* M10: enhance camera images: straighten a page from four corners (ocr.camera-perspective)
Four corners on a page (any order, a convex quadrilateral) are warped to an
upright rectangle that replaces what the page shows, read at the page
picture's own resolution (at most 600 dpi) and kept at that physical size.
One undoable step through Replace Pages, so comments, links and bookmarks
stay.
- geom: a pure 3x3 homography solve and corner ordering (no dependencies);
collinear, concave and non-finite input gives None.
- engine: camera::warp (bilinear, over white, capped at 40 MP) and
Session::enhance_camera_page.
- automation: page_enhance_camera (corners in top-left-origin points).
- parity: ocr.camera-perspective is partial; the UI handles, automatic edge
detection and contrast cleanup are still missing.
Refs #1008.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: Enhance camera image: drag four corners on the page, then Enhance page (ocr.camera-perspective)
Scan & OCR ▸ Enhance camera image (ocr.enhance_camera) shows four corner
handles on the current page, inset 5% from its edges, with what will be cut
away dimmed. Enhance page straightens what they enclose through
Session::enhance_camera_page (one undoable step); Cancel and Esc leave the
page alone. The buttons float at the top right, clear of a centred page's
corners, and the instructions are a notice, as for Crop.
A command of its own, beside Enhance scanned file (ocr.enhance), which
stays for scan correction (#1012).
- ui-egui: camera_ui (handles, dimming, bar), QuickTool::EnhanceCamera,
quick_tool "enhance-camera" for ui.state and the shot example.
- Catalogs: the three new labels in every language with UI coverage
(plus es, pl, zh-hant); ATTRIBUTION.toml hashes updated.
- automation: page_enhance_camera is linked to the command.
- parity: ocr.camera-perspective lists the command and the UI test.
Refs #1008.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: Enhance camera image finds the document's edges (ocr.camera-perspective)
The corners now start on the photographed document's edges when they can
be found, else inset 5% as before.
camera_edges::detect_document, pure Rust and deterministic: shrink to 400
px, blur, Sobel edges thinned and thresholded against the 98th percentile;
a Hough transform where each edge votes within 6 degrees of its own
normal; pairs of near-horizontal and near-vertical lines make convex
quadrilaterals (at least 12% of the picture), kept when every side lies on
a matching edge along at least 55% of its length and scored by area times
the square of the mean support; each side is then refitted through its
edge points (total least squares). None when nothing convinces.
- Session::detect_camera_corners (user space); page_enhance_camera finds
the corners itself when `corners` is omitted and reports the corners it
used and whether they were detected; the UI command starts from them.
- Tests on synthetic photos: plain table, text on the sheet, wood grain
with a shadow, strong perspective, a 30 degree turn, a sheet running off
the picture, no document, white on white, bad input; end to end through
the engine and the tool.
- Parity notes: what is still missing (turning the result upright, rounded
corners, clean-up).
Refs #1008.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: after Enhance page, rotate, crop or organize the page (ocr.camera-perspective)
Enhance camera image no longer closes on Enhance page: the bar then offers
rotate counterclockwise and clockwise for the enhanced page (one undo step
each), Crop pages and Organize pages (which leave the tool for those
tools), and Done; Esc leaves too. A photo of a card often comes out a
quarter turn off until the page is turned upright automatically.
The two icon buttons are named for screen readers. Every label already
exists in the catalogs.
Refs #1008.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: magdale76 <16279778+magdale76@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M10.2: create PDF from multiple files
Create a PDF ▸ Multiple files takes PDFs, images and .txt files, lets the
user reorder them, and makes one combined PDF (a bookmark and an optional
page range per file) or one PDF per file in a chosen folder, never
overwriting what is there.
- create: source_kind() tells PDFs, images and text apart (moved from the shell)
- engine: Session::convert_to_pdf, shared by Open, the dialog and the tool
- automation: doc_create_multiple (combine or separate)
- ui: Multiple files dialog reusing the Combine files list; translations
- parity entry and ROADMAP updated; catalog hashes refreshed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10.2: multiple files open in the page grid; insert files at any gap
Create a PDF ▸ Multiple files now opens the picked files as one unsaved
document in the Organize page grid instead of a file-list dialog: pages
are removed and reordered there, and Save pages writes what is shown.
- grid: a "+" at every gap inserts files right there; Save pages button
- insert from file: several files in order, images and text converted,
inserted pages selected
- the file-list dialog is removed; one PDF per file stays in the
doc_create_multiple tool
- translations, catalog hashes, parity notes and ROADMAP updated
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M4: insert files by dropping them on the page grid
On desktop, PDFs, images and .txt files dropped on the Organize page grid
are inserted at the gap under the pointer, in order, and selected; a
dropped file still opens as a document everywhere else.
winit does not report the pointer while files are dragged over the
window on every platform, so a drop waits (up to a second) for the
pointer to show up and otherwise appends at the end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M4: files dragged over the page grid follow the pointer (macOS)
winit sends no pointer moves while files are dragged over the window, so
egui kept the place the pointer entered at: the insertion bar froze there
and the files were inserted there. During a file drag the pointer is now
read from AppKit (safe objc2 calls, crates already in the tree) and fed
to egui, so the bar and a "+" badge follow the pointer and the files go
where they are released.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M12: add calibrated 2D measurement tools
* M12: harden measurement tools for landing (#208)
Bounded snap targets (endpoints only for accepted segments, page-wide cap),
lenient extraction (deep q nesting and undecodable streams are skipped and
reported), per-page snap cache, measure::list reports unsupported entries
instead of failing, closed polygons with a repeated vertex, printable unit
labels (m²), cached panel listing, WinAnsi captions, indirect /VP kept,
measure.export skipped in the command test like other pickers, missing
translations, honest parity (scale and distance partial) and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* #163: allow replacing saved signatures and render long names fully
Add saved signature and initials previews with change/remove/add controls in
Fill & Sign. Preserve placed annotations and saved values on cancellation.
Use bounded line outlines for long names and fit typed placements to 150 pt.
Co-authored-by: Codex <noreply@openai.com>
* cargo fmt after the rename
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Codex <noreply@openai.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The app, crates, binaries, bundle id, packaging, icons, screenshots and docs are now
PdfCraft / pdfcraft (repo storytold/pdfcraft). On first launch the desktop app moves the
PrintCraft settings and crash-recovery folders to the new name, and both apps read settings
saved under the old storage key, so upgrades keep recent files, preferences and unsaved work.
The signing test fixtures keep their PrintCraft subject names (they are binary).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- #93: field detection already ran when Prepare a form starts on a
document without fields, and as the form.detect command, but nothing in
the tool panel offered it. Prepare a form > Fields now lists Detect
form fields; on a form that already has fields it only adds new ones.
- #95: with several fields selected (Shift/Cmd-click), Delete and the
context menu's Delete removed only the right-clicked one. They now
remove every selected field as one undoable step ("Delete 3 fields").
One prepare::delete_selected serves both.
Editing the shared properties of several fields at once is still to do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The engine and agent tool already made squiggly underlines; the UI had no
way to. CommentTool::Squiggly joins Underline and Strikethrough in the
Highlight flyout and the Comment tool's Markup section, as the
comment.squiggly command, and existing squiggly comments edit as themselves.
Test: comments.rs::the_squiggly_tool_marks_selected_text. Parity
comment.squiggly: shipped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
