Photoshop's 16-bit PSBs can mark the merged transparency only by naming it
"Transparency" in the alpha channel names (positive Lr16 layer count, no Mt16).
The importer read it as a user alpha channel, and the next save wrote a second
one. merged_has_alpha now also accepts that name when the layers sit in a
global Lr16/Lr32 block and the names cover every extra channel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Raw: measure the Nikon D90 image area (4288x2848 at (10, 10))
Aligning the decoded D90 sensor plane with the camera's own JPEG puts the
image at (10, 10) in the 4352x2868 sensor plane, giving the camera's
4288x2848 frame (10-pixel margins; the right border reads the camera's flat
255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the
camera's frame instead of the uncropped plane, and make a measured profile
leave a file that carries its own colour calibration (a DNG) untouched.
* Codecs: open Cineon (.cin) film frames read-only
Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from
the same Kodak header family: the generic header (big-endian, orientation at
192, channel count at 193, the channel-1 bits/dimensions), one or three
channels, three 10-bit samples packed into each 32-bit word on a word
boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the
file's log black/white points are a display choice and are not applied. A
depth other than 10 bits or a channel count other than 1/3 is Unsupported;
truncation errors rather than panicking. Read-only (no Cineon writer), so
.cin joins the open filters and Cineon read closes part of #1049's G10 gap.
* PSD: write tiff blocks without copies, inflate merged ZIP once
- ImageSourceData::to_bytes writes the global mask and global blocks
straight from the model with 4-byte alignment instead of cloning each
block (data included) to set its padding. Same bytes.
- The tiff transcoder's nested regions and blocks write into the parent's
buffer (taken and handed back, error or not) instead of building their
own output and copying it up per nesting level. Bodies that fail or are
not transcoded are truncated before being copied as stored or dropped.
Same bytes.
- PsdFile::from_bytes_and_merged decodes the merged image with the parse
when asked: a ZIP stream is inflated once (the decode's stream check is
the parse's); the parse-only check runs only when the decode fails, to
keep from_bytes' errors. PSD import uses it with merged_needed.
- PsdBuilder::composite documents that Gray/CMYK composites stay straight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keyboard shortcut sets: Set menu, New Set, Save, Delete, .kys Export and Summarize (K2)
Edit › Keyboard Shortcuts gets Photoshop's set management. A set is a saved copy of the
bindings (Preferences.shortcutSets, the one in use in shortcutSet; "" is PhotoCraft Defaults),
and the Set menu shows "(modified)" when the bindings differ from it. New Set…, Save and
Delete wait for OK like the rest of the dialog. Export… writes the dialog's bindings as a .kys
file (commands then tools, Photoshop's macOS key spelling), each row carrying our id as pc-id
so PhotoCraft imports its own sets back exactly, whatever the label; Summarize… writes
Photoshop's HTML list of every bound command by menu.
edit.keyboardShortcuts takes useSet (before the call's edits), saveSet, deleteSet, sets and
activeSet (after them), exportKys and summarize; every reply reports the sets, the set in use
and whether it is modified. Bad names, keys or counts are errors that change nothing.
* .kys import: tool keys and sets saved on Windows (K3)
Photoshop's <tool> rows now import: each matches our tool by name (our tool names are
Photoshop's) or by pc-id in sets PhotoCraft exported, and a letter other than the tool's own
becomes its override, while its own letter keeps the tool cycling with the others (#5036).
A set saved on Windows spells the primary modifier Ctrl where a Mac set writes Cmd and keeps
Control for the Control key. A set with no Cmd or Opt anywhere but some Ctrl is read as a
Windows set, its Ctrl as our Cmd: Ctrl+L is the Cmd+L default, not a Control-key override that
would also mean Control on a Mac. The import reports `windows`.
* cargo fmt the extension lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Vikram Bhaskaran <vikram.bhaskaran@outlook.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Tanish Manku <tmanku.dev@gmail.com>
The merged image carries its transparency in the first extra channel
when the layer count is stored negative, or when a "Saving Merged
Transparency" global block (Mtrn, Mt16, Mt32) is present. Photoshop
saves 32-bit documents the second way: a positive layer count, Mt32,
and a fourth channel named "Transparency" (psd-tools transparentbg).
merged_has_alpha only knew the first, so opening such a file added a
"Transparency" alpha channel to the document, and the oracle compared
it as if it were opaque white (83.7 % of pixels off; now 0.9 %, all on
the shape's edge).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(psd): prioritize 16-bit and 32-bit global layer blocks over compatibility section (#4928)
In 16-bit and 32-bit PSD files saved by Photoshop, the Layer Info section
either contains 0 layers or 8-bit compatibility layers, while the actual
16-bit/32-bit layers are stored in the global Lr16/Lr32 tagged blocks.
Previously, candidate_seen was initialized to layer_info.is_some(), which
caused PsdFile::from_bytes to skip the Lr16/Lr32 block whenever the section
was non-empty. This left the document with empty layer lists or 8-bit records
that failed channel decoding at depth 16/32, causing all layers to be empty
and invisible.
Prioritize the depth-specific tagged block (Lr16 for 16-bit, Lr32 for 32-bit)
over the compatibility section.
* test(psd): improve 16-bit multi-layer compatibility regression tests
validate_planes bounded its zlib loop by the uncapped declared size, so a
PSD/PSB declaring more than MAX_DECODED_BYTES of merged image could make
PsdFile::from_bytes decompress far past the decode budget before any
error. decode_planes refuses such a layout with LimitExceeded anyway, so
the stream is now kept verbatim without inflating it, like an unknown
compression method. A layered file whose merged composite is too large
still opens (the importer only warns when the composite can't be decoded).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(psd): Align global tagged blocks to four bytes
Use four-byte defaults for global blocks and streamed layer information.
Read global payloads without full copies while preserving block order,
explicit padding and the first layer candidate. Keep two-byte layer
alignment; test canonical padding and lossless PSD/PSB parsing.
* fix(psd): Preserve transparent composite colours and precision
* fix(psd): Check ZIP integrity and bound layer previews
* fix(io): Use document CMYK profiles for PSD fill pixels
Generated fill pixels used the default CMYK separation even when the PSD
embedded a different profile. Scope layer export to the document colour
space so cached pixels and the composite use the same profile.
Check native cached samples against an explicit ICC transform at 8 and
16 bits.
* io: refuse an empty RGB composite before splitting it into planes
chunks_exact(0) panics; an empty decoded composite now returns an error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A 16/32-bit file whose global Lr16/Lr32/Layr block failed to parse opened
as a single Background layer from the merged image with no warning: the
parse error was discarded in PsdFile::from_bytes. The raw block stayed in
the preserved global blocks, so a PSD save wrote the document's fresh Lr16
plus the unreadable original: two layer lists in one file.
- psd: PsdFile::unreadable_layer_block() reports the kept block and its
parse error.
- io import: a warning names the block and the error and says only the
merged image was opened.
- io export: a preserved Lr16/Lr32/Layr block is not re-emitted when the
document's own layers are written.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Saving a 16- or 32-bit PSD built the Lr16/Lr32 layer payload in a temporary buffer and cloned
every global tagged block before copying them into the file. The payload is now written
straight into the output with its length patched afterwards, and the neighbouring blocks are
borrowed. Output is byte-identical: all 735 corpus PSD/PSBs re-save to the same bytes. A 24 MP
layer saves in 66 ms instead of 75 ms at 16-bit and 132 ms instead of 164 ms at 32-bit, and the
temporary 144-288 MB copy is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
CI's `cargo fmt --all -- --check` has failed on every run because the
repo had no rustfmt config and was never formatted. Use the same settings
as EffectCraft/FilmCraft (max_width 160, use_small_heuristics Max), which
also keeps the churn small. Formatting only; no code changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
