* Automation: --root refuses every outside path the same way (#136)
With a root set, `resolve` canonicalized a path before checking it against
the root, so an existing outside path got "is outside the allowed
directory" while a missing one got the OS error ("No such file or
directory", "Not a directory", "invalid path"): a confined MCP client or
script could probe which files and folders exist anywhere on the disk.
Containment is now decided before anything about an outside path is
reported:
- `..` is resolved by name first (as Windows does), so a path can't pass
through an outside folder on its way back in;
- on Windows another network share or device namespace (`\\host\share`,
`\\?\UNC\...`, `\\.\...`) is refused by name, without contacting it;
- the deepest existing ancestor, links followed, must be inside the root
before anything is said about the rest;
- a broken link is refused the same way, so whether its target exists
stays hidden too.
Every outside path now gets `<path> is outside the allowed directory
<root>`, existing or not, file or folder, read or write. Filesystem errors
such as "not found" are still reported for paths inside the root.
Behaviour change: on Unix, `..` now means the parent by name, as on
Windows (`link/../x` is `x` beside `link`), and a write such as
`new/../x.pdf` that stays in the root now succeeds instead of failing with
"'..' is not allowed here".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: script images stay inside --root (#137)
`pdfcraft-cli run --script steps.json --root DIR` wrote each step's
`"out"` PNG with `std::fs::write`, never through the root check the tools
use: an absolute `"out"` created or replaced any file the process could
write, and a relative one landed in the working directory instead of the
root.
The image is now saved through the new `Automation::write_output`, which
uses the same resolver and atomic write as a tool's own output: outside
paths get the usual "is outside the allowed directory" refusal (the step
fails, nothing is written), relative paths resolve inside the root, and
without --root the path is written as given, in place as before (so
`/dev/stdout` still works). `run <tool> --out` goes the same way.
Found while testing this, the same "." problem in two tools:
- a write path naming a folder, such as "." (the root itself), staged its
temporary file beside that folder, i.e. outside the root for ".",
overwriting and then deleting any file there called
`.root.pdfcraft-tmp`. `write_atomic` now refuses a folder before
writing anything;
- `image_save` adds an extension to a path without one, so "." became
`root.png` beside the root. It now refuses a folder first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Automation: files named after a document stay in the output folder
Found while reviewing the --root fixes for #136 and #137. Folder outputs
name their files after the document and joined that name straight onto the
resolved folder, without checking the result against the root:
- `doc_export_images` and `doc_export_all_images` used the whole document
name, so `doc_create` with `name: "../../escape"` followed by
`doc_export_images` wrote `escape_page_1.png` outside the root (an
absolute name went anywhere);
- `page_extract` (separate files), `doc_split`, `ocr_recognize_files` and
`action_run` took the last component, but on Windows a name such as
`x/C:evil.pdf` gives `C:evil`, and `folder.join("C:evil-page1.pdf")`
replaces the folder with a path relative to the current directory on C:.
Every such name now goes through `child()`, which turns separators,
colons and control characters into `_` (and prefixes a name of only dots),
so the file is always a direct child of the folder. `with_root` also
refuses a root that is not a folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The app, crates, binaries, bundle id, packaging, icons, screenshots and docs are now
PdfCraft / pdfcraft (repo storytold/pdfcraft). On first launch the desktop app moves the
PrintCraft settings and crash-recovery folders to the new name, and both apps read settings
saved under the old storage key, so upgrades keep recent files, preferences and unsaved work.
The signing test fixtures keep their PrintCraft subject names (they are binary).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Finder hands files to an app as an Apple event, not on the command
line. winit doesn't handle it, so AppKit answered "PrintCraft cannot
open files in the PDF document format". The bundle also declared no PDF
document type: its Info.plist still carried the sibling image editor's
types.
- Info.plist declares PDF (by extension and MIME type) as a document
type, role Editor, rank Alternate: offered under Open With and
settable as the default, without taking over on install.
- apps/printcraft registers open-documents and quit Apple event
handlers through fmv-macos-events (=0.1.0, the audited safe wrapper
PhotoCraft uses, since the Objective-C interop needs unsafe), before
the launch event arrives.
- printcraft-ui-egui gains OsEvent and PrintCraftApp::os_events, polled
every frame: Open opens each file as File > Open does; Quit closes the
window like its close button, so unsaved changes are asked about.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
XFA forms aren't read yet, and opening one gave no hint: a dynamic XFA form
showed only its "Please wait…" placeholder page, and a static one looked like
an ordinary form though Acrobat shows its XFA data in preference to the
fields that get filled.
- render: DocInfo.xfa (Static / Dynamic) from /AcroForm /XFA; dynamic when
/NeedsRendering is true or there are no fields. Exported for doc_info
(automation and CLI) as "xfa".
- ui: the notice bar explains each case (above the form-fields notice); a
static form keeps its Highlight fields button.
- Tests: tests/xfa.rs (dynamic with and without /NeedsRendering, static,
ordinary forms, a malformed /XFA). Parity notes for form.xfa-static and
form.xfa-dynamic (still planned: this explains XFA, it doesn't support it).
Reported by @Sudachi-dev.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- printcraft.exe release builds use the GUI subsystem, so launching it no
longer opens a console window next to it (debug builds keep the console).
- The MSI's Icon id gains its .ico extension: Windows Installer requires it
for advertised shortcuts and ARPPRODUCTICON, so the Start Menu shortcut and
Add/Remove Programs showed a blank icon.
- Guards: package.ps1 checks the PE subsystem of both binaries (app = GUI,
CLI = console) before packaging; packaging-lint fails on an Icon id without
.ico/.exe.
- The shortcut's description said "image editor"; it's a PDF workbench.
Reported, with the exact fixes, by @MikailuReeves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
wgpu's default backends on Windows include Vulkan, and creating a Vulkan
instance loads every installed Vulkan driver into the process. On the
reporter's machine Intel's (igvk64.dll) crashed PrintCraft with an access
violation before its window appeared; WGPU_BACKEND=dx12 or gl started it
normally. PrintCraft now asks for D3D12 with OpenGL as the fallback, unless
WGPU_BACKEND says otherwise. The issue #8 low-power preference is kept in
the same configure_gpu, and a unit test (run by the Windows CI job) checks
Vulkan is left out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PrintCraft asks GitHub for the latest release and, when it is newer, offers
its release page to download from. Nothing is downloaded or installed
automatically (installing in place needs signed release artifacts).
- ui-egui: updates module (version comparison, background check, dialog);
no network code: the desktop app supplies the source, and without one
(web build, tests) the command opens the releases page.
- desktop: one HTTPS request (ureq over rustls with the OS's trusted roots,
10 s timeout, 1 MiB cap). Only a page under the releases list is offered.
No bundled root list: webpki-roots/webpki-root-certs are CDLA-licensed.
- The check at start is opt-in and silent unless there is a newer version.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- On hybrid-graphics laptops wgpu picked the discrete GPU (egui-wgpu defaults
to HighPerformance). NVIDIA's can lose or corrupt its memory across suspend
and screen lock, which matches the illegible window in #8. PrintCraft now
asks for the low-power adapter unless WGPU_POWER_PREF is set; one-GPU
machines are unaffected, and it saves battery.
- "Save changes?" had no keyboard: Enter saves, Escape cancels, and Don't save
takes Cmd/Ctrl+D (macOS) or Alt+D / Alt+N (the mnemonics the reporter tried).
Its keys are read before the canvas (which took Escape), and no other
shortcut runs underneath it (Cmd+D opened Document properties).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each "checked" `expect` becomes `let … else`, `if let` or `?`, with the obvious fallback (the
dialog closes, the command is ignored, the view refresh is skipped). ui-egui and the three apps
now deny the panic lints. The Windows `build.rs` reports a failed resource step with
`cargo::error` instead of panicking.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`printcraft_engine::guard` wraps `catch_unwind` and returns an error message.
- `Session::apply`: edits run on a copy of the document, so a panic leaves it unchanged and is
reported as an error. A panic while refreshing rolls the edit back.
- `Session::open`, `save_bytes`, `save_full_bytes` and `export_data` report a panic as an
open, write or export error.
- `PrintCraftApp::execute`: a command that panics shows a notice, and the app and its documents
keep running.
- The desktop app installs a panic hook that logs every panic to stderr, with a backtrace when
`RUST_BACKTRACE` is set.
Autosave and crash recovery (`RecoveryStore`) were already in place for anything that escapes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
