Found while testing crates/catalog/src/dates.rs:58 (normalize_iso), used by crates/engine/src/cmd/manage.rs:201
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Found while testing crates/catalog/src/dates.rs:52 (shift_iso, tail = iso.trim().get(19..)); used by crates/engine/src/cmd/manage.rs:222
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
`tests_staging` holds one `#[cfg(unix)]` test (#1502), so on Windows its
`use super::*` is unused and `cargo clippy --workspace --all-targets -- -D
warnings` (the clippy step of `cargo xtask ci`) fails in lightcraft-catalog.
Gate the module itself on Unix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Canon EOS R6 Mark II writes its Exif model as 'Canon EOS R6 Mark II', which failed the spectral camera table lookup because the table registers the model as 'EOS R6m2'. Add the alias mapping and regression unit tests in lightcraft_raw and lightcraft_catalog.
Resolved against rb-base-36: Scanned keeps the base's rewrite flag next to magic and tag; Exif keeps the Panasonic lens fallback; locale catalogs merged (one duplicate key dropped).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
import_reads_files_off_the_ui_thread_and_can_be_cancelled: the probe was
a 150 ms sleep judged by a 300 ms wall-clock frame budget, which the
loaded FreeBSD QEMU VM can miss. It now waits on the sleeping-NAS gate of
tests_offline, which can also let a counted number of reads through:
frames must go on while every read is held (a watchdog records a frame
that waited), one batch is let through and joins the catalog, then
Cancel and wake: the files being read finish and nothing new starts.
compare_at_one_to_one_gets_a_sharp_window_per_pane ("both originals stay
decoded"): the media cache takes its budget from the process-wide memory
budget, which settings_dialog_by_keyboard_and_clicks sets to 1 GB for a
moment (and left there when it failed on FreeBSD). That leaves a 512 MiB
share, too small for two 24 MP originals (288 MB each), so one pane's
was evicted. compare_at now gives its session the default 768 MiB share;
LIGHTCRAFT_MEMORY_MB=1024 reproduces the failure without this.
dropping_the_lock_frees_the_library_while_another_thread_spawns_processes:
"the spawning thread never got a child off the ground" when a spawn took
longer than the 2 s of lock cycles. The cycles now go on until at least
5 children were spawned during them (at most a minute).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The left panel shows a count beside every album. Each catalog revision had
every album counted again, and a smart album's count asks every photo of
the library whether its rules hold: one pass over the library for each smart
album after each keyword, rating or slider tick (about 25 ms an album in a
library of 67,000 photos).
`AlbumTally` (`crates/catalog/src/tally.rs`) keeps the counts and, for each
smart album, which photos it holds. After a small edit each smart album asks
only the photos the edit touched (`Catalog::touched_since`); an album of
chosen photos is counted again only when a photo came, went or was deleted.
Counted from every photo as before: new rules, a change to an album, a stack
or the keyword list, an edit to more than 256 photos, another library, and
each new minute while an album asks about "the last N days".
What an album remembers is in proportion to the photos it holds: a bit a
photo id while ids are close together, a set when they are far apart.
The frame after a keyword in that library, both side panels open: about
54 ms -> 27 ms (156 ms before #1660).
Tests: 900 random edits against eight smart albums (keywords, flags,
ratings, labels, sliders, capture dates, file names, an album of chosen
photos) and an ordinary one, the followed counts compared with
`album_count` after each; a delete followed, three hundred photos counted
whole; the members' bits at the edges and for ids far apart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Everything derived from the catalog was keyed on its revision, which every
op raises. So each edit (a keyword, a rating, every tick of a slider) had
the grid's list queried and sorted again from every photo, the source
counted by a second full query, and the side panels tally the whole library
again. In a library of 67,000 photos the frame after one keyword took about
156 ms with both side panels open (an idle frame: 2 ms).
The catalog now remembers which photos its latest ops touched and what of
them they changed (`Catalog::touched_since`, `aspects_since`, `Aspects`). It
answers "not known" for an op that changes more than photos of its own (an
album, a stack, the keyword list), for changes too long ago, and for a
revision it did not make itself (a library just loaded).
- The view (`Session::visible`): when the same view is asked again after a
small edit, the photos the edit touched are taken out of the list it had,
asked about again, and put back at their place in the order
(`Catalog::follow`). 37 ms -> 0.6 ms. Worked out whole as before: more
than 256 photos touched, a change that is not photos' own, an album in its
own order, Recently Added, Missing Photos, and a view that asks about "the
last N days" (it changes with the clock too).
- The source's count: taken from the list when no filter is set, else
counted without sorting (`Catalog::count`). 37 ms -> 0.
- The side panels (`Caches`): the folder tree, keyword tree, date groups,
people's names and library counts are kept through an edit that changed
nothing they read. A rating or a slider changes none; a keyword leaves the
folders, dates and counts.
The frame after a keyword: about 156 ms -> 54 ms with both side panels
open, 71 ms -> 2 ms with the grid alone (`tests_view_cost.rs`, a synthetic
library, run with --ignored --nocapture).
Still paid on each edit: the count beside every album and smart album in the
left panel (about 25 ms for a smart album there), and the filter bar's lists.
Tests: 1,440 random edits of every photo-local kind across sources, sorts,
filters and the hold, each compared with the list worked out whole; 600
random edits comparing every kept tally with a fresh one; the clock; the
record itself, with its failure paths. `ui.inspect` -> `perf` reports
`viewFollowed` and `viewWorkedOut`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A view is asked again after every edit, so a photo that an edit makes stop
matching it leaves the grid at once and every photo after it moves up: a
keyword given in a smart album of photos without keywords takes the photo
away from under the cursor, and in a random order, with no landmarks, the
shift reads as a new shuffle (the seed does not change).
View > Hold View Until Refreshed (`library.holdView`, off by default, kept
with the library's preferences): a photo the view shows stays in it when an
edit makes it stop matching a smart album's rules, Picks or the filter bar.
View > Refresh View (`library.refresh`, also in the sort menu while the hold
is on), Reshuffle, another source, filter or sort, or new rules for the
smart album shown, shows what matches now.
- Photos that start matching still appear at once.
- A photo that is deleted, or taken out of the album or folder shown, still
leaves at once: a held photo has to be where the view looks
(`Catalog::query_keeping`, `within`).
- A source with no filter over it holds nothing and is queried as before.
- A refresh keeps the seed.
- The grid's count no longer reads "3 of 2" when a held view shows more than
now match its source.
Each edit still asks the whole library again; that cost is not addressed
here.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Photo ▸ Photo Merge ▸ HDR for Each Bracket Set (`merge.hdrBatch`) merges many brackets in one go with the last HDR
options, as Lightroom merges a selection of stacks: one HDR per stack among the photos, then per bracket among the
unstacked ones (`Catalog::bracket_sets`: photos taken less than about a second after the previous one's shutter
closed, at exposures at least ½ EV apart; bursts at one exposure and earlier merge results are left out). The app runs
the merges one after the other in the activity stack (cancelling one stops the rest; a failed set doesn't); the
command runs them inline for the CLI and MCP (`lightcraft-cli merge hdr-batch FILES…`) and reports merged and failed
sets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Catalog format v9 adds Photo.preview_checked and Op::SetContent.preview_checked:
the app version (CARGO_PKG_VERSION) whose decoder set preview_only, empty when
it isn't set. Import and content_op (Reload, Relink) stamp it; undo swaps it
back. Catalogs from before v9 read an empty stamp, so their preview-only photos
count as stale (Photo::preview_only_stale) and will be rechecked once.
The version guard test now also accepts a format version that only adds fields.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Read the autofocus point from Sony maker notes (FocusLocation 0x2027, FocusFrameSize
0x2037, FocusMode 0x201b, AFAreaModeSetting 0x201c, AFTracking 0x2021 and the area mode
used from the enciphered 0x9402 block), for the ILCE-1 and ILCE-7SM3, whose layout was
checked against ExifTool's output on 333 real ARWs. Manual focus, centre-only Multi
reports and unchecked bodies give no point. The box is stored on the upright photo as
Meta.focus (omitted when unknown; no catalog format change), filled at import and by
Reload from Disk.
View > Show Focus Point (Alt+F) draws it in Detail, Compare and Survey through rotation
and crop; View > Zoom to Focus Point (on by default) makes Toggle Zoom centre on it; the
Info panel shows "AF-C · Wide · Animal Eye Tracking". photo.inspect returns meta.focus.
Held-out and library-wide calibrate runs on real CR3s (calibrate's CR3 /
CR2 input is #1073): profiles change little (R7 2.52 -> 2.57, R6 Mark II
6.12 -> 6.09 mean dE), so none is bundled; notes the CRX adaptive QP
172/175 files that stay preview-only. The catalog test pins that an EOS
R6 Mark II (Exif "Canon EOS R6m2") edits in Kelvin through its measured
matrices and an EOS R7 stays relative.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CzWyUn77ZWLe3q3qMiQbVt
A photo browsed in a Local folder is flagged deleted by photo.delete, but
Filter::matches_in dropped every browsed photo from views without a folder,
so it vanished from the folder and never reached Recently Deleted: it could
not be restored and sat in the catalog invisibly (a deleted record is also
never forgotten as an untouched Local one).
Deleted browsed photos now match the Recently Deleted filter, so they can be
restored; the library view still excludes browsed photos.
aiongg