Each drag tick changed the edited photo's settings, so the filmstrip asked
for a new thumbnail render every frame. For an unedited raw shown with its
embedded preview, the thumbnail-level source had never been decoded, so each
of those renders decoded the whole raw (a 64 MP ARW: over a second), several
side by side, and the loupe's drafts queued behind them.
- The edited photo's thumbnail is not re-rendered during a slider drag while
it has one; it follows once the drag ends.
- A thumbnail of a photo whose preview-level source is decoded (the one in
the loupe) is cut from that source (SourceRef::Fit) instead of decoding the
file again; not when the photo has a denoised picture.
Co-Authored-By: Claude <noreply@anthropic.com>
Add correlated dark holdouts that reject misleading training and accept
matching training. Check finite, monotone curves in both cases. Confirm
the regression fails with the error gate removed and passes when restored.
Qualify the improvement claim when no original curve can be fitted, and
explain the source-look process policy and offline smart preview refresh.
Co-Authored-By: Codex <noreply@openai.com>
Use separate luminance pairs for tone fitting so the camera look follows
its JPEG into deep shadows. Keep colour pairs and holdouts unchanged.
Require enough correlated shadow samples and lower held-out error, with
noise and compression floors and the existing median curve fit.
Add synthetic regressions, bump look and render cache versions, and
record the public multi-make and private numeric validation in the docs.
Fixes#1307
Co-Authored-By: Codex <noreply@openai.com>
library.up / library.down (Up / Down) go to the cell above / below in the
grids (nearest by position in justified rows; the top / bottom row stays
put), and step one photo in the filmstrip.
Sources: own design.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With XMP auto-write on, photo.readMetadataFromFile committed what it read
and the command handler then wrote the sidecar back, adding lc:settings to
a sidecar that had only another app's crs: settings. Later reads prefer
lc:settings, so LRTimelapse's next crs: edits were ignored. The read now
sets the existing one-command skip_auto_write switch (as photo.removeRegion
does); edits made afterwards are still auto-written.
Tests: a read leaves the sidecar byte for byte and a later develop edit is
still written; the issue's crs:Exposure2012 0.5 -> 1.2 round trip is read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A panic inside RenderJob::run or QuickJob::run (a raw decoder or pipeline bug) unwound the
job pool's worker without sending a result. The slot stayed pending and its key was never
asked for again, so the loupe or the thumbnail rendered forever; and the pool never
replaces a dead worker, so after as many such panics as it has workers (2–6) no photo
rendered until LightCraft was restarted.
Both now catch the panic (guard::catch) and return it as the job's failure, answering the
request it came from, so the renderer records it like any failed render: no retry until
the catalog changes, and the workers live on. run() is the one place every render goes
through (the pool, export, Build Previews, contact sheets, face and AI-mask workers);
callers that had their own guard keep working, and the watermark preview's, now
redundant, is gone. The web build aborts on panic, so nothing changes there.
Co-Authored-By: Claude <noreply@anthropic.com>
A lensfun profile is scaled by the crop factor of the recorded frame. `lookup` took the body's from the
database whenever the camera was in it, so a full-frame body shooting a crop of its sensor (APS-C /
Super 35 mode, or switched there by an APS-C lens) had the profile applied as if the crop were the full
frame: the crop's corners got the full frame's corner distortion and vignetting. On a Sony ILCE-1M2 in
APS-C mode with the FE 100-400mm F4.5-5.6 GM OSS at 400 mm, the warp's r³ coefficient was the full
frame's 0.0215 instead of 0.0096.
The 35 mm equivalent focal length shows the crop: when it implies a crop factor more than 10 % above the
body's, that wins (`frame_crop_factor`); within 10 % the difference is the tag's whole-millimetre
rounding and the body's value stands. Without the body in the database the 35 mm equivalent is used, as
before.
Tests: `in_camera_crop_mode_uses_the_frames_crop_factor` (fails on main: in its profile the APS-C frame's
vignetting gain is 0.40 instead of 0.18) covers APS-C mode, full frame, a 35 mm equivalent rounded by a
millimetre, no body in the database and a hostile focal length. Checked on 19 private ILCE-1M2 ARWs
(FE 100-400mm GM, Sigma 24-70mm F2.8 DG DN | Art, full frame and APS-C, firmware 2.01-4.00): every
APS-C coefficient is the full-frame one scaled by 1/1.5².
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Photo Merge decoded each raw itself and wrote the reference frame's own colour
tags into the merged DNG. A CR2 (and NEF, ARW and the other raws whose colour is
fitted from the camera JPEG) has none, so an HDR merge of CR2s rendered with no
camera colour: green and about 16 L* dark.
`lightcraft_merge::load_frame_with` takes the raw's colour tags from the caller,
and the engine passes `starting_colour_tags`: the colour the raw opens with
(`starting_colour`) as DNG tags. That is one forward matrix with a colour matrix
and AsShotNeutral that agree with it at the as-shot white, the look's hue/sat
table as ProfileHueSatMap and its tone curve as ProfileToneCurve. Raws with
their own matrices (DNG) keep their tags. The look's chroma curve has no DNG
tag and is left out.
On two CC0 CR2s (EOS 550D, 40D) an HDR merge of three copies against the photo
alone: mean CIE76 dE 26.15 -> 1.07 and 22.89 -> 0.47.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The header-only path added in #755 answers for a Fuji RAF, whose preview pointer sits in the first
bytes. A Canon CR3 keeps its preview in a JPEG track, and a TIFF raw (CR2, ARW, DNG, RW2, 3FR …) can
keep its preview tag in an IFD the prefix cuts short: both fell back to `std::fs::read` of the whole
file — tens of megabytes for a JPEG of a few, on the format of the largest bucket in gaps.md (Canon,
33 % of photographers).
`preview_window` now asks `lightcraft_raw::sparse::preview_plan` — the module #961 added for the
import path, which had no production caller — which ranges `embedded_preview` reads, and reads
exactly those: `planned_preview` fills a buffer of the file's length, reads the ranges the plan names
and asks again until it says `Ready`. The buffer is the file's length, which the memory gate counted
already, and its untouched pages stay zero, so what this path costs is the bytes read — on macOS a
freed buffer of that size may sit in the allocator's cache rather than go back to the OS (measured on
a 38k-photo import, #832). The loop gives up past 60 % of the file, the bound step 2's partial read
uses, and a plan that does not fit, a file past 1 GiB or a window that does not decode all end in the
whole-file fallback.
The quick path hands the JPEG to the decoder alone, so two container facts the whole-file path applies
have to be visible in the bytes it is handed, or the file declines and the whole file keeps the
preview:
- a preview colour space of Adobe RGB (`decode_raw_preview` applies it; a JPEG-only decode has the
JPEG's own space, else sRGB). A container that says sRGB does not decline — that is what the decode
assumes anyway, and declining it took the fast path away from a real Sony ARW;
- the file's own EXIF orientation, when the preview JPEG carries none of its own: the plan's header is
a bounded 64 KiB (the header route grows its prefix to the preview's declared extent instead), and
an orientation tag it cannot see would show the preview unrotated.
Measured over the whole CC0 corpus (111 raws): 52 files take this route, reading a median 7.8 % of
their bytes (0.9-27.7 %) — RW2 3.3 %, Leica RWL 4.1 %, ARW 7.5 %, CR3 8.4 %, DNG 9.7 %, CR2 14.3 % —
while the 21 RAFs stay on the header route (median 4.5 %). The other 38 read whole: NEF, NRW, ORF, PEF
and SRW because the planner does not describe them (an SRW plans to the whole file, which the 60 %
budget then declines), plus the ARWs, CR2s, CR3s and DNGs that declare Adobe RGB or whose plan wants
more than that budget — the bytes they read are the ones the plan would have read anyway. Across all
111 files the plan handed on the same preview as the whole file, with the skipped bytes zeroed and
again 0xFF. `LIGHTCRAFT_PROFILE=1` prints
[profile] preview …/arw-sony-a7rm4a-compressed.arw: read 688128 of 61832192 bytes (plan, window 483441)
Tests: a synthetic TIFF/DNG whose preview only its tags locate (identical pixels to the whole-file
path, the CFA strip unread), the same structure without the tag that makes it a raw, a file whose
orientation only the whole file shows, and a file that states Adobe RGB against one that states sRGB;
the opt-in real-file test reports which path answered.
Co-Authored-By: DeepSeek V3.2 <noreply@deepseek.com>
20 engine tests failed on Windows on clean main. Three real bugs on
case-insensitive volumes (Windows, default macOS APFS) caused most of them:
- Renaming a photo probed `a.XMP` before `a.xmp`. On a case-insensitive
volume the upper-case spelling "exists" when only `a.xmp` is there, so the
sidecar was moved as `Trip.XMP` (and its retained-packet record was taken
under the wrong spelling). Upper-case candidates are now used only when the
folder lists them exactly (new `MoveFs::listed`).
- `RealFs::same_file` on Windows (no file id in std) depended on argument
order: `same_file("Trip.XMP", "Trip.xmp")` was false when `Trip.xmp` is the
real entry, so saving after a partial rename reported a phantom collision.
It is now symmetric, and also requires the names to differ only by case
(two different files with equal size and mtime were "the same").
- Saving metadata picked the sidecar spelling by `is_file()`, lower case
first, so the atomic write renamed an existing `Trip.XMP` to `Trip.xmp`.
The spelling the folder lists now wins.
The rest were fixtures: FakeFs fault paths, catalog paths and expected
paths spelled with `/` while the code joins with the host separator.
Regression tests: case_insensitive_renames_keep_each_sidecars_spelling
(FakeFs, every platform; fails without the fix) and
same_file_spellings_are_symmetric_on_windows. Linux behaviour unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The tests were written for a case-sensitive disk. rename.rs sidecars() offers both
.XMP and .xmp per naming and keeps those that exist; on case-insensitive APFS
a.XMP "exists" for a file stored as a.xmp, so the code renames a.XMP while the
fault injectors (Faults twice, PartialRename) compared exact paths with the
lowercase one: the injected failure never fired and the rename the tests expect
to be refused succeeded.
Fault injectors now match by same_path_or_file (equal path, or the same file by
identity); two assertions that compared an exact spelling use same_path_for_volume
(equal, or equal ignoring ASCII case on a case-insensitive volume), and one that
required the lowercase packet to be absent is skipped there, where both spellings
are one file. Helpers live in tests_xmp.rs. Production code is not touched.
Run with rustc 1.99.0 on macOS: case-insensitive APFS, the ten failed before and
pass now; case-sensitive APFS (a disk image), the original tests pass and so do
these. All 13 sidecar::tests_repair tests pass on both. cargo fmt is clean and
clippy over lightcraft-engine with --all-targets is clean. Not touched: the
.xmp -> .XMP spelling change on rename, and the Lightroom folder test (its own PR).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Photos that tie on the sort key (equal ratings, one import batch, a
burst within a second) now sort by file name before id, in
Catalog::query, Recently Added and auto-stack. Split out of #641.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
APFS refuses names that are not valid UTF-8 (EILSEQ, os error 92), so the test's
create_dir_all(...).unwrap() panicked on macOS. The test now probes once with a
\xff folder; where that fails, the non-UTF-8 folder case and the non-UTF-8 entry
are skipped and the catalog-folder and symlink cases still run on a plain-named
folder. Where the probe succeeds (Linux, FreeBSD) the test is unchanged.
Run on macOS (case-insensitive APFS, rustc 1.99.0): the five tests in
tests_lightroom_folder pass, cargo fmt is clean, and clippy over lightcraft-engine
with --all-targets is clean. The ten sidecar tests of item 3 are not touched.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
On merge: the HDR histogram is applied in develop_reporting (#712 split develop), is skipped for
draft renders (a second render per drag tick), and HdrBins::bin clamps a hand-built split so it
can't underflow (test hdr_bins_with_any_split_stay_in_range).
photo.editExternal takes the selection (or ids, at most 50): each photo gets its own -Edit copy
stacked on its original, the copies are selected and returned in copies (path / id / original
still name the first). Photo ▸ Edit In opens each copy in the editor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BKWB9TCnvzJHV6xMLAj2J4
On merge: Lightroom's default profiles (Adobe Standard, Adobe Color), named by nearly every sidecar,
give no camera-profile warning; other profiles still do (test default_lightroom_profiles_are_not_reported).
The import help string keeps main's onDeleted wording and gains warnings.
On merge: the quick preview path orients like the whole-file path (preview_orientation with the
raw's header prefix, so a portrait raw whose embedded JPEG carries no orientation is not sideways),
and its doc links point at preview_window.
move_across_volumes read both whole files into memory to compare them; it now
compares lengths first, then streams 1 MiB chunks. The grid's Move to Folder…
asks through pick::ask (background dialog where the host has one) like the
other folder pickers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BKWB9TCnvzJHV6xMLAj2J4
bflatastic