ROADMAP.md: kept both progress lines.
crates/optimize/README.md: PR's decoder sentence plus the target-version section from main.
Cargo.lock: auto-merged.
Conflicts: docs/roadmap.md: all status lines kept, M10 row from main, M11 row with #3227's two sentences. parity/acrobat-features.toml: save-with-object-streams entry from #3227 with its test paths under tests/it/.
ROADMAP.md, docs/roadmap.md: kept both sides' status and progress-log lines; did not restore the older M14 status line that the branch had already trimmed.
Conflicts: ROADMAP.md, docs/roadmap.md: both sides' status, progress and change-log lines; M10 row has the soft-mask sentence added to ours, M11 row from the earlier merge.
Conflicts: ROADMAP.md, docs/roadmap.md: both sides' status, progress and change-log lines; M10 row has both sentences. parity/acrobat-features.toml: export.docx evidence has both tests, notes has both statements.
Conflicts:
- parity/acrobat-features.toml: comment.note: kept main's icon notes text, added the NoRotate sentence and the PR's three evidence entries.
- vendor/README.md: kept main's rows; added the PR's hayro-interpret patch as (53) with its test (53).
Conflicts: ROADMAP.md and docs/roadmap.md took both sides' status lines, progress-log and change-log rows; M10 table row from #4311, M11 row from #4310.
A file opened again shows the page, zoom and page display it was last
shown with, as Acrobat's "Restore last view settings when reopening
documents" does: remembered by path (the last 100 files) when its tab
closes or settings are saved with it open, applied over the file's own
initial view, on by default and switched off in Preferences ▸ Documents
and view.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Review: copying an added JPEG 2000 image failed even within its own
document, because the exporter can't write JPEG 2000 yet. Add Image stores
such a picture as the file it was given, so that file is the copy: it
pastes into the same document as the same object and into another as one
embedded image. The notes now also say that a CMYK picture stored
losslessly turns to RGB in another document.
Co-Authored-By: Opus 5.5 medium ultracode <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017gEgu9NcTcPqKovsLyfPxK
Edit::PasteContent pastes an added text box or image copied in the same
document or another, as it was (a text box's style; an image's picture,
turns, flips and crop), as one undo step. A pasted image draws its picture
from the copied object while that is still the picture in the target, else
from an added image there that already holds it (an earlier paste from
another document), else the file is embedded. Document::added_image_file
gives a copied image's picture as a file and honours the copy permission.
pdfcraft_edit::added::paste_rect / paste_place place a paste where the item
was, 18 pt down and to the right past each copy of it on the page (an image
with the same box and transforms counts whichever object holds its
picture), or at a point, kept on the page.
The content_copy tool drives it headlessly, across pages and documents.
The desktop keys and menus come in follow-up PRs.
Co-Authored-By: Opus 5.5 medium ultracode <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017gEgu9NcTcPqKovsLyfPxK
Edit text set a paragraph whose font lacks a typed character (an accent
missing from a subset) in a standard font, always under the resource
name PCEdHelv, whatever face it stood for. Rewriting a bold paragraph
after a regular one replaced PCEdHelv with Times-Bold, so every
paragraph set in the earlier stand-in turned bold, and the editor's
draft measurement saw those paragraphs change and grew its frame over
them.
The stand-in is now named after its face (PCEdTimesBold, ...), as the
line and region rewrites already name theirs.
Fixes#4280
* M6: calculations read their notation only from a comment, and a regex after a condition as a regex
Two findings from CodeRabbit's review of #3550, both reproduced first:
- parse_calculate and calculation_sites found BVCALC and EVCALC anywhere
in the script, so `var s = "BVCALC a EVCALC";` read as the notation `a`:
renaming `a` rewrote the string, and the form calculated `a` instead of
running the script. The lexer now keeps the text of each comment, and
the notation is read from the first comment that holds BVCALC and the
EVCALC after it (notation_range), by both the Calculate tab and a
rename. A line comment counts, and a comment that never ends runs to
the end of the script, as before.
- A `/` after any `)` divided, so after the condition of `if`, `while`,
`for` or `with` a regular expression was read as code: renaming `a`
rewrote `if (flag) /getField("a")/.test(x)`, and in
`if (flag) /"/.test(x)` the quote started a string that hid the
script's real getField calls. The lexer now notes which `(` opened
such a condition (not a method of that name, `o.if(x)`), and a `/`
after its `)` starts a regular expression.
af::tests::notation_is_read_only_from_a_comment,
af::tests::a_regex_after_a_condition_is_not_read_as_code and
tests::a_script_that_spells_the_markers_in_a_string_runs_as_a_script
fail without the fix. Parity, ROADMAP.md and docs/roadmap.md updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: form.props-calculate notes that a regex right after a brace is still read as code
From CodeRabbit's review of this PR. The lexer still divides after `}`,
which ends a block as often as an object literal, so in
`if (x) { } /"/.test(s); event.value = getField("a").value;` the quote
starts a string and the getField is hidden from a rename and from the
calculation order. Checked with a scratch test before writing it down.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: a line comment ends at any line terminator, so code after `\r` is still read
From CodeRabbit's review of this PR. A `//` comment ran to the next `\n`,
so with `\r` line endings it hid the rest of the script: a rename missed
the getField calls after it (since #3550), and a string after it that
spells BVCALC ... EVCALC read as the notation. A `/` taken for the start
of a regular expression likewise looked past `\r` for its end, and could
swallow the next line's code.
Both now stop at any of JavaScript's line terminators (`\n`, `\r`,
U+2028, U+2029; line_ends_at), and U+2028 and U+2029 between tokens are
skipped rather than read as the start of a word.
af::tests::a_line_comment_ends_at_any_line_terminator fails without each
of the three changes: with `\r`, the string read as notation `a`; with
the comment fixed but not the regex scan, `i++ / 2;\r` swallowed the
getField after it; without skipping U+2028, the getField after it was
not a call.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: a word, number or regex's flags end at U+2028 and U+2029
From CodeRabbit's review of this PR. The scans for an identifier, a
number and a regular expression's flags took every byte past ASCII as
part of a word, U+2028 and U+2029 included, so in `x\u{2028}getField("a")`
the getField was part of one word and not a call: a rename missed it, and
the calculation order didn't read it.
`word` now takes a position and is false where line_ends_at is true, so
the three scans share one rule. The arm that skips U+2028 and U+2029
between tokens stays: without it, the punctuation arm would step one byte
into the character.
af::tests::a_token_ends_at_a_line_separator fails without the fix, for a
word, a number and a regex's flags alike; it and
a_line_comment_ends_at_any_line_terminator fail without the skipping arm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: the `while` that ends a `do` loop counts as a condition, said and tested
A `/` after the `)` of a do-while starts the next statement, so it starts a
regular expression there too. The comment on BEFORE_CONDITION says so, and
a_regex_after_a_condition_is_not_read_as_code covers it (from review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A CUPS job that names no paper gets the queue's PPD default (A4 on the
reporter's Xerox queue), whatever the sheets were laid out on. Two gaps
remained after #1583:
- cups_media had no name for 13 of the 21 PAPERS sizes (A6, ARCH A-E1,
ANSI C-E, A0-A2), so the Print dialog sent no media for them. They now
use PWG 5101.1 names (the IANA-registered na_arch-e1_30x42in for ARCH
E1), which carry their dimensions: CUPS feeds the driver's size of those
dimensions whatever the driver calls it, and driverless IPP printers use
them natively. Checked with cupsfilter against a synthetic PPD whose
sizes use vendor keywords (ARCHD, AnsiD, A0...): each name produced its
size's bounding box. The 8 sizes that already worked keep their PPD
keywords.
- doc_print to a printer (CLI run, MCP) sent no paper at all. It now
resolves the paper to its PAPERS index and sends the same media option
as the dialog, after the driver options. The job is built in spool_job
so it can be tested without printing.
print::media_option is the one place both get the option from. Both new
tests were seen failing without the fix. The macOS tray half of #3752
(Auto Select instead of the PPD's default tray) is a craft-print change.
With a comment selected, the arrow keys scrolled the view (↑ ↓) or turned the page (← →), so
a text box, rectangle or line could only be placed with the mouse. Now an arrow key moves the
selected comment a screen pixel, and ⌘/Ctrl or Shift and an arrow ten, as Edit text nudges
objects; up is up on screen whatever the zoom, the page's rotation and the view's. Each press
is one undo step (Edit::MoveAnnotation). The keys are taken before the view's navigation,
which has them back once nothing is selected. Text markup stays with its text, and a locked
comment where it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The theme preference defaults to System: dark on a dark desktop, light
where the desktop says nothing. Saved settings and --theme still win.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The track merges used a union driver for these files, which kept two
versions of a milestone row or status line wherever two tracks changed the
same one. They are recomputed as base plus each track's changes, with two
edits of one line combined into one line. The status lines that #2805, #3808
and #3532 put above the Stage line join the status list below it, newest
first.
aiongg