Testing the first version on ILCE-7RM4 photos found a partly clipped sky between
bare branches leaning cyan to teal under #523's edit, where Lightroom shows white.
Where only green clipped, red and blue say such a sky is a pale cyan-blue; the
rebuild kept that colour until halfway to full clipping, and darkening and a camera
profile showed it. Colour borrowed from another surface (bright foliage below the
sky) could also push green up, with a small step where green first clips.
- highlight::reconstruct_with: the colour of a pale partly clipped pixel
(saturation relative to the colour model's white below 0.2, easing off by 0.4)
fades to the clipped neutral from the first clip on instead of from halfway;
brightness and strongly coloured pixels keep the old schedule.
- Borrowed colour counts less and less as both the pixel's own channels and the
rim's colour contradict it (0.15 to 0.4 stop); either alone can be wrong.
- Right past the rim every estimate continues the rim's colour (it used to hold
the clipped channels at their clip, for the neutral estimate only), so the first
clip has no step whatever lent the estimate. The rim is built whenever there is
clipping.
- Nothing jumps where a later channel clips: in the rim distance and the
contradiction, a clipped channel counts as the lower bound it is, and a channel
goes over to that from 0.75 of its clip; a channel about to clip is a floor
capped like the clip floor it becomes.
- Tests: a pale sky above yellow-green foliage with thin dark branches in it (no
step where green clips, no green from the foliage, the same beside the branches,
neutral well past the clip); the fringe test compares the sky beside the branch
with the sky away from it, on its way to neutral; a band whose red clips second
next to a rim of another colour renders without a step, in six layouts.
- docs/parity.md: the Highlights note. Render cache version 28.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sensor-clipped pixels are rebuilt at raw decode. The tone map rolls them off to
white at Neutral, so any colour they carry shows only when Highlights, a negative
Exposure or Whites darkens them. They took colour from the nearest unclipped pixel
(dark foliage, lens fringes along branches, pixels demosaiced from clipped samples),
left two clipped channels at their white-balance-scaled clip levels (red or pink),
and were neutral only in camera RGB, not after the colour model (a look fitted to
the camera's JPEG, a camera profile).
- highlight::reconstruct_with: chromaticity only from bright unclipped content away
from edges and from the clip, through a normalised push-pull pyramid; a neutral
estimate blended in where reliable content is scarce at every scale up to a
quarter of the long edge, applied only as far as the pixel lies past the nearest
near-clip unclipped pixels (so a surface still runs into clipping without a
step); clipped pairs keep the estimate's ratio at their clip floors; partly
clipped pixels fade into the clipped neutral on their way from the first channel
clipping to the last; fully clipped pixels become the colour model's neutral.
Pixels without a clipped channel are left exactly as they were.
- engine: the decode colour step as CameraColourModel, with clipped_white, which
keeps the camera's neutral for nearly singular or implausible models.
- Tests in raw (continuity along a ramp through every clip, also as lines 1 to 16
rows thick with no reliable colour, on canvases 32 to 1024 rows), engine
(pipeline renders at Highlights -100, #523's edit and Exposure -2 through the
first clip, over the same sweep; a CC0 ILCE-7RM4 corpus file added to
RAW_SAMPLES) and the GPU equivalence suite.
- Render cache version 27.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The earlier text quoted the 13 investigation files (held-out RMS within 0.005); the whole CC0 archive shows a worst increase of 0.013 and 7 files that need the conditional-median fallback.
The per-photo look fitted its tone curve as the camera JPEG's median per
scene-luminance bin followed by isotonic pooling. On lens-corrected, sharpened
JPEGs of busy scenes neighbouring bins disagree by more than the gap between
them, so pooling produced flat steps: 13 of 31 segments on a CC0 Z 6II sample,
flat segments in 9 of 13 fitted Nikon Z / ILCE-7 samples. Each step maps a
range of scene tones to one output tone, which renders as posterised patches
with hard edges (issue #475, also #211, #454), and the conditional medians
flatten both ends of the curve.
Quantile matching (sorted scene quantiles against sorted JPEG quantiles) is
increasing by construction and insensitive to misregistration. On the same 13
files no fit has a flat segment, all still pass the gates, held-out RMS within
0.005 of before. Regression test: a misregistered synthetic JPEG.
wgpu's default DX12 compiler (Auto) loads whichever dxcompiler.dll the DLL
search path finds first. LightCraft ships none, so it picked up another
program's copy; one without dxil.dll beside it (e.g. DXC 1.7) warns that
the DXIL is unsigned, wgpu treats that as a compile error, its
indirect-validation pipelines fail, the device is lost and the window
never opens ("Parent device is lost", exit code 1).
Every wgpu instance (window and both compute devices) now uses
lightcraft_gpu::backend::backend_options(): wgpu's env options with the
DX12 compiler pinned to FXC (d3dcompiler_47.dll, part of Windows), unless
WGPU_DX12_COMPILER asks for another.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Renders a raw's DNG ProfileGainTableMap (Apple ProRAW's local tone mapping)
when the photo's Profile option "Camera local tone mapping" is on
(`profile.camera_local_tone`, off by default: Lightroom Classic renders
ProRAW without it). Built on #427's parser; supersedes the decode-time
applier of the first version of #273.
- raw/gaintable: GainTableMap::gain / evaluator (GainEval) per DNG 1.7.1:
bilinear between tables with edges replicated, input clamp(weights .
(R,G,B,min,max))^gamma in linear ProPhoto after the baseline exposure,
index input x MapPointsN clamped to the last point. Saturating cell
math; maps whose sizes don't match their gains aren't evaluated.
SourcePlacement: where a developed source sits in the active area.
- pipeline/local_tone: the gain per output pixel in the scene-linear
stage, before the white balance, mapped back through the frame (crop,
user orientation, warp) and the EXIF orientation. lin_needs_cpu routes
the stage to the CPU when it's on (CPU and GPU match); lin_key includes
it. SourceInfo::local_tone carries the map from the decoder.
- develop: Profile::camera_local_tone (omitted from JSON when off, so
existing settings and their hashes are unchanged); Profile row checkbox
when the source has a map; translations.
- RENDER_CACHE_VERSION 17. Docs: parity row and What's New as an opt-in.
Off renders pixel-identical to main on two iPhone 15 Pro ProRAWs (12 and
48 MP). On adds ~60-75 ms to the scene-linear stage at 1536x2048 on a
2-core VM, the same for both files (cost follows output pixels).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VFqow2P1EtDxt6nRjjQoTA
An odd-height adaptive QP map (EOS R7: 4732 sensor rows, 1183 QP rows)
was rejected as unsupported, so R7 C-RAW files opened from their embedded
JPEG. The map decodes to the exact end of its entropy stream; the last
row of the second-level high-frequency bands has no partner row and its
QP is used alone. Even-height maps never reach this rule, so the six
verified M50/R100/R8 fixtures are unchanged.
Checked on paired R7 RAW and C-RAW captures (ISO 100 and 6400): all
six C-RAW files decode, developed images match their RAW counterparts
visually, and ISO 6400 sensor means agree within 0.1%.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Gs6roPby7THvteijZwptQt
1.Added Simplified Chinese font support for web and desktop builds.
2.Kept Inter as the default font, with Chinese used only as a fallback.
3.Verified Chinese glyph tests and a macOS universal build.
Signed-off-by: supper_yijie <syj794844854@163.com>
Samsung SRW raws whose raw IFD (private compression 32769 or 32770) stores the samples uncompressed are decoded from the sensor data: 12-bit samples packed two in three bytes (bit order told apart from the samples; NX5, NX10, NX11 and NX20, NX200, NX210, NX1000, NX1100) and 16-bit little-endian words (EX1, WB2000). CFA layout from the raw IFD's CFAPattern; framing, white balance, black and saturation levels from the maker note (value offsets relative to the note; the vectors are stored offset by its EncryptionKey); a one-direction Exif picture size crops to the centre of the framing; black from dark rows or columns when the file states none; saturation plateau below the stated level wins. Compressed codings (32770 with fewer bytes, 32772, 32773) stay preview only with that reason. srw is imported from folders; SRW takes the file-local camera look. RENDER_CACHE_VERSION 17.
One config-dir helper (engine::config::config_dir; camera_profiles re-exports it) with both
the face-models and denoise-models defaults; hosts set up both model folders; Settings has
Faces and AI Denoise tabs; both command sets registered; both model dialogs; locale entries
from both; one [features] table per app manifest; Cargo.lock regenerated by cargo; the
DecodedSource cache cost counts both segmentation mattes and the denoised twin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TIFF raws that describe a full-resolution CFA IFD with DNG's tags (levels, crop, AsShotNeutral) but carry no DNG version tag are read by the DNG reader (RawFormat::CfaTiff, dng::decode_as). RGGB when the file states no CFAPattern. Lossless JPEG scans with a predictor selection value above 7 are rejected with that reason and stay preview-only. .3fr and .fff are imported from folders. RENDER_CACHE_VERSION 17.
Decode every JPEG XL tile with wide (32-bit) modular buffers: the
modular_16bit_buffers header flag does not hold on real lossy files (68
of 108 tiles failed with narrow buffers).
Lossy (XYB) tiles are taken from the decoder as linear sRGB primaries
and restored to the declared primaries with a plain 3x3 matrix, instead
of the decoder's gamut-mapped, [0, 1]-clipped conversion. Lossy tiles
whose declared encoding cannot be restored faithfully (ICC profile,
non-linear transfer function, non-D65 white point, intensity target
above 255 nits, single plane) are unsupported. Lossless output is
unchanged.
A JPEG XL tile that fails to decode is now an error for the image
(the file falls back to its embedded preview) instead of a zero tile.
Render cache version 17.
The worker binary gets the never-crash deny list and forbid(unsafe_code) like
every production crate root. docs/ai-masks.md spells out who can reach the
unauthenticated loopback listener.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
