MediaCache::enforce_budget never evicts the original of the photo on screen (set_on_screen), but it still
counted it. A 64 MP original (Sony A7R VI: 9984×6656 linear float, 760 MiB) nearly fills the default cache
share (768 MiB) alone, so the loop evicted everything else instead: the photo's preview and thumbnail sources,
the rendered previews and the prefetched neighbours. Every edit at 1:1 (the whole-frame render and the
thumbnail), every zoom out and every step to the next photo then decoded the raw again.
The pinned original is now left out of what is compared with the budget. The rest still fits the share; the
original sits over it, as the first commit of this PR already allowed.
Co-Authored-By: Claude <noreply@anthropic.com>
Each drag tick changed the edited photo's settings, so the filmstrip asked
for a new thumbnail render every frame. For an unedited raw shown with its
embedded preview, the thumbnail-level source had never been decoded, so each
of those renders decoded the whole raw (a 64 MP ARW: over a second), several
side by side, and the loupe's drafts queued behind them.
- The edited photo's thumbnail is not re-rendered during a slider drag while
it has one; it follows once the drag ends.
- A thumbnail of a photo whose preview-level source is decoded (the one in
the loupe) is cut from that source (SourceRef::Fit) instead of decoding the
file again; not when the photo has a denoised picture.
Co-Authored-By: Claude <noreply@anthropic.com>
Sony ARWs of cameras without measured colour matrices were edited on the
relative scale (6500 K / 0 = as shot). Their SR2SubIFD stores the
multipliers of the camera's presets at 2500, 3200, 4500, 6000 and 8500 K;
lightcraft_raw::kelvin_presets reads the as-shot multipliers on the curve
through them and they take the spectral matrices' place in the #730
design (as-shot Kelvin and tint only; look, Bradford adaptation and the
pixel-identical legacy upgrade unchanged).
Covered: ILCA-99M2, ILCA-77M2, SLT-A33, DSC-RX10, ILCE-3500, ILCE-7S.
Kelvin-dial shots read back 3400 -> 3396, 5200 -> 5193, 4700 -> 4708,
5600 -> 5594 K; Shade 7493 K. Off-curve constants (isotherm tilt 0.74,
tint spacing 1) measured from the 14 Sony bodies with both spectral
matrices and presets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add correlated dark holdouts that reject misleading training and accept
matching training. Check finite, monotone curves in both cases. Confirm
the regression fails with the error gate removed and passes when restored.
Qualify the improvement claim when no original curve can be fitted, and
explain the source-look process policy and offline smart preview refresh.
Co-Authored-By: Codex <noreply@openai.com>
Use separate luminance pairs for tone fitting so the camera look follows
its JPEG into deep shadows. Keep colour pairs and holdouts unchanged.
Require enough correlated shadow samples and lower held-out error, with
noise and compression floors and the existing median curve fit.
Add synthetic regressions, bump look and render cache versions, and
record the public multi-make and private numeric validation in the docs.
Fixes#1307
Co-Authored-By: Codex <noreply@openai.com>
Resize::apply rounds the size, then the render fit the frame into that box
again: on a frame a hair under 3:2 the refit gave 1333 x 1.4999999 = 1999.49
and lost a pixel of the long edge. Frame::fit now keeps a box that already has
the frame's aspect up to rounding, and output_size rounds the native size to
whole pixels first so float noise can't decide a half-pixel tie.
An uncompressed Leaf Aptus 22 MOS keeps its 16-bit mosaic in IFD0
(compression 1, BlackIsZero, one sample per pixel) with no Make tag and
no CFA photometric, so `probe` returned None and the file imported as a
greyscale image of the mosaic. Leaf's data block, tag 0x8606 (LeafData
in the ExifTool EXIF tag-name documentation), now marks such an IFD0 as
a raw: OtherTiff, preview only with the reason, as the lossless-JPEG MOS
already is. A rendered RGB image that kept the block stays an image.
The Hasselblad Lunar is a Sony NEX-7 that writes an ARW under Make
HASSELBLAD; only SONY files reached the ARW reader, so it opened as its
preview. A HASSELBLAD file with Sony's raw coding (an IFD with
compression 32767 or the tone-curve tag 0x7010, which no 3FR / FFF has)
now goes there and decodes like a NEX-7: black 512, the SR2SubIFD white
balance. The Tag2010 white-balance fallback, the one table arw.rs keys
by model, takes the body from the maker note's SonyModelID (0xb001)
when the file is not Sony-branded.
Docs: the Lunar is verified in docs/raw/evidence.tsv (236 verified),
raw-parity.md, parity-checklist.md, gaps.md and whats-new.md.
RENDER_CACHE_VERSION 61 -> 62: a Lunar's thumbnails were rendered from
its preview.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
library.up / library.down (Up / Down) go to the cell above / below in the
grids (nearest by position in justified rows; the top / bottom row stays
put), and step one photo in the filmstrip.
Sources: own design.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Go to History Step (and new Previous/Next History Step commands) loads the
step's settings and moves a per-photo cursor (`Photo.history_cursor`,
`Op::SetHistoryCursor`, catalog format v8; older catalogs open at the latest
step) instead of appending "History: …". Later steps stay listed, greyed in
the History panel, and can be returned to; a new edit made behind the end
drops them first. Each move is one undo step; undoing an edit restores the
dropped steps and the cursor. `history.list` returns `cursor`.
Also: spots.rs uses as_chunks (clippy chunks_exact_to_as_chunks).
Sources: own design (Lightroom Classic / Photoshop History panel behaviour, observed).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A decoded 64 MP original (Sony A7R VI: 9984×6656 linear float, 797 MB) is bigger than the
default cache share (half of 1.5 GiB). MediaCache::enforce_budget evicted it as soon as the
render handed it over, so every pan of a 1:1 view and every slider move while zoomed decoded
the raw again (and lost the shared GPU copy, keyed by the CPU Arc).
The frontend now tells the cache which photo Detail shows (MediaCache::set_on_screen, set per
frame in panels::compare::prepare); that photo's original is not evicted for the budget and is
let go as soon as another photo or view is shown. Keying it on "no newer preview of another
photo" instead does not work: the neighbour prefetch stores previews after the original.
The decoders keep the alpha plane, but to_working converted only the
colour, so transparent pixels kept the black most encoders store under
them: renders, previews, exports and contact sheets showed it. The
working image is now flattened onto white, in linear light like the
rest of the pipeline.
- Files with no capture date in their metadata or sidecar (e.g. exports saved without
metadata) take the file's modification time, as Lightroom does, instead of all landing
under "Unknown Date" (the loupe overlay showed the import date for them). The import
review and its folder/rename templates use the same date.
- The import review counted files with the same bytes as another file in the source as
"already in the library" (8 on a brand-new, empty library); they are now shown apart as
"identical copies".
- View > Grid Info captions are drawn on Square Grid only; choosing one from Photo Grid now
switches to Square Grid instead of seeming to do nothing.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With XMP auto-write on, photo.readMetadataFromFile committed what it read
and the command handler then wrote the sidecar back, adding lc:settings to
a sidecar that had only another app's crs: settings. Later reads prefer
lc:settings, so LRTimelapse's next crs: edits were ignored. The read now
sets the existing one-command skip_auto_write switch (as photo.removeRegion
does); edits made afterwards are still auto-written.
Tests: a read leaves the sidecar byte for byte and a later develop edit is
still written; the issue's crs:Exposure2012 0.5 -> 1.2 round trip is read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A panic inside RenderJob::run or QuickJob::run (a raw decoder or pipeline bug) unwound the
job pool's worker without sending a result. The slot stayed pending and its key was never
asked for again, so the loupe or the thumbnail rendered forever; and the pool never
replaces a dead worker, so after as many such panics as it has workers (2–6) no photo
rendered until LightCraft was restarted.
Both now catch the panic (guard::catch) and return it as the job's failure, answering the
request it came from, so the renderer records it like any failed render: no retry until
the catalog changes, and the workers live on. run() is the one place every render goes
through (the pool, export, Build Previews, contact sheets, face and AI-mask workers);
callers that had their own guard keep working, and the watermark preview's, now
redundant, is gone. The web build aborts on panic, so nothing changes there.
Co-Authored-By: Claude <noreply@anthropic.com>
A lensfun profile is scaled by the crop factor of the recorded frame. `lookup` took the body's from the
database whenever the camera was in it, so a full-frame body shooting a crop of its sensor (APS-C /
Super 35 mode, or switched there by an APS-C lens) had the profile applied as if the crop were the full
frame: the crop's corners got the full frame's corner distortion and vignetting. On a Sony ILCE-1M2 in
APS-C mode with the FE 100-400mm F4.5-5.6 GM OSS at 400 mm, the warp's r³ coefficient was the full
frame's 0.0215 instead of 0.0096.
The 35 mm equivalent focal length shows the crop: when it implies a crop factor more than 10 % above the
body's, that wins (`frame_crop_factor`); within 10 % the difference is the tag's whole-millimetre
rounding and the body's value stands. Without the body in the database the 35 mm equivalent is used, as
before.
Tests: `in_camera_crop_mode_uses_the_frames_crop_factor` (fails on main: in its profile the APS-C frame's
vignetting gain is 0.40 instead of 0.18) covers APS-C mode, full frame, a 35 mm equivalent rounded by a
millimetre, no body in the database and a hostile focal length. Checked on 19 private ILCE-1M2 ARWs
(FE 100-400mm GM, Sigma 24-70mm F2.8 DG DN | Art, full frame and APS-C, firmware 2.01-4.00): every
APS-C coefficient is the full-frame one scaled by 1/1.5².
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Photo Merge decoded each raw itself and wrote the reference frame's own colour
tags into the merged DNG. A CR2 (and NEF, ARW and the other raws whose colour is
fitted from the camera JPEG) has none, so an HDR merge of CR2s rendered with no
camera colour: green and about 16 L* dark.
`lightcraft_merge::load_frame_with` takes the raw's colour tags from the caller,
and the engine passes `starting_colour_tags`: the colour the raw opens with
(`starting_colour`) as DNG tags. That is one forward matrix with a colour matrix
and AsShotNeutral that agree with it at the as-shot white, the look's hue/sat
table as ProfileHueSatMap and its tone curve as ProfileToneCurve. Raws with
their own matrices (DNG) keep their tags. The look's chroma curve has no DNG
tag and is left out.
On two CC0 CR2s (EOS 550D, 40D) an HDR merge of three copies against the photo
alone: mean CIE76 dE 26.15 -> 1.07 and 22.89 -> 0.47.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts in crates/ui-egui/src/lightroom_import.rs: main moved the
Lightroom import's progress from its own window to the shared activity
stack, and this branch had added a second bar to that window.
Resolved by keeping main's activity row and feeding it this branch's
step-by-step progress (LightroomProgress): the row counts the step under
way (the catalog, reading the photos, adding them) and names it, so it
moves while the photos are read. The progress window stays removed; the
whole-import fraction is still in the task's status.
The engine half of this branch merged without conflict and is what main
still lacks: reading the photos is counted, and Cancel stops it.
main's two activity tests now drive the task through LightroomProgress.
"Reading photos…" and "Adding photos…" are added to the language
catalogs, cut from the existing "… N of M" translations.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New export format `rendereddng` (export dialog: Format DNG, "DNG of: Rendered
photo"; `app.export`; MCP export tool): the rendered photo, with the edit,
crop, size, output sharpening and watermark baked in, written by the new
`lightcraft_raw::write_rendered_dng` as a LinearRaw DNG of 16-bit float Deflate
tiles in the export colour space. ColorMatrix1 (XYZ -> space), ForwardMatrix1
(space -> XYZ D50), a neutral AsShotNeutral and an identity ProfileToneCurve
make raw converters show it as rendered. HDR edits keep highlights above white.
Bad input (wrong sample count, zero or huge sizes, NaN/inf, out of half-float
range) gives an error or is clamped, never a panic.
Also fixes the Rust 1.99 clippy lint chunks_exact_to_as_chunks in
pipeline/spots.rs that fails `cargo xtask ci` on main.
Sources: Adobe DNG Specification 1.4+ (LinearRaw, ColorMatrix/ForwardMatrix,
ProfileToneCurve); own design.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The header-only path added in #755 answers for a Fuji RAF, whose preview pointer sits in the first
bytes. A Canon CR3 keeps its preview in a JPEG track, and a TIFF raw (CR2, ARW, DNG, RW2, 3FR …) can
keep its preview tag in an IFD the prefix cuts short: both fell back to `std::fs::read` of the whole
file — tens of megabytes for a JPEG of a few, on the format of the largest bucket in gaps.md (Canon,
33 % of photographers).
`preview_window` now asks `lightcraft_raw::sparse::preview_plan` — the module #961 added for the
import path, which had no production caller — which ranges `embedded_preview` reads, and reads
exactly those: `planned_preview` fills a buffer of the file's length, reads the ranges the plan names
and asks again until it says `Ready`. The buffer is the file's length, which the memory gate counted
already, and its untouched pages stay zero, so what this path costs is the bytes read — on macOS a
freed buffer of that size may sit in the allocator's cache rather than go back to the OS (measured on
a 38k-photo import, #832). The loop gives up past 60 % of the file, the bound step 2's partial read
uses, and a plan that does not fit, a file past 1 GiB or a window that does not decode all end in the
whole-file fallback.
The quick path hands the JPEG to the decoder alone, so two container facts the whole-file path applies
have to be visible in the bytes it is handed, or the file declines and the whole file keeps the
preview:
- a preview colour space of Adobe RGB (`decode_raw_preview` applies it; a JPEG-only decode has the
JPEG's own space, else sRGB). A container that says sRGB does not decline — that is what the decode
assumes anyway, and declining it took the fast path away from a real Sony ARW;
- the file's own EXIF orientation, when the preview JPEG carries none of its own: the plan's header is
a bounded 64 KiB (the header route grows its prefix to the preview's declared extent instead), and
an orientation tag it cannot see would show the preview unrotated.
Measured over the whole CC0 corpus (111 raws): 52 files take this route, reading a median 7.8 % of
their bytes (0.9-27.7 %) — RW2 3.3 %, Leica RWL 4.1 %, ARW 7.5 %, CR3 8.4 %, DNG 9.7 %, CR2 14.3 % —
while the 21 RAFs stay on the header route (median 4.5 %). The other 38 read whole: NEF, NRW, ORF, PEF
and SRW because the planner does not describe them (an SRW plans to the whole file, which the 60 %
budget then declines), plus the ARWs, CR2s, CR3s and DNGs that declare Adobe RGB or whose plan wants
more than that budget — the bytes they read are the ones the plan would have read anyway. Across all
111 files the plan handed on the same preview as the whole file, with the skipped bytes zeroed and
again 0xFF. `LIGHTCRAFT_PROFILE=1` prints
[profile] preview …/arw-sony-a7rm4a-compressed.arw: read 688128 of 61832192 bytes (plan, window 483441)
Tests: a synthetic TIFF/DNG whose preview only its tags locate (identical pixels to the whole-file
path, the CFA strip unread), the same structure without the tag that makes it a raw, a file whose
orientation only the whole file shows, and a file that states Adobe RGB against one that states sRGB;
the opt-in real-file test reports which path answered.
Co-Authored-By: DeepSeek V3.2 <noreply@deepseek.com>
20 engine tests failed on Windows on clean main. Three real bugs on
case-insensitive volumes (Windows, default macOS APFS) caused most of them:
- Renaming a photo probed `a.XMP` before `a.xmp`. On a case-insensitive
volume the upper-case spelling "exists" when only `a.xmp` is there, so the
sidecar was moved as `Trip.XMP` (and its retained-packet record was taken
under the wrong spelling). Upper-case candidates are now used only when the
folder lists them exactly (new `MoveFs::listed`).
- `RealFs::same_file` on Windows (no file id in std) depended on argument
order: `same_file("Trip.XMP", "Trip.xmp")` was false when `Trip.xmp` is the
real entry, so saving after a partial rename reported a phantom collision.
It is now symmetric, and also requires the names to differ only by case
(two different files with equal size and mtime were "the same").
- Saving metadata picked the sidecar spelling by `is_file()`, lower case
first, so the atomic write renamed an existing `Trip.XMP` to `Trip.xmp`.
The spelling the folder lists now wins.
The rest were fixtures: FakeFs fault paths, catalog paths and expected
paths spelled with `/` while the code joins with the host separator.
Regression tests: case_insensitive_renames_keep_each_sidecars_spelling
(FakeFs, every platform; fails without the fix) and
same_file_spellings_are_symmetric_on_windows. Linux behaviour unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
AVIF HDR export takes hdrTransfer = pq | hlg (export dialog: HDR curve;
MCP export schema lists it). HLG writes CICP transfer 18 and no clli box.
The window logs whether it shows HDR; today always SDR (eframe configures
an 8-bit surface), with the platform / surface format / headroom / opt-out
rules unit-tested. Also satisfies clippy 1.99's chunks_exact_to_as_chunks
in spots.rs.
Part of #868.
Sources: ITU-R BT.2100 (HLG OETF, inverse OOTF with system gamma 1.2),
ITU-R BT.2408 (203 cd/m2 reference white at 75 % HLG); own design for
the display decision.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
bflatastic