A raw shot in a monochrome picture style records full colour, but its
camera JPEG is grey: neither the full look nor the partial look has
colour to fit, so the photo started from the spectral matrices or the
neutral fallback with the default tone curve, about 1.3 EV darker than
the same body's colour-shot photos. The grey JPEG still shows the
camera's tone curve.
When no look was fitted and the JPEG is black and white (`monochrome`),
fit the quantile tone curve alone on top of the colour the photo gets
otherwise: the camera profile's (in `fit_preview`), else the spectral
matrices or the fallback (`monochrome_look`, after the spectral step).
The chroma curve stays neutral; the partial look's checks apply. A
tone-only look keeps the file's colour model for white balance.
LOOK_VERSION 2 -> 3, RENDER_CACHE_VERSION 42 -> 43.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View > Export Slideshow... (and Export PDF / JPEG / Video in Settings >
Slideshow) writes the photos in view as their composed slides, between
the intro and ending screens that are on:
- PDF: a page per slide (1024/1920/3840 px long side, JPEG quality),
/Dur and /Trans fades per page, optional /PageMode /FullScreen. The
contact sheet's writer moves to engine/src/pdf.rs and streams to disk.
- JPEG: <name>-001.jpg... in a folder.
- Video: AV1 (rav1e, speed 10, low latency) in MP4 or WebM written by
our own muxers (codecs/src/video.rs); fades rendered as blended frames,
held slides one key-frame sample with a long duration; 720p/1080p,
24/30 fps; no audio; capped at 2 hours.
slideshow.export runs in the background with a row in the activity
stack (activity.cancel stops it); outputs are written as .part and
renamed when complete, so cancel or failure leaves nothing behind. A
photo that can't be rendered is skipped with a warning.
slideshow.exportStatus reports the result.
A slideshow template is the Playback (not "prepare previews"), Layout /
Options / Backdrop, Overlays and Titles settings as one versioned JSON
document (format lightcraft.slideshowTemplate, version 1).
- Engine: slide_template (SlideLook, Template, built-ins, user template
files in <settings>/slideshow-templates read through each section's own
merged() validation; size and count caps; newer versions refused; bad
files reported and skipped; file names sanitised so ids never leave the
folder). Applying replaces the four settings in one step and keeps the
replaced ones as "previous" for the session (prefs have no undo).
- Five built-ins of our own: Plain Black, Gallery Wall, Edge to Edge,
Cinema Wide, Shooting Data (no Lightroom names or designs, no images).
- Commands slideshow.templates.list/apply/save/update/rename/delete/
import/export; slideshow.preview {template} previews without applying.
- UI: Template Browser at the top of Settings > Slideshow (built-in, user,
previous settings; click applies, hover previews on the selected photo,
right-click update / rename / export / delete; save and import), file
dialogs on the desktop; strings in the nine locales.
- Docs: parity row (partial), whats-new, control protocol and MCP.
The CRX 0x200 QP map opens with its first symbol as a 32-bit literal; every
later symbol is Rice coded with a limited-length escape: 23 zeros, the
terminating 1 and the symbol in 8 bits (the ITU-T T.87 layout for a 32-bit
limit and 8-bit symbols, without its minus-one offset). The old rule (an
escape after 16 zeros with a 16-bit literal) matched only the first symbol,
which is all the R8 and R7 maps need. R5 Mark II maps (QP 150-162) jump by up
to 12 where the Rice parameter is 0, giving 18- to 22-zero prefixes that
misparsed ("Canon CRX adaptive QP value -21087"): 174 of 306 sampled files
from a private R5 Mark II library opened as previews. Every QP map of its
33,665 C-RAW files now decodes to the exact end of its entropy stream; the six
oracle fixtures are unchanged. Established by black-box analysis of the
bitstream; no third-party decoder source consulted.
Adds the four CC0 R5 Mark II samples (raw.pixls.us 7881-7884) to the corpus
with pinned sensor hashes (the crop-mode framing is left to #754), bumps
RENDER_CACHE_VERSION to 43, and updates cr3.md, raw-parity (235 verified
models), coverage, gaps, the checklist rows, ROADMAP, target-app-parity and
What's New.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rebased onto the activity stack (#601). An export adding its files to
Photos keeps its row through that step, with "Adding to Apple Photos…" as
the detail. The worker turns the row's ✕ off (TaskHandle::set_cancellable)
before its last look at the cancel flag and reports what it saw, so a
cancel either stops the export before Photos is asked or is refused, never
both "cancelled" and imported. activity: a per-task gate orders a cancel's
decision against a step switching cancelling off, so a cancel can't be
accepted between the switch and the step's look at the flag and then be
ignored. An import of its own (export.addToPhotos, or
the Photos step left running after a foreground app.export) holds a row of
kind applePhotos while Photos works: no ✕, no count, the album as detail.
The desktop app refuses export.addToPhotos {wait: true}: its window's
thread never waits for Photos. The label is in every catalog; tests assert
the rows, the refused cancel and the refused wait.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Ten minutes plus five seconds a file per import (was one minute): the
first live run timed out while macOS's permission prompt was still up,
and Photos' duplicates question waits for a person too.
- Files go to osascript 200 at a time, all within the import's one time
limit: one run with every path went over macOS's 1 MiB argument limit
at about 10,000 files, and Photos got nothing. A failed later batch says
how many files Photos had added.
- The progress line "Adding to Apple Photos…" is translated on the UI
thread; on the export worker it was always English.
- docs/apple-photos.md: who can add what (the control port is reachable by
any local program, other users' included), batching, the new limit, and
tested end to end (macOS 26.6.2, Photos 11.0, packaged app). The parity
row says so; What's New has an entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Export dialog gets "Add to Apple Photos" with an optional album (macOS
only). app.export takes addToPhotos / photosAlbum (dialog, Export with
Previous, presets, MCP, lightcraft-cli run and render --opt); the new
export.addToPhotos {paths, album?, wait?} adds files already on disk and
export.photosImports {job?} reports how imports went.
A constant AppleScript run by /usr/bin/osascript asks Photos' import
command (Apple Events, not synthetic input) to import the files into a
top-level album of exactly that name (made when missing; albums in folders
are never used; several of that name: refused), skip check duplicates
false, and returns the media item ids. Album names and paths are passed
only as separate arguments (on run argv), never spliced into the script.
The runner is injectable (Session::apple_photos): with_fs installs the real
one on macOS only, and tests use fakes, so no test starts osascript or
Photos.
Imports are jobs (Session::apple_photos_imports), one at a time. The
desktop app (Session::apple_photos_background, set in open_session) never
waits for Photos on its UI thread: the background export adds on its
worker, app.export without background and export.addToPhotos answer with
the running job, and the app announces the outcome. Without a window (MCP,
lightcraft-cli) imports wait by default, and both headless front ends (the
MCP/CLI backend and the snapshot UI) wait for a running one before the
process ends, on every exit path, through one engine helper
(Session::wait_for_photos_imports) whose deadline follows the job: a
writing allowance while an export still writes, then the import's own
time limit from when Photos was asked, under an overall cap. A runner that panics, waiting or on a
worker, ends its import as failed and frees the slot (panic guard plus a
completion guard). Session::after_export reserves
the import slot before an export writes anything and frees it on every
exit path (handed the files, cancelled, failed, dropped), so a competing
import is refused with the export's job number instead of the export
failing its Photos step after writing. Permission (-1743), missing Photos,
cancel, timeouts, ambiguous albums, busy imports, other osascript failures
and partial imports produce actionable messages; the export's files are
kept either way. Hidden on other platforms; the web build compiles it out.
Packaging: the hardened-runtime entitlements gain
com.apple.security.automation.apple-events (app and CLI) and Info.plist
gains NSAppleEventsUsageDescription, without which macOS refuses the
events without asking.
Not yet tested end to end against a real Photos library: manual steps,
with the packaged app, in docs/apple-photos.md. Parity row LR-EXP-PHOTOS is
now partial.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Open Library given a Lightroom Classic catalog folder, one of its .lrdata /
.lrcat-data folders, Backups/, the .lrcat or its -wal/-shm/.lock files used to
create an empty LightCraft library inside Lightroom's folder (or, for the
.lrcat file, close the current library and then fail). Now:
- engine: lightroom_folder::lightroom_catalog_at (names only, top-level scan
bounded to 10 000 entries, never fails); Session::open_library refuses those
places with EngineError::LightroomCatalog {path, catalog} before creating
anything. A LightCraft library (catalog.snap / catalog.log) always wins.
- app: app.openLibrary checks before closing the current library, keeps it,
returns {opened: false, lightroomCatalog, path} and shows a dialog with
Import Lightroom Catalog… (file.importLightroom with the catalog found) and
Cancel. The library problem window gets the error instead.
- Lightroom import status keeps the catalog path after the task ends.
- CLI --library explains how to import instead.
Intro and ending title screens (Lightroom Classic's Titles panel): each on
or off, a background colour and, centred, the Overlays identity plate or a
line of text, in the plate's colour or an override colour, at a scale, for
its own duration (default: the slide duration).
- Playback timeline: titles are items (Item::Title) of Playback; the intro
plays once before the first photo, the ending after the last photo when
repeat is off; random order never moves them; arrows step across them;
fades, pause and readiness work as for slides; n of N counts photos only.
- Engine: slide_title (TitleSettings in prefs.json, TitleCompose drawing
through the slide composer and overlay text renderer), slideshow.titles
get/set, slideshow.preview {title}.
- UI: titles composed on a render worker (Renderer::request_title), the
control bar shows Intro / End, Settings > Slideshow > Titles section and
a Photo / Intro / Ending preview choice; strings in the nine locales.
- Docs: parity row (partial), playback note, whats-new, control and MCP.
Compare and Reference drew each pane from a whole-frame render of at most
2560 px, so 1:1 was a magnified preview and focus could not be checked.
Each pane now also renders the window on screen from the photo's own
pixels (Slot::CompareRegion), as the loupe does (#323). The media cache
keeps up to two full-size originals while either view is open, so one
pane's window does not evict the other's source.
Docs: gaps.md entry 4 shrinks to overlays and soft proofing; checklist
LR-VIEW-ZOOM / LR-VIEW-COMPARE and ui-parity zoom row updated.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UyHnpE9573a7nJFQqnGNex
Lightroom's Light panel "HDR" switch (`crs:HDREditMode`, `1`/`True` on,
`0`/`False` off) now sets `hdr.enabled` when importing XMP sidecars, presets,
DNG presets and Lightroom catalogs, instead of being reported as unmapped (an
off value was already silent). The rest of the HDR settings keep their
defaults. Follow-up to #646, ported from #466.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR editing is switched with an HDR button in the Edit panel header, beside
Auto and B&W and drawn the same way (the shared text_button: highlighted
while on), instead of a checkbox at the top of the Light panel. While HDR is
on, the Light panel still shows Visualize HDR and the headroom slider above
the light sliders; with HDR off they're hidden.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An HDR edit's preview shows its SDR rendition, so its histogram said nothing
about the highlights above SDR white. Now it shows the HDR rendition:
`pipeline::hdr_histogram` renders the edit small (384 px, float HDR, same
framing) and bins it with SDR on the left half and the HDR range on the right
(`Histogram::of_hdr`, `HdrBins`), on a fixed scale of Hdr::MAX_EV_LIMIT (5)
stops above SDR white so it doesn't rescale when the headroom limit changes.
The engine's `develop()` (CPU and GPU renders) and the web worker swap it in
for HDR edits; high-bit-depth, windowed and proofed requests keep the image's
histogram, and a display profile's histogram doesn't replace it. Web workers
carry the HDR bins across their wire (`Histogram::to_words` / `from_words`).
The panel draws it in Lightroom's layout: a solid line at SDR white, dashed
lines between the stops, the headroom limit as an orange line with the range
past it dimmed, a bar under the plot (white; one band per stop in Visualize
HDR range's colours while that is on), SDR / HDR labels and an info tooltip.
Follow-up to #646, ported from #466.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With HDR output on, a photo edited in HDR exports as a 16-bit PNG with the PQ
curve in Rec. 2020 (SDR white at HDR_REFERENCE_WHITE_NITS), described by a
`cICP` chunk (PNG third edition: BT.2020 primaries, PQ, RGB, full range) and
a `cLLI` content light level chunk (the levels the HDR AVIF records). EXIF,
XMP and print resolution are kept; no ICC profile next to cICP. Photos without
an HDR edit, and HDR edits with HDR output off, export as before.
`codecs::encode_png_pq` sits next to `encode_avif_pq` and takes the same
input. Follow-up to #646, ported from #466.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ROADMAP.md: take main's restructured version; JPEG XL export is now
recorded in docs/file-format-parity.md and docs/gaps.md (gap 25).
Co-Authored-By: Claude <noreply@anthropic.com>
The crop tool's rotate pointer always bulged up, which only reads right
above the box. It now turns to bulge away from the nearest point of the box
outline: right beside the right edge, down below it, left beside the left
edge, diagonally off a corner, and following a box that is already rotated.
icons::paint_turned draws an icon turned about its centre; icons::paint is
unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A watermark (text, horizontal or vertical, or a graphic) can be turned 0,
90, 180 or 270 degrees clockwise, like Lightroom Classic's rotate buttons.
It is sized before it is turned and placed and inset by the turned box; the
shadow still falls down and to the right. New watermark key `rotation`
(other values are errors); settings without it draw unturned. The Export
dialog gets a Rotate row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Watermark.inset becomes inset_x (from the left or right edge) and inset_y
(from the top or bottom edge), like Lightroom Classic's watermark editor.
The watermark keys are insetX and insetY; the old inset key still reads as
both, so saved presets and existing MCP calls keep working.
The Export dialog's Inset slider becomes Horizontal inset and Vertical
inset, each greyed out when the position is centred along its axis.
cargo fmt reflows WM_POSITIONS and its test from the previous commits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Watermark on, the Export dialog shows the first photo it will export
(its cached thumbnail) with the watermark drawn as the file will have it.
The watermark is redrawn on a copy only when it or the output size changes.
draw_watermark_preview scales the 6 px minimum text size and the 1 px
minimum shadow offset by the preview size over the export size, so a small
watermark doesn't look bigger in the preview than in the file. Exports draw
with a scale of 1 and are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In the side-by-side and top/bottom Before/After layouts a click in the
Before view was mapped to image coordinates through the After view's
rectangle, so the White Balance Selector sampled the wrong point (at Fit,
the photo's edge). The click tools in general_interaction now use the
Before view's image rectangle when the pointer is in the Before view's
pane; the pane decides, since zoomed in an image reaches past its pane.
New headless test tests_before_after.rs clicks the same image point in
the After and Before views (side by side, top/bottom; Fit and 100 %) and
expects the same white balance. Without the fix: Before 8202 K / +116,
After 2710 K / +33.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In Compare a filmstrip click made the clicked photo active without
showing it, so the Edit panel and the rating keys acted on a photo on
neither side (a headless test rated the hidden photo 2 -> 3 stars). The
click now puts the photo into the active side (the candidate after
entering Compare, the select after clicking the select's photo); a photo
already on the other side swaps the two. The active photo is always one
of the two shown. Other views keep the usual selection clicks.
New UI command compare.set {id, side?: "select" | "candidate"} for the
same through the control channel and MCP.
New headless tests in tests_compare.rs: the active photo stays on screen
and no hidden photo is rated (Fit and 100 %), and replace / swap /
explicit side / unknown side.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The White Balance Selector button in the Edit panel only armed the tool,
so in Compare (which doesn't handle on-image tools) it did nothing while
W opened the photo in Detail with the selector armed. The button now runs
tool.wbPicker like W; a second click still disarms it.
New headless test tests_wb_selector.rs clicks the button in Compare and
expects Detail with the selector armed on the photo that was active; it
fails without the fix (the view stays Compare).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Color Grading gets 3-Way / Shadows / Midtones / Highlights tabs (3-Way by
default). 3-Way shows three equal wheels; a range tab shows one large wheel
with that range's Hue, Saturation and Luminance sliders. Blending and Balance
are in every tab.
Precision (#559):
- Shift-drag on a wheel locks the hue and changes saturation only; the whole
spoke is drawn as a guide. Shift can be pressed or released mid-drag.
- A white dot marks each wheel's neutral centre.
- The large wheel has dashed 25/50/75 % saturation rings.
- 3-Way shows the hovered wheel's hue and saturation above it.
Each wheel has an eye (bottom-left, on hover) that hides its effect for
viewing only: RenderJob::with_hidden_grading renders those wheels neutral
under their own key, never cached as the photo's preview. Not an edit, not
saved, reset on another photo; export is unaffected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
view.back (Esc) closed dialogs, the keyword painter, full screen and an
armed on-image tool, but not the crop tool (a right panel, not
app.ui.tool), so Esc with the crop tool open went straight to the grid.
It now closes the crop tool like C does (the crop stays); the next Esc
goes back to the grid.
Esc that ends an edit in a text field (the crop tool's Angle field) also
ran Back: egui drops the field's focus as Esc arrives, before
shortcuts::handle checks egui_wants_keyboard_input(). The app now
records whether a text field had the keyboard at the end of the last
frame (LightcraftApp::text_focus); that Esc is then left to the field,
like one that closes a popup.
New headless tests in tests_crop_tool.rs; both fail without the fix
(the existing escape_in_the_angle_field_keeps_the_angle fails with only
the crop step).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The frame dropped the flips together with the crop (flip_h: apply_crop &&
...), so the crop tool's uncropped view (render and screen <-> image
mapping) ignored Flip H / Flip V until the tool was closed. A flip isn't
part of the crop: the frame now keeps it without the crop. Cropped
renders and exports are unchanged.
The crop overlay's dimming paired the photo's corners with the crop
box's corners in data order; flipped, the box reaches the screen
mirrored and the photo was dimmed inside the box. It now takes the box's
corners in screen order (flipped_corners). Box, handles, drags and guides
already go through the frame's mapping.
Tests: geometry uncropped_frame_keeps_the_flips (fails without the fix)
and detail flipped_crop_box_corners_come_in_screen_order; headless
screenshots for H, V and H+V checked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Engine: slide_overlay (OverlaySettings in prefs.json, the new slideshow.overlays
command): identity plate (text, or a PNG/JPEG file with its transparency; size,
colour, opacity; render behind image), rating stars (own vector stars), up to 16
text overlays with tokens ({caption}, {exposure}, {file}, {date}, {focal}… plus
every rename token; unknown tags show as typed and are reported) and a drop
shadow, each at one of nine anchors of the slide or photo plus an offset, kept on
the slide; the export watermark on the photo. Sizes relative to the slide's
shorter side; validated and clamped.
- Drawn by the engine as a second pass over lightcraft_slideshow::compose_with
(new behind hook for "render behind image"); the watermark's text renderer moved
to engine text.rs (TextLayout, Inter + craft-fonts CJK) and is shared; glyphs
off the image are skipped so huge text stays cheap.
- rename::expand_tokens_with lets overlays add tokens without changing rename.
- Playback composes slides when overlays are on; slideshow.preview returns each
overlay's box. Settings > Slideshow > Overlays section with live preview.
- Docs: parity row (partial), whats-new, control/MCP docs, nine locale catalogs.
- Tests: tokens, nine anchors, star count, plate image opacity and missing file,
text shadow, resolution independence, hostile input, big-slide cost, CJK with
craft-fonts, prefs persistence, preview and headless playback pixel checks.
Zoomed in, each view's photo reaches past its pane. The whole-frame renders
were drawn unclipped (only the window renders were clipped to their pane),
so the After's magnified whole-frame render covered the Before pane's margins
and the gap between the panes with a blurred picture, and the Before side
looked like it didn't fill its pane. Both whole-frame renders are now clipped
to their pane, like the windows over them; the Before / After labels stay
under the pane instead of moving off screen with the photo's bottom edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- `lightcraft_denoise::remote`: protocol v1 over TCP (JSON lines + byte-shuffled,
deflated half-float tiles), a `Remote` client (connection pool, four slots,
greeting checks the model's SHA-256 and tile size, gives up after three failed
tiles) and `serve` (shared token compared in constant time, size caps including
payloads that inflate past their tile, connection limit, timeouts).
- Engine: with LIGHTCRAFT_DENOISE_URL / LIGHTCRAFT_DENOISE_TOKEN set, the loaded
model greets the server on first use and adds its slots to this computer's
tiles at once; a tile goes to a free server slot, else runs here, and a tile
the server fails runs here too. `denoise.status` → `device.remote` says where.
- `lightcraft-cli denoise-serve` serves the installed, selected model on this
computer's card (checked against the CPU, as in the app) or CPU.
- docs/denoise.md: setup, safety (unencrypted: VPN/LAN only) and the protocol.
Tested: protocol round trips, refusals (token, model, tile size, hostile
payloads), fallback and give-up; the engine model with a live, a mismatched
and a dead server; the CLI binary serving a synthetic model end to end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- New crate lightcraft-slideshow (L1, no UI): SlideSettings (margins linked or
independent, guides, aspect preview, zoom to fill, stroke border, cast shadow,
backdrop colour, colour wash, background image; lengths relative to the slide's
shorter side; validated and clamped) and a CPU compose() used by playback, the
Settings preview and slideshow.preview.
- Engine: slideshow.layout (partial merge, saved in prefs.json) and
slideshow.preview {id?, width?, height?, path?} (PNG to path or base64);
RenderJob::with_slide composes on the render worker; the background photo is
rendered once and shared.
- Playback: with a non-default layout each slide is the composed screen-sized
slide, prepared ahead like before; the default layout plays as before.
- Settings > Slideshow: Layout, Options and Backdrop sections and a debounced
live preview of the active photo's slide (with margin guides).
- Tests: composer geometry/pixels/hostile input, command get/set/persist/preview,
headless playback of a composed slide and of the default layout.
The 2668-entry table read off the black-box oracle's output is gone.
arw6_curve.rs now builds the 4096-entry table at first use from our own
measurement: piecewise linear through knots u_k = 128 k, c_k = u_k for
k <= 11 and 356.89 + 655.646 ln(k - 6) above, rounded half up, fitted to
the 7 same-exposure lossless (LJ92) / ARW6 pairs of the CC0 ILCE-7RM6 set.
A unit test pins the whole table (sum 27776336, weighted 92792980288),
its anchors, the identity through 1408 and strict monotonicity.
The corpus sums become regression values of the new output; the 12-bit
codes before the curve stay verified against the oracle (Phase 0).
docs/arw6-compression.md describes the curve, how it was measured, its
uncertainty, the structure and x2-scale evidence, why it is not in the
file, and the after-the-fact comparison with the oracle's curve; the
tracker and docs no longer call the output bit-exact against LibRaw.
Co-Authored-By: Claude <noreply@anthropic.com>
