load_bytes_now timed the binned demosaic with std::time::Instant, which
panics on wasm32-unknown-unknown ("time not implemented on this
platform"). Opening a raw in the web build aborted the decode. Use
web_time::Instant, as library.rs already does.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Reopening a library (or opening another one, or set_disk_cache_bytes
falling back to attaching) replaced MediaCache::rendered with a new
PreviewCache, but render jobs still in flight kept the old object.
Each PreviewCache checked only its own generation, so after a clear on
the new cache the old one's generation was still current: a finishing
thumbnail job wrote its pixels through it into the directory the clear
had just emptied. The UI rejected the result, but the JPEG stayed.
attach_disk_cache now retires the cache it replaces before swapping it:
PreviewCache::retire takes the generation write lock (so it waits for a
write in progress, like clear) and marks the object retired; every
get/put/put_deferred through it is then refused and its clear() is a
no-op, as its directory may now belong to the replacement. Files on
disk are left alone, so a plain reopen still finds its thumbnails, and
resizing the budget in place keeps the same cache object as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Changing the disk cache size (library.preferences cacheMb) re-attached a
new PreviewCache object, and the renderer treats a new cache object as a
library reset: every texture, the loupe included, was dropped and
re-rendered. Thumbnails are keyed by content, so a new budget leaves them
valid. The budget now changes in place on the attached cache (same object,
same generation); the next write trims to it, as before. A preview clear,
a generation bump and a new library still invalidate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Skip unchanged thumbnail jobs and reuse bounded settings hashes (both maps
capped at 1024 entries). Reject stale render results and cache writes after
edits, library changes and preview clears: render requests carry a request
id and cache generation, PreviewCache writes and reads hold the generation
lock that clear() takes, and library.clearPreviews also drops cached
sources. The web worker index follows the same generation rule.
The decoder guards, Windows path fixes and test fixture changes that were
bundled in a327b98 are separate commits; the benchmark follows this one.
Co-authored-by: Codex <noreply@openai.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Catalog paths may mix `/` and `\` on Windows, so raw string comparison saw
`N:/photos/IMG.jpg` and `N:/photos\IMG.jpg` as different files:
- Rename: planning, the move list, move_file_with and file_moves now compare
as paths. A separator-only "rename" is a no-op: no file move, no catalog
change and no undo entry, alone or batched with a genuine rename.
Previously it attempted a plain rename onto the existing file, failed, and
rolled back the rest of the batch. Case-only renames still work (#95).
- Import: the already-in-library index is keyed by PathBuf.
- Tests build expected paths with Path::join, and the CLI test escapes the
device path with serde_json instead of string formatting.
Split from a327b98 (T0 thumbnail work), with the follow-up rename fix that
the committed version needed.
Co-authored-by: Codex <noreply@openai.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A catalog loaded from disk counts revisions from 0, like a new empty one, and the sidebar
counts, keyword tree, date groups and grid list are cached by revision alone. Opening an empty
library after one that was never edited this session therefore kept the old library's numbers.
Each catalog loaded in a process now gets its own revision range.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A build script's cwd is its package root, so CRAFT_FONTS_DIR=../craft-fonts —
the spelling the README and craft-fonts' integration docs both use, written
relative to the workspace root — resolved to crates/craft-fonts and failed.
The failure is silent from the user's side: the app runs, the language menu
lists every language, and selecting Chinese or Japanese paints boxes. Warn
when no font ends up embedded, not only when the variable is set but wrong.
Switching to Random from another key (without an explicit seed) derives a new seed
instead of reusing the one left behind, which was the fixed seed-0 order on a new library.
Re-choosing Random or changing only the direction keeps the shuffle on screen.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- library.shuffle treats a null seed as none given
- seeds are limited to 0..2^53-1 so JSON-double clients read them back exactly
- album test now fails if manual order overrides Random; persistence test goes through
close/reopen of the library instead of a serde round trip
- README lists random among the sort options
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
SortKey::Random orders photos by a splitmix64 rank of (Sort.seed, id): same seed gives
the same order, and added/edited photos never reshuffle the others. library.sort takes
an optional seed; library.shuffle picks a new one (below 2^53 for JSON clients). Menus
gain Random and Reshuffle; Ascending/Descending are disabled for Random. No effect in
Recently Added (always newest import first).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
RW2 / RWL / RAW join ARW and NEF: the starting look (matrix, hue/saturation table, tone and chroma curves) is
fitted to the file's own embedded JPEG behind the same gates, with white balance relative to the as-shot look.
Panasonic previews always show the whole active area while the default crop is the in-camera aspect ratio, so when
the preview matches the active area instead of the crop, the reference is cropped to the default crop before
fitting (corpus_rw2_with_an_in_camera_crop_gets_a_camera_look).
On 174 CC0 samples with a preview 140 fits are accepted (93 of the 114 bodies with a preview), median ΔE against
the camera JPEG 5.0 with matching lightness; most of the others are compacts and kit zooms whose camera JPEG is
distortion-corrected (tag 0x0119 isn't used yet). `lightcraft-cli calibrate` keeps collecting ARW and NEF only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QtQmZ6peZXGn3wiqeowV2v
The downloader in lightcraft-segment (mirrors, resume, pinned SHA-256, pure-Rust
HTTPS) was already generic apart from four SAM 3 constants. Move it to
crates/fetch (L0, native only) so other model features can use it without
depending on the SAM 3 inference code. lightcraft-segment keeps SAM3_FILES,
DEFAULT_MIRRORS, MIRRORS_ENV and wraps mirrors(); no behaviour change. The
downloader's 13 tests moved with it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Decode every raw encoding Panasonic and Leica bodies write, from the DMC-LX1 (2005) to the DC-S1RM2 (2025):
compressed formats 4 (most bodies, 2008-2022) and 6 (S1 / S1R / S1H / S5, GH5M2), the prefix-coded strips of
format 8 (GH6 and later), packed formats 2, 5 and 7, and the 16-bit words of the 2005-2007 .RAW files. Until now
only format 5 decoded; every other Panasonic file opened as preview only.
Clean-room: no raw-decoder source was read. Tag names come from tag documentation; every encoding was recovered
by black-box analysis of 178 CC0 files from raw.pixls.us (118 bodies), and the module docs note the measurement
that settled each rule. Format-8 tags of unknown meaning must carry the values every sample has, otherwise the file
is reported as unsupported rather than guessed at.
Levels and geometry: formats 4 and 6 store samples 15 above the recorded black level (files without one use 15);
white is the active area's saturation plateau (the linearity limits are wrong on extended low-ISO shots, the GF1
and the Digilux 3); the in-camera aspect ratio is the default crop; mapped-out defect pixels are filled from
same-colour neighbours; the CFA pattern applies at sample (0, 0).
.rwl and .raw files are imported (engine, MCP folder expansion, file dialog, Linux MIME types). One file per
encoding joins the never-panic proptest; 11 CC0 files join `cargo xtask corpus`, and corpus_panasonic_encodings
checks each encoding's bit depth, black level, crop and CFA layout against the camera's own JPEG.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QtQmZ6peZXGn3wiqeowV2v
- paths are built by component, not with a hard-coded '/' (cli, import, rename, find-missing)
- the rename tests' model volume treats both separators as one
- the Local-folder UI tests hide Home when the temp folder lies inside it, and wait for
the worker-thread listing instead of three frames
- the GPU equivalence test tolerates up to two edge pixels where the CPU and the card
fall on different sides of the lens-warp sampling boundary
cargo xtask ci: all 7 steps pass.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Engine (crates/engine/src/segment/):
- One worker thread owns the model and the encoded photo; the session
sends jobs (with the render job for the model input) and gets results
over channels, never locking what the model holds. In the app
(Segmenter::background) clicks, descriptions, prepares and detail
passes return at once and Session::segment_poll applies results (one
undo step per settled selection, pending clicks shown on the photo);
the CLI/MCP wait for them. Newer requests for the same selection
supersede queued ones.
- Every job runs under catch_unwind: a candle panic becomes an error and
the model is reloaded next time; busy counters are reset by drop
guards; a dead worker is restarted. The model unloads after 10 min idle.
- segment.model.status / .download {acknowledged: true} / .cancel: the
download runs on its own thread; status via atomics (try_lock only).
Without the model every AI request fails at once with "The SAM 3 model
is not installed…"; renders/exports never need it; `seg` params make
AI masks from stored segmentations without it.
- Hostile documents: at most 4 detail patches per component (capped on
deserialize and in the renderer), at most 64 Object clicks.
UI: Object / Describe without the model open "Download the SAM 3
Model?" (size, folder, SAM License link; Not Now / Download, progress,
cancel, Try Again with the reason, Continue once installed); progress in
the Masking panel when the dialog is closed. Reverted the PR's unrelated
default change (mask overlay off + hover-red) to main's behaviour.
tools/install-sam3.*: --fail so error pages never land in files, 416
restarts instead of looping, the weights are verified before they are
moved into place (a bad file is deleted, never resumed from).
Docs: docs/ai-masks.md (in-app download, mirrors, SAM License summary,
no weights in the repo), NOTICE, parity LR-MASK-OBJECTS, What's New,
ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A built-in Sony ILCE-7M4 colour profile (assets/camera-profiles/ILCE-7M4.json, compact JSON, 39 KB), fitted by lightcraft-cli calibrate to the contributor's own 597 raw photos against their in-camera JPEGs; aggregate colour statistics only, MIT OR Apache-2.0. Compiled in via camera_profiles::BUNDLED; a local profile replaces it.
Co-authored-by: Harald Hoyer <harald@hoyer.xyz>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts with issue #150 (NEF colour from the camera JPEG): the per-file
look, its hue/saturation/value table and chroma curve, and camera
profiles now apply to every `file_local_look` format (ARW, NEF, NRW);
`calibrate` also collects NEF/NRW. Render cache version 11 (main 9,
branch 10).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
One photo can show too little of a colour for its own fit: a lime shirt
covering a few dozen proxy pixels next to foliage at the same hue stayed
yellow (hue 68 deg vs the JPEG's 82 deg).
- `lightcraft-cli calibrate [--max N] [--out DIR] FOLDERS...` pools the
colour pairs of many ARWs per model (each against its embedded JPEG,
192 px proxies, <= 4000 pairs per photo) and fits one matrix from
white-balanced camera RGB plus a hue/saturation/value table.
- Profiles live in $LIGHTCRAFT_CAMERA_PROFILES or
<config>/camera-profiles/<model>.json; validated on load, damaged files
ignored with a warning, part of the render cache keys.
- Photos of a profiled model take its colour and fit only their own tone
and chroma curves; the acceptance gates still apply.
- The table fit buckets samples by hue and runs nodes in parallel; the
app's config_dir moves to the engine.
Profile from 300 Feb-Aug ILCE-7M4 photos (2 min); 29 held-out September
photos: mean dE vs camera JPEG 3.54 -> 3.10, saturated 6.41 -> 5.20;
the shirt's hue 68 -> 82 deg (JPEG 81.5).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Port of PR #198 onto the language table:
- Traditional Chinese (Taiwan) catalogs as a table entry: code zh-hant, name
繁體中文（台灣）, script Hant; zh-TW / zh-HK / zh-Hant tags reach it; command
app.language.traditionalChinese
- display-only helpers: builtin_label (stock preset/profile names), history_label
(generated history steps, user preset names verbatim), source_label (library
headings, album names verbatim), date_group_label / display_time
- menu, dialog and panel strings (profiles, presets, curves, crop, versions,
history, grid, date sidebar, About links) go through the catalogs
- a language command and ui.set apply the language at once; a native-menu test
checks that every language switch rebuilds the menu titles
Adapted while porting (Claude):
- date headings and capture times are localised for every language from its
*-formats.json date patterns, not only for zh-TW; ja and zh-hans gain the date
patterns, weekday names and "Unknown Date", and zh-hans the new menu messages
(ja's come from the PR)
- plain catalogs may cover different messages (English fallback); the test
reports the gaps instead of failing. The test requiring every engine command
label to be translated is dropped
- preset groups stay grouped by name: a user preset in a stock-named group is
not split into a separate group (the group header is translated when it holds
stock presets); the PR's split was a side effect of labelling
- no Traditional Chinese face in craft-fonts yet: Hant prefers the Simplified
Chinese face (which carries the Traditional characters) over the Japanese ones
- zh-hant translations for the messages main added since the PR branched
Co-authored-by: Codex <noreply@openai.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Regions are stored on the upright (EXIF-oriented) photo, but the loupe's normalized frame and the
close-up crop include the user's orientation. The loupe overlay now maps each box into that frame
(and a resize drag back out of it), and face_job maps the face and swaps the photo's size for a
quarter turn. Flips need nothing: they are applied after the normalized frame. Adds
Orientation::inverse and Orientation::map_norm_rect.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Re-reading a sidecar whose region list was emptied by a region-aware app now clears the stale
regions. A sidecar without mwg-rs:Regions at all (an app that doesn't do regions) says nothing about
them and the photo's regions are kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The symlink fallback ran read_link on every library entry for each existing
target; a large library made every Overwrite export check do thousands of
syscalls. The guard now finds the links on first need and keeps them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
