Canon's SensorInfo left border is not where light starts: on every corpus
body 10-36 columns left of it already hold image (EOS 6D: masked columns
0-70, border 84), and the black level was averaged over all of them. The
6D read 2591 instead of 2047 (4 % of the range), so CR2s rendered dark with
crushed shadows; 40D +141, 5DS R +131, 5D Mark II +73. The masked run is
now measured from the data: columns whose mean stays within 1/256 of the
range of the leftmost columns', minus a two-column margin.
Against Lightroom Classic (EOS 6D still life, 2000 px, ΔE00): base 7.63 ->
5.23 (p95 24.7 -> 11.3); mean over 86 edit variants abs 9.13 -> 6.19,
effect 3.09 -> 2.75.
RENDER_CACHE_VERSION 23.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sensor-clipped pixels are rebuilt at raw decode. The tone map rolls them off to
white at Neutral, so any colour they carry shows only when Highlights, a negative
Exposure or Whites darkens them. They took colour from the nearest unclipped pixel
(dark foliage, lens fringes along branches, pixels demosaiced from clipped samples),
left two clipped channels at their white-balance-scaled clip levels (red or pink),
and were neutral only in camera RGB, not after the colour model (a look fitted to
the camera's JPEG, a camera profile).
- highlight::reconstruct_with: chromaticity only from bright unclipped content away
from edges and from the clip, through a normalised push-pull pyramid; a neutral
estimate blended in where reliable content is scarce at every scale up to a
quarter of the long edge, applied only as far as the pixel lies past the nearest
near-clip unclipped pixels (so a surface still runs into clipping without a
step); clipped pairs keep the estimate's ratio at their clip floors; partly
clipped pixels fade into the clipped neutral on their way from the first channel
clipping to the last; fully clipped pixels become the colour model's neutral.
Pixels without a clipped channel are left exactly as they were.
- engine: the decode colour step as CameraColourModel, with clipped_white, which
keeps the camera's neutral for nearly singular or implausible models.
- Tests in raw (continuity along a ramp through every clip, also as lines 1 to 16
rows thick with no reliable colour, on canvases 32 to 1024 rows), engine
(pipeline renders at Highlights -100, #523's edit and Exposure -2 through the
first clip, over the same sweep; a CC0 ILCE-7RM4 corpus file added to
RAW_SAMPLES) and the GPU equivalence suite.
- Render cache version 27.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
High Efficiency NEFs (HE / HE★, Z 8, Z 9, Z 6III, Z f) keep compression
34713 but carry a JPEG XS-based codestream (SOC + CAP, FF10 FF50) and no
maker-note 0x0096 table. They fell through to "Nikon compressed NEF
without a linearization table", so the Preview only notice gave Z f users
no hint why their raw wasn't decoded or that Lossless compressed NEFs work.
Detect the codestream before asking for the table and report "Nikon High
Efficiency NEF" with the workaround. Add a synthetic regression test, CC0
Z f HE + Lossless samples to the corpus (raw.pixls.us) with a corpus test,
and list HE NEF among the format gaps in parity.md and ROADMAP.md.
No decoder: the format has no public specification and the existing
decoders (LibRaw, rawler) are LGPL and derived from Nikon's binaries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011bbmJTxYJyYqKfNH8uXRC6
A DNG can state a white level the sensor never reaches (an iPhone 15 Pro Max Bayer DNG states 4095 but clips at 3567), so clipped highlights were not recognised and white balance tinted them magenta. On decode, samples that form a plateau clearly below the white level, with nothing above it, are raised to the white level. RENDER_CACHE_VERSION 25 (needs adjusting at merge).
Lightroom Classic 15.6 imports an XMP packet's channel curves only when it holds
ToneCurvePV2012 and all three of ToneCurvePV2012Red/Green/Blue; any partial set
(master + one or two channels, channels without the master) imports without
channel curves. #416 read them whenever the master curve was present.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fitted with `lightcraft-cli calibrate` to 125 usable ILCE-7CR ARWs (of 131,
September 2025 to September 2026, Standard creative style) and their
in-camera JPEGs; aggregate colour statistics only.
Without it, 8 of the 131 photos fail the fit gates and open with the
neutral matrix (dE76 6-26 against the camera JPEG). On 26 withheld photos
(profile fitted to the other 105) mean dE76 goes 4.07 -> 3.29 and both
withheld rejections are accepted (26.0 -> 6.1, 6.2 -> 5.5); the 24
withheld photos whose own fit was accepted are about unchanged (12
improve, mean 3.06 -> 3.08, worst regression 1.8). With the final profile
all 131 are accepted. The nine public raw.pixls.us ILCE-7CR codings stay
accepted (mean 1.59 -> 1.99).
A corpus test checks the public lossless-L sample's fit keeps exactly the
built-in profile's matrix and table.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Three CC0 raw.pixls.us files of one ILCE-7CR (61 MP) scene: lossless
compressed L and M (subsampled YCbCr) and compressed ARW2. A raw corpus
test pins model, colour-filter layout, black level, white level, as-shot
gains and default crop, and checks that the lossless and compressed
mosaics agree inside the crop (green block correlation 0.9976). An engine
corpus test checks each gets a fitted camera look, not the neutral
fallback. All nine public codings decode and fit (mean dE76 1.59 against
their camera JPEGs).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reuse the landed current-view deletion selection logic for photo.deletePermanently, retaining survivors or choosing the next neighbour and the previous at the end. Preserve catalog-only deletion and existing undo/persistence behavior.
Refs #441, #451, #545.
A catalog written before the lens data was read at import (RW2/RWL from
v0.4.0) has none stored, and the lens correction stays off. Reload now
stores the fresh probe's lens data (new journaled, undoable
Op::SetEmbeddedLens; catalog format 4) and, for photos still at import
settings, switches the correction on as import does. Edited photos and
photos with a default-preset look keep their settings.
A Custom white balance from a Lightroom catalog or XMP sidecar was taken as absolute Kelvin for every
raw. Raws LightCraft develops relative to their as-shot look (ARW, NEF, RW2, RAF, CR3, CR2, PEF; 6500 K
means as shot) then read a small tweak as a large blue shift: ΔE 22 against Lightroom's export on the
photos of issue #510.
The crs mapper now takes a `Target` (preset, rendered, raw with a measured illuminant, relative-WB raw)
instead of a bool. For relative-WB raws, and rendered files with only `Temperature`, a Kelvin value is
converted to the same mired shift from the packet's `AsShotTemperature` / `AsShotTint`. Without that
reference (Lightroom catalogs keep none for Custom photos) the photo stays As Shot and the import
report lists `Temperature, Tint` as not carried over. Import, sidecar read and catalog import decide
the target the same way through `lightcraft_catalog::relative_wb_format`.
Tests: shift from the issue's numbers (3650 → 3578 K lands at ~6275 K), the As Shot fallback with its
report entry, target selection per file, and the catalog mapper's Custom-WB case.
Each photo's develop settings record the rendering process they are
interpreted by (`DevelopSettings::process`). There is one process, V1, the
pipeline as it is; nothing renders differently (180 CPU 8/16-bit and GPU
renders of procedural scenes, and the saved settings JSON and hash64, are
byte-identical to main).
Settings saved without the field load as V1 (a field-level serde default),
new settings get the latest (`Default`), and V1 is left out when saving, so
files and preview-cache keys stay as they were. A damaged value (anything
but a whole number up to 2^32 - 1) reads as V1 too, so it never costs the
rest of the settings (an unparsable `lc:settings` sidecar is ignored). Reset moves a photo to the
latest process, section and slider resets don't; virtual copies inherit
it; copy / paste / sync / Auto Sync / presets don't carry it; a number from
a newer LightCraft is kept and renders with the newest known process. The
process is not an edit (Edited badges, import-look checks). The base tone
map is chosen per process in one place (`finish::base_tone`, shared by CPU
and GPU). Photo > Update to Current Process (`develop.updateProcess`) moves
selected photos on an older process to the latest as one undo step. Its
menu enablement follows the selection; a call that names photos (`ids` /
`id`) is validated on those instead, through a new opt-in
`CommandSpec::explicit_targets` (execute checks enablement before the
handler sees `ids`). `develop.get` reports the process. The rule and how to add V2:
docs/process-versions.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The interactive installer now walks Welcome -> Destination Folder ->
Ready -> progress -> Completed (from #79). Destination Folder is WiX's
InstallDirDlg: Program Files\LightCraft by default, Change... browses,
and WixUIValidatePath refuses a folder that can't be used.
The chosen folder is written to HKLM\Software\LightCraft\InstallFolder
and read back (into PREVIOUSINSTALLFOLDER, then INSTALLFOLDER after
AppSearch unless given on the command line), so a major upgrade stays in
the user's folder instead of moving back to Program Files. Silent and
passive installs show no dialogs and take INSTALLFOLDER=....
packaging-lint fails if lightcraft.wxs loses the folder page, the
remembered folder or the completion page's launch action.
Tested with wix 5.0.2 (x64, arm64, x86 build) and msiexec /qn: upgrade
from 0.4.0 stays in Program Files; a custom INSTALLFOLDER install, an
upgrade without it (stays), an upgrade with another INSTALLFOLDER (moves
there), and uninstall (files, folder and registry value removed).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brandon Thomas