diff --git a/ROADMAP.md b/ROADMAP.md
index 5da570273..796759163 100644
--- a/ROADMAP.md
+++ b/ROADMAP.md
@@ -270,6 +270,7 @@ Ranked; detail and the full milestone table in [docs/roadmap.md](docs/roadmap.md
 - **2026-10-14 (M3, control-click candidate):** Coordinate clicks retain hover warmup and pair press/release in one input pass so slow frames do not turn a click into a hold. Text multi-click selection accepts the actual press event when egui has already cleared its origin. Regression cases cover slow-frame button activation, disabled controls and coalesced text selection; estimates unchanged.
 - **2026-10-14 (community, M7, #128 Hebrew in Add text):** Add text and `page_add_text` draw Hebrew with the craft-fonts Hebr face (Noto Sans Hebrew), through the same shaped path as Arabic and Thai: right-to-left display order with numbers and Latin in place, points and cantillation kept on their letter as one Type 3 glyph, ToUnicode and per-line ActualText so extraction, search and the editor get typing order. Builds without the face refuse Hebrew rather than write `?`. Regular style only. Estimates unchanged.
 - **2026-10-14 (M9, #1787):** Changes after signing are judged by the role an object held when signed for a page's resources too: a rewritten font, XObject, graphics state or resources dictionary is page content however its new version is labelled, so a `/FT` or `/Subtype /Widget` added by the attacker no longer reads as a permitted form fill. A category dictionary that only gained a name is judged as before.
+- **2026-10-14 (M3, full screen as presentation, #379/#1459/#1353):** Full Screen Mode shows one page (or one spread) at a time fitted to the screen on black, with no tools; click, Space, Enter and the arrows turn pages; Esc restores the display from before. Transitions, auto-advance and loop remain planned.
 - **2026-10-13 (M3, native-opening candidate):** Chosen tools survive preparation, conversion and password retries; startup intake waits for pending preparation. Regression tests cover completion, cancellation and document identity. Estimates unchanged.
 - **2026-10-13 (community, M3, #531 touchpad momentum):** On Wayland a two-finger swipe keeps gliding after the fingers lift and slows to a stop, measured from the gesture's last 0.1 s and decaying with a 0.35 s time constant through the #759 1:1 path. Any wheel input, click, key, zoom or edge ends it (fingers resting on the touchpad don't yet: the vendored winit binds no Wayland hold gestures); single-page paging, macOS (which sends its own momentum), the web, and Animation effects Off never glide. Unit tests for the physics and two headless view tests. Estimates unchanged.
 - **2026-10-13 (M3, native-open admission):** Later prepared replies stay queued while a modal or native picker owns the foreground. Picker completion, cancellation and abandonment wake retained opens. Regressions cover recipient ownership, exactly-once admission, source/history preservation and one-shot repaint requests. Estimates unchanged.
diff --git a/crates/ui-egui/src/canvas.rs b/crates/ui-egui/src/canvas.rs
index 4dcf95b01..6eff992d8 100644
--- a/crates/ui-egui/src/canvas.rs
+++ b/crates/ui-egui/src/canvas.rs
@@ -81,6 +81,17 @@ pub enum Fit {
     None,
 }
 
+/// The page display as it was before full screen, put back on leaving it
+/// ([`DocView::enter_presentation`]).
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub struct SavedDisplay {
+    pub layout: PageLayout,
+    pub continuous: bool,
+    pub cover: bool,
+    pub fit: Fit,
+    pub zoom: f32,
+}
+
 /// The base page display: one page across, or a two-page spread. Whether it scrolls continuously
 /// is a separate flag (`continuous`), as in Acrobat, so every combination is reachable (#752).
 #[derive(Clone, Copy, Debug, PartialEq, Eq)]
@@ -414,6 +425,9 @@ pub struct DocView {
     pub flash: Option<(usize, [f32; 4], f64)>,
     /// Compare files: differences shaded on this document's pages (page, user-space box, colour).
     pub compare_marks: Vec<(usize, [f32; 4], Color32)>,
+    /// Full screen (Acrobat's Full Screen Mode): the display saved on entering it, while the view
+    /// shows one page or spread at a time, fitted to the screen. `None` outside full screen.
+    presentation: Option<SavedDisplay>,
     pages: HashMap<usize, PageTex>,
     /// Pages the renderer could not draw, with the reason (never re-requested).
     errors: HashMap<usize, String>,
@@ -456,6 +470,9 @@ pub struct DocView {
     clicks: u32,
     last_press_time: f64,
     last_press_pos: Option<Pos2>,
+    /// Full screen: a click's page turn, when it falls due (input time) and which way. It waits
+    /// out the double-click time, as the click may be the first of a double-click selecting a word.
+    present_turn: Option<(f64, bool)>,
     last_queue: Vec<RenderRequest>,
     /// Finished renders wait in the pool instead of reaching the view (tests): what the view
     /// shows before a raster arrives can be looked at however fast the renderer is.
@@ -729,6 +746,7 @@ impl DocView {
             single_edges: None,
             flash: None,
             compare_marks: Vec::new(),
+            presentation: None,
             pages: HashMap::new(),
             errors: HashMap::new(),
             waiting_since: HashMap::new(),
@@ -752,6 +770,7 @@ impl DocView {
             clicks: 0,
             last_press_time: 0.0,
             last_press_pos: None,
+            present_turn: None,
             last_queue: Vec::new(),
             hold_rasters: false,
             viewport_w: 800.0,
@@ -852,9 +871,9 @@ impl DocView {
     }
 
     /// The document was replaced by a newer version of its file (#431). The reader's place
-    /// stays: zoom, layout, rotation, page, scroll, view history and the find bar, the snapshot
-    /// marker and its pending close, and the page images on screen until their replacements
-    /// are drawn, so nothing flashes. Everything that pointed into the old version (a selected
+    /// stays: zoom, layout, rotation, page, scroll, full screen, view history and the find bar,
+    /// the snapshot marker and its pending close, and the page images on screen until their
+    /// replacements are drawn, so nothing flashes. Everything that pointed into the old version (a selected
     /// comment, a field being typed in, text being edited, a drag, page selection) starts
     /// afresh, so no stale index reaches the new one.
     pub fn document_replaced(&mut self, info: &DocInfo) {
@@ -875,6 +894,8 @@ impl DocView {
         fresh.snapshot = self.snapshot.clone();
         fresh.close_requested = self.close_requested;
         fresh.cover = self.cover;
+        // Still presenting, with the display to go back to on leaving.
+        fresh.presentation = self.presentation.take();
         fresh.back = std::mem::take(&mut self.back);
         fresh.forward = std::mem::take(&mut self.forward);
         fresh.find = self.find.take();
@@ -1284,8 +1305,7 @@ impl DocView {
         let last = self.page_count.saturating_sub(1);
         let (target, first) = match self.layout {
             PageLayout::TwoUp => {
-                // Spreads are [0, 1], [2, 3], … or, with a cover page, [0], [1, 2], [3, 4], ….
-                let first = if self.cover { c.saturating_sub((c + 1) % 2) } else { c - c % 2 };
+                let first = self.spread_first(c);
                 let target = match (forward, self.cover && c == 0) {
                     (true, true) => 1,
                     (true, false) => first.saturating_add(2),
@@ -1381,6 +1401,37 @@ impl DocView {
         self.reset_coarse_state();
     }
 
+    /// Full screen, as Acrobat's Full Screen Mode (#379, #1459): one page at a time (or one
+    /// spread, when two-page view was on: #1353), fitted to the screen, from the current page.
+    /// The display it replaces is kept for [`Self::leave_presentation`]. A no-op while presenting.
+    pub fn enter_presentation(&mut self) {
+        if self.presentation.is_some() {
+            return;
+        }
+        self.presentation =
+            Some(SavedDisplay { layout: self.layout, continuous: self.continuous, cover: self.cover, fit: self.fit, zoom: self.zoom });
+        self.continuous = false;
+        self.fit = Fit::Page;
+        self.selection = None;
+        self.goto = Some((self.current, 0.0));
+    }
+
+    /// Leave full screen: the display from before it comes back, at the page reached meanwhile.
+    pub fn leave_presentation(&mut self) {
+        let Some(saved) = self.presentation.take() else { return };
+        self.layout = saved.layout;
+        self.continuous = saved.continuous;
+        self.cover = saved.cover;
+        self.fit = saved.fit;
+        self.zoom = saved.zoom;
+        self.goto = Some((self.current, 0.0));
+    }
+
+    /// Whether the view is in full screen's one-page-at-a-time display.
+    pub fn presenting(&self) -> bool {
+        self.presentation.is_some()
+    }
+
     /// Switch the base page display (Single or Two-page), leaving continuous scrolling as it is.
     /// A no-op when the layout is already current, so re-selecting it never yanks a scrolled view
     /// back to the top.
@@ -1967,14 +2018,30 @@ impl DocView {
         }
     }
 
+    /// The first page of the two-page spread page `c` is in: spreads are [0, 1], [2, 3], … or,
+    /// with a cover page, [0], [1, 2], [3, 4], ….
+    fn spread_first(&self, c: usize) -> usize {
+        if self.cover { c.saturating_sub((c + 1) % 2) } else { c - c % 2 }
+    }
+
     fn fit_zoom(&mut self, info: &DocInfo) {
         let largest = |side: fn((f32, f32)) -> f32| info.pages.iter().map(|p| side(self.display_size(p))).fold(1.0, f32::max);
         let max_w = largest(|s| s.0);
-        // A single page shown on its own fits that page. Every other display (scrolling, or a
-        // two-page spread) fits its largest page, so the zoom holds still while pages of other
-        // sizes scroll or page past.
+        // A single page shown on its own fits that page, and full screen in two-page view fits
+        // the spread it shows (review on #2070). Every other display (scrolling, or two-page
+        // view in the window) fits its largest page, so the zoom holds still while pages of
+        // other sizes scroll or page past.
         let (w, h) = if self.layout == PageLayout::Single && !self.continuous {
             info.pages.get(self.current).map_or_else(|| (max_w, largest(|s| s.1)), |p| self.display_size(p))
+        } else if self.presentation.is_some() && self.layout == PageLayout::TwoUp && !self.continuous {
+            let first = self.spread_first(self.current);
+            let last = if self.cover && first == 0 { 0 } else { first.saturating_add(1) };
+            let spread: Vec<(f32, f32)> = info.pages.iter().skip(first).take(last - first + 1).map(|p| self.display_size(p)).collect();
+            if spread.is_empty() {
+                (max_w, largest(|s| s.1))
+            } else {
+                (spread.iter().map(|s| s.0).fold(1.0, f32::max), spread.iter().map(|s| s.1).fold(1.0, f32::max))
+            }
         } else {
             (max_w, largest(|s| s.1))
         };
@@ -2326,6 +2393,16 @@ pub fn shortcuts(view: &mut DocView, ctx: &egui::Context, speed: crate::scroll_s
     if key(Key::End) {
         view.go_to_page(usize::MAX);
     }
+    // Full screen: Space and Enter go forward a page and Backspace back, as in Acrobat (the
+    // arrows and Page Up / Page Down already turn pages where nothing scrolls, below).
+    if view.presentation.is_some() {
+        if key(Key::Space) || key(Key::Enter) {
+            view.step_page(true);
+        }
+        if key(Key::Backspace) {
+            view.step_page(false);
+        }
+    }
     // As in Acrobat: → / ← go to the next / previous page in every layout (#185), and so do
     // ⌘Page Down / ⌘Page Up, or plain Page Down / Page Up in single-page view.
     let command = ctx.input(|i| i.modifiers.command);
@@ -2501,6 +2578,22 @@ pub fn document_area(app: &mut PdfCraftApp, index: usize, ui: &mut egui::Ui) {
     // Exclude the previous frame's scrollbar tracks from gesture activation.
     let navigation_rect = if view.viewport_screen.is_positive() { avail.intersect(view.viewport_screen) } else { avail };
     let navigation_enabled = app.dialog.is_none() && app.close_request.is_none() && !app.palette_open && ui.is_enabled() && ui.input(|i| i.focused);
+    // Full screen: a click on the document goes forward a page and a shift-click back, as in
+    // Acrobat, unless the click did something else (a link, a word selected). Decided below,
+    // once the pages have had the click.
+    let present_click = view.presentation.is_some()
+        && navigation_enabled
+        && ui.rect_contains_pointer(navigation_rect)
+        && ui.input(|i| i.pointer.primary_clicked())
+        && app.quick_tool == QuickTool::Select;
+    // Shift as held now, or as the click's own event carried it (a synthetic click).
+    let present_back = present_click
+        && ui.input(|i| {
+            i.modifiers.shift
+                || i.events.iter().any(|e| {
+                    matches!(e, egui::Event::PointerButton { button: egui::PointerButton::Primary, pressed: false, modifiers, .. } if modifiers.shift)
+                })
+        });
     if zoom_delta.is_finite() && zoom_delta > 0.0 && zoom_delta != 1.0 && navigation_enabled && ui.rect_contains_pointer(navigation_rect) {
         let z = view.zoom * zoom_delta;
         match ui.input(|i| i.pointer.hover_pos()) {
@@ -4000,6 +4093,26 @@ pub fn document_area(app: &mut PdfCraftApp, index: usize, ui: &mut egui::Ui) {
         Some(comments::CanvasAction::CopyImageFile(p, i)) => image_action = Some(crate::edit_text_ui::ImageAction::CopyFile(p, i)),
         None => {}
     }
+    // Full screen: the click turns the page unless it did something else first. It waits out the
+    // double-click time: turning on the first click's release sent a double-click's second click,
+    // meant to select a word, to the next page (review on #2070). A selection cancels it, and so
+    // do a link followed meanwhile and leaving full screen; a double-click elsewhere still turns
+    // once.
+    let now = ui.input(|i| i.time);
+    if present_click && clicked_link.is_none() && view.selection.is_none() && view.clicks < 2 {
+        let delay = ui.ctx().options(|o| o.input_options.max_double_click_delay);
+        view.present_turn = Some((now + delay, !present_back));
+    }
+    if let Some((due, forward)) = view.present_turn {
+        if clicked_link.is_some() || view.selection.is_some() || view.presentation.is_none() {
+            view.present_turn = None;
+        } else if now >= due {
+            view.present_turn = None;
+            view.step_page(forward);
+        } else {
+            ui.ctx().request_repaint_after(std::time::Duration::from_secs_f64((due - now).max(0.0)));
+        }
+    }
     match clicked_link {
         Some(LinkTarget::Page(p, dest)) => view.go_to_dest(p, dest, info),
         Some(LinkTarget::Uri(u)) => app.request_document_url(&u, crate::LinkOrigin::Link),
@@ -4118,8 +4231,9 @@ pub fn document_area(app: &mut PdfCraftApp, index: usize, ui: &mut egui::Ui) {
     if copy_selected {
         app.execute("edit.copy");
     }
-    // Read mode hides the tools (#2646).
-    if app.mode != crate::Mode::Read {
+    // Read mode hides the tools (#2646), and full screen is the page and nothing else (#1459);
+    // the quick tools come back with the window.
+    if app.mode != crate::Mode::Read && !app.full_screen {
         quick_bar(app, avail, ui);
     }
     if let Some((source, file, destination)) = remote_open {
@@ -6412,6 +6526,55 @@ trailer << /Root 1 0 R >>
         }
     }
 
+    /// Review on #2070: full screen in two-page view fits the spread it shows, the cover page
+    /// on its own included; two-page view in the window keeps one zoom for the document.
+    #[test]
+    fn full_screen_two_page_view_fits_the_spread_it_shows() {
+        let page =
+            |width: f32, height: f32| pdfcraft_render::PageInfo { width, height, label: String::new(), crop: [0.0, 0.0, width, height], rotation: 0 };
+        // Spreads [0, 1] small, [2, 3] large; with a cover page [0], [1, 2] mixed, [3].
+        let info = DocInfo { pages: vec![page(300.0, 400.0), page(300.0, 400.0), page(600.0, 800.0), page(600.0, 800.0)], ..Default::default() };
+        let mut v = DocView::new(DocId(1), &info, ViewDefaults::default());
+        (v.layout, v.continuous, v.viewport_w, v.viewport_h) = (PageLayout::TwoUp, false, 1000.0, 800.0);
+        v.fit = Fit::Page;
+        v.fit_zoom(&info);
+        let windowed = v.zoom;
+        v.enter_presentation();
+        v.fit_zoom(&info);
+        let small = v.zoom;
+        assert!(small > windowed * 1.9, "the small spread fills the screen: {small} vs {windowed}");
+        v.current = 3;
+        v.fit_zoom(&info);
+        assert!((v.zoom - windowed).abs() < 1e-4, "the large spread fits as before");
+        v.current = 1;
+        v.fit_zoom(&info);
+        assert_eq!(v.zoom, small, "page 2 is in the first spread");
+        // With a cover page: [0] alone, then [1, 2] (the large page decides), then [3].
+        v.cover = true;
+        v.current = 0;
+        v.fit_zoom(&info);
+        assert_eq!(v.zoom, small, "the cover page alone");
+        v.current = 1;
+        v.fit_zoom(&info);
+        assert!((v.zoom - windowed).abs() < 1e-4, "page 2 shares a spread with the large page 3");
+        // Scrolling while in full screen fits the document, as scrolling does in the window.
+        (v.continuous, v.current) = (true, 0);
+        v.fit_zoom(&info);
+        assert!((v.zoom - windowed).abs() < 1e-4, "continuous full screen keeps one zoom");
+        v.continuous = false;
+        // The cover page is a spread of its own even when the next page is larger.
+        let mixed = DocInfo { pages: vec![page(300.0, 400.0), page(600.0, 800.0), page(600.0, 800.0)], ..Default::default() };
+        v.current = 0;
+        v.fit_zoom(&mixed);
+        assert_eq!(v.zoom, small, "the small cover alone, not with page 2");
+        // Leaving full screen brings the document-wide fit back.
+        v.leave_presentation();
+        (v.fit, v.current) = (Fit::Page, 0);
+        (v.layout, v.continuous) = (PageLayout::TwoUp, false);
+        v.fit_zoom(&info);
+        assert!((v.zoom - windowed).abs() < 1e-4, "in the window, one zoom for the document");
+    }
+
     #[test]
     fn fit_width_fits_the_shown_page_in_single_page_view_only() {
         let page =
diff --git a/crates/ui-egui/src/commands.rs b/crates/ui-egui/src/commands.rs
index 49a0e20b7..2f888764a 100644
--- a/crates/ui-egui/src/commands.rs
+++ b/crates/ui-egui/src/commands.rs
@@ -270,7 +270,7 @@ impl PdfCraftApp {
                 let on = !self.full_screen;
                 match self.ctx.clone() {
                     Some(ctx) => self.set_full_screen(&ctx, on),
-                    None => self.full_screen = on,
+                    None => self.apply_full_screen(on),
                 }
             }
             "view.read_mode" => self.switch_mode(if self.mode == Mode::Read { Mode::AllTools } else { Mode::Read }, false),
diff --git a/crates/ui-egui/src/create_ui.rs b/crates/ui-egui/src/create_ui.rs
index 63f803525..1e4e69603 100644
--- a/crates/ui-egui/src/create_ui.rs
+++ b/crates/ui-egui/src/create_ui.rs
@@ -103,7 +103,11 @@ impl PdfCraftApp {
         // The reading-colours preference is app-wide: the newly created document starts with it.
         self.session.set_reading_colors(id, self.reading_colors);
         let info = &self.session.get(id).ok_or("the new document could not be opened")?.info;
-        self.views.push(crate::DocView::new(id, info, self.view_defaults));
+        let mut view = crate::DocView::new(id, info, self.view_defaults);
+        if self.full_screen {
+            view.enter_presentation();
+        }
+        self.views.push(view);
         self.active = Some(self.views.len() - 1);
         Ok(())
     }
diff --git a/crates/ui-egui/src/files.rs b/crates/ui-egui/src/files.rs
index 03c773807..1ec9d383f 100644
--- a/crates/ui-egui/src/files.rs
+++ b/crates/ui-egui/src/files.rs
@@ -816,7 +816,11 @@ impl PdfCraftApp {
                 // The reading-colours preference is app-wide: the newly created document starts with it.
                 self.session.set_reading_colors(id, self.reading_colors);
                 let Some(doc) = self.session.get(id) else { return };
-                self.views.push(crate::DocView::new(id, &doc.info, self.view_defaults));
+                let mut view = crate::DocView::new(id, &doc.info, self.view_defaults);
+                if self.full_screen {
+                    view.enter_presentation();
+                }
+                self.views.push(view);
                 self.active = Some(self.views.len() - 1);
                 self.notify_tr(message);
             }
diff --git a/crates/ui-egui/src/lib.rs b/crates/ui-egui/src/lib.rs
index 84467e60d..6d5c52b3e 100644
--- a/crates/ui-egui/src/lib.rs
+++ b/crates/ui-egui/src/lib.rs
@@ -525,6 +525,8 @@ pub struct PdfCraftApp {
     pub quick_tool: QuickTool,
     /// The tool to go back to when Space, held for a temporary Hand, is released.
     space_hand: Option<QuickTool>,
+    /// The tool before full screen, given back on leaving it (see [`Self::apply_full_screen`]).
+    full_screen_tool: Option<QuickTool>,
     /// Comment author, per-tool colours and widths, pin.
     pub comment_prefs: comments::CommentPrefs,
     /// Resolved colours, including the current OS theme when following the system.
@@ -919,6 +921,7 @@ impl PdfCraftApp {
             right_panel_closed: false,
             quick_tool: QuickTool::Select,
             space_hand: None,
+            full_screen_tool: None,
             comment_prefs: Default::default(),
             theme: ThemeKind::Light,
             theme_preference: ThemePreference::Light,
@@ -1351,11 +1354,18 @@ impl PdfCraftApp {
             };
         }
         let initial = doc.initial_view();
-        self.views.push(DocView::new(id, &doc.info, self.view_defaults));
+        let view = DocView::new(id, &doc.info, self.view_defaults);
+        self.views.push(view);
         if activate {
             self.active = Some(self.views.len() - 1);
         }
         self.apply_initial_view(self.views.len() - 1, &initial);
+        // After the document's own initial view, so leaving full screen comes back to it.
+        if self.full_screen
+            && let Some(view) = self.views.last_mut()
+        {
+            view.enter_presentation();
+        }
         // Full screen is asked for, never taken: a document can't put the app in full screen on
         // its own (the prompt is `dialogs::full_screen_prompt`).
         if activate && initial.full_screen {
@@ -1595,10 +1605,32 @@ impl PdfCraftApp {
 
     /// Enter or leave full-screen reading (Acrobat: View ▸ Full Screen Mode, ⌘L).
     pub fn set_full_screen(&mut self, ctx: &egui::Context, on: bool) {
-        self.full_screen = on;
+        self.apply_full_screen(on);
         ctx.send_viewport_cmd(egui::ViewportCommand::Fullscreen(on));
     }
 
+    /// The full-screen state without the window: every document shows one page (or spread) at a
+    /// time fitted to the screen while it is on (Acrobat's Full Screen Mode, #379, #1459), and
+    /// gets its display back when it is off.
+    pub fn apply_full_screen(&mut self, on: bool) {
+        // A click turns the page only with the Select tool, and full screen hides the tools:
+        // select it there, and give the tool back on leaving (review on #2070).
+        if on && !self.full_screen {
+            self.full_screen_tool = Some(self.quick_tool);
+            self.quick_tool = QuickTool::Select;
+        } else if !on && let Some(tool) = self.full_screen_tool.take() {
+            self.quick_tool = tool;
+        }
+        self.full_screen = on;
+        for view in &mut self.views {
+            if on {
+                view.enter_presentation();
+            } else {
+                view.leave_presentation();
+            }
+        }
+    }
+
     /// Answer the Full Screen mode prompt a document raised on opening: enter it, or leave the
     /// window as it is.
     pub fn resolve_full_screen_prompt(&mut self, ctx: &egui::Context, allow: bool) {
@@ -3168,19 +3200,16 @@ impl eframe::App for PdfCraftApp {
             self.window_title = title;
         }
         if self.full_screen && self.active.is_some() {
-            // Full screen: the page, nothing else (Esc or ⌘L to leave).
-            let t = theme::Tokens::get(&ctx);
-            egui::CentralPanel::default().frame(egui::Frame::NONE.fill(if t.dark() { t.pasteboard } else { egui::Color32::from_gray(32) })).show(
-                ui,
-                |ui| {
-                    if let Some(i) = self.active {
-                        match compare_ui::side_by_side(self, i) {
-                            Some((old, new)) => compare_ui::compare_area(self, old, new, ui),
-                            None => canvas::document_area(self, i, ui),
-                        }
+            // Full screen: the page on black, nothing else, as Acrobat's Full Screen Mode (Esc
+            // or ⌘L to leave).
+            egui::CentralPanel::default().frame(egui::Frame::NONE.fill(egui::Color32::BLACK)).show(ui, |ui| {
+                if let Some(i) = self.active {
+                    match compare_ui::side_by_side(self, i) {
+                        Some((old, new)) => compare_ui::compare_area(self, old, new, ui),
+                        None => canvas::document_area(self, i, ui),
                     }
-                },
-            );
+                }
+            });
             dialogs::show(self, &ctx);
             // Notices too: a refused field value or a failed save must be seen in full screen.
             self.show_progress(&ctx);
diff --git a/crates/ui-egui/tests/ui_group/text_select.rs b/crates/ui-egui/tests/ui_group/text_select.rs
index 9ed4e9d5d..509775f6a 100644
--- a/crates/ui-egui/tests/ui_group/text_select.rs
+++ b/crates/ui-egui/tests/ui_group/text_select.rs
@@ -544,3 +544,84 @@ fn coalesced_primary_clicks_select_line_then_spaced_click_clears() {
         assert_eq!(doc.saved_bytes(), saved);
     }
 }
+
+/// Review on #2070: a click on the page in full screen waits out the double-click time before
+/// it turns the page, and a link clicked meanwhile used to leave that turn pending: the link
+/// jumped to page 3, then the page moved on to page 4.
+#[test]
+fn full_screen_link_click_cancels_the_pending_page_turn() {
+    let page = "<< /Type /Page /Parent 2 0 R /MediaBox [0 0 300 200] /Contents 4 0 R /Resources << /Font << /F1 5 0 R >> >> >>";
+    let four_pages = String::from_utf8(two_lines())
+        .unwrap()
+        .replace("/Kids [3 0 R] /Count 1", "/Kids [3 0 R 6 0 R 7 0 R 8 0 R] /Count 4")
+        .replace("/Contents 4 0 R /Resources", "/Annots [9 0 R] /Contents 4 0 R /Resources")
+        .replace(
+            "trailer",
+            &format!(
+                "6 0 obj {page} endobj\n7 0 obj {page} endobj\n8 0 obj {page} endobj\n9 0 obj << /Type /Annot /Subtype /Link /Rect [200 20 280 60] /Border [0 0 0] /Dest [7 0 R /Fit] >> endobj\ntrailer"
+            ),
+        )
+        .into_bytes();
+    let (mut h, _) = harness_with(four_pages, |_| {});
+    h.state_mut().apply_full_screen(true);
+    crate::support::wait_until(&mut h, "the page in full screen", |app| app.views[0].glyph_screen_pos(0, 5).is_some() && !app.render_pending());
+    let r = h.state().views[0].page_screen_rect(0).expect("page 1 on screen");
+    let at = |x: f32, y: f32| egui::pos2(r.left() + x / 300.0 * r.width(), r.top() + (200.0 - y) / 200.0 * r.height());
+    // A click on blank page area, then, within the double-click time, a click on the link.
+    h.hover_at(at(150.0, 90.0));
+    h.run_steps(1);
+    click(&mut h, at(150.0, 90.0));
+    h.run_steps(3);
+    h.hover_at(at(240.0, 40.0));
+    h.run_steps(1);
+    click(&mut h, at(240.0, 40.0));
+    h.run_steps(30);
+    assert_eq!(h.state().views[0].current, 2, "the link's page, and no turn after it");
+}
+
+/// Review on #2070: in full screen a click goes forward a page, but a double-click selects the
+/// word and stays: the click waits out the double-click time before turning. Turning on the first
+/// click's release had sent the second click to the next page. Leaving full screen meanwhile
+/// drops the pending turn.
+#[test]
+fn full_screen_double_click_selects_a_word_and_stays_on_the_page() {
+    // The same page twice.
+    let two_pages = String::from_utf8(two_lines())
+        .unwrap()
+        .replace("/Kids [3 0 R] /Count 1", "/Kids [3 0 R 6 0 R] /Count 2")
+        .replace(
+            "trailer",
+            "6 0 obj << /Type /Page /Parent 2 0 R /MediaBox [0 0 300 200] /Contents 4 0 R /Resources << /Font << /F1 5 0 R >> >> >> endobj\ntrailer",
+        )
+        .into_bytes();
+    let (mut h, _) = harness_with(two_pages, |_| {});
+    h.state_mut().apply_full_screen(true);
+    crate::support::wait_until(&mut h, "the page in full screen", |app| app.views[0].glyph_screen_pos(0, 5).is_some() && !app.render_pending());
+    let at = h.state().views[0].glyph_screen_pos(0, 5).expect("text layer");
+    h.hover_at(at);
+    h.run_steps(1);
+
+    // A double-click selects "quick" and stays on page 1, also once the double-click time is over.
+    click(&mut h, at);
+    click(&mut h, at);
+    assert_eq!(h.state().views[0].selected_text().as_deref(), Some("quick"));
+    h.run_steps(30);
+    assert_eq!(h.state().views[0].current, 0, "the double-click didn't turn the page");
+
+    // A single click turns it once the double-click time is over.
+    // Entering full screen again clears the selection.
+    h.state_mut().apply_full_screen(false);
+    h.state_mut().apply_full_screen(true);
+    h.run_steps(30);
+    click(&mut h, at);
+    h.run_steps(30);
+    assert_eq!(h.state().views[0].current, 1, "a click goes forward");
+
+    // A click right before leaving full screen doesn't turn the page after it.
+    h.state_mut().views[0].go_to_page(0);
+    h.run_steps(30);
+    click(&mut h, at);
+    h.state_mut().apply_full_screen(false);
+    h.run_steps(30);
+    assert_eq!(h.state().views[0].current, 0, "no page turn after leaving");
+}
diff --git a/crates/ui-egui/tests/view.rs b/crates/ui-egui/tests/view.rs
index 39ea83df7..efffdedbd 100644
--- a/crates/ui-egui/tests/view.rs
+++ b/crates/ui-egui/tests/view.rs
@@ -2,6 +2,7 @@
 
 use egui::{Key, Modifiers, MouseWheelUnit, TouchPhase};
 use egui_kittest::Harness;
+use egui_kittest::kittest::Queryable;
 use pdfcraft_ui_egui::PdfCraftApp;
 
 /// Three 300×400 pt pages. Page 1 links to page 3.
@@ -1645,3 +1646,139 @@ fn long_view_menu_fits_a_short_window() {
     h.run_steps(4);
     assert_eq!(h.state().right, Some(pdfcraft_ui_egui::RightPanel::Bookmarks));
 }
+
+fn click_with(h: &mut Harness<'static, PdfCraftApp>, pos: egui::Pos2, modifiers: Modifiers) {
+    h.hover_at(pos);
+    h.run_steps(1);
+    for pressed in [true, false] {
+        h.event(egui::Event::PointerButton { pos, button: egui::PointerButton::Primary, pressed, modifiers });
+    }
+    h.run_steps(4);
+}
+
+/// Full screen is Acrobat's Full Screen Mode (#379, #1459): one page at a time, fitted to the
+/// screen, with no tools; a click, Space, Enter or → go forward a page and a ⇧-click, Backspace
+/// or ← back; Esc brings the display from before it back, at the page reached.
+#[test]
+fn full_screen_shows_one_fitted_page_and_clicks_turn_it() {
+    use pdfcraft_ui_egui::canvas::Fit;
+    let mut h = harness(&[("layout", "continuous"), ("zoom", "50")]);
+    h.run_steps(4);
+    assert!(h.state().views[0].continuous(), "continuous before");
+    h.key_press_modifiers(Modifiers::COMMAND, Key::L);
+    h.run_steps(6);
+    assert!(h.state().full_screen);
+    let v = &h.state().views[0];
+    assert!(!v.continuous(), "one page at a time");
+    assert_eq!(v.fit, Fit::Page, "fitted to the screen");
+    assert!(rect(&h, 0).is_some() && rect(&h, 1).is_none(), "only page 1 is on screen");
+    let r = rect(&h, 0).unwrap();
+    let vp = h.state().views[0].viewport_rect();
+    assert!(r.height() <= vp.height() + 1.0 && r.width() <= vp.width() + 1.0, "the page fits: {r:?} in {vp:?}");
+    assert!(h.query_by_label("Select (V)").is_none(), "no quick tools in full screen");
+    click_with(&mut h, r.center(), Modifiers::NONE);
+    assert_eq!(h.state().views[0].current, 1, "a click goes forward a page");
+    h.key_press(Key::ArrowRight);
+    h.run_steps(4);
+    assert_eq!(h.state().views[0].current, 2, "→ goes forward");
+    h.key_press(Key::Backspace);
+    h.run_steps(4);
+    assert_eq!(h.state().views[0].current, 1, "Backspace goes back");
+    let r = rect(&h, 1).expect("page 2 on screen");
+    click_with(&mut h, r.center(), Modifiers::SHIFT);
+    assert_eq!(h.state().views[0].current, 0, "a shift-click goes back");
+    h.key_press(Key::Space);
+    h.run_steps(4);
+    assert_eq!(h.state().views[0].current, 1, "Space goes forward");
+    h.key_press(Key::Escape);
+    h.run_steps(4);
+    assert!(!h.state().full_screen, "Escape leaves full screen");
+    let v = &h.state().views[0];
+    assert!(v.continuous(), "the display from before comes back");
+    assert_eq!(v.fit, Fit::None);
+    assert!((v.zoom - 0.5).abs() < 1e-3, "zoom back to 50%: {}", v.zoom);
+    assert_eq!(v.current, 1, "at the page reached in full screen");
+    h.run_steps(2);
+    assert!(h.query_by_label("Select (V)").is_some(), "the quick tools are back");
+}
+
+/// #2070 review: full screen survives the file being reloaded (Esc still brings the display from
+/// before back), and a document opened in full screen takes its own initial view first, so Esc
+/// comes back to that and full screen stays one spread at a time.
+#[test]
+fn full_screen_survives_a_reload_and_keeps_a_new_documents_own_view() {
+    use pdfcraft_ui_egui::canvas::{Fit, PageLayout};
+    let mut h = harness(&[("layout", "continuous"), ("zoom", "50")]);
+    h.run_steps(4);
+    h.key_press_modifiers(Modifiers::COMMAND, Key::L);
+    h.run_steps(6);
+    {
+        let app = h.state_mut();
+        let info = app.session.get(app.views[0].id).unwrap().info.clone();
+        app.views[0].document_replaced(&info);
+    }
+    h.run_steps(4);
+    assert!(h.state().views[0].presenting(), "still presenting after the reload");
+    h.key_press(Key::Escape);
+    h.run_steps(4);
+    let v = &h.state().views[0];
+    assert!(v.continuous() && v.fit == Fit::None && (v.zoom - 0.5).abs() < 1e-3, "the display from before comes back");
+
+    h.key_press_modifiers(Modifiers::COMMAND, Key::L);
+    h.run_steps(6);
+    let two_columns = String::from_utf8_lossy(PAGES).replace("/Type /Catalog /Pages 2 0 R", "/Type /Catalog /Pages 2 0 R /PageLayout /TwoColumnLeft");
+    h.state_mut().open_bytes("two.pdf", None, two_columns.into_bytes()).expect("opens");
+    h.run_steps(6);
+    let v = h.state().views.last().unwrap();
+    assert!(v.presenting() && v.layout == PageLayout::TwoUp && !v.continuous(), "one spread at a time");
+    h.key_press(Key::Escape);
+    h.run_steps(4);
+    let v = h.state().views.last().unwrap();
+    assert!(v.layout == PageLayout::TwoUp && v.continuous(), "the document's own two-column view comes back");
+}
+
+/// Two-page view stays a spread in full screen (#1353): both pages of the spread, fitted, and
+/// → turns the spread.
+#[test]
+fn full_screen_keeps_two_page_view_as_spreads() {
+    use pdfcraft_ui_egui::canvas::PageLayout;
+    let mut h = harness(&[("layout", "two-up")]);
+    h.run_steps(4);
+    h.key_press_modifiers(Modifiers::COMMAND, Key::L);
+    h.run_steps(6);
+    let v = &h.state().views[0];
+    assert_eq!(v.layout, PageLayout::TwoUp);
+    assert!(!v.continuous(), "one spread at a time");
+    assert!(rect(&h, 0).is_some() && rect(&h, 1).is_some() && rect(&h, 2).is_none(), "the first spread only");
+    h.key_press(Key::ArrowRight);
+    h.run_steps(4);
+    assert_eq!(h.state().views[0].current, 2, "→ turns the spread");
+    assert!(rect(&h, 2).is_some() && rect(&h, 0).is_none());
+    h.key_press(Key::Escape);
+    h.run_steps(4);
+    let v = &h.state().views[0];
+    assert!(v.continuous() && v.layout == PageLayout::TwoUp, "two-page continuous view comes back");
+}
+
+/// Review on #2070: full screen hides the tools and a click turns the page only with Select, so
+/// entering it from another tool selects Select, and leaving gives the tool back.
+#[test]
+fn full_screen_clicks_turn_pages_whatever_tool_was_on() {
+    use pdfcraft_ui_egui::QuickTool;
+    let mut h = harness(&[]);
+    h.run_steps(4);
+    h.state_mut().quick_tool = QuickTool::Hand;
+    h.key_press_modifiers(Modifiers::COMMAND, Key::L);
+    h.run_steps(6);
+    assert!(h.state().full_screen);
+    assert_eq!(h.state().quick_tool, QuickTool::Select, "Select in full screen");
+    // Entering again (a second document asking for it) keeps the tool to give back.
+    h.state_mut().apply_full_screen(true);
+    let r = rect(&h, 0).expect("page 1 on screen");
+    click_with(&mut h, r.center(), Modifiers::NONE);
+    assert_eq!(h.state().views[0].current, 1, "a click goes forward");
+    h.key_press(Key::Escape);
+    h.run_steps(4);
+    assert!(!h.state().full_screen);
+    assert_eq!(h.state().quick_tool, QuickTool::Hand, "the tool from before is back");
+}
diff --git a/docs/ui-parity.md b/docs/ui-parity.md
index e8edbae40..9f2d0fd5d 100644
--- a/docs/ui-parity.md
+++ b/docs/ui-parity.md
@@ -1,8 +1,6 @@
 # UI and interaction parity
 
-> **Last reviewed:** 2026-10-21 · **Last updated:** 2026-10-21 · **Change:** minor (M3, #3808: the Pages inspector has an independent 50–150% thumbnail size slider and buttons; selection and current-page following are retained, with headless ui.set coverage. Estimates unchanged.)
-
-> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-11 · **Change:** minor (column select #740, multi-object move #844, Shift-⌘-G #810 fixed) · **Target:** Adobe Acrobat Pro (Acrobat DC, continuous track 26.002.21931, macOS)
+> **Last reviewed:** 2026-10-21 · **Last updated:** 2026-10-21 · **Change:** minor (Pages inspector thumbnail size slider and buttons #3808; full screen presents one page at a time #1459) · **Target:** Adobe Acrobat Pro (Acrobat DC, continuous track 26.002.21931, macOS)
 
 How PdfCraft's tools, panels, shortcuts and feel compare with Acrobat Pro's current interface (the
 2023+ "new Acrobat": All tools pane on the left, quick-action toolbar, Home view). Behaviour is
@@ -33,7 +31,7 @@ No dump of Acrobat's menu tree has been diffed against the registry yet (gap 24)
 | Document tabs | yes | yes, with unsaved marker | shipped |
 | Multiple windows, drag a tab out | yes | no | planned |
 | Split window, spreadsheet split | yes | no | planned |
-| Read mode, full screen | yes | yes | shipped; presentation options planned |
+| Read mode, full screen | yes | yes; full screen is one fitted page at a time on black, click/keys turn pages (#1459) | shipped; auto-advance, loop and transitions planned |
 | Light, dark, system theme | yes | yes | shipped |
 | Side panels: thumbnails, bookmarks, attachments, layers, comments, fields, signatures | yes | yes; panels keep their width (#704); the Pages inspector has a 50–150% thumbnail size slider and buttons (#3808) | shipped |
 | Destinations, articles, model tree, Tags, Order, Content panels | yes | no | planned |
@@ -84,5 +82,6 @@ No dump of Acrobat's menu tree has been diffed against the registry yet (gap 24)
 | Date | Change | Summary |
 |---|---|---|
 | 2026-10-21 | minor | Pages inspector thumbnail sizing (#3808), separate from page and Organize zoom; view setting retained on reload and exposed through UI control. Not persisted between sessions. |
+| 2026-10-14 | minor | Full screen shows one fitted page (or spread) at a time on black with click and key paging, as Acrobat's Full Screen Mode (#379, #1459, #1353) |
 | 2026-10-11 | minor | Column select shipped (#740, PR #765); several objects move together on one page (#844, PR #907); Shift-⌘-G goes back (#810, PR #835) |
 | 2026-10-10 | major | Created from the command registry, automation tools, the View area of the checklist and open UI issues |
diff --git a/parity/acrobat-features.toml b/parity/acrobat-features.toml
index 891a6c7bc..9f30f44a8 100644
--- a/parity/acrobat-features.toml
+++ b/parity/acrobat-features.toml
@@ -1106,8 +1106,8 @@ milestone = "M3"
 status = "shipped"
 commands = ["view.full_screen"]
 tools = []
-evidence = ["crates/ui-egui/tests/commands.rs::full_screen_toggles_by_shortcut_and_command_and_escape_leaves"]
-notes = ""
+evidence = ["crates/ui-egui/tests/commands.rs::full_screen_toggles_by_shortcut_and_command_and_escape_leaves", "crates/ui-egui/tests/view.rs::full_screen_shows_one_fitted_page_and_clicks_turn_it", "crates/ui-egui/tests/view.rs::full_screen_keeps_two_page_view_as_spreads"]
+notes = "Acrobat's Full Screen Mode (#1459): the page on black and nothing else, one page at a time fitted to the screen (one spread when two-page view was on, #1353), from the current page; a click, Space, Enter, \u2192 or Page Down go forward, a shift-click, Backspace, \u2190 or Page Up back, Home/End to the ends; Esc or \u2318L bring the display from before back at the page reached. Links still open on click. Missing: the cursor is not hidden, no transitions, auto-advance or loop (view.full-screen-presentation), and no full-screen preferences such as the background colour"
 
 [[feature]]
 id = "view.full-screen-presentation"
@@ -1115,11 +1115,11 @@ title = "Full-screen presentation options (auto-advance, loop, click to advance)
 area = "B"
 tier = "P2"
 milestone = "M12"
-status = "planned"
-commands = []
+status = "partial"
+commands = ["view.full_screen"]
 tools = []
-evidence = []
-notes = ""
+evidence = ["crates/ui-egui/tests/view.rs::full_screen_shows_one_fitted_page_and_clicks_turn_it"]
+notes = "Click to advance (and shift-click back) ships with view.full-screen; auto-advance every N seconds, loop after the last page, page transitions and the full-screen preferences are not done"
 
 [[feature]]
 id = "view.reflow"