Conflicts:
- ATTRIBUTION.toml: ours (sha256 lines only); hashes recomputed at the end of the track
- crates/engine/Cargo.toml: main's workspace chrono entry, plus the PR's pdfcraft-testkit dev-dependency
* Use chrono for UTC/calendar conversion instead of hand-rolled copies
Replaces the hand-rolled civil_from_days/days_from_civil copies and the
leap-year/month math around them (log timestamp, PDF /Info dates, ASN.1
UTCTime/GeneralizedTime, FormCalc Date/Num2Date, the Combine modified-time
stamp, the form date picker, and the demo-PDF timestamps) with chrono as a
workspace dependency. The engine's existing chrono (clock) is lifted to the
workspace. Every output format is unchanged and pinned by tests. CLAUDE.md now
says time goes through chrono.
Follow-up to storytold/cadcraft#1785
* Guard chrono date paths: no panic on overflow, no '+' on 5-digit years
Systemic chrono follow-ups to the UTC/calendar PR:
- logging::timestamp and combine_ui::utc_stamp dropped chrono's
From<SystemTime> (which unwraps internally and panics on a clock past
year 262143) for the fallible DateTime::from_timestamp, reading an
out-of-range clock as the epoch, as the old clamping code did.
- timestamp, utc_stamp, pdf_date and the xtask Stamp now write the year
with {:04} instead of %Y, which prefixes a '+' before years past 9999;
the old hand-rolled code wrote the plain zero-padded year.
- forms_ui calendar navigation and length, and formcalc days_in, use
checked_add for the December year successor so y + 1 can't overflow at
i32::MAX / i64::MAX (reachable from a parsed or persisted date).
Docstrings added to the chrono-touched civil_from_days and Time::from_unix
for the docstring-coverage gate. Tests cover the out-of-range-epoch and
10000-01-01 cases for each.
* Don't build an unrepresentable SystemTime in the far-future test
UNIX_EPOCH + Duration::from_secs(u64::MAX / 2) overflows Windows'
SystemTime and panicked before timestamp() ran, failing the Windows
test job. Build it with checked_add and only assert where it exists.
* Keep FormCalc dates exact past chrono's range
MAX_DAYS accepts day numbers up to 1e8 (years past 270000), but NaiveDate
stops near ±262143, so Num2Date(99000000) and Format fell back to
1900-01-01. days_from_civil, civil_from_days and days_in now have chrono
convert within the date's 400-year Gregorian cycle and add whole cycles
back (via i128), which gives the pre-chrono results for every year. Tests
cover accepted inputs past chrono's range on both sides of the epoch,
through Num2Date and Format, with values from the old formula.
* Bump rustls-webpki and webpki-root-certs for RUSTSEC-2026-0382/0383
rustls-webpki 0.103.15 -> 0.103.16 and webpki-root-certs 1.0.9 -> 1.0.10
(both semver-compatible, lockfile only) drop the distrusted emSign
intermediates and root. Only these two entries change; cargo deny check
advisories passes. Upstream main fails the same check.
* logging/cos/sign/combine/demo: keep extended-year dates, no epoch fallback
For consistency with the stricter no-epoch-fallback rule now agreed across the sibling
chrono PRs (wordcraft#3427, filmcraft#2662): `DateTime::from_timestamp(..).unwrap_or_default()`
changes a timestamp the old code converted past chrono's year 262143 range — it collapses
to 1970-01-01 instead of the real proleptic-Gregorian date. The FormCalc Num2Date path was
already fixed (FredApps approved); this applies the same fix to every remaining conversion.
Each site uses the 400-year Gregorian cycle (146_097 days) with chrono as the only calendar
logic: chrono converts the day within one cycle, whole cycles carry in the year (i128,
saturated into i64). PDF/ASN.1 format-specific year handling is kept exactly as the old code
had it. Verified the cycle result equals the old formula across a wide range and at the extremes.
- apps/pdfcraft/src/logging.rs `timestamp`: cycle `civil_from_days(u64)`; pre-1970 epoch clamp
and ms/time-of-day format kept. Pins: +10_000_000_000_000 s -> 318857-05-20T17:46:40.000Z
(was 1970); checked_add u64::MAX/2 s -> 292277026596-12-04T15:30:07.000Z (was epoch).
- crates/cos/src/writer.rs `pdf_date` (i64): cycle converter, no year clamp (old code wrote `y`
as-is, so a negative year keeps its sign). Pins: pdf_date(10_000_000_000_000)="D:3188570520174640Z",
pdf_date(-10_000_000_000_000)="D:-3149180813061320Z".
- crates/sign/src/der.rs `Time::from_unix` (i64): cycle converter; the `year` field is a u32, so
the year is cast `as u32` (wrapping) exactly as the old code did — ASN.1 year width preserved
byte-for-byte. Pins: from_unix(10e12).year=318857, from_unix(-10e12).year=4_294_652_378,
from_unix(i64::MAX).year=219_250_468, from_unix(i64::MIN).year=4_075_720_767.
- crates/ui-egui/src/combine_ui.rs `utc_stamp` (u64): cycle converter; pre-1970 epoch clamp kept.
Pins: utc_stamp(10e12)="318857-05-20 17:46 UTC", u64::MAX/2 s="292277026596-12-04 15:30 UTC".
- xtask/src/demo_pdf/pdf.rs `Stamp::from_unix` (i64): cycle converter, no year clamp. Pins:
from_unix(10e12).iso="318857-05-20T17:46:40Z"/.pdf="D:3188570520174640Z",
from_unix(-10e12).iso="-314918-08-13T06:13:20Z".
cos/sign/xtask built, tested (pdf_dates_are_utc_and_byte_identical, der::tests::times,
stamps_round_trip), fmt and clippy clean. pdfcraft-ui-egui and the pdfcraft app can't link
here (unrelated LLVM intrinsic bug in the rten-gemm dependency, 1.98.1), so their logging and
combine_ui functions + tests were copied verbatim into a scratch crate with chrono 0.4.45 and
pass there; fmt --check clean on all five packages. CI builds these on all platforms.
* Don't build a year-318857 SystemTime unchecked in the logging test
Windows' SystemTime only reaches about year 30828, so
UNIX_EPOCH + Duration::from_secs(10_000_000_000_000) panicked before
timestamp() ran and failed the Windows test job. Build it with
checked_add and assert where the platform can hold it. The year-10000
case fits everywhere and stays unconditional.
* Name the 400-year range extension as the one exception to the time rule
The rule said never to hand-roll calendar math, but the range fix
(shifting by whole 400-year Gregorian cycles so dates past chrono's year
range keep their old output) is cycle arithmetic, so the rule and the code
disagreed. The rule now names that exception: the library still computes
month, day and time, and only whole cycles are carried in the year.
* Say the library computes month and day; time-of-day is plain arithmetic
Narrows the range-extension wording: the date library computes the
calendar fields, and splitting seconds into hours, minutes and seconds
is ordinary arithmetic, which is what the code does.
* M10: exported TIFF and JPEG pages record the resolution they were drawn at
A page exported as TIFF said 1 x 1 with no unit, whatever the dpi, and
a JPEG export said nothing, so other programs showed and printed them at
a default (a 300-dpi page shown at 72 dpi is four times too big).
encode_image now takes the dpi: TIFF X/YResolution in inches, the JFIF
density in dots per inch.
PNG stays without pHYs. It counts pixels per metre, so 72 dpi would read
back as 72.009, and a page made from an exported PNG (doc_create from
images, as enhance_camera_image_through_tools does) would come out 0.01%
small.
Exporter records the resolution a page was actually drawn at (dpi_used),
so a page too large for the renderer says the lower one. render records
--dpi, since it refuses oversized pages. The TIFF is written with the
tiff crate, already in the graph, because image's TiffEncoder can't set
a resolution.
* M10: TIFF page exports are LZW-compressed, as documented
encode_tiff's comment said "LZW-compressed by the encoder's default",
but the TIFF was written uncompressed: a Letter page at 300 dpi came to
25 MB. It is now LZW without a predictor, the compression TIFF readers
support most widely after none.
* Contributors: add my name for the About window
Layer options in the Layers panel header resets every layer to the state the
file's default configuration (/OCProperties /D) gives it, as Acrobat does.
Visibility is view state, so the reset doesn't mark the document changed and
doesn't enter Undo. doc_info now reports each layer's initial state.
GoToR file specifications go through craft-docpath: network, device and
object-manager paths (\??\, /??/) are refused without touching the
filesystem, relative targets resolve against the source document's
folder, and a result that is not absolute is refused rather than read
against the working directory. Files named on the command line open
under their absolute path, so their relative links keep resolving.
* M2: Add word and character counts with optional content exclusions
Retain the complete reviewed change, including prior integration resolutions,
on current upstream.
M2: Add document word counts and semantic exclusions
* Refresh catalog hashes after merging main
---------
Co-authored-by: LabDennis <341377186+LabDennis@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Rework faux-redaction audit per maintainer review
- Paint-order aware: a rectangle counts as a cover only when painted
strictly after the text (positions from the joined content stream).
- Colour-aware: WCAG contrast between text and cover must be below 3.0,
so page backgrounds, table shading and highlights are not flagged.
- Fail closed: audit_redactions returns Err on undecodable content
streams (decoded_strict) and malformed /Annots; the operator bound is
an error, not a silent truncation.
- Graphics state carries across a page's content streams (one joined
walk); form XObjects still isolate their state at Do.
- Audit-only: the sanitize-for-sharing half is dropped (upstream #162).
- Parity entry marked partial, not shipped.
* Audit: register its layer, add a README, fail closed past 32 nested forms, document what it doesn't check
---------
Co-authored-by: Erick Barraza <ejbarraza1994@gmail.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M10: enhance camera images: straighten a page from four corners (ocr.camera-perspective)
Four corners on a page (any order, a convex quadrilateral) are warped to an
upright rectangle that replaces what the page shows, read at the page
picture's own resolution (at most 600 dpi) and kept at that physical size.
One undoable step through Replace Pages, so comments, links and bookmarks
stay.
- geom: a pure 3x3 homography solve and corner ordering (no dependencies);
collinear, concave and non-finite input gives None.
- engine: camera::warp (bilinear, over white, capped at 40 MP) and
Session::enhance_camera_page.
- automation: page_enhance_camera (corners in top-left-origin points).
- parity: ocr.camera-perspective is partial; the UI handles, automatic edge
detection and contrast cleanup are still missing.
Refs #1008.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: Enhance camera image: drag four corners on the page, then Enhance page (ocr.camera-perspective)
Scan & OCR ▸ Enhance camera image (ocr.enhance_camera) shows four corner
handles on the current page, inset 5% from its edges, with what will be cut
away dimmed. Enhance page straightens what they enclose through
Session::enhance_camera_page (one undoable step); Cancel and Esc leave the
page alone. The buttons float at the top right, clear of a centred page's
corners, and the instructions are a notice, as for Crop.
A command of its own, beside Enhance scanned file (ocr.enhance), which
stays for scan correction (#1012).
- ui-egui: camera_ui (handles, dimming, bar), QuickTool::EnhanceCamera,
quick_tool "enhance-camera" for ui.state and the shot example.
- Catalogs: the three new labels in every language with UI coverage
(plus es, pl, zh-hant); ATTRIBUTION.toml hashes updated.
- automation: page_enhance_camera is linked to the command.
- parity: ocr.camera-perspective lists the command and the UI test.
Refs #1008.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: Enhance camera image finds the document's edges (ocr.camera-perspective)
The corners now start on the photographed document's edges when they can
be found, else inset 5% as before.
camera_edges::detect_document, pure Rust and deterministic: shrink to 400
px, blur, Sobel edges thinned and thresholded against the 98th percentile;
a Hough transform where each edge votes within 6 degrees of its own
normal; pairs of near-horizontal and near-vertical lines make convex
quadrilaterals (at least 12% of the picture), kept when every side lies on
a matching edge along at least 55% of its length and scored by area times
the square of the mean support; each side is then refitted through its
edge points (total least squares). None when nothing convinces.
- Session::detect_camera_corners (user space); page_enhance_camera finds
the corners itself when `corners` is omitted and reports the corners it
used and whether they were detected; the UI command starts from them.
- Tests on synthetic photos: plain table, text on the sheet, wood grain
with a shadow, strong perspective, a 30 degree turn, a sheet running off
the picture, no document, white on white, bad input; end to end through
the engine and the tool.
- Parity notes: what is still missing (turning the result upright, rounded
corners, clean-up).
Refs #1008.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: after Enhance page, rotate, crop or organize the page (ocr.camera-perspective)
Enhance camera image no longer closes on Enhance page: the bar then offers
rotate counterclockwise and clockwise for the enhanced page (one undo step
each), Crop pages and Organize pages (which leave the tool for those
tools), and Done; Esc leaves too. A photo of a card often comes out a
quarter turn off until the page is turned upright automatically.
The two icon buttons are named for screen readers. Every label already
exists in the catalogs.
Refs #1008.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: magdale76 <16279778+magdale76@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Security: refuse email links that attach or insert a local file
Follow-up to #104. A document's mailto: link could ask the email app to
attach a file from the user's computer (Evolution, KMail and Claws Mail
honour attach=, Evolution and KMail also attachment=) or read one into
the body (Claws Mail's insert=).
document_url now refuses a mailto: address in which any word starting
with attach or insert (any case) is followed by =, wherever it stands
and after each layer of percent-decoding. It also refuses text that
some email tools decode before reading the address: RFC 2047 encoded
words, which KMail decodes across the whole address, and backslash
escapes, which xdg-email's echo decodes. The link is refused rather
than rewritten: PdfCraft doesn't change what a document asks to open,
and the email apps' parsers disagree with one another.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Security: show a link's host as the browser receives it, in punycode
Follow-up to #104. The link prompt's host now comes from
links::display_host, which reads it with url::Url: the webbrowser crate
hands the OS that crate's serialisation, and the web build's browser
parses by the same WHATWG standard. International hosts are shown in
punycode with a note, a label mixing writing systems (UTS #39 resolved
script sets) gets a red warning, numeric hosts such as 3232235777 show
as 192.168.1.1, and a host the browser would reject is refused as
malformed. The Unicode form isn't repeated in the prompt, so a
whole-script lookalike can't read as the real site.
url, idna and icu_properties become direct dependencies of
pdfcraft-engine; all three were already in the graph.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Security: refuse document addresses the URL parser rejects
Follow-up to #104. egui opens links through the webbrowser crate, which
parses the address with url::Url and, when that fails, treats it as a
local file path and opens file:///<cwd>/<address> in the browser.
document_url accepted addresses that don't parse, such as
mailto://a^b/x or https://a^b/ (a forbidden host code point), so a
document could still get the browser to open a local path.
document_url now also requires url::Url to accept the address with the
same scheme, which is exactly the parse webbrowser does first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M12: add calibrated 2D measurement tools
* M12: harden measurement tools for landing (#208)
Bounded snap targets (endpoints only for accepted segments, page-wide cap),
lenient extraction (deep q nesting and undecodable streams are skipped and
reported), per-page snap cache, measure::list reports unsupported entries
instead of failing, closed polygons with a repeated vertex, printable unit
labels (m²), cached panel listing, WinAnsi captions, indirect /VP kept,
measure.export skipped in the command test like other pickers, missing
translations, honest parity (scale and distance partial) and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M12: lay dynamic XFA forms out from their template (#60)
A dynamic XFA form is a PDF shell around an XML template: one placeholder
page ("requires Adobe Reader") and /NeedsRendering true. Every viewer
without an XFA engine shows the placeholder, and so did PrintCraft.
New crate printcraft-xfa (L3, already reserved in the layering table). It
reads the XDP packets, parses the template (XFA 3.3: subforms, areas,
fields, draws, exclusion groups, page sets, fonts, paragraphs, borders,
captions, rich text, inline JPEGs, occurrences, breaks, overflow leaders,
column widths), lays it out (positioned, tb, lr-tb, table/row; containers
without a width size to their content; flow across content areas and page
masters; header rows repeat after a break; hidden takes no space; page
number and count fields resolve) and writes real pages and AcroForm
widgets into the document: text, date (AFDate format and keystroke
actions from the picture clause), check boxes, radio groups, push buttons
with reset/print/save/URI actions. Standard-14 fonts stand in for Arial,
Courier New and friends; nothing is embedded.
The engine lays a dynamic form out when it opens it. The original bytes
stay: the layout is one appended revision, the widgets get appearances
from the forms crate, and the XFA packets remain so Adobe's viewers keep
rendering the form their way. A marker on the AcroForm (/PCXfaLayout)
stops a saved form from being laid out twice; each field keeps its SOM
path (/PCSom) for the data round trip to come. doc_info, the CLI's info
and the notice bar report the layout.
Checked on IRCC's IMM 5669 (Schedule A, Designer 6.2, 464 KB template,
AES-encrypted, usage rights): four pages and 308 fields in 27 ms, the
same page structure as the form, filled through form_fill, saved in
place with the original bytes intact and reopened with the values.
Not done, and said so in the parity notes: the datasets packet is neither
read nor written, so Adobe's viewers don't show values filled in here;
no FormCalc or XFA JavaScript (rows don't grow, nothing calculates);
choice lists are text fields; signature, image and barcode fields are
blank; metrics are approximate and fidelity is eyeballed, not measured.
Tests: crates/xfa (parsing, sizing, pagination with repeated headers,
PDF writing, hostile input), the engine (open, fill, incremental save,
reopen without a second layout), the automation tools (open, info,
render, fill, save, reopen) and the UI notice (kittest).
* M12: XFA forms read and write their datasets packet; static forms too (#60)
With the layout alone, a form filled in PrintCraft opened blank in Adobe
Reader, and one filled in Acrobat opened blank here: Adobe's viewers keep
the values in the XFA datasets packet, not in the AcroForm fields.
The xfa crate's new data module reads the datasets packet (normal binding:
a field's node is named after it under its named ancestor subforms,
repeated instances as repeated siblings) and writes it back from the
fields. Laying a form out now takes each field's value from its data node
(dates in ISO form shown in the field's pattern, check boxes and radio
groups by their on values) and gives a repeating subform or table row as
many instances as the data has, so rows another viewer added appear.
Every laid-out field carries its SOM path and its on/off items, so the
packet can be rebuilt from the AcroForm at any time.
The engine writes the datasets after every form edit (one revision with
the field change), and on open applies the datasets to the fields of a
static XFA form, or of a dynamic one laid out earlier, when another
viewer changed them since. The static-form notice now says the two are
kept in step instead of warning that Acrobat may disagree.
Checked on IRCC's IMM 5669: fill, save in place (original bytes intact),
and the file holds <IMM_5669><page1><familyName>SINGH</familyName>…, the
structure Acrobat writes for this form; reopening shows the values.
Not done: explicit bind refs, global binding and data descriptions are
not followed; no import or export of standalone XML or XDP data files.
* M12: XFA layout memoizes container sizes, bounding measurement work (#60)
A container without a width measured its content for its width and again for its
height at every level, so nested width-less subforms took 2^depth measurements, all
synchronously in Session::open. Container sizes are now cached per (node, width,
depth), the root and page-area items keep stable addresses instead of being cloned
per measurement, and a measurement budget turns anything left into TooLarge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M12: rustfmt the merged XFA notice (#60)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M12: XFA datasets are merged into, not replaced; capped; UTF-16 kept; rewrites recorded (#60)
- write_datasets merged nothing: it replaced <xfa:data> with the AcroForm-bound values
alone, dropping unbound, namespaced and deep data. It now edits the existing packet
text in place: a bound node's text is replaced only when it differs, missing nodes are
added below the deepest existing one, and everything else (unbound data, other
namespaces, attributes, comments, layout) stays byte for byte. A packet of an XFA array
that relies on the envelope's prefixes is read inside a wrapper declaring them.
- What can't be written (a node holding structured content, too-deep paths or absurd
SOM indices, conflicting fields, an unreadable or non-UTF packet) comes back as
DatasetsWrite.warnings; the engine keeps them in Document.xfa_warnings and
info.warnings (surviving re-reads), and doc_info reports xfa_warnings.
- Building data counted same-name siblings for every one it added (quadratic in an
untrusted index) with no total cap. Children are now indexed by name, indices above
10,000 and paths deeper than 64 are refused, and one write creates at most 20,000 nodes.
- Packets are decoded exactly (UTF-8, UTF-16 LE/BE with or without BOM) and written back
in the encoding they came in; anything else is reported and left untouched instead of
being rewritten from a lossy UTF-8 reading.
- A static XFA form whose fields are rewritten from the datasets on open now says so in
info.warnings, naming the fields.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The app, crates, binaries, bundle id, packaging, icons, screenshots and docs are now
PdfCraft / pdfcraft (repo storytold/pdfcraft). On first launch the desktop app moves the
PrintCraft settings and crash-recovery folders to the new name, and both apps read settings
saved under the old storage key, so upgrades keep recent files, preferences and unsaved work.
The signing test fixtures keep their PrintCraft subject names (they are binary).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
aiongg