A visible workbook-scope name such as `_gc_macro_0_0` matched the storage key and was read as a
macro and removed when the workbook opened. Macro storage is written hidden, so only hidden names
are read back; a person's own name of that shape stays a name.
Opening a workbook gave each clashing macro name a suffix by trying " (2)", " (3)"... in turn,
and each try scanned every macro accepted so far. A file with 1,000 macros of the same
255-character name made about 300 million name comparisons.
Load now keeps a set of the names in use (ASCII case-insensitive, as find compares them) and,
for each shortened name and suffix width, the next suffix to try, so each suffix is looked up
about once. The result is unchanged: the smallest free suffix, within the name length limit,
and the renamed macro still passes the final checks. unique_name keeps its signature. A test
opens, saves and reopens 1,000 same-name macros in JSON and xlsx and keeps them all, and
another counts lookups instead of timing them.
Opening a workbook accepted a macro whose format version `v` was above MACRO_VERSION. Serde
dropped the fields this build doesn't know, and the next save wrote the reduced macro back
with `v: 2`, so a newer build would read it as a complete version 2 macro.
A version above MACRO_VERSION is now refused by Macro::check_limits, and parse_macro checks
the raw `v` before reading the steps. Such a macro takes the existing per-macro path: it is
left out with the usual single warning (which now names a newer format), and the rest of the
workbook opens. Tests cover JSON and xlsx hidden names, with current and missing versions as
controls.
Workbook::macros was read straight into typed macros, so one entry this
build couldn't read (a step type from a later build, an unknown
onConflict value, an entry that isn't an object) failed the whole file
with "not a GridCraft JSON workbook". The field is now read as raw
entries into Workbook::macros_read, and macros::load reads each one
with parse_macro, as for xlsx: short-form steps are accepted, the depth
limit is checked before deserializing, and a bad entry is dropped with
the same warning. Only the first 1,000 entries are read, as in xlsx.
load listed every _gc_macro_ item, then read each one with a scan of
all the workbook's names, and removed each with another full scan.
Damaged items didn't count toward the macro limit, so a file with
20,000 damaged items took 20,000 scans of 20,000 names (seconds, and
far more for a larger file). The names are now taken out of the
workbook and grouped by item in one pass; only the first 1,000 items
are read, and the rest are counted in the warning without being read.
When a file held two macros with the same name, the second was renamed
"name (2)" without room for the suffix. Two macros with the same
255-character name both opened, but the second name grew to 259
characters, was saved that way, and the next open dropped that macro as
over the limits. unique_name now shortens the name to make room for the
suffix, and load checks the macro again after renaming it.
Only parse_macro refused a name holding a line break or other control
character. Macros that came from the macros field of a JSON workbook
were checked with check_limits alone, so a file could bring in a macro
named "a\nb" that macro.save and macro.rename would refuse. The check
now lives in Macro::check_limits, so every path applies it, and such a
macro is dropped with the usual warning when the file is opened.
A macro is plain data in the model (model/src/macros.rs): a name, a
description, an optional shortcut, declared inputs (shape, header,
column types, non-empty, default reference), steps, an output rule
(anchor and what to do on a conflict) and the commands it may run that
read or write files. A step runs a command (id and params) or is one of
three bounded control steps: Repeat over the rows or columns of a range,
If on one cell's value, and Stop with a message. Every step carries
enabled, breakpoint and note flags. These are GridCraft macros, not VBA;
a VBA project in a file stays preserved and is never run.
Workbook::macros holds them. The JSON format keeps the field. In xlsx,
io::save_bytes writes each macro as one chunked hidden-name item,
_gc_macro_<n>, and io::open_bytes takes the items back out of the names,
so the names never linger in the open document.
Limits are checked whenever a macro is read from a file or a command:
at most 1,000 macros, 10,000 steps each, Repeat and If nested 4 deep,
names and notes of bounded length, and at most 4,194,304 characters of
JSON, so that saving a workbook never fails because of a macro; nesting
is checked before the steps are deserialized. What is over or damaged
is dropped with one warning, and clashing names get a suffix.
Automate scripts keep their own storage (_sc_scripts) and are neither
read nor changed by this.
The item store read, listed and removed every workbook-scope name of the `_gc_<key>_<n>` shape,
visible or not, so saving an item removed a person's own visible name that happened to look like
one. Items are the hidden names the store writes; a legacy `_sc_<key>` name still reads. A visible
`_gc_` name is left alone by every operation, and writing an item that would need that name is
refused before anything changes: a hidden name beside it with the same name is the one an xlsx
file drops, so the item would be lost on save.
A command that changed the workbook cleared the redo history even when an open group owned
its step. When the group was then rolled back inside the same command (the debugger's Stop
with Undo Changes), the rollback put the redo history back and the command's bookkeeping cleared
it again. Now only a command that makes a step of its own clears the redo history; a group
clears it when it ends as a step, and a rollback restores it.
The record of the last group step (document, history length, epoch) outlived the Undo of that
step. A later command that opened and closed its own groups at the same history length, after
rolling one back, passed the epoch check (the record's epoch merely differed from the one the
command started with) and took the name of the nested edit it had made instead of its own.
The step must now come from a group ended during the command (an epoch past the command's
starting one), and a rollback drops a record of a step it truncated away.
crates/engine/src/cmd/insert.rs: kept both sides: PR #884's is_string_literal and cf_style_json, and PR #2022's check_cf_* before edit(); 884's kept string literals parse
crates/ui-egui/src/grid.rs: kept both GridState fields (context_menu_frame, fill_menu); previous_popups tuple has four elements inside the touch_pan branch; release match has Drag::Rows|Cols, then the two Drag::Fill arms
docs/ui-parity.md: kept HEAD header line, both change rows
crates/xlsx/src/styles.rs: family/charset block ported into the dxf.is_none() branch of font_xml (PR #1225 made it take Option<&DxfStated>)
docs/file-format-parity.md: header Change line keeps both sides' clauses
Conflicts:
- docs/file-format-parity.md: header and the three .xlsx rows keep main's text plus the show-objects entry; both log rows kept
- docs/ui-parity.md: header keeps main's text plus Ctrl+6; both log rows kept
Entering them through the parser applied percent entry to Percentage-formatted
cells (a stored 0.05 would not round-trip). Test: scenario_show_restores_a_percentage_cells_stored_number.
crates/ui-egui/src/grid.rs: kept object_menu (2084) and error_check_tag (2095), both fns and both calls.
crates/ui-egui/src/i18n/de.rs, pt.rs: union of the entries.
docs/ui-parity.md: one status line naming both changes, both history rows.
crates/ui-egui/src/control.rs: kept #1477's unconditional build_params call
crates/ui-egui/src/dialogs.rs: build_params pub(crate) once, with #1628's advancedFilter arm
docs/ui-parity.md: status line combined, change-log rows both kept
prxnvt