its override, while its own letter keeps the tool cycling with the others (#5036). A set saved on Windows spells the primary modifier Ctrl where a Mac set writes Cmd and keeps Control for the Control key. A set with no Cmd or Opt anywhere but some Ctrl is read as a Windows set, its Ctrl as our Cmd: Ctrl+L is the Cmd+L default, not a Control-key override that would also mean Control on a Mac. The import reports `windows`. * cargo fmt the extension lists Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Gert Pellin <gert@pellin.be> Co-authored-by: Vikram Bhaskaran <vikram.bhaskaran@outlook.com> Co-authored-by: vangel76 <vangel1976@googlemail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Finn Newick <finnnk@gmail.com> Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Diego Chagas <drochachagas@gmail.com> Co-authored-by: Tanish Manku <tmanku.dev@gmail.com>	2026-10-15 00:54:55 -04:00
5 people	4446ec6d65	PSD: write tiff blocks without copies, inflate merged ZIP once (#5221) ... * Raw: measure the Nikon D90 image area (4288x2848 at (10, 10)) Aligning the decoded D90 sensor plane with the camera's own JPEG puts the image at (10, 10) in the 4352x2868 sensor plane, giving the camera's 4288x2848 frame (10-pixel margins; the right border reads the camera's flat 255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the camera's frame instead of the uncropped plane, and make a measured profile leave a file that carries its own colour calibration (a DNG) untouched. * Codecs: open Cineon (.cin) film frames read-only Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from the same Kodak header family: the generic header (big-endian, orientation at 192, channel count at 193, the channel-1 bits/dimensions), one or three channels, three 10-bit samples packed into each 32-bit word on a word boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the file's log black/white points are a display choice and are not applied. A depth other than 10 bits or a channel count other than 1/3 is Unsupported; truncation errors rather than panicking. Read-only (no Cineon writer), so .cin joins the open filters and Cineon read closes part of #1049's G10 gap. * PSD: write tiff blocks without copies, inflate merged ZIP once - ImageSourceData::to_bytes writes the global mask and global blocks straight from the model with 4-byte alignment instead of cloning each block (data included) to set its padding. Same bytes. - The tiff transcoder's nested regions and blocks write into the parent's buffer (taken and handed back, error or not) instead of building their own output and copying it up per nesting level. Bodies that fail or are not transcoded are truncated before being copied as stored or dropped. Same bytes. - PsdFile::from_bytes_and_merged decodes the merged image with the parse when asked: a ZIP stream is inflated once (the decode's stream check is the parse's); the parse-only check runs only when the decode fails, to keep from_bytes' errors. PSD import uses it with merged_needed. - PsdBuilder::composite documents that Gray/CMYK composites stay straight. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keyboard shortcut sets: Set menu, New Set, Save, Delete, .kys Export and Summarize (K2) Edit › Keyboard Shortcuts gets Photoshop's set management. A set is a saved copy of the bindings (Preferences.shortcutSets, the one in use in shortcutSet; "" is PhotoCraft Defaults), and the Set menu shows "(modified)" when the bindings differ from it. New Set…, Save and Delete wait for OK like the rest of the dialog. Export… writes the dialog's bindings as a .kys file (commands then tools, Photoshop's macOS key spelling), each row carrying our id as pc-id so PhotoCraft imports its own sets back exactly, whatever the label; Summarize… writes Photoshop's HTML list of every bound command by menu. edit.keyboardShortcuts takes useSet (before the call's edits), saveSet, deleteSet, sets and activeSet (after them), exportKys and summarize; every reply reports the sets, the set in use and whether it is modified. Bad names, keys or counts are errors that change nothing. * .kys import: tool keys and sets saved on Windows (K3) Photoshop's <tool> rows now import: each matches our tool by name (our tool names are Photoshop's) or by pc-id in sets PhotoCraft exported, and a letter other than the tool's own becomes its override, while its own letter keeps the tool cycling with the others (#5036). A set saved on Windows spells the primary modifier Ctrl where a Mac set writes Cmd and keeps Control for the Control key. A set with no Cmd or Opt anywhere but some Ctrl is read as a Windows set, its Ctrl as our Cmd: Ctrl+L is the Cmd+L default, not a Control-key override that would also mean Control on a Mac. The import reports `windows`. * cargo fmt the extension lists Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Vikram Bhaskaran <vikram.bhaskaran@outlook.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Tanish Manku <tmanku.dev@gmail.com>	2026-10-15 00:32:55 -04:00
3 people	5dafbeeafc	Codecs: open Cineon (.cin) film frames read-only (#4691) ... * Raw: measure the Nikon D90 image area (4288x2848 at (10, 10)) Aligning the decoded D90 sensor plane with the camera's own JPEG puts the image at (10, 10) in the 4352x2868 sensor plane, giving the camera's 4288x2848 frame (10-pixel margins; the right border reads the camera's flat 255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the camera's frame instead of the uncropped plane, and make a measured profile leave a file that carries its own colour calibration (a DNG) untouched. * Codecs: open Cineon (.cin) film frames read-only Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from the same Kodak header family: the generic header (big-endian, orientation at 192, channel count at 193, the channel-1 bits/dimensions), one or three channels, three 10-bit samples packed into each 32-bit word on a word boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the file's log black/white points are a display choice and are not applied. A depth other than 10 bits or a channel count other than 1/3 is Unsupported; truncation errors rather than panicking. Read-only (no Cineon writer), so .cin joins the open filters and Cineon read closes part of #1049's G10 gap. * cargo fmt the extension lists Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-15 00:23:03 -04:00
Vikram BhaskaranandBrandon Thomas	7edc7aa03d	Raw: measure the Nikon D90 image area (4288x2848 at (10, 10)) (#4323) ... Aligning the decoded D90 sensor plane with the camera's own JPEG puts the image at (10, 10) in the 4352x2868 sensor plane, giving the camera's 4288x2848 frame (10-pixel margins; the right border reads the camera's flat 255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the camera's frame instead of the uncropped plane, and make a measured profile leave a file that carries its own colour calibration (a DNG) untouched. Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-15 00:22:48 -04:00
3 people	524d608b50	feat(psd): editable Filter Gallery smart filters (Chrome) (#3426) ... * feat(psd): map Filter Gallery smart filters to filter.filterGallery (Chrome) A PSD smart filter from Filter > Filter Gallery (`GEfc`) was kept verbatim as psd.unsupportedFilter, so it could not be edited. Its effect stack (`GEfs` list of `GEfc` effects with `GEfk` effect enum and `GELv` visibility) now maps to `filter.filterGallery {effects, foreground, background}` when every effect and setting is modelled, and is written back as `GEfc` on export. Layout taken from a Photopea-authored PSD. The table starts with Chrome (`Chrm`: `Dtl ` detail, `Smth` smoothness). Stacks with other effects or unknown settings stay verbatim as before. * feat(smart-filters): edit Filter Gallery smart filters in the gallery dialog Double-clicking a Filter Gallery smart filter in the Layers panel did nothing. It now opens the Filter Gallery dialog with the recorded effect stack and colours, previewing on the pixels below that filter; OK updates the filter in place with layer.smartFilter.setParams (one history step). * fix(psd): read and write Photoshop's inline Filter Gallery effect Photoshop 27 writes a Filter Gallery smart filter with a single effect inline in `Fltr` (`GEfc { GEfk, <settings> }`) rather than as a `GEfs` list, so such files still opened as psd.unsupportedFilter. Both layouts are read now. A single visible effect is written inline as Photoshop does; several or hidden effects keep the list, which is the only layout with a visibility flag (`GELv`). --------- Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-14 15:13:20 -04:00
3 people	a62ef68ca2	CMYK: Hue/Saturation and Color Balance keep the black ink (#5000) ... * Modern Brightness/Contrast: Photoshop's brightness curve The modern brightness curve was a line rolled off by a v^P term. It sat up to 4 levels off Photoshop's in the highlights, and up to 2.3 levels off for lowered brightness. The curve is refit to the Photoshop ground truth we have: - the ±50 samples from 4759d12b; - the photoshop corpus's brightness +25 / contrast +30 files, inverted through the (exact) contrast curve. Raised, it is the line s*x (s = 1.375^(b/50)) up to a knee at 80/255, then a cubic Hermite to white with end slope s^-6.6. Lowered, it is the exact inverse of the curve raised by as much (the -50 samples confirm this to within a level). Every measured point is within about a level. For strong values the knee moves down so the curve stays monotone across -150..150. Brightness then contrast are evaluated through one 4096-entry table, built in 55 us. The GPU uses that same table through the Levels/Curves kernel instead of rebuilding the curves in WGSL, so GPU and CPU agree by construction. Photoshop oracles: rgb8/16/32 and gray8/16/32 brightness-contrast now pass (145 -> 151 of 258). The floor goes 133 -> 151. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK: Brightness/Contrast curves each ink, as Photoshop does Photoshop applies Brightness/Contrast in a CMYK document to each ink's stored value, 1 - ink, black included. Both the modern and the legacy curve do this; the cmyk8 brightness-contrast(-legacy) oracles match it within a level on every pixel of the files' own inks. Raising brightness takes ink away. We applied it to the screen colour instead. - cmyk_channel_adjustment gains Brightness/Contrast. apply_in builds the channel curve once (brightness_contrast_lut) and runs each separated ink through it (ink_through). - Destructive Image > Adjustments on a CMYK layer curves the stored inks directly, so it is exact; a selection mixes them. adjusted_channels now takes the per-pixel operation, and works out luma only for CMYK Threshold, which compares it. - The GPU leaves CMYK Brightness/Contrast to the CPU, like the other ink rules. cmyk8/16 brightness-contrast oracles, bad pixels: - modern: 72% -> 48-57%, max error 0.19 -> 0.09 - legacy: 71% -> 51-53% The rest is our separation of the RGB composite, not the rule. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK Threshold compares the inks' own luma, as Photoshop does Photoshop's CMYK Threshold splits on the Rec. 601 luma of the inks' plain complement, (1 - c)(1 - k) and so on, whatever the document's profile. On the files' own inks this puts every pixel of cmyk8 and cmyk16 threshold-128.psd on the right side of level 128. The profile's RGB luma missed 100. stored_channels works the luma out from the inks itself (ink_luma), so it no longer takes one; the engine's stored-channel path no longer converts each pixel to RGB at all. Through the separated RGB composite the cmyk threshold oracles drop from 1.6% to 0.2% bad pixels. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK legacy Brightness/Contrast pivots at 128 in ink Photoshop's legacy contrast pivots at level 128 of the ink, which is 127 of 255 of the stored value (1 - ink) that the curve runs on, not 128 as in RGB. On Photoshop's own 16-bit inks (cmyk16 brightness-contrast-legacy.psd) ours sat a constant 0.43 of a level above. That is exactly the one-level pivot shift times contrast +30's slope minus one; with the pivot moved, the inks match within 0.01. brightness_contrast_lut is now ink_brightness_contrast_lut, since its legacy curve is the CMYK one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK: adjustment layers composite on the document's own inks The compositor works in display RGB. In a CMYK document, an adjustment layer that Photoshop evaluates on the inks could only act on our separation of the RGB composite, and that separation's black differs from the file's. So even exact ink rules missed: CMYK Invert was 10% off, Levels and Curves 50-65%. The ink-native compositor (compose::native, until now only for flattening plain raster stacks) now takes adjustment layers too: - Invert, Posterize, Threshold and Brightness/Contrast (modern and legacy), and Levels and Curves on CMYK channels, prepared once (InkStack, InkOp) and applied to the straight inks. - Opacity and an unfeathered layer mask mix the inks linearly, as in Photoshop; raster layers' masks scale their coverage the same way. - A CMYK stack of plain raster layers and such adjustments renders this way for display, export and reduced views (render_cmyk, tiles in parallel); flattening and merging keep the adjusted inks exactly. - Stacks of raster layers alone keep the RGB compositor, which the GPU matches. The GPU already leaves these adjustments to the CPU. Photoshop oracles: cmyk8 and cmyk16 invert, posterize-4, threshold-128, levels, curves, brightness-contrast and brightness-contrast-legacy all pass (14 files), 151 -> 165 of 258; floor 151 -> 165. psd-tools and io corpora unchanged. 24 MP CMYK8 with one adjustment renders in 286 ms on the inks, against 442 ms through the RGB compositor. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK ink compositing inlines open groups The ink compositor gave up on any group. Now a group at full opacity without a mask is inlined: - a pass-through group's children composite straight onto the backdrop, so an adjustment inside it reaches the layers below; - an isolated (Normal) group of raster layers alone composites as its children would, since Normal is associative. An isolated group with an adjustment, which only sees the group's content, keeps the RGB compositor. So do a translucent group and an artboard. Nesting is bounded. psd-tools' CMYK adjustment files keep their swatches in pass-through groups. With #4948's fair comparison, curves_cmyk drops from 37% to 0.3% bad pixels and levels_cmyk from 14% to 0.2%. The photoshop corpus is unchanged at 165. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK: Hue/Saturation and Color Balance keep the black ink In a CMYK document Photoshop applies Hue/Saturation (not Colorize) and Color Balance to C, M and Y as the complement of an RGB colour, and leaves the black ink alone. On the photoshop corpus's own inks, cmyk16 hue-saturation.psd follows this on every pixel within half a level (cmyk8 within two), and color-balance within our RGB Color Balance's own error. We applied both to the separated screen colour, which also rewrote K. - adjust::cmy_adjustment and apply_cmy run the RGB adjustment once per band on (1 - c, 1 - m, 1 - y). - The ink compositor (InkOp::Cmy), the RGB compositor's CMYK branch and destructive Image > Adjustments (pixels::adjusted_cmy) use them. The GPU leaves these to the CPU in CMYK documents, as it does the other ink rules. - Colorize separates its colour again, black included, so it keeps the screen-colour path. cmyk8/16 oracles, bad pixels: - hue-saturation: 100% -> 0.4-0.7% - color-balance: 74% -> 25% Neither passes yet. Half a level of cyan ink is three levels of red through the profile at saturated cyan, and our RGB models leave that much. The pass count stays at 165. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * 32-bit: legacy Brightness/Contrast, Channel Mixer, Photo Filter and B&W tint unclipped In 32-bit documents Photoshop keeps these adjustments' results above 1 and below 0. On the photoshop corpus's rgb32/gray32 files: - Legacy Brightness/Contrast pivots its contrast at 127 of 255 (8/16-bit: 128) and is exact on every pixel. - Channel Mixer cuts each source percentage to 1/1024 toward zero, counts 255/512 of the constant and is exact on pure red, green, blue, black and white. - Photo Filter works on the linear samples, negative results included. - The Black & White tint is the Color blend mode without the clip at 1, as the blend mode is there; white tints to (1.05, 1.00, 0.87). We clipped all four to 0..1. The GPU kernels follow suit under F_HDR (the legacy pivot and the mixer's steps come from the planner), and the HDR parity test covers them. Photoshop oracles: rgb32 and gray32 brightness-contrast-legacy, rgb32 channel-mixer and black-white-tint pass (145 -> 149 of 258); floor 145 -> 149. rgb32 photo-filter improves (0.19 -> 0.035 max); the rest is its colour (#3790). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Modern brightness: knee at output 126, fit out to -95 and +150 psd-tools' brightnesscontrast_rgb.psd masks four Brightness/Contrast layers to their own columns. Read through the exact contrast curve, it gives Photoshop's brightness at -95, -31, +23 and +150, well past the +/-50 samples the first fit had. The +/-50 curve extrapolated badly there: 22 levels off at -95 and 25 at +150. Every setting puts the knee at about the same output level, not input. The roll-off's end slope falls as 1/(1 + 0.084 b). With the knee at 126/255 and that end slope, the cubic Hermite fits -95, -50, -31, +23, +25 and +50 within 1.4 levels. Past about +110 no such cubic stays below white, so there the roll-off is 1 - (1 - y0)(1 - u)^alpha, with the slope continuous at the knee. That gives +150 within 6 levels, where every curve family tried bottoms out. Lowered curves are still the inverse of raised ones. The photoshop corpus's six brightness-contrast oracles still pass. psd-tools brightnesscontrast_rgb goes from 0.13 to 0.020 max error and _grayscale from 0.098 to 0.016. The new measurements are pinned in modern_brightness_matches_photoshop. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Levels: whole levels at every step and Photoshop's shadow toe In 8 bits Photoshop rounds each of the three Levels steps to a whole level (half up): the input-range stretch (already modelled), the midtone gamma and the output range. A narrow output range therefore merges neighbouring gamma levels: psd-tools levels_rgb maps R 43..48 to 58 through a 0.47 channel gamma and the master's 48..255, where the unrounded curve gave 56..59 (3 levels off in blue). The gamma above 1 starts along a toe a*u - b*u^q of slope a = 2^gamma that joins the power curve with the same value and slope (q = 2.2, fitted). With the rounding, that is exact on 1116 of the 1118 levels of gamma 1.16, 1.22, 1.3, 1.78 and 2.0 oracles; the soft-min it replaces missed 52. Gamma below 1 stays the plain power curve (0.67 and 0.7: every level exact). Oracles: psd-tools levels_rgb 0.0118 -> 0.0039 (PASS); photoshop rgb8/stack-levels-curves-hue-posterize 0.2000 -> 0.0000 (PASS); rgb8 and gray8 levels.psd 0.0039 -> 0.0000; rgb16/gray16 0.0039 -> 0.0020. Floors: photoshop 145 -> 146, psd-tools 236 -> 238 (main is at 237). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Masks: feathers blur with exactly the feather's variance A mask feather is a Gaussian with sigma = feather, which we approximate with three box passes per axis. Whole-pixel boxes rounded the variance: a 6 px feather blurred like 6.48 px and a 3 px one like 3.46 px, so feathered edges were too soft by up to 4 levels against Photoshop (psd-tools mask-parameters-no-real-channel.psd: a 6 px vector and 3 px pixel feather). Each pass is now an "extended box" (Gwosdek et al. 2011): weight 1 on the whole radius and a fractional weight on the two samples beyond it, so three passes have variance sigma^2 exactly. It stays O(n), reusing the window's leaving sample for the low end weight (50 MP at a 1000 px feather: 180 ms parallel, was 172). psd-tools: mask-parameters-no-real-channel 0.0168 -> 0.0060 (PASS), layer_mask_data.psd 26.9 % -> 3.9 % of pixels off (psb 25.9 % -> 1.8 %). Corpus test 239 -> 240; floor 236 -> 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Lab: adjustment layers composite on the stored L, a and b The compositor reads a Lab document's layers through display RGB, which clips colours outside its gamut, so the adjustments Photoshop evaluates on L, a and b (Invert, Posterize, Threshold, Brightness/Contrast, Levels and Curves with Lab records) only saw the clipped colours: the photoshop corpus's Lab oracles were up to 11 levels off on saturated colours. compose::native_lab works a Lab stack of plain layers out on the stored values instead, like the CMYK ink path: Normal mixes L, a and b linearly, an opaque layer keeps them exactly, a layer mask scales the mix, and adjustment layers run adjust::lab_stored_op on each pixel. Stacks with such adjustments render for display this way; flattening a plain Lab stack keeps its stored values (exports no longer clip). Anything else (other blend modes, effects, other adjustments) keeps the RGB compositor. Photoshop oracles 145 -> 152: lab16 invert, posterize-4, levels, curves and brightness-contrast-legacy; lab8 invert and posterize-4. lab8 levels and legacy B/C come within a level (their 8-bit rules are #5143 and #5132). psd-tools and io unchanged; every round trip unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Threshold: split on Photoshop's luminosity of whole samples Photoshop's Threshold splits on the luminosity 0.30 R + 0.59 G + 0.11 B (the blend modes' lum, as Gradient Map uses), not the Rec. 601 grey, taken over the document's whole sample values: - 8 bits: 30 R + 59 G + 11 B > 100 level - 50, i.e. the luminosity rounded to a level with halves down reaches the level; - 16 bits: 30 R + 59 G + 11 B >= 100 x the level in 16 bits (round(level x 32768 / 255): mid grey 16448 is level 128); - 32 bits: the luminosity reaches the level. Exact on every pixel of psd-tools threshold_rgb (36432 px; Rec. 601 split 28 the other way), threshold_16bits_rgb (100) and threshold_16bits_ grayscale, and the photoshop corpus's rgb16 threshold-128. The sums are exact in f32, on the CPU and in the GPU kernel, so ties (grey exactly on the level) split the same way on both. psd-tools: threshold_rgb and threshold_16bits_rgb pass; corpus test 239 -> 241, floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Posterize: 16-bit documents bin the 16-bit sample, as Photoshop does At 16 bits Photoshop doesn't round to 8-bit levels before binning. It bins the 16-bit sample, floor(v16 * n / 32768), and lands on 8-bit levels through a 16-bit step: floor(b * 32768 / (n - 1)), converted with floor((o * 255 + 16384) / 32768). So the middle of 3 levels is 128 where 8 bits give 127, while 42.5 and 25.5 stay 42 and 25. Exact on every sample of psd-tools posterize_16bits_rgb (levels 3, 7, 13, 21) and posterize_16bits_grayscale (2, 6, 9, 11); the 8-bit rule missed up to half the range at bin edges. The same rule applies to CMYK and Lab channels at 16 bits: on the stored inks (#4945's native path) psd-tools posterize_16bits_cmyk goes from 4.26 % to 0.01 % of pixels off. 8-bit Posterize is unchanged. The GPU kernel runs the same rule; 16-bit layers reach it as half floats, so a sample within their precision of a bin edge can land in the neighbouring bin there (the CPU, which exports, is exact). psd-tools 239 -> 241; floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK: Posterize works on the stored values (1 - ink) Photoshop posterizes a CMYK channel's stored value, 1 - ink, not the ink: with levels whose steps are uneven (3, 7, 13, 21) the two differ, e.g. 3 levels take an ink of 85 to 128, where posterizing the ink drops it to none. psd-tools posterize_cmyk.psd goes from 13.8 % of pixels off to exact; psd-tools 241 -> 242, floor 242. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Groups: a pass-through clipping base with an adjustment renders isolated A pass-through group composites its children straight into the backdrop, so an adjustment layer inside reaches the layers beneath. When the group is the base of a clipping group and holds an adjustment layer, Photoshop renders it isolated instead: in psd-tools passthrough_clipping_mask_adjustment an Exposure in such a group leaves the layers beneath alone (we darkened them: half the image 170 levels off). The same group with a Linear Dodge child and no adjustment keeps reaching the backdrop (passthrough_clipping_mask_blendmode), and so do clipping-mask3/4/5, so the rule is the adjustment, not the clipping alone (isolating every pass-through clipping base broke those two). CPU compositor and GPU plan alike. psd-tools 239 -> 240; floor 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Raise corpus floors to the results of the landed adjustment fixes Photoshop-authored 165 -> 185 of 258, io 146 -> 148 of 170, psd-tools 242 -> 249 of 309, measured with the CMYK, Lab, 32-bit, Levels, Threshold, Posterize, feather and pass-through PRs merged together. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 14:12:06 -04:00
3 people	1e6f565a7b	CMYK: adjustment layers composite on the document's own inks (14 oracles pass) (#4945) ... * Modern Brightness/Contrast: Photoshop's brightness curve The modern brightness curve was a line rolled off by a v^P term. It sat up to 4 levels off Photoshop's in the highlights, and up to 2.3 levels off for lowered brightness. The curve is refit to the Photoshop ground truth we have: - the ±50 samples from 4759d12b; - the photoshop corpus's brightness +25 / contrast +30 files, inverted through the (exact) contrast curve. Raised, it is the line s*x (s = 1.375^(b/50)) up to a knee at 80/255, then a cubic Hermite to white with end slope s^-6.6. Lowered, it is the exact inverse of the curve raised by as much (the -50 samples confirm this to within a level). Every measured point is within about a level. For strong values the knee moves down so the curve stays monotone across -150..150. Brightness then contrast are evaluated through one 4096-entry table, built in 55 us. The GPU uses that same table through the Levels/Curves kernel instead of rebuilding the curves in WGSL, so GPU and CPU agree by construction. Photoshop oracles: rgb8/16/32 and gray8/16/32 brightness-contrast now pass (145 -> 151 of 258). The floor goes 133 -> 151. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK: Brightness/Contrast curves each ink, as Photoshop does Photoshop applies Brightness/Contrast in a CMYK document to each ink's stored value, 1 - ink, black included. Both the modern and the legacy curve do this; the cmyk8 brightness-contrast(-legacy) oracles match it within a level on every pixel of the files' own inks. Raising brightness takes ink away. We applied it to the screen colour instead. - cmyk_channel_adjustment gains Brightness/Contrast. apply_in builds the channel curve once (brightness_contrast_lut) and runs each separated ink through it (ink_through). - Destructive Image > Adjustments on a CMYK layer curves the stored inks directly, so it is exact; a selection mixes them. adjusted_channels now takes the per-pixel operation, and works out luma only for CMYK Threshold, which compares it. - The GPU leaves CMYK Brightness/Contrast to the CPU, like the other ink rules. cmyk8/16 brightness-contrast oracles, bad pixels: - modern: 72% -> 48-57%, max error 0.19 -> 0.09 - legacy: 71% -> 51-53% The rest is our separation of the RGB composite, not the rule. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK Threshold compares the inks' own luma, as Photoshop does Photoshop's CMYK Threshold splits on the Rec. 601 luma of the inks' plain complement, (1 - c)(1 - k) and so on, whatever the document's profile. On the files' own inks this puts every pixel of cmyk8 and cmyk16 threshold-128.psd on the right side of level 128. The profile's RGB luma missed 100. stored_channels works the luma out from the inks itself (ink_luma), so it no longer takes one; the engine's stored-channel path no longer converts each pixel to RGB at all. Through the separated RGB composite the cmyk threshold oracles drop from 1.6% to 0.2% bad pixels. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK legacy Brightness/Contrast pivots at 128 in ink Photoshop's legacy contrast pivots at level 128 of the ink, which is 127 of 255 of the stored value (1 - ink) that the curve runs on, not 128 as in RGB. On Photoshop's own 16-bit inks (cmyk16 brightness-contrast-legacy.psd) ours sat a constant 0.43 of a level above. That is exactly the one-level pivot shift times contrast +30's slope minus one; with the pivot moved, the inks match within 0.01. brightness_contrast_lut is now ink_brightness_contrast_lut, since its legacy curve is the CMYK one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK: adjustment layers composite on the document's own inks The compositor works in display RGB. In a CMYK document, an adjustment layer that Photoshop evaluates on the inks could only act on our separation of the RGB composite, and that separation's black differs from the file's. So even exact ink rules missed: CMYK Invert was 10% off, Levels and Curves 50-65%. The ink-native compositor (compose::native, until now only for flattening plain raster stacks) now takes adjustment layers too: - Invert, Posterize, Threshold and Brightness/Contrast (modern and legacy), and Levels and Curves on CMYK channels, prepared once (InkStack, InkOp) and applied to the straight inks. - Opacity and an unfeathered layer mask mix the inks linearly, as in Photoshop; raster layers' masks scale their coverage the same way. - A CMYK stack of plain raster layers and such adjustments renders this way for display, export and reduced views (render_cmyk, tiles in parallel); flattening and merging keep the adjusted inks exactly. - Stacks of raster layers alone keep the RGB compositor, which the GPU matches. The GPU already leaves these adjustments to the CPU. Photoshop oracles: cmyk8 and cmyk16 invert, posterize-4, threshold-128, levels, curves, brightness-contrast and brightness-contrast-legacy all pass (14 files), 151 -> 165 of 258; floor 151 -> 165. psd-tools and io corpora unchanged. 24 MP CMYK8 with one adjustment renders in 286 ms on the inks, against 442 ms through the RGB compositor. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK ink compositing inlines open groups The ink compositor gave up on any group. Now a group at full opacity without a mask is inlined: - a pass-through group's children composite straight onto the backdrop, so an adjustment inside it reaches the layers below; - an isolated (Normal) group of raster layers alone composites as its children would, since Normal is associative. An isolated group with an adjustment, which only sees the group's content, keeps the RGB compositor. So do a translucent group and an artboard. Nesting is bounded. psd-tools' CMYK adjustment files keep their swatches in pass-through groups. With #4948's fair comparison, curves_cmyk drops from 37% to 0.3% bad pixels and levels_cmyk from 14% to 0.2%. The photoshop corpus is unchanged at 165. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * 32-bit: legacy Brightness/Contrast, Channel Mixer, Photo Filter and B&W tint unclipped In 32-bit documents Photoshop keeps these adjustments' results above 1 and below 0. On the photoshop corpus's rgb32/gray32 files: - Legacy Brightness/Contrast pivots its contrast at 127 of 255 (8/16-bit: 128) and is exact on every pixel. - Channel Mixer cuts each source percentage to 1/1024 toward zero, counts 255/512 of the constant and is exact on pure red, green, blue, black and white. - Photo Filter works on the linear samples, negative results included. - The Black & White tint is the Color blend mode without the clip at 1, as the blend mode is there; white tints to (1.05, 1.00, 0.87). We clipped all four to 0..1. The GPU kernels follow suit under F_HDR (the legacy pivot and the mixer's steps come from the planner), and the HDR parity test covers them. Photoshop oracles: rgb32 and gray32 brightness-contrast-legacy, rgb32 channel-mixer and black-white-tint pass (145 -> 149 of 258); floor 145 -> 149. rgb32 photo-filter improves (0.19 -> 0.035 max); the rest is its colour (#3790). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Modern brightness: knee at output 126, fit out to -95 and +150 psd-tools' brightnesscontrast_rgb.psd masks four Brightness/Contrast layers to their own columns. Read through the exact contrast curve, it gives Photoshop's brightness at -95, -31, +23 and +150, well past the +/-50 samples the first fit had. The +/-50 curve extrapolated badly there: 22 levels off at -95 and 25 at +150. Every setting puts the knee at about the same output level, not input. The roll-off's end slope falls as 1/(1 + 0.084 b). With the knee at 126/255 and that end slope, the cubic Hermite fits -95, -50, -31, +23, +25 and +50 within 1.4 levels. Past about +110 no such cubic stays below white, so there the roll-off is 1 - (1 - y0)(1 - u)^alpha, with the slope continuous at the knee. That gives +150 within 6 levels, where every curve family tried bottoms out. Lowered curves are still the inverse of raised ones. The photoshop corpus's six brightness-contrast oracles still pass. psd-tools brightnesscontrast_rgb goes from 0.13 to 0.020 max error and _grayscale from 0.098 to 0.016. The new measurements are pinned in modern_brightness_matches_photoshop. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Levels: whole levels at every step and Photoshop's shadow toe In 8 bits Photoshop rounds each of the three Levels steps to a whole level (half up): the input-range stretch (already modelled), the midtone gamma and the output range. A narrow output range therefore merges neighbouring gamma levels: psd-tools levels_rgb maps R 43..48 to 58 through a 0.47 channel gamma and the master's 48..255, where the unrounded curve gave 56..59 (3 levels off in blue). The gamma above 1 starts along a toe a*u - b*u^q of slope a = 2^gamma that joins the power curve with the same value and slope (q = 2.2, fitted). With the rounding, that is exact on 1116 of the 1118 levels of gamma 1.16, 1.22, 1.3, 1.78 and 2.0 oracles; the soft-min it replaces missed 52. Gamma below 1 stays the plain power curve (0.67 and 0.7: every level exact). Oracles: psd-tools levels_rgb 0.0118 -> 0.0039 (PASS); photoshop rgb8/stack-levels-curves-hue-posterize 0.2000 -> 0.0000 (PASS); rgb8 and gray8 levels.psd 0.0039 -> 0.0000; rgb16/gray16 0.0039 -> 0.0020. Floors: photoshop 145 -> 146, psd-tools 236 -> 238 (main is at 237). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Masks: feathers blur with exactly the feather's variance A mask feather is a Gaussian with sigma = feather, which we approximate with three box passes per axis. Whole-pixel boxes rounded the variance: a 6 px feather blurred like 6.48 px and a 3 px one like 3.46 px, so feathered edges were too soft by up to 4 levels against Photoshop (psd-tools mask-parameters-no-real-channel.psd: a 6 px vector and 3 px pixel feather). Each pass is now an "extended box" (Gwosdek et al. 2011): weight 1 on the whole radius and a fractional weight on the two samples beyond it, so three passes have variance sigma^2 exactly. It stays O(n), reusing the window's leaving sample for the low end weight (50 MP at a 1000 px feather: 180 ms parallel, was 172). psd-tools: mask-parameters-no-real-channel 0.0168 -> 0.0060 (PASS), layer_mask_data.psd 26.9 % -> 3.9 % of pixels off (psb 25.9 % -> 1.8 %). Corpus test 239 -> 240; floor 236 -> 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Lab: adjustment layers composite on the stored L, a and b The compositor reads a Lab document's layers through display RGB, which clips colours outside its gamut, so the adjustments Photoshop evaluates on L, a and b (Invert, Posterize, Threshold, Brightness/Contrast, Levels and Curves with Lab records) only saw the clipped colours: the photoshop corpus's Lab oracles were up to 11 levels off on saturated colours. compose::native_lab works a Lab stack of plain layers out on the stored values instead, like the CMYK ink path: Normal mixes L, a and b linearly, an opaque layer keeps them exactly, a layer mask scales the mix, and adjustment layers run adjust::lab_stored_op on each pixel. Stacks with such adjustments render for display this way; flattening a plain Lab stack keeps its stored values (exports no longer clip). Anything else (other blend modes, effects, other adjustments) keeps the RGB compositor. Photoshop oracles 145 -> 152: lab16 invert, posterize-4, levels, curves and brightness-contrast-legacy; lab8 invert and posterize-4. lab8 levels and legacy B/C come within a level (their 8-bit rules are #5143 and #5132). psd-tools and io unchanged; every round trip unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Threshold: split on Photoshop's luminosity of whole samples Photoshop's Threshold splits on the luminosity 0.30 R + 0.59 G + 0.11 B (the blend modes' lum, as Gradient Map uses), not the Rec. 601 grey, taken over the document's whole sample values: - 8 bits: 30 R + 59 G + 11 B > 100 level - 50, i.e. the luminosity rounded to a level with halves down reaches the level; - 16 bits: 30 R + 59 G + 11 B >= 100 x the level in 16 bits (round(level x 32768 / 255): mid grey 16448 is level 128); - 32 bits: the luminosity reaches the level. Exact on every pixel of psd-tools threshold_rgb (36432 px; Rec. 601 split 28 the other way), threshold_16bits_rgb (100) and threshold_16bits_ grayscale, and the photoshop corpus's rgb16 threshold-128. The sums are exact in f32, on the CPU and in the GPU kernel, so ties (grey exactly on the level) split the same way on both. psd-tools: threshold_rgb and threshold_16bits_rgb pass; corpus test 239 -> 241, floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Posterize: 16-bit documents bin the 16-bit sample, as Photoshop does At 16 bits Photoshop doesn't round to 8-bit levels before binning. It bins the 16-bit sample, floor(v16 * n / 32768), and lands on 8-bit levels through a 16-bit step: floor(b * 32768 / (n - 1)), converted with floor((o * 255 + 16384) / 32768). So the middle of 3 levels is 128 where 8 bits give 127, while 42.5 and 25.5 stay 42 and 25. Exact on every sample of psd-tools posterize_16bits_rgb (levels 3, 7, 13, 21) and posterize_16bits_grayscale (2, 6, 9, 11); the 8-bit rule missed up to half the range at bin edges. The same rule applies to CMYK and Lab channels at 16 bits: on the stored inks (#4945's native path) psd-tools posterize_16bits_cmyk goes from 4.26 % to 0.01 % of pixels off. 8-bit Posterize is unchanged. The GPU kernel runs the same rule; 16-bit layers reach it as half floats, so a sample within their precision of a bin edge can land in the neighbouring bin there (the CPU, which exports, is exact). psd-tools 239 -> 241; floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK: Posterize works on the stored values (1 - ink) Photoshop posterizes a CMYK channel's stored value, 1 - ink, not the ink: with levels whose steps are uneven (3, 7, 13, 21) the two differ, e.g. 3 levels take an ink of 85 to 128, where posterizing the ink drops it to none. psd-tools posterize_cmyk.psd goes from 13.8 % of pixels off to exact; psd-tools 241 -> 242, floor 242. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Groups: a pass-through clipping base with an adjustment renders isolated A pass-through group composites its children straight into the backdrop, so an adjustment layer inside reaches the layers beneath. When the group is the base of a clipping group and holds an adjustment layer, Photoshop renders it isolated instead: in psd-tools passthrough_clipping_mask_adjustment an Exposure in such a group leaves the layers beneath alone (we darkened them: half the image 170 levels off). The same group with a Linear Dodge child and no adjustment keeps reaching the backdrop (passthrough_clipping_mask_blendmode), and so do clipping-mask3/4/5, so the rule is the adjustment, not the clipping alone (isolating every pass-through clipping base broke those two). CPU compositor and GPU plan alike. psd-tools 239 -> 240; floor 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 14:11:42 -04:00
3 people	92c7922230	CMYK: Brightness/Contrast curves each ink, as Photoshop does (#4930) ... * Modern Brightness/Contrast: Photoshop's brightness curve The modern brightness curve was a line rolled off by a v^P term. It sat up to 4 levels off Photoshop's in the highlights, and up to 2.3 levels off for lowered brightness. The curve is refit to the Photoshop ground truth we have: - the ±50 samples from 4759d12b; - the photoshop corpus's brightness +25 / contrast +30 files, inverted through the (exact) contrast curve. Raised, it is the line s*x (s = 1.375^(b/50)) up to a knee at 80/255, then a cubic Hermite to white with end slope s^-6.6. Lowered, it is the exact inverse of the curve raised by as much (the -50 samples confirm this to within a level). Every measured point is within about a level. For strong values the knee moves down so the curve stays monotone across -150..150. Brightness then contrast are evaluated through one 4096-entry table, built in 55 us. The GPU uses that same table through the Levels/Curves kernel instead of rebuilding the curves in WGSL, so GPU and CPU agree by construction. Photoshop oracles: rgb8/16/32 and gray8/16/32 brightness-contrast now pass (145 -> 151 of 258). The floor goes 133 -> 151. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK: Brightness/Contrast curves each ink, as Photoshop does Photoshop applies Brightness/Contrast in a CMYK document to each ink's stored value, 1 - ink, black included. Both the modern and the legacy curve do this; the cmyk8 brightness-contrast(-legacy) oracles match it within a level on every pixel of the files' own inks. Raising brightness takes ink away. We applied it to the screen colour instead. - cmyk_channel_adjustment gains Brightness/Contrast. apply_in builds the channel curve once (brightness_contrast_lut) and runs each separated ink through it (ink_through). - Destructive Image > Adjustments on a CMYK layer curves the stored inks directly, so it is exact; a selection mixes them. adjusted_channels now takes the per-pixel operation, and works out luma only for CMYK Threshold, which compares it. - The GPU leaves CMYK Brightness/Contrast to the CPU, like the other ink rules. cmyk8/16 brightness-contrast oracles, bad pixels: - modern: 72% -> 48-57%, max error 0.19 -> 0.09 - legacy: 71% -> 51-53% The rest is our separation of the RGB composite, not the rule. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK Threshold compares the inks' own luma, as Photoshop does Photoshop's CMYK Threshold splits on the Rec. 601 luma of the inks' plain complement, (1 - c)(1 - k) and so on, whatever the document's profile. On the files' own inks this puts every pixel of cmyk8 and cmyk16 threshold-128.psd on the right side of level 128. The profile's RGB luma missed 100. stored_channels works the luma out from the inks itself (ink_luma), so it no longer takes one; the engine's stored-channel path no longer converts each pixel to RGB at all. Through the separated RGB composite the cmyk threshold oracles drop from 1.6% to 0.2% bad pixels. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK legacy Brightness/Contrast pivots at 128 in ink Photoshop's legacy contrast pivots at level 128 of the ink, which is 127 of 255 of the stored value (1 - ink) that the curve runs on, not 128 as in RGB. On Photoshop's own 16-bit inks (cmyk16 brightness-contrast-legacy.psd) ours sat a constant 0.43 of a level above. That is exactly the one-level pivot shift times contrast +30's slope minus one; with the pivot moved, the inks match within 0.01. brightness_contrast_lut is now ink_brightness_contrast_lut, since its legacy curve is the CMYK one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * 32-bit: legacy Brightness/Contrast, Channel Mixer, Photo Filter and B&W tint unclipped In 32-bit documents Photoshop keeps these adjustments' results above 1 and below 0. On the photoshop corpus's rgb32/gray32 files: - Legacy Brightness/Contrast pivots its contrast at 127 of 255 (8/16-bit: 128) and is exact on every pixel. - Channel Mixer cuts each source percentage to 1/1024 toward zero, counts 255/512 of the constant and is exact on pure red, green, blue, black and white. - Photo Filter works on the linear samples, negative results included. - The Black & White tint is the Color blend mode without the clip at 1, as the blend mode is there; white tints to (1.05, 1.00, 0.87). We clipped all four to 0..1. The GPU kernels follow suit under F_HDR (the legacy pivot and the mixer's steps come from the planner), and the HDR parity test covers them. Photoshop oracles: rgb32 and gray32 brightness-contrast-legacy, rgb32 channel-mixer and black-white-tint pass (145 -> 149 of 258); floor 145 -> 149. rgb32 photo-filter improves (0.19 -> 0.035 max); the rest is its colour (#3790). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Modern brightness: knee at output 126, fit out to -95 and +150 psd-tools' brightnesscontrast_rgb.psd masks four Brightness/Contrast layers to their own columns. Read through the exact contrast curve, it gives Photoshop's brightness at -95, -31, +23 and +150, well past the +/-50 samples the first fit had. The +/-50 curve extrapolated badly there: 22 levels off at -95 and 25 at +150. Every setting puts the knee at about the same output level, not input. The roll-off's end slope falls as 1/(1 + 0.084 b). With the knee at 126/255 and that end slope, the cubic Hermite fits -95, -50, -31, +23, +25 and +50 within 1.4 levels. Past about +110 no such cubic stays below white, so there the roll-off is 1 - (1 - y0)(1 - u)^alpha, with the slope continuous at the knee. That gives +150 within 6 levels, where every curve family tried bottoms out. Lowered curves are still the inverse of raised ones. The photoshop corpus's six brightness-contrast oracles still pass. psd-tools brightnesscontrast_rgb goes from 0.13 to 0.020 max error and _grayscale from 0.098 to 0.016. The new measurements are pinned in modern_brightness_matches_photoshop. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Levels: whole levels at every step and Photoshop's shadow toe In 8 bits Photoshop rounds each of the three Levels steps to a whole level (half up): the input-range stretch (already modelled), the midtone gamma and the output range. A narrow output range therefore merges neighbouring gamma levels: psd-tools levels_rgb maps R 43..48 to 58 through a 0.47 channel gamma and the master's 48..255, where the unrounded curve gave 56..59 (3 levels off in blue). The gamma above 1 starts along a toe a*u - b*u^q of slope a = 2^gamma that joins the power curve with the same value and slope (q = 2.2, fitted). With the rounding, that is exact on 1116 of the 1118 levels of gamma 1.16, 1.22, 1.3, 1.78 and 2.0 oracles; the soft-min it replaces missed 52. Gamma below 1 stays the plain power curve (0.67 and 0.7: every level exact). Oracles: psd-tools levels_rgb 0.0118 -> 0.0039 (PASS); photoshop rgb8/stack-levels-curves-hue-posterize 0.2000 -> 0.0000 (PASS); rgb8 and gray8 levels.psd 0.0039 -> 0.0000; rgb16/gray16 0.0039 -> 0.0020. Floors: photoshop 145 -> 146, psd-tools 236 -> 238 (main is at 237). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Masks: feathers blur with exactly the feather's variance A mask feather is a Gaussian with sigma = feather, which we approximate with three box passes per axis. Whole-pixel boxes rounded the variance: a 6 px feather blurred like 6.48 px and a 3 px one like 3.46 px, so feathered edges were too soft by up to 4 levels against Photoshop (psd-tools mask-parameters-no-real-channel.psd: a 6 px vector and 3 px pixel feather). Each pass is now an "extended box" (Gwosdek et al. 2011): weight 1 on the whole radius and a fractional weight on the two samples beyond it, so three passes have variance sigma^2 exactly. It stays O(n), reusing the window's leaving sample for the low end weight (50 MP at a 1000 px feather: 180 ms parallel, was 172). psd-tools: mask-parameters-no-real-channel 0.0168 -> 0.0060 (PASS), layer_mask_data.psd 26.9 % -> 3.9 % of pixels off (psb 25.9 % -> 1.8 %). Corpus test 239 -> 240; floor 236 -> 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Lab: adjustment layers composite on the stored L, a and b The compositor reads a Lab document's layers through display RGB, which clips colours outside its gamut, so the adjustments Photoshop evaluates on L, a and b (Invert, Posterize, Threshold, Brightness/Contrast, Levels and Curves with Lab records) only saw the clipped colours: the photoshop corpus's Lab oracles were up to 11 levels off on saturated colours. compose::native_lab works a Lab stack of plain layers out on the stored values instead, like the CMYK ink path: Normal mixes L, a and b linearly, an opaque layer keeps them exactly, a layer mask scales the mix, and adjustment layers run adjust::lab_stored_op on each pixel. Stacks with such adjustments render for display this way; flattening a plain Lab stack keeps its stored values (exports no longer clip). Anything else (other blend modes, effects, other adjustments) keeps the RGB compositor. Photoshop oracles 145 -> 152: lab16 invert, posterize-4, levels, curves and brightness-contrast-legacy; lab8 invert and posterize-4. lab8 levels and legacy B/C come within a level (their 8-bit rules are #5143 and #5132). psd-tools and io unchanged; every round trip unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Threshold: split on Photoshop's luminosity of whole samples Photoshop's Threshold splits on the luminosity 0.30 R + 0.59 G + 0.11 B (the blend modes' lum, as Gradient Map uses), not the Rec. 601 grey, taken over the document's whole sample values: - 8 bits: 30 R + 59 G + 11 B > 100 level - 50, i.e. the luminosity rounded to a level with halves down reaches the level; - 16 bits: 30 R + 59 G + 11 B >= 100 x the level in 16 bits (round(level x 32768 / 255): mid grey 16448 is level 128); - 32 bits: the luminosity reaches the level. Exact on every pixel of psd-tools threshold_rgb (36432 px; Rec. 601 split 28 the other way), threshold_16bits_rgb (100) and threshold_16bits_ grayscale, and the photoshop corpus's rgb16 threshold-128. The sums are exact in f32, on the CPU and in the GPU kernel, so ties (grey exactly on the level) split the same way on both. psd-tools: threshold_rgb and threshold_16bits_rgb pass; corpus test 239 -> 241, floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Posterize: 16-bit documents bin the 16-bit sample, as Photoshop does At 16 bits Photoshop doesn't round to 8-bit levels before binning. It bins the 16-bit sample, floor(v16 * n / 32768), and lands on 8-bit levels through a 16-bit step: floor(b * 32768 / (n - 1)), converted with floor((o * 255 + 16384) / 32768). So the middle of 3 levels is 128 where 8 bits give 127, while 42.5 and 25.5 stay 42 and 25. Exact on every sample of psd-tools posterize_16bits_rgb (levels 3, 7, 13, 21) and posterize_16bits_grayscale (2, 6, 9, 11); the 8-bit rule missed up to half the range at bin edges. The same rule applies to CMYK and Lab channels at 16 bits: on the stored inks (#4945's native path) psd-tools posterize_16bits_cmyk goes from 4.26 % to 0.01 % of pixels off. 8-bit Posterize is unchanged. The GPU kernel runs the same rule; 16-bit layers reach it as half floats, so a sample within their precision of a bin edge can land in the neighbouring bin there (the CPU, which exports, is exact). psd-tools 239 -> 241; floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Groups: a pass-through clipping base with an adjustment renders isolated A pass-through group composites its children straight into the backdrop, so an adjustment layer inside reaches the layers beneath. When the group is the base of a clipping group and holds an adjustment layer, Photoshop renders it isolated instead: in psd-tools passthrough_clipping_mask_adjustment an Exposure in such a group leaves the layers beneath alone (we darkened them: half the image 170 levels off). The same group with a Linear Dodge child and no adjustment keeps reaching the backdrop (passthrough_clipping_mask_blendmode), and so do clipping-mask3/4/5, so the rule is the adjustment, not the clipping alone (isolating every pass-through clipping base broke those two). CPU compositor and GPU plan alike. psd-tools 239 -> 240; floor 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 14:11:19 -04:00
3 people	00c16f2c6d	Modern Brightness/Contrast: Photoshop's brightness curve (six oracles pass) (#4722) ... * Modern Brightness/Contrast: Photoshop's brightness curve The modern brightness curve was a line rolled off by a v^P term. It sat up to 4 levels off Photoshop's in the highlights, and up to 2.3 levels off for lowered brightness. The curve is refit to the Photoshop ground truth we have: - the ±50 samples from 4759d12b; - the photoshop corpus's brightness +25 / contrast +30 files, inverted through the (exact) contrast curve. Raised, it is the line s*x (s = 1.375^(b/50)) up to a knee at 80/255, then a cubic Hermite to white with end slope s^-6.6. Lowered, it is the exact inverse of the curve raised by as much (the -50 samples confirm this to within a level). Every measured point is within about a level. For strong values the knee moves down so the curve stays monotone across -150..150. Brightness then contrast are evaluated through one 4096-entry table, built in 55 us. The GPU uses that same table through the Levels/Curves kernel instead of rebuilding the curves in WGSL, so GPU and CPU agree by construction. Photoshop oracles: rgb8/16/32 and gray8/16/32 brightness-contrast now pass (145 -> 151 of 258). The floor goes 133 -> 151. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * 32-bit: legacy Brightness/Contrast, Channel Mixer, Photo Filter and B&W tint unclipped In 32-bit documents Photoshop keeps these adjustments' results above 1 and below 0. On the photoshop corpus's rgb32/gray32 files: - Legacy Brightness/Contrast pivots its contrast at 127 of 255 (8/16-bit: 128) and is exact on every pixel. - Channel Mixer cuts each source percentage to 1/1024 toward zero, counts 255/512 of the constant and is exact on pure red, green, blue, black and white. - Photo Filter works on the linear samples, negative results included. - The Black & White tint is the Color blend mode without the clip at 1, as the blend mode is there; white tints to (1.05, 1.00, 0.87). We clipped all four to 0..1. The GPU kernels follow suit under F_HDR (the legacy pivot and the mixer's steps come from the planner), and the HDR parity test covers them. Photoshop oracles: rgb32 and gray32 brightness-contrast-legacy, rgb32 channel-mixer and black-white-tint pass (145 -> 149 of 258); floor 145 -> 149. rgb32 photo-filter improves (0.19 -> 0.035 max); the rest is its colour (#3790). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Modern brightness: knee at output 126, fit out to -95 and +150 psd-tools' brightnesscontrast_rgb.psd masks four Brightness/Contrast layers to their own columns. Read through the exact contrast curve, it gives Photoshop's brightness at -95, -31, +23 and +150, well past the +/-50 samples the first fit had. The +/-50 curve extrapolated badly there: 22 levels off at -95 and 25 at +150. Every setting puts the knee at about the same output level, not input. The roll-off's end slope falls as 1/(1 + 0.084 b). With the knee at 126/255 and that end slope, the cubic Hermite fits -95, -50, -31, +23, +25 and +50 within 1.4 levels. Past about +110 no such cubic stays below white, so there the roll-off is 1 - (1 - y0)(1 - u)^alpha, with the slope continuous at the knee. That gives +150 within 6 levels, where every curve family tried bottoms out. Lowered curves are still the inverse of raised ones. The photoshop corpus's six brightness-contrast oracles still pass. psd-tools brightnesscontrast_rgb goes from 0.13 to 0.020 max error and _grayscale from 0.098 to 0.016. The new measurements are pinned in modern_brightness_matches_photoshop. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Levels: whole levels at every step and Photoshop's shadow toe In 8 bits Photoshop rounds each of the three Levels steps to a whole level (half up): the input-range stretch (already modelled), the midtone gamma and the output range. A narrow output range therefore merges neighbouring gamma levels: psd-tools levels_rgb maps R 43..48 to 58 through a 0.47 channel gamma and the master's 48..255, where the unrounded curve gave 56..59 (3 levels off in blue). The gamma above 1 starts along a toe a*u - b*u^q of slope a = 2^gamma that joins the power curve with the same value and slope (q = 2.2, fitted). With the rounding, that is exact on 1116 of the 1118 levels of gamma 1.16, 1.22, 1.3, 1.78 and 2.0 oracles; the soft-min it replaces missed 52. Gamma below 1 stays the plain power curve (0.67 and 0.7: every level exact). Oracles: psd-tools levels_rgb 0.0118 -> 0.0039 (PASS); photoshop rgb8/stack-levels-curves-hue-posterize 0.2000 -> 0.0000 (PASS); rgb8 and gray8 levels.psd 0.0039 -> 0.0000; rgb16/gray16 0.0039 -> 0.0020. Floors: photoshop 145 -> 146, psd-tools 236 -> 238 (main is at 237). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Masks: feathers blur with exactly the feather's variance A mask feather is a Gaussian with sigma = feather, which we approximate with three box passes per axis. Whole-pixel boxes rounded the variance: a 6 px feather blurred like 6.48 px and a 3 px one like 3.46 px, so feathered edges were too soft by up to 4 levels against Photoshop (psd-tools mask-parameters-no-real-channel.psd: a 6 px vector and 3 px pixel feather). Each pass is now an "extended box" (Gwosdek et al. 2011): weight 1 on the whole radius and a fractional weight on the two samples beyond it, so three passes have variance sigma^2 exactly. It stays O(n), reusing the window's leaving sample for the low end weight (50 MP at a 1000 px feather: 180 ms parallel, was 172). psd-tools: mask-parameters-no-real-channel 0.0168 -> 0.0060 (PASS), layer_mask_data.psd 26.9 % -> 3.9 % of pixels off (psb 25.9 % -> 1.8 %). Corpus test 239 -> 240; floor 236 -> 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Lab: adjustment layers composite on the stored L, a and b The compositor reads a Lab document's layers through display RGB, which clips colours outside its gamut, so the adjustments Photoshop evaluates on L, a and b (Invert, Posterize, Threshold, Brightness/Contrast, Levels and Curves with Lab records) only saw the clipped colours: the photoshop corpus's Lab oracles were up to 11 levels off on saturated colours. compose::native_lab works a Lab stack of plain layers out on the stored values instead, like the CMYK ink path: Normal mixes L, a and b linearly, an opaque layer keeps them exactly, a layer mask scales the mix, and adjustment layers run adjust::lab_stored_op on each pixel. Stacks with such adjustments render for display this way; flattening a plain Lab stack keeps its stored values (exports no longer clip). Anything else (other blend modes, effects, other adjustments) keeps the RGB compositor. Photoshop oracles 145 -> 152: lab16 invert, posterize-4, levels, curves and brightness-contrast-legacy; lab8 invert and posterize-4. lab8 levels and legacy B/C come within a level (their 8-bit rules are #5143 and #5132). psd-tools and io unchanged; every round trip unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Threshold: split on Photoshop's luminosity of whole samples Photoshop's Threshold splits on the luminosity 0.30 R + 0.59 G + 0.11 B (the blend modes' lum, as Gradient Map uses), not the Rec. 601 grey, taken over the document's whole sample values: - 8 bits: 30 R + 59 G + 11 B > 100 level - 50, i.e. the luminosity rounded to a level with halves down reaches the level; - 16 bits: 30 R + 59 G + 11 B >= 100 x the level in 16 bits (round(level x 32768 / 255): mid grey 16448 is level 128); - 32 bits: the luminosity reaches the level. Exact on every pixel of psd-tools threshold_rgb (36432 px; Rec. 601 split 28 the other way), threshold_16bits_rgb (100) and threshold_16bits_ grayscale, and the photoshop corpus's rgb16 threshold-128. The sums are exact in f32, on the CPU and in the GPU kernel, so ties (grey exactly on the level) split the same way on both. psd-tools: threshold_rgb and threshold_16bits_rgb pass; corpus test 239 -> 241, floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Posterize: 16-bit documents bin the 16-bit sample, as Photoshop does At 16 bits Photoshop doesn't round to 8-bit levels before binning. It bins the 16-bit sample, floor(v16 * n / 32768), and lands on 8-bit levels through a 16-bit step: floor(b * 32768 / (n - 1)), converted with floor((o * 255 + 16384) / 32768). So the middle of 3 levels is 128 where 8 bits give 127, while 42.5 and 25.5 stay 42 and 25. Exact on every sample of psd-tools posterize_16bits_rgb (levels 3, 7, 13, 21) and posterize_16bits_grayscale (2, 6, 9, 11); the 8-bit rule missed up to half the range at bin edges. The same rule applies to CMYK and Lab channels at 16 bits: on the stored inks (#4945's native path) psd-tools posterize_16bits_cmyk goes from 4.26 % to 0.01 % of pixels off. 8-bit Posterize is unchanged. The GPU kernel runs the same rule; 16-bit layers reach it as half floats, so a sample within their precision of a bin edge can land in the neighbouring bin there (the CPU, which exports, is exact). psd-tools 239 -> 241; floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Groups: a pass-through clipping base with an adjustment renders isolated A pass-through group composites its children straight into the backdrop, so an adjustment layer inside reaches the layers beneath. When the group is the base of a clipping group and holds an adjustment layer, Photoshop renders it isolated instead: in psd-tools passthrough_clipping_mask_adjustment an Exposure in such a group leaves the layers beneath alone (we darkened them: half the image 170 levels off). The same group with a Linear Dodge child and no adjustment keeps reaching the backdrop (passthrough_clipping_mask_blendmode), and so do clipping-mask3/4/5, so the rule is the adjustment, not the clipping alone (isolating every pass-through clipping base broke those two). CPU compositor and GPU plan alike. psd-tools 239 -> 240; floor 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 14:10:57 -04:00
3 people	4c450b3879	Lab: adjustment layers composite on the stored L, a and b (seven Lab oracles pass) (#5171) ... * 32-bit: legacy Brightness/Contrast, Channel Mixer, Photo Filter and B&W tint unclipped In 32-bit documents Photoshop keeps these adjustments' results above 1 and below 0. On the photoshop corpus's rgb32/gray32 files: - Legacy Brightness/Contrast pivots its contrast at 127 of 255 (8/16-bit: 128) and is exact on every pixel. - Channel Mixer cuts each source percentage to 1/1024 toward zero, counts 255/512 of the constant and is exact on pure red, green, blue, black and white. - Photo Filter works on the linear samples, negative results included. - The Black & White tint is the Color blend mode without the clip at 1, as the blend mode is there; white tints to (1.05, 1.00, 0.87). We clipped all four to 0..1. The GPU kernels follow suit under F_HDR (the legacy pivot and the mixer's steps come from the planner), and the HDR parity test covers them. Photoshop oracles: rgb32 and gray32 brightness-contrast-legacy, rgb32 channel-mixer and black-white-tint pass (145 -> 149 of 258); floor 145 -> 149. rgb32 photo-filter improves (0.19 -> 0.035 max); the rest is its colour (#3790). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Levels: whole levels at every step and Photoshop's shadow toe In 8 bits Photoshop rounds each of the three Levels steps to a whole level (half up): the input-range stretch (already modelled), the midtone gamma and the output range. A narrow output range therefore merges neighbouring gamma levels: psd-tools levels_rgb maps R 43..48 to 58 through a 0.47 channel gamma and the master's 48..255, where the unrounded curve gave 56..59 (3 levels off in blue). The gamma above 1 starts along a toe a*u - b*u^q of slope a = 2^gamma that joins the power curve with the same value and slope (q = 2.2, fitted). With the rounding, that is exact on 1116 of the 1118 levels of gamma 1.16, 1.22, 1.3, 1.78 and 2.0 oracles; the soft-min it replaces missed 52. Gamma below 1 stays the plain power curve (0.67 and 0.7: every level exact). Oracles: psd-tools levels_rgb 0.0118 -> 0.0039 (PASS); photoshop rgb8/stack-levels-curves-hue-posterize 0.2000 -> 0.0000 (PASS); rgb8 and gray8 levels.psd 0.0039 -> 0.0000; rgb16/gray16 0.0039 -> 0.0020. Floors: photoshop 145 -> 146, psd-tools 236 -> 238 (main is at 237). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Masks: feathers blur with exactly the feather's variance A mask feather is a Gaussian with sigma = feather, which we approximate with three box passes per axis. Whole-pixel boxes rounded the variance: a 6 px feather blurred like 6.48 px and a 3 px one like 3.46 px, so feathered edges were too soft by up to 4 levels against Photoshop (psd-tools mask-parameters-no-real-channel.psd: a 6 px vector and 3 px pixel feather). Each pass is now an "extended box" (Gwosdek et al. 2011): weight 1 on the whole radius and a fractional weight on the two samples beyond it, so three passes have variance sigma^2 exactly. It stays O(n), reusing the window's leaving sample for the low end weight (50 MP at a 1000 px feather: 180 ms parallel, was 172). psd-tools: mask-parameters-no-real-channel 0.0168 -> 0.0060 (PASS), layer_mask_data.psd 26.9 % -> 3.9 % of pixels off (psb 25.9 % -> 1.8 %). Corpus test 239 -> 240; floor 236 -> 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Lab: adjustment layers composite on the stored L, a and b The compositor reads a Lab document's layers through display RGB, which clips colours outside its gamut, so the adjustments Photoshop evaluates on L, a and b (Invert, Posterize, Threshold, Brightness/Contrast, Levels and Curves with Lab records) only saw the clipped colours: the photoshop corpus's Lab oracles were up to 11 levels off on saturated colours. compose::native_lab works a Lab stack of plain layers out on the stored values instead, like the CMYK ink path: Normal mixes L, a and b linearly, an opaque layer keeps them exactly, a layer mask scales the mix, and adjustment layers run adjust::lab_stored_op on each pixel. Stacks with such adjustments render for display this way; flattening a plain Lab stack keeps its stored values (exports no longer clip). Anything else (other blend modes, effects, other adjustments) keeps the RGB compositor. Photoshop oracles 145 -> 152: lab16 invert, posterize-4, levels, curves and brightness-contrast-legacy; lab8 invert and posterize-4. lab8 levels and legacy B/C come within a level (their 8-bit rules are #5143 and #5132). psd-tools and io unchanged; every round trip unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Threshold: split on Photoshop's luminosity of whole samples Photoshop's Threshold splits on the luminosity 0.30 R + 0.59 G + 0.11 B (the blend modes' lum, as Gradient Map uses), not the Rec. 601 grey, taken over the document's whole sample values: - 8 bits: 30 R + 59 G + 11 B > 100 level - 50, i.e. the luminosity rounded to a level with halves down reaches the level; - 16 bits: 30 R + 59 G + 11 B >= 100 x the level in 16 bits (round(level x 32768 / 255): mid grey 16448 is level 128); - 32 bits: the luminosity reaches the level. Exact on every pixel of psd-tools threshold_rgb (36432 px; Rec. 601 split 28 the other way), threshold_16bits_rgb (100) and threshold_16bits_ grayscale, and the photoshop corpus's rgb16 threshold-128. The sums are exact in f32, on the CPU and in the GPU kernel, so ties (grey exactly on the level) split the same way on both. psd-tools: threshold_rgb and threshold_16bits_rgb pass; corpus test 239 -> 241, floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Posterize: 16-bit documents bin the 16-bit sample, as Photoshop does At 16 bits Photoshop doesn't round to 8-bit levels before binning. It bins the 16-bit sample, floor(v16 * n / 32768), and lands on 8-bit levels through a 16-bit step: floor(b * 32768 / (n - 1)), converted with floor((o * 255 + 16384) / 32768). So the middle of 3 levels is 128 where 8 bits give 127, while 42.5 and 25.5 stay 42 and 25. Exact on every sample of psd-tools posterize_16bits_rgb (levels 3, 7, 13, 21) and posterize_16bits_grayscale (2, 6, 9, 11); the 8-bit rule missed up to half the range at bin edges. The same rule applies to CMYK and Lab channels at 16 bits: on the stored inks (#4945's native path) psd-tools posterize_16bits_cmyk goes from 4.26 % to 0.01 % of pixels off. 8-bit Posterize is unchanged. The GPU kernel runs the same rule; 16-bit layers reach it as half floats, so a sample within their precision of a bin edge can land in the neighbouring bin there (the CPU, which exports, is exact). psd-tools 239 -> 241; floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Groups: a pass-through clipping base with an adjustment renders isolated A pass-through group composites its children straight into the backdrop, so an adjustment layer inside reaches the layers beneath. When the group is the base of a clipping group and holds an adjustment layer, Photoshop renders it isolated instead: in psd-tools passthrough_clipping_mask_adjustment an Exposure in such a group leaves the layers beneath alone (we darkened them: half the image 170 levels off). The same group with a Linear Dodge child and no adjustment keeps reaching the backdrop (passthrough_clipping_mask_blendmode), and so do clipping-mask3/4/5, so the rule is the adjustment, not the clipping alone (isolating every pass-through clipping base broke those two). CPU compositor and GPU plan alike. psd-tools 239 -> 240; floor 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 14:10:36 -04:00
3 people	d24f6e9d5f	Levels: whole levels at every step and Photoshop's shadow toe (levels_rgb + stack oracle pass) (#5143) ... * 32-bit: legacy Brightness/Contrast, Channel Mixer, Photo Filter and B&W tint unclipped In 32-bit documents Photoshop keeps these adjustments' results above 1 and below 0. On the photoshop corpus's rgb32/gray32 files: - Legacy Brightness/Contrast pivots its contrast at 127 of 255 (8/16-bit: 128) and is exact on every pixel. - Channel Mixer cuts each source percentage to 1/1024 toward zero, counts 255/512 of the constant and is exact on pure red, green, blue, black and white. - Photo Filter works on the linear samples, negative results included. - The Black & White tint is the Color blend mode without the clip at 1, as the blend mode is there; white tints to (1.05, 1.00, 0.87). We clipped all four to 0..1. The GPU kernels follow suit under F_HDR (the legacy pivot and the mixer's steps come from the planner), and the HDR parity test covers them. Photoshop oracles: rgb32 and gray32 brightness-contrast-legacy, rgb32 channel-mixer and black-white-tint pass (145 -> 149 of 258); floor 145 -> 149. rgb32 photo-filter improves (0.19 -> 0.035 max); the rest is its colour (#3790). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Levels: whole levels at every step and Photoshop's shadow toe In 8 bits Photoshop rounds each of the three Levels steps to a whole level (half up): the input-range stretch (already modelled), the midtone gamma and the output range. A narrow output range therefore merges neighbouring gamma levels: psd-tools levels_rgb maps R 43..48 to 58 through a 0.47 channel gamma and the master's 48..255, where the unrounded curve gave 56..59 (3 levels off in blue). The gamma above 1 starts along a toe a*u - b*u^q of slope a = 2^gamma that joins the power curve with the same value and slope (q = 2.2, fitted). With the rounding, that is exact on 1116 of the 1118 levels of gamma 1.16, 1.22, 1.3, 1.78 and 2.0 oracles; the soft-min it replaces missed 52. Gamma below 1 stays the plain power curve (0.67 and 0.7: every level exact). Oracles: psd-tools levels_rgb 0.0118 -> 0.0039 (PASS); photoshop rgb8/stack-levels-curves-hue-posterize 0.2000 -> 0.0000 (PASS); rgb8 and gray8 levels.psd 0.0039 -> 0.0000; rgb16/gray16 0.0039 -> 0.0020. Floors: photoshop 145 -> 146, psd-tools 236 -> 238 (main is at 237). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Masks: feathers blur with exactly the feather's variance A mask feather is a Gaussian with sigma = feather, which we approximate with three box passes per axis. Whole-pixel boxes rounded the variance: a 6 px feather blurred like 6.48 px and a 3 px one like 3.46 px, so feathered edges were too soft by up to 4 levels against Photoshop (psd-tools mask-parameters-no-real-channel.psd: a 6 px vector and 3 px pixel feather). Each pass is now an "extended box" (Gwosdek et al. 2011): weight 1 on the whole radius and a fractional weight on the two samples beyond it, so three passes have variance sigma^2 exactly. It stays O(n), reusing the window's leaving sample for the low end weight (50 MP at a 1000 px feather: 180 ms parallel, was 172). psd-tools: mask-parameters-no-real-channel 0.0168 -> 0.0060 (PASS), layer_mask_data.psd 26.9 % -> 3.9 % of pixels off (psb 25.9 % -> 1.8 %). Corpus test 239 -> 240; floor 236 -> 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Threshold: split on Photoshop's luminosity of whole samples Photoshop's Threshold splits on the luminosity 0.30 R + 0.59 G + 0.11 B (the blend modes' lum, as Gradient Map uses), not the Rec. 601 grey, taken over the document's whole sample values: - 8 bits: 30 R + 59 G + 11 B > 100 level - 50, i.e. the luminosity rounded to a level with halves down reaches the level; - 16 bits: 30 R + 59 G + 11 B >= 100 x the level in 16 bits (round(level x 32768 / 255): mid grey 16448 is level 128); - 32 bits: the luminosity reaches the level. Exact on every pixel of psd-tools threshold_rgb (36432 px; Rec. 601 split 28 the other way), threshold_16bits_rgb (100) and threshold_16bits_ grayscale, and the photoshop corpus's rgb16 threshold-128. The sums are exact in f32, on the CPU and in the GPU kernel, so ties (grey exactly on the level) split the same way on both. psd-tools: threshold_rgb and threshold_16bits_rgb pass; corpus test 239 -> 241, floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Posterize: 16-bit documents bin the 16-bit sample, as Photoshop does At 16 bits Photoshop doesn't round to 8-bit levels before binning. It bins the 16-bit sample, floor(v16 * n / 32768), and lands on 8-bit levels through a 16-bit step: floor(b * 32768 / (n - 1)), converted with floor((o * 255 + 16384) / 32768). So the middle of 3 levels is 128 where 8 bits give 127, while 42.5 and 25.5 stay 42 and 25. Exact on every sample of psd-tools posterize_16bits_rgb (levels 3, 7, 13, 21) and posterize_16bits_grayscale (2, 6, 9, 11); the 8-bit rule missed up to half the range at bin edges. The same rule applies to CMYK and Lab channels at 16 bits: on the stored inks (#4945's native path) psd-tools posterize_16bits_cmyk goes from 4.26 % to 0.01 % of pixels off. 8-bit Posterize is unchanged. The GPU kernel runs the same rule; 16-bit layers reach it as half floats, so a sample within their precision of a bin edge can land in the neighbouring bin there (the CPU, which exports, is exact). psd-tools 239 -> 241; floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Groups: a pass-through clipping base with an adjustment renders isolated A pass-through group composites its children straight into the backdrop, so an adjustment layer inside reaches the layers beneath. When the group is the base of a clipping group and holds an adjustment layer, Photoshop renders it isolated instead: in psd-tools passthrough_clipping_mask_adjustment an Exposure in such a group leaves the layers beneath alone (we darkened them: half the image 170 levels off). The same group with a Linear Dodge child and no adjustment keeps reaching the backdrop (passthrough_clipping_mask_blendmode), and so do clipping-mask3/4/5, so the rule is the adjustment, not the clipping alone (isolating every pass-through clipping base broke those two). CPU compositor and GPU plan alike. psd-tools 239 -> 240; floor 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Empty commit to resync the pull request head --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 14:10:14 -04:00
3 people	620bccef42	32-bit: legacy Brightness/Contrast, Channel Mixer, Photo Filter and B&W tint unclipped, as in Photoshop (#5011) ... * 32-bit: legacy Brightness/Contrast, Channel Mixer, Photo Filter and B&W tint unclipped In 32-bit documents Photoshop keeps these adjustments' results above 1 and below 0. On the photoshop corpus's rgb32/gray32 files: - Legacy Brightness/Contrast pivots its contrast at 127 of 255 (8/16-bit: 128) and is exact on every pixel. - Channel Mixer cuts each source percentage to 1/1024 toward zero, counts 255/512 of the constant and is exact on pure red, green, blue, black and white. - Photo Filter works on the linear samples, negative results included. - The Black & White tint is the Color blend mode without the clip at 1, as the blend mode is there; white tints to (1.05, 1.00, 0.87). We clipped all four to 0..1. The GPU kernels follow suit under F_HDR (the legacy pivot and the mixer's steps come from the planner), and the HDR parity test covers them. Photoshop oracles: rgb32 and gray32 brightness-contrast-legacy, rgb32 channel-mixer and black-white-tint pass (145 -> 149 of 258); floor 145 -> 149. rgb32 photo-filter improves (0.19 -> 0.035 max); the rest is its colour (#3790). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Masks: feathers blur with exactly the feather's variance A mask feather is a Gaussian with sigma = feather, which we approximate with three box passes per axis. Whole-pixel boxes rounded the variance: a 6 px feather blurred like 6.48 px and a 3 px one like 3.46 px, so feathered edges were too soft by up to 4 levels against Photoshop (psd-tools mask-parameters-no-real-channel.psd: a 6 px vector and 3 px pixel feather). Each pass is now an "extended box" (Gwosdek et al. 2011): weight 1 on the whole radius and a fractional weight on the two samples beyond it, so three passes have variance sigma^2 exactly. It stays O(n), reusing the window's leaving sample for the low end weight (50 MP at a 1000 px feather: 180 ms parallel, was 172). psd-tools: mask-parameters-no-real-channel 0.0168 -> 0.0060 (PASS), layer_mask_data.psd 26.9 % -> 3.9 % of pixels off (psb 25.9 % -> 1.8 %). Corpus test 239 -> 240; floor 236 -> 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Threshold: split on Photoshop's luminosity of whole samples Photoshop's Threshold splits on the luminosity 0.30 R + 0.59 G + 0.11 B (the blend modes' lum, as Gradient Map uses), not the Rec. 601 grey, taken over the document's whole sample values: - 8 bits: 30 R + 59 G + 11 B > 100 level - 50, i.e. the luminosity rounded to a level with halves down reaches the level; - 16 bits: 30 R + 59 G + 11 B >= 100 x the level in 16 bits (round(level x 32768 / 255): mid grey 16448 is level 128); - 32 bits: the luminosity reaches the level. Exact on every pixel of psd-tools threshold_rgb (36432 px; Rec. 601 split 28 the other way), threshold_16bits_rgb (100) and threshold_16bits_ grayscale, and the photoshop corpus's rgb16 threshold-128. The sums are exact in f32, on the CPU and in the GPU kernel, so ties (grey exactly on the level) split the same way on both. psd-tools: threshold_rgb and threshold_16bits_rgb pass; corpus test 239 -> 241, floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Posterize: 16-bit documents bin the 16-bit sample, as Photoshop does At 16 bits Photoshop doesn't round to 8-bit levels before binning. It bins the 16-bit sample, floor(v16 * n / 32768), and lands on 8-bit levels through a 16-bit step: floor(b * 32768 / (n - 1)), converted with floor((o * 255 + 16384) / 32768). So the middle of 3 levels is 128 where 8 bits give 127, while 42.5 and 25.5 stay 42 and 25. Exact on every sample of psd-tools posterize_16bits_rgb (levels 3, 7, 13, 21) and posterize_16bits_grayscale (2, 6, 9, 11); the 8-bit rule missed up to half the range at bin edges. The same rule applies to CMYK and Lab channels at 16 bits: on the stored inks (#4945's native path) psd-tools posterize_16bits_cmyk goes from 4.26 % to 0.01 % of pixels off. 8-bit Posterize is unchanged. The GPU kernel runs the same rule; 16-bit layers reach it as half floats, so a sample within their precision of a bin edge can land in the neighbouring bin there (the CPU, which exports, is exact). psd-tools 239 -> 241; floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Groups: a pass-through clipping base with an adjustment renders isolated A pass-through group composites its children straight into the backdrop, so an adjustment layer inside reaches the layers beneath. When the group is the base of a clipping group and holds an adjustment layer, Photoshop renders it isolated instead: in psd-tools passthrough_clipping_mask_adjustment an Exposure in such a group leaves the layers beneath alone (we darkened them: half the image 170 levels off). The same group with a Linear Dodge child and no adjustment keeps reaching the backdrop (passthrough_clipping_mask_blendmode), and so do clipping-mask3/4/5, so the rule is the adjustment, not the clipping alone (isolating every pass-through clipping base broke those two). CPU compositor and GPU plan alike. psd-tools 239 -> 240; floor 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 14:03:03 -04:00
3 people	eb26e8f0d7	Masks: feathers blur with exactly the feather's variance (mask-parameters-no-real-channel passes) (#5163) ... * Masks: feathers blur with exactly the feather's variance A mask feather is a Gaussian with sigma = feather, which we approximate with three box passes per axis. Whole-pixel boxes rounded the variance: a 6 px feather blurred like 6.48 px and a 3 px one like 3.46 px, so feathered edges were too soft by up to 4 levels against Photoshop (psd-tools mask-parameters-no-real-channel.psd: a 6 px vector and 3 px pixel feather). Each pass is now an "extended box" (Gwosdek et al. 2011): weight 1 on the whole radius and a fractional weight on the two samples beyond it, so three passes have variance sigma^2 exactly. It stays O(n), reusing the window's leaving sample for the low end weight (50 MP at a 1000 px feather: 180 ms parallel, was 172). psd-tools: mask-parameters-no-real-channel 0.0168 -> 0.0060 (PASS), layer_mask_data.psd 26.9 % -> 3.9 % of pixels off (psb 25.9 % -> 1.8 %). Corpus test 239 -> 240; floor 236 -> 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Threshold: split on Photoshop's luminosity of whole samples Photoshop's Threshold splits on the luminosity 0.30 R + 0.59 G + 0.11 B (the blend modes' lum, as Gradient Map uses), not the Rec. 601 grey, taken over the document's whole sample values: - 8 bits: 30 R + 59 G + 11 B > 100 level - 50, i.e. the luminosity rounded to a level with halves down reaches the level; - 16 bits: 30 R + 59 G + 11 B >= 100 x the level in 16 bits (round(level x 32768 / 255): mid grey 16448 is level 128); - 32 bits: the luminosity reaches the level. Exact on every pixel of psd-tools threshold_rgb (36432 px; Rec. 601 split 28 the other way), threshold_16bits_rgb (100) and threshold_16bits_ grayscale, and the photoshop corpus's rgb16 threshold-128. The sums are exact in f32, on the CPU and in the GPU kernel, so ties (grey exactly on the level) split the same way on both. psd-tools: threshold_rgb and threshold_16bits_rgb pass; corpus test 239 -> 241, floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Posterize: 16-bit documents bin the 16-bit sample, as Photoshop does At 16 bits Photoshop doesn't round to 8-bit levels before binning. It bins the 16-bit sample, floor(v16 * n / 32768), and lands on 8-bit levels through a 16-bit step: floor(b * 32768 / (n - 1)), converted with floor((o * 255 + 16384) / 32768). So the middle of 3 levels is 128 where 8 bits give 127, while 42.5 and 25.5 stay 42 and 25. Exact on every sample of psd-tools posterize_16bits_rgb (levels 3, 7, 13, 21) and posterize_16bits_grayscale (2, 6, 9, 11); the 8-bit rule missed up to half the range at bin edges. The same rule applies to CMYK and Lab channels at 16 bits: on the stored inks (#4945's native path) psd-tools posterize_16bits_cmyk goes from 4.26 % to 0.01 % of pixels off. 8-bit Posterize is unchanged. The GPU kernel runs the same rule; 16-bit layers reach it as half floats, so a sample within their precision of a bin edge can land in the neighbouring bin there (the CPU, which exports, is exact). psd-tools 239 -> 241; floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Groups: a pass-through clipping base with an adjustment renders isolated A pass-through group composites its children straight into the backdrop, so an adjustment layer inside reaches the layers beneath. When the group is the base of a clipping group and holds an adjustment layer, Photoshop renders it isolated instead: in psd-tools passthrough_clipping_mask_adjustment an Exposure in such a group leaves the layers beneath alone (we darkened them: half the image 170 levels off). The same group with a Linear Dodge child and no adjustment keeps reaching the backdrop (passthrough_clipping_mask_blendmode), and so do clipping-mask3/4/5, so the rule is the adjustment, not the clipping alone (isolating every pass-through clipping base broke those two). CPU compositor and GPU plan alike. psd-tools 239 -> 240; floor 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 14:02:40 -04:00
3 people	9954c2935e	Threshold: split on Photoshop's luminosity of whole samples (threshold_rgb, threshold_16bits_rgb pass) (#5263) ... * Threshold: split on Photoshop's luminosity of whole samples Photoshop's Threshold splits on the luminosity 0.30 R + 0.59 G + 0.11 B (the blend modes' lum, as Gradient Map uses), not the Rec. 601 grey, taken over the document's whole sample values: - 8 bits: 30 R + 59 G + 11 B > 100 level - 50, i.e. the luminosity rounded to a level with halves down reaches the level; - 16 bits: 30 R + 59 G + 11 B >= 100 x the level in 16 bits (round(level x 32768 / 255): mid grey 16448 is level 128); - 32 bits: the luminosity reaches the level. Exact on every pixel of psd-tools threshold_rgb (36432 px; Rec. 601 split 28 the other way), threshold_16bits_rgb (100) and threshold_16bits_ grayscale, and the photoshop corpus's rgb16 threshold-128. The sums are exact in f32, on the CPU and in the GPU kernel, so ties (grey exactly on the level) split the same way on both. psd-tools: threshold_rgb and threshold_16bits_rgb pass; corpus test 239 -> 241, floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Posterize: 16-bit documents bin the 16-bit sample, as Photoshop does At 16 bits Photoshop doesn't round to 8-bit levels before binning. It bins the 16-bit sample, floor(v16 * n / 32768), and lands on 8-bit levels through a 16-bit step: floor(b * 32768 / (n - 1)), converted with floor((o * 255 + 16384) / 32768). So the middle of 3 levels is 128 where 8 bits give 127, while 42.5 and 25.5 stay 42 and 25. Exact on every sample of psd-tools posterize_16bits_rgb (levels 3, 7, 13, 21) and posterize_16bits_grayscale (2, 6, 9, 11); the 8-bit rule missed up to half the range at bin edges. The same rule applies to CMYK and Lab channels at 16 bits: on the stored inks (#4945's native path) psd-tools posterize_16bits_cmyk goes from 4.26 % to 0.01 % of pixels off. 8-bit Posterize is unchanged. The GPU kernel runs the same rule; 16-bit layers reach it as half floats, so a sample within their precision of a bin edge can land in the neighbouring bin there (the CPU, which exports, is exact). psd-tools 239 -> 241; floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Groups: a pass-through clipping base with an adjustment renders isolated A pass-through group composites its children straight into the backdrop, so an adjustment layer inside reaches the layers beneath. When the group is the base of a clipping group and holds an adjustment layer, Photoshop renders it isolated instead: in psd-tools passthrough_clipping_mask_adjustment an Exposure in such a group leaves the layers beneath alone (we darkened them: half the image 170 levels off). The same group with a Linear Dodge child and no adjustment keeps reaching the backdrop (passthrough_clipping_mask_blendmode), and so do clipping-mask3/4/5, so the rule is the adjustment, not the clipping alone (isolating every pass-through clipping base broke those two). CPU compositor and GPU plan alike. psd-tools 239 -> 240; floor 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 14:02:26 -04:00
3 people	3feebb9b13	Groups: a pass-through clipping base with an adjustment renders isolated (passthrough_clipping_mask_adjustment passes) (#5272) ... * Posterize: 16-bit documents bin the 16-bit sample, as Photoshop does At 16 bits Photoshop doesn't round to 8-bit levels before binning. It bins the 16-bit sample, floor(v16 * n / 32768), and lands on 8-bit levels through a 16-bit step: floor(b * 32768 / (n - 1)), converted with floor((o * 255 + 16384) / 32768). So the middle of 3 levels is 128 where 8 bits give 127, while 42.5 and 25.5 stay 42 and 25. Exact on every sample of psd-tools posterize_16bits_rgb (levels 3, 7, 13, 21) and posterize_16bits_grayscale (2, 6, 9, 11); the 8-bit rule missed up to half the range at bin edges. The same rule applies to CMYK and Lab channels at 16 bits: on the stored inks (#4945's native path) psd-tools posterize_16bits_cmyk goes from 4.26 % to 0.01 % of pixels off. 8-bit Posterize is unchanged. The GPU kernel runs the same rule; 16-bit layers reach it as half floats, so a sample within their precision of a bin edge can land in the neighbouring bin there (the CPU, which exports, is exact). psd-tools 239 -> 241; floor 236 -> 241. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Groups: a pass-through clipping base with an adjustment renders isolated A pass-through group composites its children straight into the backdrop, so an adjustment layer inside reaches the layers beneath. When the group is the base of a clipping group and holds an adjustment layer, Photoshop renders it isolated instead: in psd-tools passthrough_clipping_mask_adjustment an Exposure in such a group leaves the layers beneath alone (we darkened them: half the image 170 levels off). The same group with a Linear Dodge child and no adjustment keeps reaching the backdrop (passthrough_clipping_mask_blendmode), and so do clipping-mask3/4/5, so the rule is the adjustment, not the clipping alone (isolating every pass-through clipping base broke those two). CPU compositor and GPU plan alike. psd-tools 239 -> 240; floor 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 14:01:50 -04:00
3 people	8504dc615e	Posterize: 16-bit documents bin the 16-bit sample, as Photoshop does (#5267) ... At 16 bits Photoshop doesn't round to 8-bit levels before binning. It bins the 16-bit sample, floor(v16 * n / 32768), and lands on 8-bit levels through a 16-bit step: floor(b * 32768 / (n - 1)), converted with floor((o * 255 + 16384) / 32768). So the middle of 3 levels is 128 where 8 bits give 127, while 42.5 and 25.5 stay 42 and 25. Exact on every sample of psd-tools posterize_16bits_rgb (levels 3, 7, 13, 21) and posterize_16bits_grayscale (2, 6, 9, 11); the 8-bit rule missed up to half the range at bin edges. The same rule applies to CMYK and Lab channels at 16 bits: on the stored inks (#4945's native path) psd-tools posterize_16bits_cmyk goes from 4.26 % to 0.01 % of pixels off. 8-bit Posterize is unchanged. The GPU kernel runs the same rule; 16-bit layers reach it as half floats, so a sample within their precision of a bin edge can land in the neighbouring bin there (the CPU, which exports, is exact). psd-tools 239 -> 241; floor 236 -> 241. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 14:01:01 -04:00
3 people	93a16218de	Gradient Map is driven by the W3C luminosity, as in Photoshop (#5018) ... Photoshop's Gradient Map picks each pixel's place on the gradient by 0.3 R + 0.59 G + 0.11 B, the luminosity of the blend modes. We used the Rec. 601 grey (0.299, 0.587, 0.114). That is a few thousandths off, but it is enough to land two levels away on steep stretches of a gradient. The photoshop corpus's rgb8 and rgb16 gradient-map.psd now pass (they were 2 levels off on 0.8-1.7% of pixels). Sampling the gradient through a 256- or 1024-entry table didn't help; the weights did. CPU (compose::adjust) and GPU (the shader's lum) both change. Lab documents keep their Gradient Map driven by L, and grey pixels map as before. Photoshop oracles 145 -> 147 of 258; floor 145 -> 147. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 12:44:59 -04:00
Timothy DalyandClaude Opus 5.5	ff57499774	PSD: Mt16/Mt32 blocks mark the merged image's transparency (#5178) ... The merged image carries its transparency in the first extra channel when the layer count is stored negative, or when a "Saving Merged Transparency" global block (Mtrn, Mt16, Mt32) is present. Photoshop saves 32-bit documents the second way: a positive layer count, Mt32, and a fourth channel named "Transparency" (psd-tools transparentbg). merged_has_alpha only knew the first, so opening such a file added a "Transparency" alpha channel to the document, and the oracle compared it as if it were opaque white (83.7 % of pixels off; now 0.9 %, all on the shape's edge). Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-14 01:59:32 -04:00
Marco Arnulfo	e4f005d3dc	Palette PNGs open in Indexed Color mode with their colour table (part of #4804) (#4817)	2026-10-13 12:33:39 -04:00
3 people	becc27ac1c	CMYK: Invert, Posterize and Threshold on the inks; 16-bit Lab Invert keeps greys neutral (#3930) ... * Lab and CMYK: Invert, Posterize and Threshold work on the document's channels Photoshop applies these to each stored channel, not to RGB: - Lab: Invert and Posterize work on L, a and b, and Threshold cuts on L to a neutral black or white. - CMYK: Invert and Posterize work on each ink, black included, so paper inverts to 400% ink. Threshold gives paper or 100% black ink. Adjustment layers now do the same: - compose::adjust::apply_mode goes through the document's Lab or CMYK channels. - The GPU falls back to the CPU for these, as it already does for Lab/CMYK Levels and Curves. - The destructive Image > Adjustments path works on the stored samples directly, so it is exact. Photoshop oracles (lab/cmyk 8 and 16 bit), bad pixels before -> after: - lab threshold: PASS (was 12%) - lab invert: 72-99% -> 1% - lab posterize: 89% -> 0.1% - cmyk invert: 77% -> 10% - cmyk posterize: 71% -> 9% - cmyk threshold: 37% -> 1.6% Floor 133 -> 139 (137 already passed on main). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CMYK: Invert, Posterize and Threshold on the inks; 16-bit Lab Invert keeps greys neutral Builds on main's adjust::apply_in (#4038): - apply_in's mode dispatch gains CMYK. Invert and Posterize work on each ink, black included, so paper inverts to 400% ink. Threshold gives paper or 100% black ink alone. cmyk_channel_adjustment says which adjustments do this. - Lab Invert mirrors a and b around neutral at 16 bits; 8-bit bytes still become 255 - v. stored_channels holds both rules, and apply_lab uses it. - Destructive Image > Adjustments on a Lab or CMYK layer works on its stored channels directly, so it is exact; a selection mixes the stored values. - The GPU leaves CMYK Invert, Posterize and Threshold to the CPU. Photoshop oracles, bad pixels: - cmyk invert: 77% -> 10% - cmyk posterize: 71% -> 9% - cmyk threshold: 37% -> 1.6% - lab16 invert: 52% -> 1.2% The count stays at 145/258, which main already passes, so the floor goes 133 -> 145. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-13 01:38:52 -04:00
3 people	3a307a757e	Play real Photoshop action sets: TrueGrit .atn mappings and fixes (#4356, #219) (#4698) ... Third-party action sets that load since 3204231 now play. Four TrueGrit Texture Supply sets (Debaser, Distress Press, Halftone Zine Machine, Transparency) go from 223 to 3 unmapped steps of 533 and play end to end. - .atn import, 108 -> 112 events: Select and Mask (refineSelectionEdge), Filter Gallery Spatter (GEfc), Ripple, Crystallize; targeting the layer mask or composite channel, loading the targeted channel, Step Backward/Forward, removeFromSelection (it silently imported as a plain select), Pattern Fill layers (by name), nudges in points, Layer From Background, Grayscale/Bitmap mode objects, Image Size by resolution. - Engine: layer.translate units pt; layer.select mode remove; select.loadSelection channel targeted; image.imageSize keepPrintSize; layer.new.layerFromBackground ifPresent/select; pattern.import data. New from Clipboard keeps the copied document's resolution (was 72 ppi). - Filters: Spatter's Smoothness smooths the displacement (torn but attached edges, as Photoshop's); Crystallize fills a cell from its point instead of the average, so masks keep hard edges. - UI: .pat opens/drops into the Patterns panel (no UI import existed). - Docs: gaps G11, file-format and target-app parity. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-13 01:10:58 -04:00
3 people	10ba166a82	feat(codecs): open DDS textures, uncompressed and BC1-BC3 (#1327) (#4255) ... A read-only DirectDraw Surface codec on the model of PCX: the top mip level of a 2D texture, uncompressed (channel masks, RGB or luminance, 8 to 32 bits) or BC1/BC2/BC3 (DXT1/3/5), with the legacy or the DX10 header. Cubemaps, arrays, volumes and other formats are refused with an Unsupported error naming what was found; every header field is treated as hostile (checked sizes, limits before allocating, no indexing on file offsets). Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-12 21:47:16 -04:00
3 people	0002d861ee	fix(io): read CS2 placed layers that carry only a PlLd block (#2465) (#4268) ... Photoshop CS2 predates SoLd: its smart objects have a PlLd (plcL) block alone, with the embedded file in a global lnkD block. Import only read SoLd/SoLE, so such layers got an empty source id and Edit Contents said "the smart object's contents are unavailable". Parse PlLd from the Adobe PSD spec (unique id and the 8 corner doubles). PlLd stores no source size, so the transform takes it from the embedded file's header (linked::source_size_probe: PSD, TIFF, PNG and JPEG headers, any other image decoded flat by photocraft-codecs). It never imports the file as a document: a layered TIFF can carry PSD layer data whose lnkD holds another file, so that would nest without bound. Without the file, 100 % scale is assumed. source_geometry moves to linked.rs. Non-parallelogram corners give the projective placement as for SoLd. An unreadable PlLd is reported as a warning. The PlLd corners are the same placed quad as SoLd's Trnf, so they frame the same source-space box (#3677, blocks::placed_frame): the bounding box of a single-patch custom warp's 16 control points, which may spill past the source, else the source rect. corners_affine now maps such a frame onto the corners and is shared by parse_smart and plld_transform, which is the inverse of smart_map::quad_points (what plld_bytes writes): affine corners frame placed_frame(warp), projective ones the source rect. A custom warp's box needs no source size, so a spilled mesh is placed right even without the embedded file. corners_affine refuses non-finite corners or an empty frame (identity, as before). CS2 can warp a smart object, and PlLd keeps that warp after the corners (u32 warp version, then a versioned warp descriptor). It is read with the same code as the SoLd warp (warp_of), so a re-render from the now available source (Free Transform, Image Size, mode changes) stays warped. A stored warp that can't be read leaves the contents unavailable, keeping the warped pixels, with a warning. An edited PlLd-only layer (moved, transformed, warped, filtered or given other contents) is saved like any other smart object, SoLd plus a regenerated PlLd, with its current placement; an unedited one keeps its record verbatim, as does one whose file isn't embedded (its id is never read as a disk path). plld_edited compares against plld_transform with the record's own warp, so it uses the same frame as import and as the writer. A layer with both SoLE and PlLd is read from SoLE. Tests: PlLd round trip and malformed input (truncation, bad magic, oversized Pascal length, NaN) in blocks.rs; PlLd warps round trip through plld_bytes (preset, custom mesh, identity, none) and unreadable warps are reported as such; a PlLd whose custom mesh spills past the source places like the equivalent SoLd, with and without the source size; PlLd-only layers with a missing file, a broken record, a warp or an unreadable warp; a spilled-mesh PlLd-only layer imports with the SoLd layer's placement and an unedited one saves its PlLd verbatim (no SoLd) and reopens in place; and engine tests that rewrite an export into the CS2 layout (no SoLd, lnkD with version-2 liFD items) and check transform, contents, re-render, Edit Contents, and that a warped smart object re-renders warped. source_size_probe has header tests for each format and malformed JPEG marker walks. Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-12 21:44:49 -04:00
3 people	13657f35f2	Docs: refresh target-app-parity and file-format-parity against main (#4417) (#4418) ... Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-12 20:04:19 -04:00
3 people	f48a72cbe3	Codecs: open and save DPX frames (#1049) (#4104) ... Read SMPTE 268M DPX in both byte orders (SDPX, XPDS): the first image element, descriptor 6 (luma), 50 (RGB) or 51 (RGBA), at 8, 10, 12 or 16 bits, with 10-bit packing 0, 1 (method A) or 2 (method B) and 12-bit packing 0 or 1. 10- and 12-bit code values open as U16 round(c * 65535 / (2^b - 1)) and come back exactly when written at their depth. No colour transform: the transfer characteristic and colorimetric specification are reported as import notes; extra image elements are reported; the orientation is applied on import. Write big-endian, one unencoded element, at 8, 10, 12 or 16 bits (EncodeOptions::dpx_bits; `dpxBits` on the save commands, MCP and RPC; `--dpx-bits` in the CLI), following the document depth by default. Gray with alpha is written as luma. Creator, project, copyright, creation time, transfer, colorimetric, frame position, frame rate and time code travel as DPX:* text metadata and are written back. Unsupported descriptors, signed or run-length-encoded data and other bit depths return CodecError::Unsupported; malformed and truncated files return errors. Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-12 19:44:04 -04:00
Fabio Lissi	90c42f5555	Map Place, Open, Image Size in percent, the Paint Bucket and Insert Conditional (#219) (#4470) ... - image.imageSize takes percent (both sides; an explicit side wins). - actions.conditional {if, then, else}: Photoshop's Insert Conditional as a step, 33 conditions on the document (shape, mode, depth, selection, layers, alpha channels, unsaved) and the active layer (kind, locks, visibility, masks, effects); a failing branch stops the caller. - .atn events: placeEvent → file.placeEmbedded/placeLinked (path, scale), open → file.openAs, imageSize in percent, fill from a point → paint.bucket (pixels), conditional. 105 → 108. - Panel labels conditional steps as 'If cond → then / else'.	2026-10-12 19:12:35 -04:00
Fabio Lissi	13f5c104f6	Map the remaining frequent Photoshop action events (#219) (#4465) ... - edit.transform gains the relative form (scaleX/scaleY %, rotate, dx/dy about the frame centre), as a Photoshop action records a Free Transform; image.applyImage takes a source layer by name. - .atn events: transform (layer → translate or relative transform; selection → transformSelection), applyImageEvent, export (Save for Web, with the txtu path record decoded and written back; kept verbatim without a destination), newPlacedLayer / placedLayerEditContents / updatePlacedLayer, close with the Save answer → save + close, delete of the target channel → layer mask delete, Quick Mask on/off, polygon selections → select.lasso, Gradient Map (direct and as an adjustment layer). 92 → 105 events. - Export tries every event listing a command id (Quick Mask on → set, off → clearEvent). - Docs: event counts in the parity docs.	2026-10-12 19:02:15 -04:00
Fabio Lissi	3204231d7d	Load and save Photoshop Actions (.atn) (#4356, #219) (#4434) ... * Load and save Photoshop Actions (.atn) (#219) - photocraft-psd: `atn` parser and writer for version-16 action sets, exact round trip, truncation/garbage safe, fuzz target and `atn_dump` example. Descriptor fix: `indx` and `Idnt` reference items carry a class before the number (real action files failed to parse). - photocraft-engine: `atn_cmds` maps 92 Photoshop events to commands and back (filters, adjustments per channel, image/canvas/crop/trim/rotate/flip/mode, make/set/select/delete/ hide/show/move/duplicate, fill/stroke, selection, clipboard, purge, profiles, play, stop). Other steps load as `actions.photoshopStep` (descriptor kept, written back by save, fails at playback by name); tool selections load switched off. Commands `actions.load`, `actions.save`, `actions.stopMessage`, `actions.photoshopStep`. `Action` gains `dialogs` and `set`. `layer` params accept a layer name, so loaded steps replay in any document. - UI: Actions panel menu › Load Actions… / Save Actions…; Photoshop steps labelled. - CLI: `batch --actions set.atn`. Automation policy covers the new path params. - Docs: file-format parity (.atn R/W), gaps G11, target-app parity, scorecard AUTO-219-2 partial, development guide. * Translate the Actions panel's Load/Save strings in every catalog The eight new panel strings (Load/Save Actions…, the loaded/saved counts, the kept-step label) were missing from all 19 catalogs; the languages that were complete are back at 100%. * Show the Actions entries in the default dock's panel menu The legacy dock renders its own group menu and only knew the Layers and Swatches entries, so Load Actions… and Save Actions… were missing there.	2026-10-12 18:39:57 -04:00
3 people	aa4d4859b4	fix(io): preserve indexed BMP color tables (#3802) (#3869) ... Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-12 09:13:38 -04:00
Brandon ThomasandClaude Opus 5.5	62346f7fb6	feat(save): File › Save keeps a JPEG's quality and a WebP's lossy/lossless encoding (#2399) (#4032) ... Opening a JPEG now estimates the quality it was saved at from its quantisation tables (the Annex K tables of ITU-T T.81 scaled by the IJG quality curve; exact for such tables, the closest fit otherwise). Opening a WebP records whether it is lossless (VP8L) or lossy (VP8), and a lossy one's quality from its base quantiser index. The settings live on the document (`Document::file_encoding`, saved in .pcraft) and a save that asks for no quality writes the file back the same way, as Photoshop's Save does: File › Save, Save As and Save a Copy start there instead of the fixed codec defaults (quality 90, WebP always lossless). An explicit quality still wins; new documents and other formats keep the defaults. Hostile or truncated DQT/VP8 headers give no estimate, never a panic. Refs #2399 Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-12 05:45:50 -04:00
3 people	f14817a5d2	Animated GIF: every frame loads into video layers (#572) (#2999) ... * feat(codecs): decode every frame of an animated GIF (#572) decode_gif_frames returns each frame composited onto the logical screen (disposal methods applied) with its delay in milliseconds. decode still keeps the first frame only. A damaged later frame keeps the frames before it and marks the first with DecodeWarning::Truncated; dimensions, the total decoded bytes and a frame cap are checked against the limits. * feat(io): import_gif_frames hands each GIF frame over as a document (#572) A frame at a time becomes a single-layer document, so a caller can flatten and drop it instead of holding every frame twice. * feat(engine): animated GIFs load every frame into video layers (#572) New Video Layer from File, Replace Footage, Reload Frame and Video Frames to Layers take all frames of a GIF instead of the first. The timeline rate comes from the GIF's delays (the most common one, delays under 20 ms shown at 100 ms as browsers do); an explicit fps still wins. * docs: animated GIF frames in video layers (#572) --------- Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-12 01:26:37 -04:00
5 people	aa1febaffb	Keep fitted Camera Raw colour during tuning and crop Nikon D5100 borders (#3201) ... * raw: fit non-DNG colour to the camera's embedded JPEG * raw: preserve fitted Camera Raw look and crop D5100 borders --------- Co-authored-by: Gert Pellin <gert@pellin.be> Co-authored-by: optimalbytee <optimalbytee@users.noreply.github.com> Co-authored-by: Brandon Thomas <echelon@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-11 19:12:19 -04:00
3 people	a35af4e279	Add FITS read/write (astronomy images) (#2956) ... * Add FITS read/write codec FITS (the astronomy format) opens and saves as a flat image: the primary HDU or first IMAGE extension; gray, or RGB when NAXIS3 = 3; BITPIX 8/16/ 32/64/-32/-64 with BSCALE/BZERO/BLANK; rows follow ROWORDER (bottom-up by default). Camera U16 data stays exact; float data is normalised to 0..1. Header cards round-trip as text metadata (HIERARCH for long names). Tile-compressed (fpack) files are refused as unsupported. Wired into File > Open, Save As and the batch commands as .fits/.fit/.fts. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Test FITS open and save through photocraft-io Gray 16-bit, RGB 8-bit and RGB 32-bit float documents round-trip exactly, and header cards travel as the document's text metadata. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * FITS: hostile-header regression test (absurd axes, bad BITPIX, no END, HDU chains, overflowing sizes) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-11 13:15:22 -04:00
Brandon ThomasandClaude Opus 5.5	939c8f2c70	Progress docs: target-app parity, gaps, alpha gate, readiness by audience (#2696) ... Progress docs per craftrules standards/progress-docs.md: target-app parity (merges parity-estimate.md), gaps, roadmap with alpha gate, readiness by audience (full / mainstream / essentials) with Opus 5.5 hours, and UI, brush, format, hardware and localization parity docs. docs/parity.md is now docs/parity-checklist.md. The Windows test failure (file_dialog::tests::save_dialogs_remember_where_each_document_was_last_saved) is pre-existing on main: the test hard-codes POSIX paths. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-10 15:09:04 -04:00