merge main into fix/sec-chart-geometry-budgets

- sheet.moveColumns resolved its target sheet from `sheet`, or a
  `Sheet!` range or cell, but its two protection checks were passed
  only the `sheet` parameter, so a qualified range moved columns of
  a protected sheet while the checks authorized the active one. Both
  checks now get the resolved sheet index.
- check_protection compared only cell content, so a sort or duplicate
  removal moving an unlocked cell with equal content onto a locked one
  left the content as it was but made the cell editable. The commit
  check now also refuses a change that leaves a previously locked cell
  unlocked (effective lock, row and column formats included).

apps/gridcraft-cli/src/check/calc.rs

@@ -31,20 +31,41 @@ fn is_volatile(e: &Expr, volatile_names: &HashSet<String>) -> bool {
 }
 
 /// Upper-cased defined names whose formula is volatile, directly or through other names.
+///
+/// Volatility flows backwards along name references: each name is parsed and walked once, and a
+/// worklist carries volatility from a name to the names that use it. Rescanning every name until
+/// nothing changes was quadratic: a file listing its names so that each pass marked only one more
+/// did one full pass per name.
 pub(super) fn volatile_names(wb: &Workbook) -> HashSet<String> {
-    let parsed: Vec<(String, Option<Expr>)> =
-        wb.names.iter().map(|n| (n.name.to_ascii_uppercase(), gridcraft_engine::formula::parse(&n.formula).ok())).collect();
     let mut set = HashSet::new();
-    // Each round adds at least one name or stops, so `len + 1` rounds reach the fixed point.
+    // Upper-cased name -> the names whose formulas refer to it.
-    for _ in 0..=parsed.len() {
+    let mut users: HashMap<String, Vec<String>> = HashMap::new();
-        let before = set.len();
+    let mut queue = Vec::new();
-        for (name, e) in &parsed {
+    let none = HashSet::new();
-            if !set.contains(name) && e.as_ref().is_some_and(|e| is_volatile(e, &set)) {
+    for n in &wb.names {
-                set.insert(name.clone());
+        let name = n.name.to_ascii_uppercase();
+        let Ok(e) = gridcraft_engine::formula::parse(&n.formula) else { continue };
+        if is_volatile(&e, &none) {
+            if set.insert(name.clone()) {
+                queue.push(name.clone());
             }
+            continue;
         }
-        if set.len() == before {
+        let mut used = BTreeSet::new();
-            break;
+        e.walk(&mut |x| {
+            if let Expr::Name(r) = x {
+                used.insert(r.to_ascii_uppercase());
+            }
+        });
+        for r in used {
+            users.entry(r).or_default().push(name.clone());
+        }
+    }
+    while let Some(v) = queue.pop() {
+        for user in users.remove(&v).unwrap_or_default() {
+            if set.insert(user.clone()) {
+                queue.push(user);
+            }
         }
     }
     set

apps/gridcraft-cli/src/check/tests.rs

@@ -178,6 +178,28 @@ fn volatile_names_propagate() {
     assert_eq!(check(&wb, &Options::default()).calc.volatile, 1);
 }
 
+#[test]
+fn volatile_names_propagate_through_a_long_chain_in_one_walk() {
+    // Chain0 uses Chain1, Chain1 uses Chain2, ... and only the last is volatile: listed in this order, a rescan
+    // until nothing changes marked one name per pass (quadratic). Every name in the chain is
+    // volatile; a name off the chain is not.
+    const LEN: usize = 5_000;
+    let mut wb = book(&[("A1", "=1", n(1.0))]);
+    let name =
+        |name: String, formula: String| gridcraft_engine::model::DefinedName { name, scope: None, formula, comment: String::new(), hidden: false };
+    for i in 0..LEN {
+        let formula = if i + 1 == LEN { "NOW()".to_string() } else { format!("Chain{}+1", i + 1) };
+        wb.names.push(name(format!("Chain{i}"), formula));
+    }
+    wb.names.push(name("Plain".into(), "Chain0*0+Other".into()));
+    wb.names.push(name("Other".into(), "1".into()));
+    let set = volatile_names(&wb);
+    assert!((0..LEN).all(|i| set.contains(&format!("CHAIN{i}"))));
+    assert!(set.contains("PLAIN"));
+    assert!(!set.contains("OTHER"));
+    assert_eq!(set.len(), LEN + 1);
+}
+
 #[test]
 fn round_trip_of_a_simple_book_is_clean() {
     let mut wb = book(&[("A1", "2", n(2.0)), ("B1", "=A1*3", n(6.0)), ("A2", "x", Value::text("x"))]);

crates/chart/src/raster.rs

@@ -7,6 +7,12 @@ use crate::{Prim, Rgba};
 /// Largest image we allocate (pixels).
 const MAX_PIXELS: u64 = 64 * 1024 * 1024;
 const SUB: usize = 4;
+/// Scan-conversion work one [`rasterize`] call may do: edge tests (an active edge at one
+/// sub-sample) plus covered pixels blended. Edges are only tested on the rows they cross, but a
+/// caller can still pass enough geometry to keep the rasteriser busy for minutes on a small
+/// image; once the allowance is spent the remaining fills are skipped. 2^28 is about a second,
+/// far beyond any chart.
+const MAX_SCAN_WORK: u64 = 1 << 28;
 
 type Path = Vec<Vec<[f32; 2]>>;
 
@@ -15,6 +21,8 @@ struct Canvas {
     h: usize,
     buf: Vec<u8>,
     acc: Vec<f32>,
+    /// Scan-conversion work left (see [`MAX_SCAN_WORK`]).
+    work: u64,
 }
 
 impl Canvas {
@@ -41,7 +49,8 @@ impl Canvas {
 
     /// Fills a multi-contour path with the even-odd rule.
     fn fill(&mut self, path: &Path, color: Rgba) {
-        let mut edges: Vec<[f32; 4]> = Vec::new();
+        // Each edge as [top y, bottom y, x0, y0, x1, y1].
+        let mut edges: Vec<[f32; 6]> = Vec::new();
         let (mut minx, mut miny, mut maxx, mut maxy) = (f32::INFINITY, f32::INFINITY, f32::NEG_INFINITY, f32::NEG_INFINITY);
         for c in path {
             if c.len() < 3 || !c.iter().all(|p| p[0].is_finite() && p[1].is_finite()) {
@@ -54,7 +63,7 @@ impl Canvas {
                 miny = miny.min(p[1]);
                 maxy = maxy.max(p[1]);
                 if p[1] != q[1] {
-                    edges.push([p[0], p[1], q[0], q[1]]);
+                    edges.push([p[1].min(q[1]), p[1].max(q[1]), p[0], p[1], q[0], q[1]]);
                 }
             }
         }
@@ -72,8 +81,26 @@ impl Canvas {
         if self.acc.len() < bw + 1 {
             self.acc.resize(bw + 1, 0.0);
         }
+        // Active-edge list: edges join when the scan reaches their top and leave past their
+        // bottom, so each row tests only the edges crossing it instead of every edge.
+        edges.sort_by(|a, b| a[0].total_cmp(&b[0]));
+        let mut pending = edges.iter().peekable();
+        let mut active: Vec<[f32; 6]> = Vec::new();
         let mut xs: Vec<f32> = Vec::new();
         for py in y0..y1 {
+            while let Some(e) = pending.next_if(|e| e[0] < py as f32 + 1.0) {
+                active.push(*e);
+            }
+            active.retain(|e| e[1] > py as f32);
+            if active.is_empty() {
+                continue;
+            }
+            let tests = (active.len() * SUB) as u64;
+            if tests > self.work {
+                self.work = 0;
+                return;
+            }
+            self.work -= tests;
             for v in self.acc.iter_mut().take(bw) {
                 *v = 0.0;
             }
@@ -81,10 +108,9 @@ impl Canvas {
             for s in 0..SUB {
                 let sy = py as f32 + (s as f32 + 0.5) / SUB as f32;
                 xs.clear();
-                for e in &edges {
+                for e in &active {
-                    let (ya, yb) = if e[1] < e[3] { (e[1], e[3]) } else { (e[3], e[1]) };
+                    if sy >= e[0] && sy < e[1] {
-                    if sy >= ya && sy < yb {
+                        xs.push(e[2] + (sy - e[3]) * (e[4] - e[2]) / (e[5] - e[3]));
-                        xs.push(e[0] + (sy - e[1]) * (e[2] - e[0]) / (e[3] - e[1]));
                     }
                 }
                 xs.sort_by(f32::total_cmp);
@@ -110,6 +136,7 @@ impl Canvas {
             if !any {
                 continue;
             }
+            self.work = self.work.saturating_sub(bw as u64);
             for px in x0..x1 {
                 let cov = self.acc.get(px - x0).copied().unwrap_or(0.0);
                 if cov > 0.0 {
@@ -212,7 +239,7 @@ pub fn rasterize(prims: &[Prim], w: u32, h: u32, background: Rgba) -> Vec<u8> {
     for _ in 0..w * h {
         buf.extend_from_slice(&background);
     }
-    let mut cv = Canvas { w, h, buf, acc: Vec::new() };
+    let mut cv = Canvas { w, h, buf, acc: Vec::new(), work: MAX_SCAN_WORK };
     for p in prims {
         match p {
             Prim::Rect { x, y, w, h, fill, stroke, radius } => {
@@ -274,6 +301,31 @@ pub fn rasterize(prims: &[Prim], w: u32, h: u32, background: Rgba) -> Vec<u8> {
 mod tests {
     use super::*;
 
+    /// Security: each row tests only the edges crossing it. A polygon of 100,000 tiny edges over
+    /// 4,000 rows tested every edge at every sub-sample of every row (1.6 billion tests).
+    #[test]
+    fn many_short_edges_scan_only_their_rows() {
+        let mut pts: Vec<[f32; 2]> = (0..100_000).map(|i| [if i % 2 == 0 { 0.0 } else { 0.5 }, i as f32 * 0.04]).collect();
+        pts.push([2.0, 4_000.0]);
+        pts.push([2.0, 0.0]);
+        let img = rasterize(&[Prim::Polygon { pts, fill: [255, 0, 0, 255], stroke: None }], 2, 4_000, [0, 0, 0, 0]);
+        // The right-hand pixel of every row is inside the polygon.
+        assert_eq!(img.get(4..8), Some(&[255, 0, 0, 255][..]));
+        assert_eq!(img.get(4 * (2 * 3_999 + 1)..4 * (2 * 3_999 + 2)), Some(&[255, 0, 0, 255][..]));
+    }
+
+    /// Security: scan conversion stops once the call's work allowance is spent.
+    #[test]
+    fn fills_stop_when_the_work_allowance_is_spent() {
+        let square = vec![vec![[0.0, 0.0], [4.0, 0.0], [4.0, 4.0], [0.0, 4.0]]];
+        let mut cv = Canvas { w: 4, h: 4, buf: vec![0; 64], acc: Vec::new(), work: 2 * SUB as u64 * 4 + 16 };
+        cv.fill(&square, [255; 4]);
+        assert!(cv.buf.iter().all(|&b| b == 255));
+        cv.buf = vec![0; 64];
+        cv.fill(&square, [255; 4]);
+        assert!(cv.buf.iter().all(|&b| b == 0));
+    }
+
     #[test]
     fn dashed_geometry_stays_within_the_dash_budget() {
         // Forty very long dashed lines, each allowed 10_000 dashes per segment: before the

crates/chart/src/render/cartesian.rs

@@ -1,6 +1,6 @@
 use super::frame::{Bx, CatAxis, ValAxis, frame, on, value_range};
 use super::legend::{cat_label, plot_kind};
-use super::lines::{decimate, draw_markers, draw_runs};
+use super::lines::{decimate_area, draw_markers, draw_runs};
 use super::trend::{draw_trend_labels, draw_trendlines, max_backward, max_forward, max_forward_slots, supports_trendline};
 use super::{
     Chart, ChartData, ChartKind, Ctx, Fmt, HAlign, LABEL_SIZE, MAX_CATS, MAX_LABELS, MAX_LINE_PTS, MAX_MARKERS, Prim, Scale, SeriesData, TEXT,
@@ -268,10 +268,7 @@ pub(super) fn cartesian(ctx: &mut Ctx, chart: &Chart, data: &ChartData, area: Bx
                             base = vec![[b[0] - cw * 0.3, b[1]], [b[0] + cw * 0.3, b[1]]];
                         }
                     }
-                    let top = decimate(top, MAX_LINE_PTS * 2);
+                    let poly = decimate_area(top, base, MAX_LINE_PTS * 2);
-                    let base = decimate(base, MAX_LINE_PTS * 2);
-                    let mut poly = top;
-                    poly.extend(base.into_iter().rev());
                     if poly.len() >= 3 {
                         ctx.out.push(Prim::Polygon { pts: poly, fill: s.color, stroke: None });
                     }

crates/chart/src/render/lines.rs

@@ -54,9 +54,95 @@ pub(super) fn decimate(pts: Vec<[f32; 2]>, max: usize) -> Vec<[f32; 2]> {
     out
 }
 
+/// Decimates the top and baseline of an area chart together at the same horizontal indices so
+/// `area_mesh`'s paired vertical-strip topology (`pts[i]` ↔ `pts[2n - 1 - i]`) is preserved.
+pub(super) fn decimate_area(top: Vec<[f32; 2]>, base: Vec<[f32; 2]>, max: usize) -> Vec<[f32; 2]> {
+    let n = top.len().min(base.len());
+    if n == 0 {
+        return Vec::new();
+    }
+    if n <= max {
+        let mut poly = top;
+        poly.truncate(n);
+        poly.extend(base.into_iter().take(n).rev());
+        return poly;
+    }
+    let mut cols: Vec<[usize; 6]> = Vec::new();
+    let mut keep = Vec::with_capacity(max * 2);
+    let mut i = 0;
+    while i < n {
+        let col = top[i][0].floor();
+        let (start, mut t_mn, mut t_mx, mut b_mn, mut b_mx) = (i, i, i, i, i);
+        let mut k = i + 1;
+        while k < n && top[k][0].floor() == col {
+            if top[k][1] < top[t_mn][1] {
+                t_mn = k;
+            }
+            if top[k][1] > top[t_mx][1] {
+                t_mx = k;
+            }
+            if base[k][1] < base[b_mn][1] {
+                b_mn = k;
+            }
+            if base[k][1] > base[b_mx][1] {
+                b_mx = k;
+            }
+            k += 1;
+        }
+        let entry = [start, t_mn, t_mx, b_mn, b_mx, k - 1];
+        cols.push(entry);
+        let mut idx = entry;
+        idx.sort_unstable();
+        let mut last = usize::MAX;
+        for ix in idx {
+            if ix != last {
+                keep.push(ix);
+                last = ix;
+            }
+        }
+        i = k;
+    }
+    if keep.len() > max * 4 {
+        let max_groups = (max * 4 / 6).max(1);
+        let group_size = cols.len().div_ceil(max_groups);
+        keep.clear();
+        for ch in cols.chunks(group_size) {
+            let start = ch[0][0];
+            let end = ch.last().map_or(start, |c| c[5]);
+            let t_mn = ch.iter().map(|c| c[1]).min_by(|&a, &b| top[a][1].total_cmp(&top[b][1])).unwrap_or(start);
+            let t_mx = ch.iter().map(|c| c[2]).max_by(|&a, &b| top[a][1].total_cmp(&top[b][1])).unwrap_or(start);
+            let b_mn = ch.iter().map(|c| c[3]).min_by(|&a, &b| base[a][1].total_cmp(&base[b][1])).unwrap_or(start);
+            let b_mx = ch.iter().map(|c| c[4]).max_by(|&a, &b| base[a][1].total_cmp(&base[b][1])).unwrap_or(start);
+            let mut idx = [start, t_mn, t_mx, b_mn, b_mx, end];
+            idx.sort_unstable();
+            let mut last = usize::MAX;
+            for ix in idx {
+                if ix != last {
+                    keep.push(ix);
+                    last = ix;
+                }
+            }
+        }
+    }
+    let mut poly = Vec::with_capacity(keep.len() * 2);
+    for &ix in &keep {
+        poly.push(top[ix]);
+    }
+    for &ix in keep.iter().rev() {
+        poly.push(base[ix]);
+    }
+    poly
+}
+
 /// Draws a polyline split at gaps (`None`), decimated when long. With `smooth` (the plot box),
 /// each run is interpolated with a Catmull-Rom spline so the line curves through the data points.
+///
+/// The points interpolation adds are budgeted across all the runs of the line, not per run:
+/// short runs between gaps escape decimation, and 100 sub-segments each would turn a
+/// 100,000-point series of three-point runs into millions of points. Past the budget the
+/// remaining runs are drawn through their data points only.
 pub(super) fn draw_runs(ctx: &mut Ctx, pts: &[Option<[f32; 2]>], color: Rgba, width: f32, smooth: Option<Bx>) {
+    let mut budget = MAX_LINE_PTS * 2;
     let mut run: Vec<[f32; 2]> = Vec::new();
     for p in pts.iter().chain(std::iter::once(&None)) {
         match p {
@@ -65,7 +151,11 @@ pub(super) fn draw_runs(ctx: &mut Ctx, pts: &[Option<[f32; 2]>], color: Rgba, wi
                 if run.len() >= 2 {
                     let r = decimate(std::mem::take(&mut run), MAX_LINE_PTS);
                     let r = match smooth {
-                        Some(plot) => smooth_run(r, plot),
+                        Some(plot) => {
+                            let r = smooth_run(r, plot, budget);
+                            budget = budget.saturating_sub(r.len());
+                            r
+                        }
                         None => r,
                     };
                     ctx.line(r, color, width);
@@ -78,15 +168,15 @@ pub(super) fn draw_runs(ctx: &mut Ctx, pts: &[Option<[f32; 2]>], color: Rgba, wi
 }
 
 /// Catmull-Rom spline through `pts`: every segment gets the same number of sub-segments (up to
-/// 100), chosen so the whole curve stays within `MAX_LINE_PTS * 2` points. Endpoints are
+/// 100), chosen so the whole curve stays within `cap` points (one per data point when `cap` is
+/// smaller than that). Endpoints are
 /// duplicated so the curve passes through the first and last points, and the curve is clamped
 /// to the `plot` box (a spline overshoots its data near sharp turns).
-fn smooth_run(pts: Vec<[f32; 2]>, plot: Bx) -> Vec<[f32; 2]> {
+fn smooth_run(pts: Vec<[f32; 2]>, plot: Bx, cap: usize) -> Vec<[f32; 2]> {
     let n = pts.len();
     if n < 3 {
         return pts;
     }
-    let cap = MAX_LINE_PTS * 2;
     let steps = (cap / n).clamp(1, 100);
     let mut out: Vec<[f32; 2]> = Vec::with_capacity(n.saturating_mul(steps).min(cap) + 1);
     let at = |i: isize| -> [f32; 2] {
@@ -139,7 +229,7 @@ mod smooth_tests {
     fn long_runs_are_smoothed_uniformly_within_the_cap() {
         let plot = Bx { x: 0.0, y: 0.0, w: 3000.0, h: 100.0 };
         let pts: Vec<[f32; 2]> = (0..1500).map(|i| [i as f32 * 2.0, if i % 2 == 0 { 20.0 } else { 80.0 }]).collect();
-        let out = smooth_run(pts, plot);
+        let out = smooth_run(pts, plot, MAX_LINE_PTS * 2);
         assert!(out.len() <= MAX_LINE_PTS * 2 + 1, "{}", out.len());
         // Two sub-segments per segment all the way to the end, not 100 each and then a straight tail.
         assert_eq!(out.len(), 1499 * 2 + 1);
@@ -151,8 +241,79 @@ mod smooth_tests {
         let plot = Bx { x: 0.0, y: 10.0, w: 300.0, h: 100.0 };
         // A step right at the plot edges: Catmull-Rom overshoots past both.
         let pts = vec![[0.0, 110.0], [100.0, 110.0], [110.0, 10.0], [200.0, 10.0], [300.0, 10.0]];
-        let out = smooth_run(pts, plot);
+        let out = smooth_run(pts, plot, MAX_LINE_PTS * 2);
         assert!(out.len() > 5);
         assert!(out.iter().all(|p| (0.0..=300.0).contains(&p[0]) && (10.0..=110.0).contains(&p[1])));
     }
+
+    /// Security: smoothing budgets its added points across every run of a line. A series of
+    /// three-point runs between gaps used to get 100 sub-segments per run, 67 times its data.
+    #[test]
+    fn gap_separated_runs_share_one_smoothing_budget() {
+        let plot = Bx { x: 0.0, y: 0.0, w: 1e6, h: 100.0 };
+        let pts: Vec<Option<[f32; 2]>> =
+            (0..100_000).map(|i| if i % 4 == 3 { None } else { Some([i as f32, if i % 2 == 0 { 20.0 } else { 80.0 }]) }).collect();
+        let m = crate::ApproxMeasure;
+        let mut ctx = Ctx { out: Vec::new(), m: &m };
+        draw_runs(&mut ctx, &pts, WHITE, 1.0, Some(plot));
+        let total: usize = ctx.out.iter().map(|p| if let Prim::Line { pts, .. } = p { pts.len() } else { 0 }).sum();
+        // 75,000 data points, plus at most the budget added by interpolation.
+        assert!(total <= 75_000 + MAX_LINE_PTS * 2, "{total}");
+        assert_eq!(ctx.out.len(), 25_000);
+        // The first runs are still smoothed.
+        assert!(matches!(ctx.out.first(), Some(Prim::Line { pts, .. }) if pts.len() > 3));
+    }
+
+    #[test]
+    fn decimate_area_preserves_paired_vertical_strips() {
+        let top: Vec<[f32; 2]> = (0..1000).map(|i| [i as f32 * 0.25, ((i * 37) % 100) as f32]).collect();
+        let base: Vec<[f32; 2]> = (0..1000).map(|i| [i as f32 * 0.25, 100.0]).collect();
+        let poly = decimate_area(top, base, 64);
+        assert_eq!(poly.len() % 2, 0);
+        let half = poly.len() / 2;
+        for i in 0..half {
+            assert_eq!(poly[i][0], poly[poly.len() - 1 - i][0]);
+            assert_eq!(poly[poly.len() - 1 - i][1], 100.0);
+        }
+    }
+
+    #[test]
+    fn decimate_area_preserves_extrema_across_3000_columns() {
+        // 3,000 occupied pixel columns with 6 points per column (18,000 points total),
+        // where each column has distinct top and baseline extrema so the initial per-column
+        // index list exceeds `MAX_LINE_PTS * 2 * 4` (6,400).
+        let max = MAX_LINE_PTS * 2;
+        let mut top = Vec::with_capacity(18_000);
+        let mut base = Vec::with_capacity(18_000);
+        for col in 0..3_000 {
+            let y_top = [50.0, 20.0, 80.0, 50.0, 50.0, 50.0];
+            let y_base = [150.0, 150.0, 150.0, 120.0, 180.0, 150.0];
+            for s in 0..6 {
+                let x = col as f32 + s as f32 * 0.1;
+                top.push([x, y_top[s]]);
+                base.push([x, y_base[s]]);
+            }
+        }
+        // Plant sharp spikes on both top and baseline in interior columns.
+        top[777 * 6 + 1][1] = 1.0;
+        top[1999 * 6 + 2][1] = 99.0;
+        base[1234 * 6 + 3][1] = 101.0;
+        base[2501 * 6 + 4][1] = 199.0;
+
+        let poly = decimate_area(top, base, max);
+        assert_eq!(poly.len() % 2, 0);
+        let half = poly.len() / 2;
+        assert!(half <= max * 4, "retained {half} paired vertices, limit is {}", max * 4);
+        for i in 0..half {
+            assert_eq!(poly[i][0], poly[poly.len() - 1 - i][0]);
+        }
+        let top_kept = &poly[..half];
+        let base_kept = &poly[half..];
+        assert_eq!(top_kept.first().map(|p| p[0]), Some(0.0));
+        assert_eq!(top_kept.last().map(|p| p[0]), Some(2999.5));
+        assert!(top_kept.iter().any(|p| p[1] == 1.0), "top min spike preserved");
+        assert!(top_kept.iter().any(|p| p[1] == 99.0), "top max spike preserved");
+        assert!(base_kept.iter().any(|p| p[1] == 101.0), "base min spike preserved");
+        assert!(base_kept.iter().any(|p| p[1] == 199.0), "base max spike preserved");
+    }
 }

crates/chart/src/resolve.rs

@@ -133,6 +133,46 @@ fn value_text(v: &Value) -> String {
     }
 }
 
+/// Characters kept of one category label: an axis label never shows more (labels are fitted to
+/// the axis), and copying more only costs memory.
+const MAX_LABEL_CHARS: usize = 255;
+/// Bytes of category label text kept per series. One long text broadcast by a short formula
+/// (`IF(SEQUENCE(100000), long_text)`) is a single shared value, but turning every element into
+/// its own label copied it 100,000 times (gigabytes). Labels past the budget are empty.
+const MAX_CATEGORY_BYTES: usize = 8 << 20;
+
+/// At most [`MAX_LABEL_CHARS`] characters and `room` bytes of `s`, cut at a character boundary.
+fn clip_label(s: &str, room: usize) -> String {
+    let mut end = 0;
+    for (n, (i, c)) in s.char_indices().enumerate() {
+        if n >= MAX_LABEL_CHARS || i + c.len_utf8() > room {
+            break;
+        }
+        end = i + c.len_utf8();
+    }
+    s.get(..end).unwrap_or_default().to_string()
+}
+
+/// The label of category `i` (value `v`) in at most `room` bytes: formatted with its source
+/// cell's number format when it is a number.
+fn category_label(wb: &Workbook, src: Option<(&gridcraft_model::Sheet, RangeRef)>, i: usize, v: &Value, room: usize) -> String {
+    if let (Some((s, r)), Value::Number(_)) = (src, v) {
+        let w = r.width().max(1) as usize;
+        let at = r.start.offset((i / w) as i64, (i % w) as i64);
+        if let Some(c) = at {
+            let code = &wb.styles.get(s.style_id(c)).num_fmt.0;
+            if !code.eq_ignore_ascii_case("general") {
+                return clip_label(&format_value(v, &NumberFormat::parse_cached(code), wb.date_system).text, room);
+            }
+        }
+    }
+    // Text is clipped before it is copied: the source may be one long shared string.
+    match v {
+        Value::Text(t) => clip_label(t, room),
+        _ => clip_label(&value_text(v), room),
+    }
+}
+
 /// Category labels, formatted with each source cell's number format (dates, currency…), and
 /// the outer levels of a multi-level axis: a category range wider than a column of values (or
 /// taller than a row of values) groups its innermost labels, year beside month. Each outer level
@@ -141,21 +181,14 @@ fn category_table(wb: &Workbook, sheet: usize, formula: &str, values: &str) -> (
     let vals = eval_list(wb, sheet, formula);
     let cells: Option<(usize, RangeRef)> = parse_ref(wb, sheet, formula);
     let src = cells.and_then(|(sh, r)| wb.sheet(sh).map(|s| (s, r)));
+    let mut room = MAX_CATEGORY_BYTES;
     let texts: Vec<String> = vals
         .iter()
         .enumerate()
         .map(|(i, v)| {
-            if let (Some((s, r)), Value::Number(_)) = (src, v) {
+            let label = category_label(wb, src, i, v, room);
-                let w = r.width().max(1) as usize;
+            room = room.saturating_sub(label.len());
-                let at = r.start.offset((i / w) as i64, (i % w) as i64);
+            label
-                if let Some(c) = at {
-                    let code = &wb.styles.get(s.style_id(c)).num_fmt.0;
-                    if !code.eq_ignore_ascii_case("general") {
-                        return format_value(v, &NumberFormat::parse_cached(code), wb.date_system).text;
-                    }
-                }
-            }
-            value_text(v)
         })
         .collect();
     let Some((_, r)) = src else { return (texts, vec![]) };
@@ -276,3 +309,23 @@ pub fn resolve(wb: &Workbook, sheet: usize, chart: &Chart) -> ChartData {
     let palette = default_palette(&wb.theme, n.min(PALETTE_CYCLE));
     ChartData { categories, category_levels, series, palette }
 }
+
+#[cfg(test)]
+mod label_budget_tests {
+    use gridcraft_model::Workbook;
+
+    /// Security: category labels are clipped before they are copied, with one byte budget per
+    /// series. A formula broadcasting one long text to 100,000 categories used to copy it
+    /// 100,000 times (3.3 GB).
+    #[test]
+    fn category_labels_share_one_byte_budget() {
+        let wb = Workbook::new();
+        let (texts, _) = super::category_table(&wb, 0, r#"=IF(SEQUENCE(100000),REPT("x",32767))"#, "");
+        assert_eq!(texts.len(), 100_000);
+        assert_eq!(texts.first().map(String::len), Some(super::MAX_LABEL_CHARS));
+        assert!(texts.iter().map(String::len).sum::<usize>() <= super::MAX_CATEGORY_BYTES);
+        // Labels are cut at character boundaries.
+        assert_eq!(super::clip_label("aé", 2), "a");
+        assert_eq!(super::clip_label("aé", 3), "aé");
+    }
+}

crates/core/src/addr.rs

@@ -188,6 +188,12 @@ impl RangeRef {
             end: CellRef::new(self.end.row.max(o.end.row), self.end.col.max(o.end.col)),
         }
     }
+    /// The top-left cell of a list of areas: the lowest row and the lowest column across all of
+    /// them, whatever order they are listed in. Excel writes the relative formulas of a
+    /// multi-area validation or conditional format for this cell. `None` for no areas.
+    pub fn top_left(ranges: &[RangeRef]) -> Option<CellRef> {
+        ranges.iter().copied().reduce(|a, b| a.union(&b)).map(|r| r.start)
+    }
     /// Row-major iterator over the cells. Callers must bound huge ranges themselves.
     pub fn iter(&self) -> impl Iterator<Item = CellRef> + '_ {
         let (r0, r1, c0, c1) = (self.start.row, self.end.row, self.start.col, self.end.col);
@@ -307,6 +313,16 @@ mod tests {
         Ok(())
     }
 
+    #[test]
+    fn top_left_spans_every_area_in_any_order() {
+        let areas: Vec<RangeRef> = ["H62:H68", "H26:H27", "H93:H95"].iter().filter_map(|a| RangeRef::parse(a)).collect();
+        assert_eq!(RangeRef::top_left(&areas), CellRef::parse("H26"));
+        // Lowest row and lowest column, even when they come from different areas.
+        let areas: Vec<RangeRef> = ["C5:D6", "E2", "B9"].iter().filter_map(|a| RangeRef::parse(a)).collect();
+        assert_eq!(RangeRef::top_left(&areas), CellRef::parse("B2"));
+        assert_eq!(RangeRef::top_left(&[]), None);
+    }
+
     #[test]
     fn sheet_quoting_follows_excel() {
         for quoted in [

crates/engine/src/cf.rs

@@ -244,7 +244,7 @@ impl CfCache {
         let v = sh.value(c);
         let no_stats = RuleStats::default();
         for (idx, cf) in rules {
-            let first = cf.ranges.first().map(|r| r.start).unwrap_or(c);
+            let first = RangeRef::top_left(&cf.ranges).unwrap_or(c);
             let st: &RuleStats = match stats_need(&cf.rule) {
                 Some(need) => &*self.stats.entry(idx).or_insert_with(|| RuleStats::build(sh, &cf.ranges, need)),
                 None => &no_stats,

crates/engine/src/cmd.rs

@@ -459,8 +459,11 @@ pub(crate) const TOUCH_LOG_LIMIT: usize = 1_000_000;
 pub(crate) const PROTECTED: &str = "The cell or chart you're trying to change is on a protected sheet.";
 
 /// Refuses an edit that changed what a locked cell on a protected sheet holds (its value or
-/// formula), whichever command made it. Sheets are matched by name, so moving, renaming or
+/// formula), or that unlocked it, whichever command made it. Sheets are matched by name, so
-/// deleting a sheet isn't an edit of its cells.
+/// moving, renaming or deleting a sheet isn't an edit of its cells. A sort or duplicate removal
+/// that moves an unlocked cell with equal content onto a locked one changes no content but would
+/// leave the cell editable, so the effective lock (row and column formats included) is compared
+/// as well.
 fn check_protection(old: &Workbook, new: &Workbook, unlocked: &[(String, String)]) -> Result<()> {
     for sh in &old.sheets {
         if !sh.is_protected() {
@@ -471,7 +474,8 @@ fn check_protection(old: &Workbook, new: &Workbook, unlocked: &[(String, String)
             continue;
         }
         for c in sh.cells.diff(&after.cells) {
-            if !same_content(sh.cell(c), after.cell(c))
+            let unlocked_now = !new.styles.get(after.style_id(c)).protection.locked;
+            if (unlocked_now || !same_content(sh.cell(c), after.cell(c)))
                 && old.styles.get(sh.style_id(c)).protection.locked
                 && let Some(m) = locked_cell_error(sh, c, unlocked)
             {

crates/engine/src/cmd/data/tests.rs

@@ -480,6 +480,45 @@ fn a_list_typed_without_quotes_is_saved_as_a_quoted_list() {
     assert_eq!(sheet_xml(&reopened), xml, "a second save writes the same rules");
 }
 
+#[test]
+fn a_relative_list_source_is_read_from_the_cell_being_checked() {
+    // As in Excel, `=$B1:$B2` on A3:A4,A1:A2 is written for A1 (the top-left cell of all the
+    // areas) and lists B4:B5 at A4. It used to list B1:B2 in every cell.
+    let mut s = Session::new();
+    s.new_workbook();
+    s.execute("range.setValues", json!({"range": "B1:B5", "values": [["a"], ["b"], ["c"], ["d"], ["e"]]})).unwrap();
+    s.execute("data.validation", json!({"range": "A3:A4,A1:A2", "type": "list", "formula1": "=$B1:$B2"})).unwrap();
+    let wb = s.doc().unwrap().wb.clone();
+    let dv = wb.active().unwrap().validations[0].clone();
+    for (cell, items) in [("A1", ["a", "b"]), ("A2", ["b", "c"]), ("A3", ["c", "d"]), ("A4", ["d", "e"])] {
+        let at = CellRef::parse(cell).unwrap();
+        assert_eq!(list_items(&wb, 0, at, &dv), items, "{cell}");
+        for v in ["a", "b", "c", "d", "e"] {
+            assert_eq!(check_validation(&wb, 0, at, v).is_none(), items.contains(&v), "{cell} with {v}");
+        }
+    }
+}
+
+#[test]
+fn a_list_source_that_takes_in_the_cell_does_not_list_the_value_being_typed() {
+    // `=$A1:$A2` on A2:A3 is A1:A2 at A2 and A2:A3 at A3. The list is the one before the entry, as
+    // in Excel; a new value used to land in its own source and pass.
+    let mut s = Session::new();
+    s.new_workbook();
+    s.execute("range.setValues", json!({"range": "A1:A2", "values": [["x"], ["y"]]})).unwrap();
+    s.execute("data.validation", json!({"range": "A2:A3", "type": "list", "formula1": "=$A1:$A2"})).unwrap();
+    let wb = &s.doc().unwrap().wb;
+    for (cell, accepted, refused) in [("A2", &["x", "y"][..], &["new"][..]), ("A3", &["y"], &["x", "new"])] {
+        let at = CellRef::parse(cell).unwrap();
+        for v in accepted {
+            assert!(check_validation(wb, 0, at, v).is_none(), "{cell} refuses {v}");
+        }
+        for v in refused {
+            assert!(check_validation(wb, 0, at, v).is_some(), "{cell} accepts {v}");
+        }
+    }
+}
+
 #[test]
 fn a_rule_with_an_unknown_type_operator_or_error_style_is_refused() {
     // A typo used to give a rule that validates nothing (`type="none"`) or the wrong check,

crates/engine/src/cmd/data/validation.rs

@@ -38,11 +38,18 @@ fn subtract_range(r: RangeRef, cut: &RangeRef) -> Vec<RangeRef> {
 }
 
 /// Removes the cells of `cuts` from every validation, keeping the rest of each rule's ranges.
+/// When the rule's top-left cell goes, its relative formulas are rewritten for the new top-left
+/// cell, so the cells left keep checking the same cells.
 pub(in super::super) fn remove_validation_cells(validations: &mut Vec<Validation>, cuts: &[RangeRef]) {
     for dv in validations.iter_mut() {
+        let before = RangeRef::top_left(&dv.ranges);
         for cut in cuts {
             dv.ranges = dv.ranges.iter().flat_map(|r| subtract_range(*r, cut)).collect();
         }
+        if let (Some(from), Some(to)) = (before, RangeRef::top_left(&dv.ranges)) {
+            dv.f1 = move_rule_formula(&dv.f1, from, to);
+            dv.f2 = dv.f2.take().map(|f| move_rule_formula(&f, from, to));
+        }
     }
     validations.retain(|d| !d.ranges.is_empty());
 }
@@ -145,8 +152,10 @@ fn list_source(f: &str) -> String {
     format!("\"{}\"", t.replace('"', "\"\""))
 }
 
-/// List entries of a list validation (literal or from a range).
+/// List entries of a list validation (literal or from a range) for the cell `at`. A relative
-pub fn list_items(wb: &Workbook, sheet: usize, dv: &Validation) -> Vec<String> {
+/// source is written for the rule's top-left cell and read from `at`, as in Excel (`=$B1:$B3` on
+/// A1:A9 lists B5:B7 at A5).
+pub fn list_items(wb: &Workbook, sheet: usize, at: CellRef, dv: &Validation) -> Vec<String> {
     let f = dv.f1.trim();
     if is_literal_list(f) {
         // A quoted list is a string literal: `""` inside stands for one `"`.
@@ -156,8 +165,8 @@ pub fn list_items(wb: &Workbook, sheet: usize, dv: &Validation) -> Vec<String> {
         };
         return items.split(',').map(|x| x.trim().to_string()).filter(|x| !x.is_empty()).collect();
     }
-    let at = dv.ranges.first().map(|r| r.start).unwrap_or_default();
+    let first = RangeRef::top_left(&dv.ranges).unwrap_or(at);
-    match gridcraft_calc::evaluate(wb, sheet, at, f) {
+    match gridcraft_calc::evaluate(wb, sheet, at, &formula_at(f, first, at)) {
         Value::Array(a) => a.data.iter().filter(|v| !v.is_empty()).map(Value::display).collect(),
         v if !v.is_empty() && !v.is_error() => vec![v.display()],
         _ => vec![],
@@ -175,9 +184,10 @@ pub fn check_validation(wb: &Workbook, sheet: usize, at: CellRef, input: &str) -
         return None;
     }
     let v = gridcraft_core::parse::parse_input(input, wb.date_system).value;
-    // The formulas are written for the first cell of the range and see the value being entered,
+    // The formulas are written for the top-left cell of all the areas and see the value being entered,
     // as in Excel (a custom `=A1>10` on A1:A9 checks A5's new value at A5).
-    let first = dv.ranges.first().map(|r| r.start).unwrap_or(at);
+    let first = RangeRef::top_left(&dv.ranges).unwrap_or(at);
+    let original = wb;
     let entered;
     let wb = if sh.value(at) == v {
         wb
@@ -193,7 +203,9 @@ pub fn check_validation(wb: &Workbook, sheet: usize, at: CellRef, input: &str) -
     let eval = |f: &str| gridcraft_calc::evaluate(wb, sheet, at, &formula_at(f, first, at));
     let num = |f: &str| eval(f).to_number().ok();
     let ok = match dv.kind {
-        ValidationKind::List => list_items(wb, sheet, dv).iter().any(|x| x.eq_ignore_ascii_case(input)),
+        // The list is the one the dropdown showed before the entry, as in Excel: a source that takes
+        // in the cell itself (`=$A1:$A2` on A2:A3 is A2:A3 at A3) doesn't list the value being typed.
+        ValidationKind::List => list_items(original, sheet, at, dv).iter().any(|x| x.eq_ignore_ascii_case(input)),
         ValidationKind::Custom => eval(&dv.f1).to_bool().unwrap_or(false),
         ValidationKind::TextLength => {
             let n = input.chars().count() as f64;

crates/engine/src/cmd/edit/paste_special.rs

@@ -284,7 +284,7 @@ pub(super) fn paste_special(s: &mut Session, p: &Json) -> Result<Json> {
                 crate::cmd::data::remove_validation_cells(&mut sh.validations, &[RangeRef::new(dest, dest)]);
                 if let Some(mut dv) = rule {
                     // Relative references move with the rule, as pasted formulas do.
-                    let first = dv.ranges.first().map_or(sc, |r| r.start);
+                    let first = RangeRef::top_left(&dv.ranges).unwrap_or(sc);
                     dv.f1 = crate::cmd::data::move_rule_formula(&dv.f1, first, dest);
                     dv.f2 = dv.f2.map(|f| crate::cmd::data::move_rule_formula(&f, first, dest));
                     dv.ranges = vec![RangeRef::new(dest, dest)];

crates/engine/src/cmd/insert.rs

@@ -1733,7 +1733,13 @@ fn clear_cf(s: &mut Session, p: &Json) -> Result<Json> {
             sh.cond_formats.clear();
         } else {
             for cf in sh.cond_formats.iter_mut() {
+                let before = RangeRef::top_left(&cf.ranges);
                 cf.ranges.retain(|r| !ranges.iter().any(|x| x.intersects(r)));
+                // The relative formulas are written for the top-left cell: when it goes, they're
+                // rewritten for the new one, so the areas left keep reading the same cells.
+                if let (Some(from), Some(to)) = (before, RangeRef::top_left(&cf.ranges)) {
+                    rebase_cf_formulas(&mut cf.rule, from, to);
+                }
             }
             sh.cond_formats.retain(|c| !c.ranges.is_empty());
         }
@@ -1741,6 +1747,19 @@ fn clear_cf(s: &mut Session, p: &Json) -> Result<Json> {
     })
 }
 
+/// Moves the relative references of a rule's per-cell formulas written for `from` to `to`.
+fn rebase_cf_formulas(rule: &mut CfRule, from: CellRef, to: CellRef) {
+    let mv = |f: &str| crate::cmd::data::move_rule_formula(f, from, to);
+    match rule {
+        CfRule::CellIs { a, b, .. } => {
+            *a = mv(a);
+            *b = b.as_deref().map(mv);
+        }
+        CfRule::Expression { formula, .. } => *formula = mv(formula),
+        _ => {}
+    }
+}
+
 fn manage_cf(s: &mut Session, p: &Json) -> Result<Json> {
     let sheet = target_sheet(s, p)?;
     if p.get("delete").is_none() && p.get("moveUp").is_none() && p.get("moveDown").is_none() {

crates/engine/src/cmd/sheet.rs

@@ -398,10 +398,10 @@ fn move_columns(s: &mut Session, p: &Json) -> Result<Json> {
     {
         return Err(EngineError::Other("To prevent possible loss of data, columns cannot be shifted off of the worksheet.".into()));
     }
-    // The checks must authorize the sheet this command modifies (`target_sheet`), not whatever
+    // The checks must authorize the sheet this command modifies, not whatever sheet is active:
-    // sheet is active: both carry the command's own `sheet` parameter on.
+    // both get the index `target_sheet` resolved (from `sheet`, or a `Sheet!` range or cell).
-    check_lines_protection(s, &json!({"cols": RangeRef::cols(before, before).a1(), "sheet": p.get("sheet")}), Axis::Cols, before, count, true)?;
+    check_lines_protection(s, &json!({"cols": RangeRef::cols(before, before).a1(), "sheet": sheet}), Axis::Cols, before, count, true)?;
-    check_lines_protection(s, &json!({"cols": RangeRef::cols(from, end - 1).a1(), "sheet": p.get("sheet")}), Axis::Cols, from, count, false)?;
+    check_lines_protection(s, &json!({"cols": RangeRef::cols(from, end - 1).a1(), "sheet": sheet}), Axis::Cols, from, count, false)?;
 
     let moved_from = if before <= from { from + count } else { from };
     if moved_from.checked_add(count).is_none_or(|end| end > MAX_COLS) {

crates/engine/src/tests.rs

@@ -2743,6 +2743,78 @@ fn validation_formulas_are_relative_and_see_the_new_value() {
     assert!(!ok(&mut s, "C1", "50"));
 }
 
+#[test]
+fn multi_area_rule_formulas_are_relative_to_the_top_left_cell_of_all_areas() {
+    // Issue #3152: Excel writes the formula for the top-left cell of all the areas (H26), whatever
+    // order they are listed in, not for the first area listed (H62).
+    let mut s = s();
+    s.execute("range.setValues", json!({"range": "F26:F27", "values": [[4], [5]]})).unwrap();
+    s.execute("data.validation", json!({"range": "H62:H68,H26:H27,H93:H95", "type": "custom", "formula1": "=MOD($H26,$F26)=0"})).unwrap();
+    let ok = |s: &mut Session, cell: &str, input: &str| s.execute("data.validate", json!({"cell": cell, "input": input})).unwrap()["ok"] == true;
+    assert!(ok(&mut s, "H26", "4"));
+    assert!(ok(&mut s, "H26", "8"));
+    assert!(!ok(&mut s, "H26", "3"));
+    assert!(ok(&mut s, "H27", "10"));
+    assert!(!ok(&mut s, "H27", "4"));
+
+    // Conditional formats anchor on the same cell: `=D2>0` on D5:D6,D2:D3 checks D2 at D2.
+    s.execute("range.setValues", json!({"range": "D2:D6", "values": [[1], [0], [0], [1], [0]]})).unwrap();
+    s.execute("home.conditionalFormat", json!({"range": "D5:D6,D2:D3", "rule": {"type": "expression", "formula": "=D2>0", "preset": "greenFill"}}))
+        .unwrap();
+    let wb = s.doc().unwrap().wb.clone();
+    let mut cache = crate::cf::CfCache::new();
+    let mut styled = |c: &str| cache.look(&wb, 0, CellRef::parse(c).unwrap()).and_then(|l| l.style).is_some();
+    assert_eq!([styled("D2"), styled("D3"), styled("D5"), styled("D6")], [true, false, true, false]);
+}
+
+#[test]
+fn removing_a_rules_top_left_cell_rewrites_its_formulas_for_the_new_one() {
+    let mut s = s();
+    let ok = |s: &mut Session, cell: &str, input: &str| s.execute("data.validate", json!({"cell": cell, "input": input})).unwrap()["ok"] == true;
+    let f1 = |s: &Session| s.doc().unwrap().wb.active().unwrap().validations[0].f1.clone();
+
+    // One area: clearing A1 off A1:A9 leaves A2:A9, whose cells still check themselves.
+    s.execute("data.validation", json!({"range": "A1:A9", "type": "custom", "formula1": "=A1>10"})).unwrap();
+    s.execute("data.validation", json!({"range": "A1", "clear": true})).unwrap();
+    assert_eq!(f1(&s), "A2>10");
+    assert!(ok(&mut s, "A2", "20"));
+    assert!(!ok(&mut s, "A2", "5"));
+    s.execute("data.validation", json!({"range": "A1:A9", "clear": true})).unwrap();
+
+    // Several areas: clearing H26 moves the top-left cell to H27, where `$H27,$F27` is checked.
+    s.execute("range.setValues", json!({"range": "F26:F27", "values": [[4], [5]]})).unwrap();
+    s.execute("data.validation", json!({"range": "H62:H68,H26:H27", "type": "custom", "formula1": "=MOD($H26,$F26)=0"})).unwrap();
+    s.execute("data.validation", json!({"range": "H26", "clear": true})).unwrap();
+    assert_eq!(f1(&s), "MOD($H27,$F27)=0");
+    assert!(ok(&mut s, "H27", "10"));
+    assert!(!ok(&mut s, "H27", "4"));
+    // Absolute and literal formulas don't move.
+    s.execute("data.validation", json!({"range": "J1:J3", "type": "list", "formula1": "=$B$1:$B$2"})).unwrap();
+    s.execute("data.validation", json!({"range": "J1", "clear": true})).unwrap();
+    let dv = s.doc().unwrap().wb.active().unwrap().validations.iter().find(|d| d.ranges[0].a1() == "J2:J3").unwrap().f1.clone();
+    assert_eq!(dv, "$B$1:$B$2");
+
+    // Conditional formats: Clear Rules on D2 drops the D2:D3 area, and D5:D6 keeps reading itself.
+    s.execute("range.setValues", json!({"range": "D2:D6", "values": [[1], [0], [0], [0], [1]]})).unwrap();
+    s.execute("home.conditionalFormat", json!({"range": "D5:D6,D2:D3", "rule": {"type": "expression", "formula": "=D2>0", "preset": "greenFill"}}))
+        .unwrap();
+    s.execute("range.setValues", json!({"range": "E2:E6", "values": [[1], [0], [0], [0], [1]]})).unwrap();
+    s.execute("range.setValues", json!({"range": "G2:G6", "values": [[0], [9], [9], [9], [0]]})).unwrap();
+    s.execute(
+        "home.conditionalFormat",
+        json!({"range": "E5:E6,E2:E3", "rule": {"type": "cellIs", "operator": "greater", "value": "=G2", "preset": "lightRedFill"}}),
+    )
+    .unwrap();
+    s.execute("home.clearRules", json!({"range": "D2,E2"})).unwrap();
+    let rules: Vec<gridcraft_model::CfRule> = s.doc().unwrap().wb.active().unwrap().cond_formats.iter().map(|c| c.rule.clone()).collect();
+    assert!(rules.iter().any(|r| matches!(r, gridcraft_model::CfRule::Expression { formula, .. } if formula == "D5>0")), "{rules:?}");
+    assert!(rules.iter().any(|r| matches!(r, gridcraft_model::CfRule::CellIs { a, .. } if a == "G5")), "{rules:?}");
+    let wb = s.doc().unwrap().wb.clone();
+    let mut cache = crate::cf::CfCache::new();
+    let mut styled = |c: &str| cache.look(&wb, 0, CellRef::parse(c).unwrap()).and_then(|l| l.style).is_some();
+    assert_eq!([styled("D5"), styled("D6"), styled("E5"), styled("E6")], [false, true, false, true]);
+}
+
 #[test]
 fn samples_build() {
     for (name, _) in crate::sample::SAMPLES {
@@ -5225,6 +5297,42 @@ fn move_columns_checks_the_protection_of_the_named_sheet() {
     assert_eq!(v(&s, "A1"), Value::text("A"));
 }
 
+#[test]
+fn move_columns_checks_the_protection_of_a_sheet_named_by_its_range() {
+    // A `Sheet!` range or cell picks the sheet the move modifies; the protection checks must
+    // authorize that sheet too, not the active one.
+    let mut s = s();
+    s.execute("home.insertSheet", json!({"name": "P"})).unwrap();
+    s.execute("range.setValues", json!({"range": "A1", "values": [[1, 2, 3, 4]]})).unwrap();
+    s.execute("review.protectSheet", json!({})).unwrap();
+    s.execute("sheet.activate", json!({"sheet": 0})).unwrap();
+    for key in ["range", "cell"] {
+        let err = s.execute("sheet.moveColumns", json!({key: "P!A1", "cols": "B:C", "before": 4})).expect_err("moving columns on a protected sheet");
+        assert!(err.to_string().contains("protected"), "{err}");
+    }
+    let d = s.doc().unwrap();
+    let sh = &d.wb.sheets[d.wb.sheet_index("P").unwrap()];
+    let pv: Vec<Value> = (0..4).map(|c| sh.value(CellRef::new(0, c))).collect();
+    assert_eq!(pv, vec![Value::number(1.0), Value::number(2.0), Value::number(3.0), Value::number(4.0)]);
+}
+
+#[test]
+fn sorting_cannot_unlock_a_locked_cell_by_moving_equal_content_onto_it() {
+    // An unlocked 2 sorted onto a locked 2 leaves the content as it was, but would make the cell
+    // editable; the sort is refused instead.
+    let mut s = s();
+    s.execute("range.setValues", json!({"range": "A1", "values": [[2], [2], [1]]})).unwrap();
+    s.execute("home.lockCell", json!({"range": "A1", "on": false})).unwrap();
+    s.execute("home.lockCell", json!({"range": "A3", "on": false})).unwrap();
+    s.execute("review.protectSheet", json!({"sort": true})).unwrap();
+    let before = s.doc().unwrap().wb.clone();
+    let err =
+        s.execute("data.sort", json!({"range": "A1:A3", "header": false, "keys": [{"column": "A", "order": "asc"}]})).expect_err("sort unlocking A2");
+    assert!(err.to_string().contains("protected sheet"), "{err}");
+    assert_eq!(*s.doc().unwrap().wb, *before);
+    assert!(s.execute("cell.set", json!({"cell": "A2", "input": "9"})).is_err(), "A2 stays locked");
+}
+
 #[test]
 fn a_script_cannot_switch_windows() {
     // Stored scripts are scoped to their workbook: a step that activates another window would

crates/ui-egui/src/grid/editor.rs

@@ -125,7 +125,7 @@ pub(super) fn list_picker(app: &mut SheetApp, ui: &mut egui::Ui, geo: &Geo, was_
         app.grid.list_picker = None;
         return;
     };
-    let items = gridcraft_engine::cmd::data::list_items(&wb, si, &dv);
+    let items = gridcraft_engine::cmd::data::list_items(&wb, si, c, &dv);
     let r = geo.cell_rect(sh, c);
     // Fit the popup to its rows (up to LIST_PICKER_MAX_ROWS); without a minimum the scroll area collapses to its 64 px default.
     let height = list_picker_height(items.len(), LIST_PICKER_ROW_H, ui.spacing().item_spacing.y);

crates/ui-egui/src/ribbon/home.rs

@@ -622,10 +622,13 @@ fn size_combo(app: &mut SheetApp, ui: &mut Ui, st: &Style) {
     let arrow_rect = Rect::from_min_max(egui::pos2(frame.right() - 16.0, frame.top() + 1.0), egui::pos2(frame.right() - 1.0, frame.bottom() - 1.0));
     let mut field_ui =
         ui.new_child(egui::UiBuilder::new().max_rect(text_rect.shrink2(vec2(6.0, 0.0))).layout(egui::Layout::left_to_right(egui::Align::Center)));
+    // The text edit is `interact_size.y` tall and puts its text at the top of that unless told
+    // otherwise: center it, on the Font name's baseline (#3155).
     let out = egui::TextEdit::singleline(&mut text)
         .id(field)
         .font(theme::ui_font(12.5))
         .frame(egui::Frame::NONE)
+        .align(egui::Align2::LEFT_CENTER)
         .desired_width(text_rect.width() - 12.0)
         .show(&mut field_ui);
     let resp = out.response;

crates/ui-egui/tests/it/font_size_box.rs

@@ -1,6 +1,7 @@
-//! Home ▸ Font Size is a box you type a size into, with the standard sizes behind its arrow (#932).
+//! Home ▸ Font Size is a box you type a size into, with the standard sizes behind its arrow (#932),
+//! and the size sits in the middle of that box (#3155).
 
-use egui::{Event, Key, Modifiers, accesskit::Role};
+use egui::{Event, Key, Modifiers, Rect, Shape, accesskit::Role};
 use egui_kittest::kittest::Queryable as _;
 use gridcraft_engine::Session;
 use gridcraft_engine::core::{CellRef, Value};
@@ -124,3 +125,31 @@ fn the_arrow_opens_the_plain_list_of_sizes() {
     h.run_steps(3);
     assert_eq!(size(&h, "A1"), 12.0, "Down from 11 then Enter picks 12");
 }
+
+/// The on-screen box of the painted text `text` that overlaps `within`. The grid's row headers
+/// paint "11" too, so the size has to be looked for inside its own box.
+fn painted_text(h: &Harness, text: &str, within: Rect) -> Rect {
+    h.output()
+        .shapes
+        .iter()
+        .find_map(|s| match &s.shape {
+            Shape::Text(t) if t.galley.job.text == text => {
+                let rect = t.galley.rect.translate(t.pos.to_vec2());
+                within.intersects(rect).then_some(rect)
+            }
+            _ => None,
+        })
+        .unwrap_or_else(|| panic!("{text:?} is painted inside {within:?}"))
+}
+
+#[test]
+/// A text edit aligns its text to the top of its rect unless told otherwise, which left the size
+/// 4 pt above the Font name's baseline.
+fn the_size_is_vertically_centered_in_its_box() {
+    let h = harness();
+    let field = h.get_by_role_and_label(Role::TextInput, "Font Size").rect();
+    let value = painted_text(&h, "11", field);
+    let name = painted_text(&h, "Calibri", Rect::EVERYTHING);
+    assert!((value.center().y - field.center().y).abs() <= 1.0, "the size is centered in its box: {value:?} in {field:?}");
+    assert!((value.center().y - name.center().y).abs() <= 1.0, "the size is on the Font name's baseline: {value:?} against {name:?}");
+}

crates/ui-egui/tests/it/ribbon_layout.rs

@@ -104,7 +104,10 @@ struct Clicks {
 #[test]
 /// The main button clicks once and the arrow twice separately; the tooltip keeps the platform shortcut, and the icon sits above the full-width label.
 fn big_split_button_separates_the_default_action_from_the_menu() {
-    let mut h = crate::common::builder().with_size(vec2(300.0, 200.0)).build_ui_state(
+    // The ribbon picks the shortcut by the OS egui reports, which kittest pins to Nix unless told:
+    // pin macOS, so the check is the same on every host (the other platforms' text is in
+    // `widgets::tests`).
+    let mut h = crate::common::builder().with_size(vec2(300.0, 200.0)).with_os(egui::os::OperatingSystem::Mac).build_ui_state(
         |ui, c: &mut Clicks| {
             let (main, arrow) = widgets::big_split_button(ui, Icon::Sum, "Auto\nSum", "AutoSum");
             c.main += u32::from(main.clicked());
@@ -125,8 +128,7 @@ fn big_split_button_separates_the_default_action_from_the_menu() {
     h.ctx.all_styles_mut(|s| s.interaction.tooltip_delay = 0.0);
     h.get_by_label("Auto Sum").hover();
     h.run_steps(6);
-    let shortcut = if cfg!(target_os = "macos") { "AutoSum (\u{2318}\u{21e7}T)" } else { "AutoSum (Alt+=)" };
+    assert!(h.query_by_value("AutoSum (\u{2318}\u{21e7}T)").is_some(), "tooltip with the macOS shortcut");
-    assert!(h.query_by_value(shortcut).is_some(), "tooltip with the shortcut");
     // The icon part sits above the label part, across the full width.
     let main = h.get_by_label("Auto Sum").rect();
     let arrow = h.get_by_label("Auto Sum options").rect();

crates/xlsx/src/sheet_write/rules.rs

@@ -52,8 +52,10 @@ pub(super) fn x14_cfvo(v: &CfValueKind) -> String {
     format!("<x14:cfvo type=\"{ty}\"><xm:f>{}</xm:f></x14:cfvo>", esc(&val))
 }
 
+/// One `cfRule` element. The formulas generated for text, blank, error and date rules refer to the
+/// top-left cell of all the rule's areas, the cell Excel reads relative references from.
 pub(super) fn cf_rule_xml(cf: &CondFormat, priority: u32, out: &mut Out) -> String {
-    let tl = cf.ranges.first().map(|r| r.start.a1()).unwrap_or_else(|| "A1".into());
+    let tl = RangeRef::top_left(&cf.ranges).map(|c| c.a1()).unwrap_or_else(|| "A1".into());
     let stop = if cf.stop_if_true { " stopIfTrue=\"1\"" } else { "" };
     let mut dxf = |st: &Style| dxf_id(&mut out.dxfs, st);
     let f = |x: &str| format!("<formula>{}</formula>", esc(&text_to_file(x)));

crates/xlsx/src/tests/roundtrip.rs

@@ -1678,3 +1678,21 @@ fn workbook_view_writer_clamps_out_of_range_model_values() {
         assert_eq!(back.view.tab_ratio, 1000);
     }
 }
+
+#[test]
+fn generated_rule_formulas_use_the_top_left_cell_of_every_area() {
+    // Issue #3152: the areas aren't in top-to-bottom order; the formula is written for C2, not C5.
+    let mut wb = Workbook::new();
+    let red = Box::new(Style::default());
+    wb.sheet_mut(0).unwrap().cond_formats.push(CondFormat {
+        ranges: vec![rr("C5:C6"), rr("C2:C3")],
+        rule: CfRule::ContainsText { text: "x".into(), style: red },
+        priority: 1,
+        stop_if_true: false,
+    });
+    let bytes = write_xlsx(&wb).unwrap();
+    let mut z = zip::ZipArchive::new(std::io::Cursor::new(bytes)).unwrap();
+    let mut xml = String::new();
+    z.by_name("xl/worksheets/sheet1.xml").unwrap().read_to_string(&mut xml).unwrap();
+    assert!(xml.contains("<formula>NOT(ISERROR(SEARCH(\"x\",C2)))</formula>"), "{xml}");
+}