The semibold family had a semibold Inter but, for other scripts, the same
regular craft-fonts faces as regular text, so a heading or the chosen tab
in Arabic was drawn at regular weight beside bold Latin.
A fallback face with a weight axis (today Noto Sans Arabic, 100 to 900)
is now registered a second time for the semibold family at weight 600,
through epaint's FontTweak::coords. The bytes are borrowed from the
embedded font, not copied. Faces with one fixed weight, regular and
monospace text, the order of fallbacks and Latin are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The D90 writes 4352 x 2868 samples whose last 42 columns (from 4310) are
filler at a flat ~254, above its dark image samples (black 0). The
masked-column test only trims columns near zero, so they stayed in the
image and developed as a pink band on the right. Measured on 10 of 550
NEFs from one body: the camera's 4288 x 2848 JPEG sits at (10, 10), and
green saturates at 3840-3851 while red and blue run on to 4095, so one
white level of 3830 keeps clipped highlights white. The D90 joins the D4
in MEASURED_BODIES; other bodies are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sony ARWs of cameras without measured colour matrices were edited on the
relative scale (6500 K / 0 = as shot). Their SR2SubIFD stores the
multipliers of the camera's presets at 2500, 3200, 4500, 6000 and 8500 K;
lightcraft_raw::kelvin_presets reads the as-shot multipliers on the curve
through them and they take the spectral matrices' place in the #730
design (as-shot Kelvin and tint only; look, Bradford adaptation and the
pixel-identical legacy upgrade unchanged).
Covered: ILCA-99M2, ILCA-77M2, SLT-A33, DSC-RX10, ILCE-3500, ILCE-7S.
Kelvin-dial shots read back 3400 -> 3396, 5200 -> 5193, 4700 -> 4708,
5600 -> 5594 K; Shade 7493 K. Off-curve constants (isotherm tilt 0.74,
tint spacing 1) measured from the 14 Sony bodies with both spectral
matrices and presets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Document polling of selection/settings/control ranges and shared edit
interactions. Clarify explicit-photo reads, empty selection and navigation,
and correct photo-tool ID descriptions and MCP initialization guidance.
Partial documentation work for issue 251;
hardware feedback remains outside this change.
Co-authored-by: Codex <codex@openai.com>
Use separate luminance pairs for tone fitting so the camera look follows
its JPEG into deep shadows. Keep colour pairs and holdouts unchanged.
Require enough correlated shadow samples and lower held-out error, with
noise and compression floors and the existing median curve fit.
Add synthetic regressions, bump look and render cache versions, and
record the public multi-make and private numeric validation in the docs.
Fixes#1307
Co-Authored-By: Codex <noreply@openai.com>
With "Leave them", the review refused every click on a file whose photo is in
Recently Deleted, and its "In Recently Deleted" badge was drawn over the
checkbox. Leave them now only keeps such files out of the default selection
(Check All and the file-type toggles skip them); a click checks one and it is
restored, as the import does by default. The badge goes under the checkbox
when it doesn't fit beside it.
Without a path, file.addFromDevice took the first device found, so with
two cards connected the album menu imported from whichever came first.
Like File ▸ Import from Device, the album's Import from Device is now a
submenu with one entry per camera or card (or "No Camera or Card
Found"), each passing its path along with the album.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An album's context menu gets Import ▸ with File ▸ Import's ways in
(Import Photos…, Import from Folder…, Import from Device). file.addPhotos,
file.addFolder and file.addFromDevice take {album}; the scan task carries
it and the review chooses it when the scan is done, if it still offers
that album (not deleted, not a folder or smart album).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
library.up / library.down (Up / Down) go to the cell above / below in the
grids (nearest by position in justified rows; the top / bottom row stays
put), and step one photo in the filmstrip.
Sources: own design.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
New Album always put the selection into the new album. Like Lightroom's
Create Collection, the dialog now has an "Include selected photos"
checkbox: ticked by default (today's behaviour), shown only when
something is selected and never for a folder. dialog.newAlbum takes
includeSelected; album.create already had addSelected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cause: Settings > General > "Confirm before moving photos to Recently
Deleted" defaulted to off, so Delete never asked unless the person found
the setting; and the grid/filmstrip photo menu's Delete Photo ran
photo.delete directly, skipping menus::confirm_delete even with the
setting on.
Fix: the setting is on by default; the photo menu's Delete Photo goes
through menus::confirm_delete like the key and the menu bar. The setting
is now saved as `askBeforeDelete`: every earlier version wrote
`confirmDelete: false` for people who never opened Settings, so that key
is no longer read and those installs ask too. Turning it off still works
and survives a restart. ui.menu.invoke / engine.execute (agents) still
run the command directly.
Test: tests_panels::deleting_a_photo_asks_first_from_the_key_the_menu_and_
the_right_click_menu (failed: off by default, then the right-click menu
deleted without asking) and tests_appearance::delete_asks_first_by_default_
also_for_settings_saved_by_earlier_versions (failed: default off).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The decoders keep the alpha plane, but to_working converted only the
colour, so transparent pixels kept the black most encoders store under
them: renders, previews, exports and contact sheets showed it. The
working image is now flattened onto white, in linear light like the
rest of the pipeline.
With XMP auto-write on, photo.readMetadataFromFile committed what it read
and the command handler then wrote the sidecar back, adding lc:settings to
a sidecar that had only another app's crs: settings. Later reads prefer
lc:settings, so LRTimelapse's next crs: edits were ignored. The read now
sets the existing one-command skip_auto_write switch (as photo.removeRegion
does); edits made afterwards are still auto-written.
Tests: a read leaves the sidecar byte for byte and a later develop edit is
still written; the issue's crs:Exposure2012 0.5 -> 1.2 round trip is read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A photo whose render failed while the loupe showed its embedded JPEG or a thumbnail kept
that stand-in up as if it were the photo; "This photo can't be opened" only showed when
nothing at all could be drawn. Now a caution pill at the "Rendering…" spot says so:
"Original offline · no smart preview" when that is why, else "This photo can't be opened",
with the reason on hover and for screen readers (widget `loupe:renderFailed`). Agents see
it as `ui.inspect` → `loupe.failed`, so one waiting for a finished loupe knows when there
won't be one.
A library change retries failed renders; while the retry of the same key runs, the pill
stays and "Rendering…" doesn't take over. The renderer remembers which photo a failure
belongs to (`failure_of`): the centre message no longer shows the previous photo's error
for a moment after a step. Tests share one render offload (`headless::RenderGate`) that
holds renders and can fail chosen slots.
Co-Authored-By: Claude <noreply@anthropic.com>
Photo Merge decoded each raw itself and wrote the reference frame's own colour
tags into the merged DNG. A CR2 (and NEF, ARW and the other raws whose colour is
fitted from the camera JPEG) has none, so an HDR merge of CR2s rendered with no
camera colour: green and about 16 L* dark.
`lightcraft_merge::load_frame_with` takes the raw's colour tags from the caller,
and the engine passes `starting_colour_tags`: the colour the raw opens with
(`starting_colour`) as DNG tags. That is one forward matrix with a colour matrix
and AsShotNeutral that agree with it at the as-shot white, the look's hue/sat
table as ProfileHueSatMap and its tone curve as ProfileToneCurve. Raws with
their own matrices (DNG) keep their tags. The look's chroma curve has no DNG
tag and is left out.
On two CC0 CR2s (EOS 550D, 40D) an HDR merge of three copies against the photo
alone: mean CIE76 dE 26.15 -> 1.07 and 22.89 -> 0.47.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bflatastic