Resolved against rb-base-36: Scanned keeps the base's rewrite flag next to magic and tag; Exif keeps the Panasonic lens fallback; locale catalogs merged (one duplicate key dropped).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Catalog format v9 adds Photo.preview_checked and Op::SetContent.preview_checked:
the app version (CARGO_PKG_VERSION) whose decoder set preview_only, empty when
it isn't set. Import and content_op (Reload, Relink) stamp it; undo swaps it
back. Catalogs from before v9 read an empty stamp, so their preview-only photos
count as stale (Photo::preview_only_stale) and will be rechecked once.
The version guard test now also accepts a format version that only adds fields.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Read the autofocus point from Sony maker notes (FocusLocation 0x2027, FocusFrameSize
0x2037, FocusMode 0x201b, AFAreaModeSetting 0x201c, AFTracking 0x2021 and the area mode
used from the enciphered 0x9402 block), for the ILCE-1 and ILCE-7SM3, whose layout was
checked against ExifTool's output on 333 real ARWs. Manual focus, centre-only Multi
reports and unchecked bodies give no point. The box is stored on the upright photo as
Meta.focus (omitted when unknown; no catalog format change), filled at import and by
Reload from Disk.
View > Show Focus Point (Alt+F) draws it in Detail, Compare and Survey through rotation
and crop; View > Zoom to Focus Point (on by default) makes Toggle Zoom centre on it; the
Info panel shows "AF-C · Wide · Animal Eye Tracking". photo.inspect returns meta.focus.
Held-out and library-wide calibrate runs on real CR3s (calibrate's CR3 /
CR2 input is #1073): profiles change little (R7 2.52 -> 2.57, R6 Mark II
6.12 -> 6.09 mean dE), so none is bundled; notes the CRX adaptive QP
172/175 files that stay preview-only. The catalog test pins that an EOS
R6 Mark II (Exif "Canon EOS R6m2") edits in Kelvin through its measured
matrices and an EOS R7 stays relative.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CzWyUn77ZWLe3q3qMiQbVt
Sony ARWs of cameras without measured colour matrices were edited on the
relative scale (6500 K / 0 = as shot). Their SR2SubIFD stores the
multipliers of the camera's presets at 2500, 3200, 4500, 6000 and 8500 K;
lightcraft_raw::kelvin_presets reads the as-shot multipliers on the curve
through them and they take the spectral matrices' place in the #730
design (as-shot Kelvin and tint only; look, Bradford adaptation and the
pixel-identical legacy upgrade unchanged).
Covered: ILCA-99M2, ILCA-77M2, SLT-A33, DSC-RX10, ILCE-3500, ILCE-7S.
Kelvin-dial shots read back 3400 -> 3396, 5200 -> 5193, 4700 -> 4708,
5600 -> 5594 K; Shade 7493 K. Off-curve constants (isotherm tilt 0.74,
tint spacing 1) measured from the 14 Sony bodies with both spectral
matrices and presets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Go to History Step (and new Previous/Next History Step commands) loads the
step's settings and moves a per-photo cursor (`Photo.history_cursor`,
`Op::SetHistoryCursor`, catalog format v8; older catalogs open at the latest
step) instead of appending "History: …". Later steps stay listed, greyed in
the History panel, and can be returned to; a new edit made behind the end
drops them first. Each move is one undo step; undoing an edit restores the
dropped steps and the cursor. `history.list` returns `cursor`.
Also: spots.rs uses as_chunks (clippy chunks_exact_to_as_chunks).
Sources: own design (Lightroom Classic / Photoshop History panel behaviour, observed).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Sources: TIFF 6.0 and own black-box analysis of the three CC0 samples;
white-balance estimate from the embedded preview: own design.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Raws without matrices in the file (ARW, NEF, RW2, RAF, CR2, CR3, PEF, SRW,
ORF) were all edited on the relative white-balance scale (6500 K / 0 = as
shot), even when lightcraft_raw::spectral has measured matrices for the
camera. Those 52 bodies (ILCE-7M3, ILCE-7M4, D850, EOS 5D Mark III...) now
edit in Kelvin like a DNG and like Lightroom.
Design:
- One decision on both sides: spectral::find_camera("Make Model") backs
catalog::relative_wb_camera (Photo::relative_wb); files::WbScaleOf decides
the same from the decoded file. A corpus test asserts they agree.
Photo::fitted_look keeps the old predicate for smart previews.
- The matrices only convert: As Shot is the file's multipliers read through
the model's ColorMatrix1/2 (spectral::as_shot_white_through). The look
(JPEG fit / profile / spectral fallback) is unchanged, and the slider
adapts from that white with Bradford. The camera-space rebalance stays
reserved for files with their own matrices.
- Presets resolve to their Kelvin values (WbMode::preset, sources cited).
- The Color panel shows the white balance in effect (effective_wb).
- XMP: crs::Target::for_file takes the camera; matrix cameras read
crs:Temperature as Kelvin (marked "scale": "kelvin"), others keep the
#510 as-shot shift.
Migration (no look changes):
- WhiteBalance.scale: WbScale { Legacy (absent in JSON), Kelvin }. A
white balance without a scale keeps its old meaning. On a spectral-Kelvin
raw (SourceInfo.legacy_relative_wb) the pipeline composes the old
adaptation (6500 -> value) with the new one (as shot -> ...) in Bradford
cone space (local::legacy_white). Von Kries scalings compose exactly, so
the matrix matches to f32 and the pixels are identical
(pipeline legacy_relative_white_balance_renders_as_before_on_a_kelvin_raw,
media old_relative_white_balance_on_a_kelvin_camera_keeps_its_look...).
- Every white-balance writer (develop.set/adjust/quickAdjust/wb/wbPick/
reset) first runs local::normalize_wb: a legacy value becomes the Custom
Kelvin value with the same look and is marked Kelvin. Partials without a
scale (old presets, develop.merge) stay legacy.
- Catalog format 7: Op::SetAsShotWb replaces the 6500/0 as-shot recorded
by older imports when the file is next decoded or reloaded (system op,
not an undo step). Format-version test updated.
- The web wire carries legacy_relative_wb.
Docs: parity (LR-EDIT-COLOR-TEMP), camera-preview-colour, xmp-interop,
lightroom-catalog-import, control-protocol, mcp, whats-new.
The ORF decoder supplies the as-shot white balance (ImageProcessing
WB_RBLevels) and no colour matrix, like ARW, NEF, RW2, RAF, CR2/CR3, PEF
and SRW, but ORF was left out of camera_preview::file_local_look and the
catalog's relative_wb, so it rendered with the neutral fallback matrix:
flat, grey and dark. It now gets the same guarded fit to its camera JPEG
and white balance relative to the as-shot look. Corpus (held-out RMS
against the fallback, all accepted): E-1 0.126 -> 0.014, E-400 0.087 ->
0.022, XZ-2 0.061 -> 0.023; compressed ORFs still open from their preview.
Against Lightroom Classic (CC0 E-1 kit, 2000 px, ΔE00): unedited render
11.25 -> 8.30; mean over 86 variants abs 12.10 -> 9.48, effect 3.44 ->
2.80. Every other kit's unedited render is byte-identical.
RENDER_CACHE_VERSION 23.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Custom white balance from a Lightroom catalog or XMP sidecar was taken as absolute Kelvin for every
raw. Raws LightCraft develops relative to their as-shot look (ARW, NEF, RW2, RAF, CR3, CR2, PEF; 6500 K
means as shot) then read a small tweak as a large blue shift: ΔE 22 against Lightroom's export on the
photos of issue #510.
The crs mapper now takes a `Target` (preset, rendered, raw with a measured illuminant, relative-WB raw)
instead of a bool. For relative-WB raws, and rendered files with only `Temperature`, a Kelvin value is
converted to the same mired shift from the packet's `AsShotTemperature` / `AsShotTint`. Without that
reference (Lightroom catalogs keep none for Custom photos) the photo stays As Shot and the import
report lists `Temperature, Tint` as not carried over. Import, sidecar read and catalog import decide
the target the same way through `lightcraft_catalog::relative_wb_format`.
Tests: shift from the issue's numbers (3650 → 3578 K lands at ~6275 K), the As Shot fallback with its
report entry, target selection per file, and the catalog mapper's Custom-WB case.
Each photo's develop settings record the rendering process they are
interpreted by (`DevelopSettings::process`). There is one process, V1, the
pipeline as it is; nothing renders differently (180 CPU 8/16-bit and GPU
renders of procedural scenes, and the saved settings JSON and hash64, are
byte-identical to main).
Settings saved without the field load as V1 (a field-level serde default),
new settings get the latest (`Default`), and V1 is left out when saving, so
files and preview-cache keys stay as they were. A damaged value (anything
but a whole number up to 2^32 - 1) reads as V1 too, so it never costs the
rest of the settings (an unparsable `lc:settings` sidecar is ignored). Reset moves a photo to the
latest process, section and slider resets don't; virtual copies inherit
it; copy / paste / sync / Auto Sync / presets don't carry it; a number from
a newer LightCraft is kept and renders with the newest known process. The
process is not an edit (Edited badges, import-look checks). The base tone
map is chosen per process in one place (`finish::base_tone`, shared by CPU
and GPU). Photo > Update to Current Process (`develop.updateProcess`) moves
selected photos on an older process to the latest as one undo step. Its
menu enablement follows the selection; a call that names photos (`ids` /
`id`) is validated on those instead, through a new opt-in
`CommandSpec::explicit_targets` (execute checks enablement before the
handler sees `ids`). `develop.get` reports the process. The rule and how to add V2:
docs/process-versions.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
From review: `.hidden` reported the extension "hidden", so it matched
"File Extension is hidden". A name whose only dot leads has no extension
now. Photo::is_cropped uses the existing CropGeometry::is_identity
instead of comparing against a default crop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New smart-album fields, each in its menu group:
- Source: Copy Name, In a Stack
- File: File Extension (case and leading dot ignored), Video Duration
- Description: Alt Text
- Location: City, State / Province, Country (Location still matches all)
- Size: Long Edge, Short Edge, Aspect Ratio (landscape / portrait /
square within 1 %), measured on the photo as shown (oriented and
cropped)
- Develop: Cropped (crop or straighten), Treatment (color / monochrome)
Photo::extension, Photo::shown_size and Photo::is_cropped hold the
domain rules. A crop rectangle that is NaN or outside the frame is
clamped, so hostile settings can't produce NaN sizes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Camera Info gains Shutter Speed, compared in seconds and written as the
camera shows it: "≤ 1/60" finds faster exposures, "between 1/1000 and
1/125" works, and a value that isn't a time matches nothing. The editor
takes it as text (1/250, 0.5, 2").
The shutter parser moves from engine export into the catalog
(parse_shutter_seconds) so export and the rule share it. A new
rules-editor test checks that every field × operator default value
makes a valid rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Smart albums can test how many keywords a photo has ("2 or more", "2 or
fewer", "exactly 2" via the number operators), who is in it (People: the
names on face regions, with the keyword operators) and how many people.
Photo::keyword_count counts a hierarchical keyword once and ignores case
and blank entries; Photo::people is the domain rule for "people in a
photo" (named face regions, trimmed, case-insensitive, pets and unnamed
faces excluded), now shared by the existing person filter. Keyword and
people rules share one name-list matcher.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Samsung SRW raws whose raw IFD (private compression 32769 or 32770) stores the samples uncompressed are decoded from the sensor data: 12-bit samples packed two in three bytes (bit order told apart from the samples; NX5, NX10, NX11 and NX20, NX200, NX210, NX1000, NX1100) and 16-bit little-endian words (EX1, WB2000). CFA layout from the raw IFD's CFAPattern; framing, white balance, black and saturation levels from the maker note (value offsets relative to the note; the vectors are stored offset by its EncryptionKey); a one-direction Exif picture size crops to the centre of the framing; black from dark rows or columns when the file states none; saturation plateau below the stated level wins. Compressed codings (32770 with fewer bytes, 32772, 32773) stay preview only with that reason. srw is imported from folders; SRW takes the file-local camera look. RENDER_CACHE_VERSION 17.
Album.order and Op::SetAlbumOrder; album_children lists folders first, then
by place, then by name. Moving an album drops its place and undo restores it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
CR2 and PEF decode without a camera colour matrix, like ARW, NEF, RW2,
RAF and CR3, but camera_preview::file_local_look (and the catalog's
relative white balance) left them out, so they rendered with the neutral
fallback matrix: the camera preview showed first, then a flat,
desaturated render replaced it. They now use the same guarded fit and
relative WB; a fit that fails the gates keeps the fallback, so a file can
only stay as it was or move closer to its camera JPEG. Not measured on
the corpus here (raw.pixls.us is blocked from this environment).
RENDER_CACHE_VERSION 15 re-renders cached CR2/PEF thumbnails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01912WaK6Rmew3wxZuPyX7E8
Decode lossless CRX and version 0x100/0x200 C-RAW in portable Rust,
including sensor geometry, timed white balance and black/white levels.
Verify all sensor samples against six independent M50/R100/R8 references.
Any CR3 decode error falls back to the embedded JPEG, as CR3 files did
before this decoder. The full sensor buffer is allocated only after the
first plane decodes, and plane buffers grow row by row. Tile planes
decode in parallel with a windowed bit reader (24 MP: 424 -> 89 ms
lossless, 519 -> 138 ms C-RAW on an M4).
Add guarded CR3 camera-JPEG colour fitting with independent framing
validation, relative white balance and cache invalidation.
Validation: cargo xtask ci.
RW2 / RWL / RAW join ARW and NEF: the starting look (matrix, hue/saturation table, tone and chroma curves) is
fitted to the file's own embedded JPEG behind the same gates, with white balance relative to the as-shot look.
Panasonic previews always show the whole active area while the default crop is the in-camera aspect ratio, so when
the preview matches the active area instead of the crop, the reference is cropped to the default crop before
fitting (corpus_rw2_with_an_in_camera_crop_gets_a_camera_look).
On 174 CC0 samples with a preview 140 fits are accepted (93 of the 114 bodies with a preview), median ΔE against
the camera JPEG 5.0 with matching lightness; most of the others are compacts and kit zooms whose camera JPEG is
distortion-corrected (tag 0x0119 isn't used yet). `lightcraft-cli calibrate` keeps collecting ARW and NEF only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QtQmZ6peZXGn3wiqeowV2v
LightCraft has no colour matrix for Nikon cameras. Because of this, NEF
files showed colours that were too gray and too green.
- Colour: LightCraft now calculates a colour matrix and a tone curve from
the JPEG preview in each NEF file. Sony ARW files use the same
procedure and the same quality checks. White balance is relative to
the as-shot look, as for ARW files.
- One function, camera_preview::file_local_look, selects the formats for
the fit and for the relative white balance. Photo::relative_wb in the
catalog uses the same formats.
- Black level: Nikon stores the black level (maker note 0x003d) in
14-bit units, also in 12-bit files. The decoder read it as a 12-bit
value. Because of this, 12-bit files from the D750, D780, D850, D7500
and Z 50 were too dark. Now the decoder divides the value by 4 for
12-bit files.
- The corpus gets the D7500 12-bit and 14-bit lossless samples. A test
compares their levels. The render cache version increases to 9.
Results on 13 NEF files that LightCraft can decode: LightCraft accepted
the fit for all 13 files. The mean colour difference from the camera
JPEG (CIE76 dE) decreased from 13-46 to 2.9-7.8. One file with mixed
light improved by a small quantity only (12.7 to 12.0).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Threads the Vec<Region> that lightcraft-meta already reads from XMP
(MWG-RS) through to the screen, so it's no longer inert:
- catalog::Meta gains a `regions` field (catalog now depends on
lightcraft-meta, which doesn't depend back on catalog, so no cycle).
- crates/engine/src/files.rs (meta_of) and src/sidecar.rs (parse_sidecar
/ merge_into) populate it for both embedded-XMP and external-sidecar
photos, mirroring how `keywords` is already handled.
- ui-egui's loupe view (panels/detail.rs) draws each region as a
rectangle over the photo via the existing CanvasMap, color-coded by
kind (Face/Pet/other) with its name label if present, right alongside
the existing info overlay. Read-only, no new interaction.
New end-to-end test (regions_from_sidecar_are_read_on_import) covers a
region written to a sidecar reaching Photo.meta.regions through real
import, not just the parser. cargo xtask ci green (fmt, clippy -D warnings, test, parity, layers, assets, wasm).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Local browse records can be most of a large catalog (85k photos, 90 %
Local: 313.5 MB snapshot). Untouched Local records of folders whose last
browse is older than library.preferences forgetLocalDays (default 30,
0 = never) are now removed from the catalog when the library opens (and by
library.forgetLocal {dryRun?, days?}), as journaled, non-undoable ops, then
compacted in the background. Files and XMP sidecars are never touched;
browsing the folder again catalogues them afresh.
Untouched = a Local file record, not deleted, not a virtual copy, whose
state still hashes to the fingerprint taken when the browse catalogued it
(any change keeps it); records from before fingerprints need every
user-editable field empty/default. Kept too: records in albums (or as
cover), stacks, sources of virtual copies, visible/selected/edited ones,
ones referenced by undo/redo, ones with a smart preview.
Per-folder last-browsed times live in the catalog (Op::SetBrowsed,
normalised with folder_key; re-stamped at most hourly). Old catalogs load
unchanged; folders without a time are stamped now, so nothing is forgotten
on the first open after the upgrade.
persist_bench (85k photos, 76.5k Local, every 7th folder recent, 1 in 50
rated): 63.8k forgotten, plan 162 ms, snapshot 313.5 MB -> 94.9 MB.
Settings -> Performance -> Local folders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Catalog Meta gets copyright_status (unknown / copyrighted / publicDomain), usage_terms and
copyright_url, read and written as XMP Rights Management fields (xmpRights:Marked, UsageTerms,
WebStatement) on import, sidecars and exports (kept by "copyright only"). photo.setMeta,
copy/paste metadata, metadata presets, a Copyright Status smart-album rule and the Info panel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Raw variants the decoder can't read yet (e.g. Nikon Huffman-compressed NEF
from a D3200/D5100) silently fell back to the camera's embedded JPEG, so
users edited a JPEG with the camera's picture style (e.g. Monochrome) baked
in without being told.
- catalog: Photo.preview_only (serde default; old catalogs load), set /
cleared by Op::SetContent with an exact inverse; Photo::develops_raw().
- engine: ProbeInfo.preview_only carries the decoder's Unsupported reason
into import, the import review (previewOnly) and catalog.query
(previewOnly); photo.inspect includes it. photo.reload and photo.relink
re-probe and clear/set it when the file decodes (or not) now.
- source_info: a preview-only raw is a rendered source (relative WB scale,
display tone curve) instead of raw:true/5500 K + filmic tone map on a
display-referred JPEG; import uses the JPEG default preset for it; the
Edit panel shows the rendered-file WB sliders.
- UI: "Preview" badge on grid thumbnails, a pill on the loupe, a notice in
Edit and Info (amber caution token, Info icon drawn in code).
- Tests: catalog serde/undo, engine import -> reopen -> reload/relink,
headless UI badge/notice widgets.
Refs #10
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
lightcraft-pipeline cull.rs: focus (Laplacian energy of the sharpest 16-px blocks at 512 px,
0–100, calibrated on the CC0 corpus), clipping share and an 8×8 look-alike signature.
photo.analyze scores the selection (else the view), groups look-alike shots taken within 10 s
into bursts and marks each burst's sharpest; optionally rejects photos below a focus score and
picks each burst's best (one undo step). Scores live on the photo (Analysis, Op::SetAnalysis):
rule fields Focus and Best of Similar Shots, Info panel line. Photo ▸ Assisted Culling….
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Albums gain a `quick` flag: the Quick Collection is created the first time B adds to it.
album.toggleTarget adds the selection to the target album (the Quick Collection unless
album.setTarget names another regular album) or removes it when all of it is already there;
album.clearQuick empties it. B in the photo / square grids does this (with a toast); in the
loupe and edit views B stays the masking brush. Album menu: Set as Target Album / Stop Using
as Target Album / Clear Quick Collection; the target is marked + in the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- library.browse {path, subfolders}: a folder's photos are read in place as "local" photos
(catalog flag, SetLocal op) that only folder views list — not All Photos, albums, date
groups, keyword counts or stats. photo.addToLibrary promotes them; importing the folder for
real promotes instead of reporting duplicates. The browsed folder persists with the view.
- UI: Local section (Pictures, Desktop, Downloads, Home, the browsed folder, Browse Folder…);
folder views get a breadcrumb header (each part opens that folder), Include subfolders and
"Add N to My Photos".
- Renderer: a job that fails (unreadable / missing file) is remembered by slot + key and not
requested again every frame — the grid re-queued it forever (a render loop per broken
file). The loupe says "This photo can't be opened" with the reason; grid cells show "!".
ui.inspect lists pending render slots.
- Headless app.export (MCP, lightcraft-cli run) exports the selection like the desktop app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Metadata gains alt text, extended description, sublocation, city, state/province, country:
catalog, photo.setMeta, copy/paste metadata, XMP read/write (Iptc4xmpCore AltText /
ExtDescrAccessibility / Location, photoshop City / State / Country), sidecars and export
(place fields dropped with "remove location").
- Info panel: camera card (camera, lens, size · file size, format badge, focal length,
shutter, aperture, ISO), then title, caption, alt text, extended description, copyright,
creator, file name (rename), file path (reveal), captured (edit), place fields, GPS.
- Text fields keep what is typed across frames and save on focus loss (they were rebound to
the stored value every frame). New pencil icon (drawn in code); dates::display_time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Settings (Cmd+, / app menu on macOS, Edit elsewhere) with General, Import,
Performance and Interface tabs. App settings (startup view, delete
confirmation, GPU, preview size, filmstrip/grid badges, last library) live in
UiState.settings (ui.json); library settings (raw / non-raw / per-camera
import presets, XMP, thumbnail cache size) go through library.preferences into
prefs.json. Import applies the matching default preset; the photo remembers it
as its import look (unedited; Reset returns to it). Open Library… switches
libraries at runtime.
View modes: F full-screen preview (photo on black, arrows step, I cycles the
info overlay, Esc exits), Cmd+Shift+F window full screen, Cmd+I cycles the
loupe info overlay (off / file + date / exposure), Navigator mini map while
zoomed (click/drag pans).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Resolved: album.create (main's one-liner + smart: None), menus (panels in
the Window menu, main's dialog.newFolder ⇧⌘N, app.showInFinder and
app.exportPrevious placed in the menu layout), shortcuts (native-menu skip
+ main's aliases and UI-over-engine rule; Shift+X/Shift+U aliases go
through the culling path; my Shift+P/X/U flag-and-advance dropped in
favour of the aliases). X and Delete stay egui-handled (contextual keys).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Photo.copy_of / copy_name. photo.virtualCopy (Cmd+') clones the photo with
independent settings and history, names it "Copy N" (numbered per master),
adds it to the original's albums and stacks it (expanded) right after the
original; one undo step for several copies (Session::merge_undo). Copies
never write XMP sidecars. "Copy N" badge in the grid, Info panel line,
copy:yes search token. Also: Info panel stars laid out in a row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stack entity in the catalog (AddStack/RemoveStack/SetStack ops with
inverses, validation, snapshot + journal replay property test). Helpers
build ops for group (merging stacks), ungroup, remove, set top, collapse,
and stack_with_ops() for future merge results. Views arrange stack members
together and collapse to the top. Commands stack.* (Cmd+G, Cmd+Shift+G, S,
Shift+S, expand/collapse all, stack.auto with preview); grid/filmstrip
count badges (click to toggle), context menu, Auto-Stack dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Album.smart holds Filter rules (rating, flag, label, kind, edited, keyword,
camera, lens, capture date range, text, album); SetAlbumRules op with
inverse, validation (no nested smart albums, no deleted), journal replay
property test. album.createSmart (from the current view or explicit rules),
album.setRules; New Smart Album dialog, smart icon, live counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
