Read-only and names-only: the left panel gets a People section built from the
named Face regions read from XMP, with photo counts (once per photo, case
insensitive, pets and unnamed faces left out). A click filters the grid via a
new `person` field on `library.filter`, also reachable as a `person:` search
token and shown as a filter chip. The list is cached on the catalog revision.
No face detection, identity or writing regions back yet. Parity rows for the
People list, filter and view are 🟡 with that scope noted.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- safe_file: write policy documented (durable for what can't be recreated, atomic-only for
recreatable outputs); new write_atomic_nosync (temp + rename, temp removed on failure, no
file/folder sync); per-thread sync counter for tests.
- export::write_file (exports, renders, screenshots, merge previews, CLI/MCP) uses the
non-syncing writer; new write_file_durable keeps the sync for Edit a Copy (the TIFF becomes a
library photo). Catalog, sidecars, settings, DNG conversion/merges and smart previews stay
durable; the #93 original-overwrite guard is untouched.
- Import > Copy verifies the synced copy against the probe's content hash (SipHash-1-3/128 of the
whole file) instead of re-reading the source; byte compare when there is no hash. A file changed
since Review Import is now refused instead of imported with stale details. Move keeps its
byte-for-byte check before deleting sources.
- check_write_target: skip building the library-wide guard when nothing is at the target.
- write_new_unique keeps its read-back (DNGs replace raws; cheap next to encoding).
- Tests: no sync on the export path, durable writers still sync, Copy caught by the probe hash
(corrupt copy, stale hash, changed source); ignored timing test write_policy_timing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Smart previews store the decoded source with the fitted colour matrix
baked in, but the file-local tone curve lives in the decoder's
SourceInfo, which a proxy did not keep: an offline ARW rendered and
exported with the generic filmic curve instead (darker, a different
look). The proxy header now carries the curve (validated on load,
ignored when invalid), DecodedSource::info_or merges it into the header
facts, and is_valid reads the longer header.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Resolve SourceRef::load_source against #104's offline fallback: a File
source keeps the decoder's SourceInfo; a smart-preview fallback has none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Re-applies fix/issue-104-ui-fs on top of the data-safety fixes (integrate/safety):
- availability cache: originals and smart previews are checked on a worker thread; the UI
answers from the cache (grid, Info panel, photo menu, Missing Photos view)
- import split into ImportJob::prepare (worker) + commit_prepared, with Cancel; Copy keeps
#96's verified copies
- Find Missing Photos: find_candidates (snapshot, no I/O) + plan_find_missing (all file I/O,
on a worker, never the session) with #105's matching rules unchanged (name+size+hash;
renamed by size+hash; single name+size; ambiguous look-alikes skipped and reported; files
already in use excluded). The plan is applied with library.findMissing {found, missing,
ambiguous}, re-checked against the catalog then: photos relinked meanwhile are left alone,
files now in use are not taken. library.findMissing {folder} still runs synchronously.
- Build / Discard Smart Previews with background: true runs on a worker with progress and
Stop, keeping #106's atomic writes, is_valid checks and `repaired` count (also in
library.previewProgress); the render worker's smart-preview fallback uses is_valid
- Rename preview planned on a worker (plan_rename_photos) on the same planning core as
Session::plan_rename_with (MoveFs, case-only respelling by file identity, #95)
- Local folder listing via fs_cached; tests_offline (slow injected probe, frames < 300 ms)
Tests: worker-planned Find Missing equals the synchronous command for a renamed + ambiguous
library; a plan is re-checked when applied; background smart previews repair a damaged proxy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Library settings (prefs.json, presets.json, view.json): only a missing
file means "defaults". A file that doesn't parse is kept as
<name>.corrupt-<unix time> before the defaults are used; one that can't
be read (locked, I/O error) is never written this session (save_prefs
refuses, presets/view saves skip it). Warnings go to library.info →
settingsWarnings and Session::take_library_warnings; the UI shows each
once in a window (ui.inspect → notices, button:noticeOk).
- Desktop ui.json (holds the library location): written atomically (temp +
fsync + rename + dir fsync), saved as soon as the library path changes and
every few seconds when it changed, failures reported; a damaged file is
renamed to ui.json.corrupt-<time> and reported, an unreadable one is not
overwritten.
- Quit/close with changes only in memory: retry the save (log, then a
snapshot of everything), and if it still fails cancel the close and ask:
Try Saving Again / Quit Anyway / Cancel (ui.inspect → quitPrompt).
- Tests: engine (damaged prefs kept, unreadable presets/prefs untouched),
desktop (damaged ui.json kept, atomic write), headless UI (quit prompt
buttons, settings notice).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The folder move and the photos' relinks form one undo step: undo renames
the folder back on disk (files and sidecars along) and restores the
paths, redo repeats it. A destination taken in the meantime is never
overwritten; the step is refused, reported and stays on the stack.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Convert to DNG / Copy as DNG: the encoded DNG must decode to the same raw
data, then goes through safe_file::write_new_unique (temp file, sync,
read-back, hard-linked to the first free <stem>.dng / -2 / -3 name, never
replacing a file). On failure no DNG is left, the photo is not relinked
and the raw copy is kept.
- Photo Merge writes its DNG the same way.
- Smart previews are written atomically; smart::is_valid (header + complete
JPEG) decides "built", has_smart_preview and the offline fallback, so a
proxy cut short is rebuilt (reported as `repaired`); moving proxies to a
new folder never deletes a good one in favour of a damaged copy and
copies across drives atomically.
Stacked on the #93 branch (shared lightcraft_catalog::safe_file helper).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Saving (Cmd+S or auto-write) now merges LightCraft's properties into an
existing sidecar (lightcraft_meta::merge_xmp): owned properties (rating,
label, dc/IPTC/rights fields, lc:*) are replaced or removed, capture time
and GPS only when LightCraft has a value; everything else (crs:,
xmpMM:History, unknown namespaces, packet wrapper) is kept byte for byte.
The result is re-parsed and checked before it is written (temp + fsync +
rename). A sidecar that isn't valid XMP is copied to .xmp.bak-<time>
(never overwriting) before it is replaced; one that can't be read at all
is left alone and the save fails.
Shared stems: when several catalogued files map to one stem sidecar
(IMG.CR3 + IMG.JPG), it belongs to the raw (else the first by name) and
the others write and read <file>.xmp.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- lightcraft_catalog::safe_file: one tested helper for crash-safe writes
(temp file in the same folder, sync, rename, folder sync; temp removed on
failure), write_new/write_new_unique that never replace a file and read
the result back, same_file, and a per-thread fault injection for tests.
- engine::originals::OriginalGuard: refuses a write whose target is a
catalogued photo's original or XMP sidecar (by file identity), whatever
the conflict policy or exact path. Used by run_batch (export, Export with
Previous, control/MCP exact paths), ui.render/ui.screenshot paths, merge
previewPath, MCP render_photo/screenshot paths (new query command
export.checkTarget) and lightcraft-cli render.
- The conflict policy now covers an export's sidecars together with the
file (Unique gives both the same free name, Skip skips when either is
taken).
- export::write_file replaces the plain std::fs::write in the desktop app,
CLI, MCP and engine writers; XMP sidecar writes use the shared helper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rollbacks in move_file, apply_rename and undo/redo no longer ignore
errors: every move that can't be undone is reported (old -> new), and the
catalog follows the files that kept their new names (an undoable partial
rename; a logged change for undo/redo), so nothing shows as missing.
A file that can't go back keeps the sidecars that moved with it.
library.findMissing: same name + size confirmed by the stored content
hash first, then renamed files by size + content hash, then a unique
name + size match; several look-alikes are skipped and reported in
'ambiguous' instead of guessed. Files already used by a photo are skipped.
Stacked on fix/issue-95-case-only-rename (same functions).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A GPU render no longer hands back an image it cannot vouch for:
- set the wgpu device-lost callback (wgpu never reports a lost device as an
error, so a driver reset went unnoticed); readback waits with a timeout and
checks the poll result and map callback instead of blocking forever
- each render runs in OutOfMemory/Validation/Internal error scopes; errors
fail that render (OOM and limit failures for that render only, device
errors for the process) and it is redone on the CPU
- every buffer is checked against the device limit when created (no
validation error, no process-wide disable); LIGHTCRAFT_GPU_LIMITS=webgpu|<MiB>
creates the device with lower limits to reproduce small adapters
- the output buffer is cleared and the per-pixel kernel writes alpha 255:
any unwritten pixel (work silently dropped, the issue's all-black export)
fails the render; an all-black result is re-rendered on the CPU
- renders submit per stage and every 16 M invocations, the per-pixel stage
runs in ~4 MP bands: no long submission for a slow iGPU's watchdog to reset
- ui.inspect perf.gpuReason / perf.gpuFallback, app.gpu reason/lastFallback,
System Info and Settings say why the GPU is off (e.g. llvmpipe skipped) and
why the last render fell back
Tests: crates/gpu/tests/fallback.rs (limit, mid-render limit, validation
error, dropped work, black photo), engine export falls back to the CPU image,
banded 3000x2000 GPU/CPU equivalence.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Local browse records can be most of a large catalog (85k photos, 90 %
Local: 313.5 MB snapshot). Untouched Local records of folders whose last
browse is older than library.preferences forgetLocalDays (default 30,
0 = never) are now removed from the catalog when the library opens (and by
library.forgetLocal {dryRun?, days?}), as journaled, non-undoable ops, then
compacted in the background. Files and XMP sidecars are never touched;
browsing the folder again catalogues them afresh.
Untouched = a Local file record, not deleted, not a virtual copy, whose
state still hashes to the fingerprint taken when the browse catalogued it
(any change keeps it); records from before fingerprints need every
user-editable field empty/default. Kept too: records in albums (or as
cover), stacks, sources of virtual copies, visible/selected/edited ones,
ones referenced by undo/redo, ones with a smart preview.
Per-folder last-browsed times live in the catalog (Op::SetBrowsed,
normalised with folder_key; re-stamped at most hourly). Old catalogs load
unchanged; folders without a time are stamped now, so nothing is forgotten
on the first open after the upgrade.
persist_bench (85k photos, 76.5k Local, every 7th folder recent, 1 in 50
rated): 63.8k forgotten, plan 162 ms, snapshot 313.5 MB -> 94.9 MB.
Settings -> Performance -> Local folders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A command whose journal append fails now returns EngineError::NotSaved
("saved in memory but not written to disk: <reason>; LightCraft will retry")
instead of OK. The change stays applied and undoable, its ops stay queued and
are written by the next save (any command, or the frame loop with a 2 s
backoff). Queries and commands that change nothing are unaffected; a failed
compaction is reported in lastError, not as a failed command (and a failed
synchronous snapshot now backs off like a background one).
Session::unsaved(), library.info unsavedOps/unsavedError, ui.inspect unsaved;
the desktop UI toasts the failure and shows a warning on the top bar's cloud
icon until a save succeeds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
library.import mode `move` (UI: Transfer ▸ Move, MCP import tool): reuses
Copy's destination, folder organisation (incl. custom templates) and rename
template. Each photo and its XMP sidecars (both namings) are placed without
touching the source (hard link on the same volume, else a new file that is
copied, synced and compared byte for byte; taken names get -1, -2…, never
overwritten). Sources are removed only after the catalog records are
committed and saved, and only when the destination is still intact; failed,
duplicate, unchecked and in-library files keep their sources; sources that
can't be removed are kept and reported (`kept`). Undo removes the catalog
records and leaves the moved files at the destination.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
GPX 1.0/1.1 reader in lightcraft-meta (timed track points per segment; interpolation only within a
segment, nearest point within maxGap otherwise). Engine command photo.autoTagTracklog (path or gpx
text, camera time-zone offset, maxGap, replace, dryRun; one undo step) and Photo ▸ Auto-Tag from
Tracklog… with a time-zone prompt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- merge output_path: a bounded search for a free name instead of
`for k in 1..` + unreachable!().
- library open: Option::insert returns the new library, no expect.
- relink: a one-op batch unwraps through <[Op; 1]>::try_from, no expect.
- lightcraft-mcp (already clean) now #![deny] unwrap/expect/panic/
unimplemented/todo/unreachable; clippy.toml as in the steering PR.
crates/engine/src/export.rs keeps one expect (open PR #51 edits that
file), so lightcraft-engine doesn't get the deny attribute yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File now opens with Import Photos… (Cmd+Shift+I), Import from Folder… and
Import from Device (command ids file.addPhotos / file.addFolder /
file.addFromDevice unchanged; library.import's label is Import Photos).
The review dialog is titled Import Photos, names its source (a scanned
folder is not added to Local; Local -> Browse Folder... is the persistent
location), labels the transfer mode and explains Add in place vs Copy, and
its button reads Import N Photos.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
library.import organize now also takes a folder template, e.g.
{date:%Y}/{date:%Y%m%d} -> 2026/20260114 (Organize::Template). The
template's own / (or \) make the folder levels; each level is expanded
with the rename tokens and sanitized, so metadata can never add a level or
climb out of the destination; absolute paths, drive letters, ~ and . / ..
levels are refused. Dated by capture time, else the import time; a level
whose metadata is missing becomes 'unknown'. The import dialog's Folders
menu gains 'Custom template...' with a template field, tag help, live
validation and an example full destination for every mode; the dialog
stays open (with a toast) when the import is refused. The MCP import
helper passes mode/destination/organize/rename through (docs/mcp.md).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
rename::TOKENS / DATE_DIRECTIVES / TEMPLATE_NOTES are now the one list of
file-name template tags (a test checks expand_tokens knows each, and that
the rename/import command descriptions mention them all). A Tags toggle
beside the import Rename field (also Rename Photos and export File name)
lists every tag with its meaning and a live example, the {date:...}
directives and the rules (extension appended, blank keeps names, missing
date/metadata, unknown tags stay literal); clicking a tag inserts it at
the text cursor. Unknown tags are flagged under the field. New query
command photo.renameTokens returns the same help as JSON. The import
preview now uses the probe's metadata and the import time for undated
photos, as the import itself does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Catalog Meta gets copyright_status (unknown / copyrighted / publicDomain), usage_terms and
copyright_url, read and written as XMP Rights Management fields (xmpRights:Marked, UsageTerms,
WebStatement) on import, sidecars and exports (kept by "copyright only"). photo.setMeta,
copy/paste metadata, metadata presets, a Copyright Status smart-album rule and the Info panel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Menus are rebuilt every frame, and File → Add from Device called
devices(), which scanned every mount (D:..Z: on Windows) while holding
the cache mutex once its 2 s cache expired. devices() now returns the
last scan at once and starts at most one background rescan when it is
stale; the scan runs without the lock. A changed result calls an
on_change hook (the UI requests a repaint), so hot-plugged cards still
appear. library.devices and Add from Device without a path scan
synchronously (devices_now). Volume roots are probed for DCIM directly
instead of listing them (Windows never lists a root). No threads or
clock on wasm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Missing Photos (sidebar count, the view, library.missing, Find Missing)
now shares one scope rule, cmd::missing::checked_path: non-deleted
library photos backed by a file. Local browse records, which can
outnumber the library by orders of magnitude, are never stat'ed. The
Missing view checks only the photos its query kept instead of every
catalog record.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Smart previews always lived in <library>/Smart Previews, so a large set of proxies
filled the library's drive. The folder is now a per-library setting (prefs.json):
- library.smartPreviewsLocation shows the effective folder (path, count, size,
availability) or changes it; changing it needs an explicit choice for the
previews already built (move, leave or discard), and reset returns to the
library's own folder.
- The new folder must accept writes before anything moves. A folder whose parent
is missing (an unplugged drive) is an error and is never created on the current
drive; building also refuses while a chosen folder is unavailable.
- Building, discarding, status and offline rendering all use the chosen folder.
- Settings -> Performance -> Smart previews shows the path before building, what
it holds, the existing-previews choice, Choose Folder... and Use Library Folder.
The thumbnail cache stays in the library.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
rename::expand_tokens is shared by Rename Photos, import renaming and export naming, so {seq:N},
{date:%…}, {camera}, {title}, {ext} work in exports too (a bare {seq} still pads to 3 digits there).
New shared tokens: {num} (number at the end of the name), {folder}, {lens}, {iso}, {rating},
{creator}. An export name that expands to nothing keeps the original name. The MCP export tool
passes startNumber through and documents the tokens.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Browse Folder listed, probed and imported the whole folder on the UI thread, so a
network share froze the window with no feedback. It now lists and reads on a worker
(progress window with Cancel), then adds the photos in small batches reusing the
scan's probes. Folders picked with Browse Folder… stay in the Local list after
browsing elsewhere.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A Point Curve dropdown under the curve graph shows the preset the photo's
point curves match (or Custom) and lists our own built-ins (Linear, Medium
Contrast, Strong Contrast: symmetric S-curves, values chosen here) and the
user's presets; Save Point Curve... names and stores the current four
channels, right-click deletes, Import/Export Presets... read and write
.lccurve JSON files. Presets set only the point curves (parametric curve and
Refine Saturation stay) and are saved with the library preferences.
Engine commands: curve.presets, curve.applyPreset, curve.savePreset,
curve.deletePreset, curve.importPresets, curve.exportPresets; UI commands
file.importCurvePresets / file.exportCurvePresets (file dialogs on desktop).
Fixes#14
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New engine command curve.reset {channel?: all|point|parametric|master|red|
green|blue} (default all = the whole Tone Curve), one undo step, usable from
CLI / MCP / control channel. In the editor: double-click a channel selector
resets that channel, a Reset button under the graph resets every curve
(point curves and parametric), and right-clicking the graph offers
Reset <channel> / Reset All Curves.
Fixes#13
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Raw variants the decoder can't read yet (e.g. Nikon Huffman-compressed NEF
from a D3200/D5100) silently fell back to the camera's embedded JPEG, so
users edited a JPEG with the camera's picture style (e.g. Monochrome) baked
in without being told.
- catalog: Photo.preview_only (serde default; old catalogs load), set /
cleared by Op::SetContent with an exact inverse; Photo::develops_raw().
- engine: ProbeInfo.preview_only carries the decoder's Unsupported reason
into import, the import review (previewOnly) and catalog.query
(previewOnly); photo.inspect includes it. photo.reload and photo.relink
re-probe and clear/set it when the file decodes (or not) now.
- source_info: a preview-only raw is a rendered source (relative WB scale,
display tone curve) instead of raw:true/5500 K + filmic tone map on a
display-referred JPEG; import uses the JPEG default preset for it; the
Edit panel shows the rendered-file WB sliders.
- UI: "Preview" badge on grid thumbnails, a pill on the loupe, a notice in
Edit and Info (amber caution token, Info icon drawn in code).
- Tests: catalog serde/undo, engine import -> reopen -> reload/relink,
headless UI badge/notice widgets.
Refs #10
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An .lmp look is an XML property list of adjustment layers with named
sliders (newer looks: a Name.lmp/Contents/preset.lmp bundle); an
.mplumpack is a zip of looks plus PresetsInfo.plist (GroupName).
preset.import, the file dialog and drag & drop now accept both. Sliders
with a clear counterpart (exposure, contrast, highlights/shadows,
whites/blacks, WB shift, saturation/vibrance, clarity/structure,
dehaze, HSL, point curves, vignette, grain) map onto develop settings;
the rest is reported in `unmapped`. Looks are named after the look and
grouped by the pack. Tests use synthetic looks and packs only.
Fixes#9
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Soft proofing (S in the loupe; S in grids stays Expand/Collapse Stack):
- pipeline Proof {space, destWarning, displayWarning}: gamut-map into the
proof space, show it in the output space; red/blue gamut warnings
(neutral clipping excluded). CPU only; the GPU path declines proofs.
- RenderJob::with_proof; paper-white surround and Proof Preview label;
Soft Proofing strip under the histogram (profile, warnings, Create
Proof Copy = a named virtual copy). view.softProof for control/MCP.
- photo.virtualCopy takes an optional name.
Mask components: MaskComponent.name; mask.component {component, action:
invert|duplicate|delete|rename|op}; right-click / … menu per component,
double-click rename, Intersect button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
