* Data: Solver Load/Save Model and Reset All
data.solverSaveModel writes a model (the sheet's saved model, or one
given as data.solver params) down a column of its sheet as formulas:
the objective and goal (=MAX(...), =MIN(...) or =cell=value), the
variable cells (=COUNT(...)), one =AND(relation) per constraint, which
shows TRUE while the constraint holds, and the method and its options
as an array constant. It refuses a range that overlaps the model's
cells or runs off the sheet.
data.solverLoadModel reads such a range (or reads down from its first
cell), checks the model and makes it the active sheet's model.
data.solverReset (Reset All) removes the active sheet's model. Each is
one undo step.
The Solver Parameters dialog has Reset All and Load/Save buttons; the
dialog can also be opened with fields that go over the saved model.
* Data: Solver Reset All also clears a model read from workbook-level names
A sheet's Solver model can come from workbook-level names, which every
sheet without a model of its own reads. Reset All removed only the
sheet-level names, so such a model stayed and the dialog showed it
again.
Removing the workbook-level names would change every other sheet that
reads them. Reset All instead leaves them in place and writes an empty
sheet-level solver_opt over them on the active sheet only; the result
says masked: true. saved_model now reads a sheet's own names when the
sheet has a solver_opt, and the workbook-level names only otherwise,
never a mix of both, and treats an empty solver_opt as no model. The
mask survives XLSX and is replaced when a model is saved on the sheet.
* Data: Solver Save Model clears the rest of a longer model saved at the same cell
Saving a model over a longer one saved at the same cell left the old
model's last rows on the sheet, so Load Model from that cell read the new
options row followed by stale constraint rows and refused the range.
Save Model now clears what is left of a model saved there before (only
when those cells hold a complete model written by Save Model, and never
the new model's own cells), keeping the cells' formatting, in the same
undo step. Load Model reading down from one cell also stops at the
options row, so formulas just below a saved model no longer break it.
* Data: Solver Load Model keeps the Evolutionary convergence and generations
Save Model writes Convergence and the generations without improvement in
its options row and Load Model reads them, but the sheet's saved model
(hidden names) did not hold them, so after Load Model, or any solve,
they fell back to their defaults. The saved model now keeps them for the
Evolutionary method: Convergence as solver_cvg, which means the same in
Excel, and the generations as gridcraft_solver_stall, because Excel's
solver_mni is a time in seconds. Saving a model again and Reset All
remove the GridCraft name with the solver_* names.
* Data: Solver Load Model refuses a range with a gap
Load Model from a range of several cells kept only the cells that hold a
formula, so the rows below a cell without one moved up. A constraint cell
overwritten by a constant gave a model without that constraint, and an
empty cell before the options row gave the default options, both without
an error. Load Model now refuses a range in which a cell before the last
formula holds no formula, and names that cell. Empty cells after the
model are still allowed.
* Data: Solver removes only its own names when it saves or resets a model
Saving a model (by a solve or Load Model) and Reset All removed every
name of the sheet that starts with solver_, so a user's own name such as
solver_budget was deleted with the model. They now remove only the
Solver's names: the ones Excel's Solver writes (solver_opt, solver_adj,
solver_lhs1, solver_rel1, solver_rhs1 and so on) and GridCraft's own.
The names are matched by name rather than by the hidden flag, so a model
whose names lost that flag is still replaced in full.
* Data: Solver Save Model refuses a place where the options cannot spill
The options row that Save Model writes is an array constant of eight
values, which spills into the seven cells to the right of its first
cell. Content in any of those cells blocked the spill and the options
cell showed #SPILL!. Save Model now checks the whole spill range before
it writes anything and refuses, naming the cell, when a cell there holds
content or another formula's spilled values or is a cell of the model,
when merged cells or a table meet the row (a dynamic array cannot spill
into a table), or when the range runs past the last column. It also
refuses a place where the model's column would cover another formula's
spilled values, which that formula would lose to #SPILL!. The options of
a model saved at the same cell before may be replaced, as before.
* Data: Solver Reset All and Load Model drop the old model's options
Reset All cleared the model fields of the Solver Parameters form but
kept the Evolutionary options (Convergence, Mutation Rate, Population
Size, Random Seed, generations without improvement and Require Bounds),
and Load Model kept any of them that the loaded model omits, such as all
of them for a GRG Nonlinear or Simplex LP model. A new Evolutionary model
then solved with the old options, for example with Require Bounds off.
Both now remove the model's options from the form first (one list of
their keys), so an option the model doesn't set takes its default.
* Data: Solver Save Model asks before it replaces data
Save Model wrote its formulas over whatever the model range held.
It is now refused, with the sheet unchanged, when a cell of the
range holds a value or a formula (a model saved there before
included), unless `overwrite: true` is passed. The message names
the first such cell and carries the same "already holds data"
phrase as Data Analysis, so the Solver Parameters dialog asks
"Replace it with the model?" with Replace and Don't Replace. The
question belongs to the range it asked about: editing the range,
Load or Reset All drops it. The check runs after the spill checks,
so the question is asked only when replacing would succeed. A save
remains one undo step.
Tests: the engine test refuses a value, a formula and an earlier
model, accepts only a true boolean, and undoes and redoes the
replacing save in one step; the dialog test covers Don't Replace,
an edited range and Replace. Both fail without the change.
* Data: Solver Load Model and Reset All tests for limits and undo
Tests for behaviour already in place: reading down from one cell of
a column of 5,000 formulas stops after the most rows a model takes,
a range larger than a model is refused before any cell is read, and
malformed or hostile cells and ranges (unbalanced brackets, an
overflowing number, an unknown sheet, 10,000 nested brackets, a
non-text `from`) each give an error and leave no model. Undoing
Reset All brings the model back with its options (the population
size).
* Data: Solver Load Model refuses a model without its options row
Load Model from one cell read down to the first cell without a
formula, and a range dropped its trailing cells without formulas.
A constraint cleared in the middle of a saved model, or its options
row cleared or replaced by a constant, therefore left a prefix of
the model, which was loaded as the whole model with default options
and replaced the sheet's model. Every load now requires the model's
last row to be the options row ({...}) that Save Model writes last;
otherwise it is refused, naming the cell without a formula when
reading down from one cell, and the sheet's model stays as it was.
The test clears a middle constraint, clears the options row and
replaces it by a constant, loads from the first cell and as two
ranges, and checks after each refusal that the old model (three
constraints, Simplex LP) is unchanged. It fails without the change.
* Data: Solver Options
The Solver Parameters dialog's Options button shows the Solver Options
in the same window: Max Evaluations and Integer Optimality for all
methods, and Convergence, Mutation Rate, Population Size, Random Seed,
Maximum Generations without Improvement and Require Bounds on Variables
for Evolutionary. OK keeps the changes for the next solve; Cancel
restores them.
The evaluation limit and Integer Optimality are now part of the model:
they are saved in the hidden names (solver_itr, which counts evaluations
in place of iterations, and solver_tol) and in the options row of Save
Model. Both accept numbers or text, as the other options do.
* Data: Solver keeps its own limits out of Excel's Solver names
The evaluation limit was saved as solver_itr. Excel uses that name for
its iteration limit (100 by default), so a workbook saved by Excel would
give GridCraft 100 evaluations and stop its search early. GridCraft now
saves the evaluation limit as gridcraft_solver_evals, which Excel
ignores, and no longer reads solver_itr. Saving a model again and Reset
All remove it with the other model names. Integer Optimality
(solver_tol) keeps Excel's name, as its meaning is the same.
* Data: Solver Reset All also resets the Solver Options
Reset All removes the model's options from the Solver Parameters form,
the Solver Options fields (the evaluation limit, Integer Optimality and
the Evolutionary options) and Require Bounds, so the next Solve uses the
defaults. It now also removes the copy of the options that Options keeps
for Cancel. A test checks that the options are gone after Reset All and
that Options then shows the defaults.
* Data: Solver reads Integer Optimality with a percent sign as percent
Integer Optimality is given in percent, but text such as "5%" was read
by the number parser as 0.05 and then divided by 100 again, so the
solver used 0.05 % instead of 5 %. A trailing percent sign is now
dropped before the number is read, so "5", "5%" and 5 all mean 5 %.
* Data: Solver Options closes with Escape back to the Solver Parameters
Escape in the Solver Options view went to the shared dialog handler,
which closed the whole Solver dialog: the options were not restored and
parameter edits made before opening Options were lost. Escape (and
closing the window) in Solver Options now does what Cancel does: it
restores the options and returns to the Solver Parameters. Escape in the
parameters still closes the dialog.
* Data: Solver keeps the Evolutionary options when another method solves
Solver Options sets the Evolutionary options whatever the solving
method, but the saved model and the model in data.solver's result held
them only for the Evolutionary method. A GRG Nonlinear or Simplex LP
solve (which saves the model by default) dropped them, and switching
back to Evolutionary brought back the defaults. They are now saved and
returned for every method. Two tests that expected them to be absent
for other methods now check their values.
* Data: Solver Options keeps its OK and Cancel row at button height
The Solver Options' OK and Cancel row was a right-to-left layout placed
straight in the window, which takes all the height it is offered, so
the buttons sat well below the last option and the window was taller
than its content. The row is now wrapped in a horizontal row as tall as
the buttons, as the other form dialogs do (ok_cancel).
The window's height now changes when it switches between the parameters
and the options, and the window re-centres over the next frames, so the
test that switches back and forth lets a few frames pass after each
switch before it clicks.
* Data: Solver Parameters keeps its Solve and Close row at button height
The Solve and Close row was a right-to-left layout placed straight in
the window. The window keeps its size when its content gets shorter, as
it does when the Load/Save area or a note is hidden again, and that
layout then filled the space left over, so Solve moved further below
the last row. The row is now a horizontal row as tall as the buttons,
as ok_cancel and the Solver Options do.
* Data: Solver dialog opened in its options sets them up as the Options button does
Opening the Solver dialog straight in the Solver Options (optionsView:
true) only changed the title. It skipped what the Options button does:
filling each option the form lacks with its default and keeping the
current values for Cancel. With no saved model the fields were blank,
and Cancel or Escape found nothing to restore, so the edits stayed and
the next Solve used them. The button and the dialog now share one
function for this.
* Data: Solver reads Integer Optimality back without floating-point noise
Integer Optimality is stored as a fraction, and the product with 100 is not exact for many percents (0.07 * 100 is 7.000000000000001). The percent is now rounded to 1E-10 % wherever it is read back: the saved model, the solve's model params and Save Model's options row.
* Data: Solver reads whole-number options back as integers
The model's numeric options were returned as floating-point JSON, so after a solve the Solver Options showed 20000.0, 100.0, 0.0 and 50.0. Values read from the hidden names, and Integer Optimality in the solve's result, are now JSON integers where they are whole, and the dialog shows 20000, 100, 0 and 50.
* Data: Solver test checks the model saved by the second solve
The test of Excel's iteration and time limits ignored the result of
its second `data.solver` call and checked only names the first call
had already created. It now reads the saved model afterwards and
checks the values the second call changed (Simplex LP and an
evaluation limit of 700). The call itself still fails, as Simplex LP
refuses the nonlinear model, after the model is saved.
* Data: Solver Load Model refuses an options row cut short
The options row of a saved model was read leniently: a missing value
or one that isn't a number took its default, and values after the
sixteenth were not read at all. A row cut short or edited by hand,
such as ={1}, therefore loaded the model with default options in
place of the saved ones (here: GRG Nonlinear in place of Simplex
LP). The row must now hold at least the eight numbers Save Model
writes (method, non-negative, population size, mutation rate, random
seed, require bounds, convergence, generations without improvement),
and every value in it, however many, must be a number; otherwise
Load Model is refused and the sheet's model stays as it was. Only
the first sixteen values are kept. More numbers than eight are still
read, so a row with options a later version adds loads too.
The test loads rows of one value, seven values, a text value among
the eight, after them and after the sixteenth, and a TRUE, from the
first cell and as a range, checking the old model after each
refusal, and a row of ten numbers, which loads. It fails without the
change.
---------
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
* Data: Solver Load/Save Model and Reset All
data.solverSaveModel writes a model (the sheet's saved model, or one
given as data.solver params) down a column of its sheet as formulas:
the objective and goal (=MAX(...), =MIN(...) or =cell=value), the
variable cells (=COUNT(...)), one =AND(relation) per constraint, which
shows TRUE while the constraint holds, and the method and its options
as an array constant. It refuses a range that overlaps the model's
cells or runs off the sheet.
data.solverLoadModel reads such a range (or reads down from its first
cell), checks the model and makes it the active sheet's model.
data.solverReset (Reset All) removes the active sheet's model. Each is
one undo step.
The Solver Parameters dialog has Reset All and Load/Save buttons; the
dialog can also be opened with fields that go over the saved model.
* Data: Solver Reset All also clears a model read from workbook-level names
A sheet's Solver model can come from workbook-level names, which every
sheet without a model of its own reads. Reset All removed only the
sheet-level names, so such a model stayed and the dialog showed it
again.
Removing the workbook-level names would change every other sheet that
reads them. Reset All instead leaves them in place and writes an empty
sheet-level solver_opt over them on the active sheet only; the result
says masked: true. saved_model now reads a sheet's own names when the
sheet has a solver_opt, and the workbook-level names only otherwise,
never a mix of both, and treats an empty solver_opt as no model. The
mask survives XLSX and is replaced when a model is saved on the sheet.
* Data: Solver Save Model clears the rest of a longer model saved at the same cell
Saving a model over a longer one saved at the same cell left the old
model's last rows on the sheet, so Load Model from that cell read the new
options row followed by stale constraint rows and refused the range.
Save Model now clears what is left of a model saved there before (only
when those cells hold a complete model written by Save Model, and never
the new model's own cells), keeping the cells' formatting, in the same
undo step. Load Model reading down from one cell also stops at the
options row, so formulas just below a saved model no longer break it.
* Data: Solver Load Model keeps the Evolutionary convergence and generations
Save Model writes Convergence and the generations without improvement in
its options row and Load Model reads them, but the sheet's saved model
(hidden names) did not hold them, so after Load Model, or any solve,
they fell back to their defaults. The saved model now keeps them for the
Evolutionary method: Convergence as solver_cvg, which means the same in
Excel, and the generations as gridcraft_solver_stall, because Excel's
solver_mni is a time in seconds. Saving a model again and Reset All
remove the GridCraft name with the solver_* names.
* Data: Solver Load Model refuses a range with a gap
Load Model from a range of several cells kept only the cells that hold a
formula, so the rows below a cell without one moved up. A constraint cell
overwritten by a constant gave a model without that constraint, and an
empty cell before the options row gave the default options, both without
an error. Load Model now refuses a range in which a cell before the last
formula holds no formula, and names that cell. Empty cells after the
model are still allowed.
* Data: Solver removes only its own names when it saves or resets a model
Saving a model (by a solve or Load Model) and Reset All removed every
name of the sheet that starts with solver_, so a user's own name such as
solver_budget was deleted with the model. They now remove only the
Solver's names: the ones Excel's Solver writes (solver_opt, solver_adj,
solver_lhs1, solver_rel1, solver_rhs1 and so on) and GridCraft's own.
The names are matched by name rather than by the hidden flag, so a model
whose names lost that flag is still replaced in full.
* Data: Solver Save Model refuses a place where the options cannot spill
The options row that Save Model writes is an array constant of eight
values, which spills into the seven cells to the right of its first
cell. Content in any of those cells blocked the spill and the options
cell showed #SPILL!. Save Model now checks the whole spill range before
it writes anything and refuses, naming the cell, when a cell there holds
content or another formula's spilled values or is a cell of the model,
when merged cells or a table meet the row (a dynamic array cannot spill
into a table), or when the range runs past the last column. It also
refuses a place where the model's column would cover another formula's
spilled values, which that formula would lose to #SPILL!. The options of
a model saved at the same cell before may be replaced, as before.
* Data: Solver Reset All and Load Model drop the old model's options
Reset All cleared the model fields of the Solver Parameters form but
kept the Evolutionary options (Convergence, Mutation Rate, Population
Size, Random Seed, generations without improvement and Require Bounds),
and Load Model kept any of them that the loaded model omits, such as all
of them for a GRG Nonlinear or Simplex LP model. A new Evolutionary model
then solved with the old options, for example with Require Bounds off.
Both now remove the model's options from the form first (one list of
their keys), so an option the model doesn't set takes its default.
* Data: Solver Save Model asks before it replaces data
Save Model wrote its formulas over whatever the model range held.
It is now refused, with the sheet unchanged, when a cell of the
range holds a value or a formula (a model saved there before
included), unless `overwrite: true` is passed. The message names
the first such cell and carries the same "already holds data"
phrase as Data Analysis, so the Solver Parameters dialog asks
"Replace it with the model?" with Replace and Don't Replace. The
question belongs to the range it asked about: editing the range,
Load or Reset All drops it. The check runs after the spill checks,
so the question is asked only when replacing would succeed. A save
remains one undo step.
Tests: the engine test refuses a value, a formula and an earlier
model, accepts only a true boolean, and undoes and redoes the
replacing save in one step; the dialog test covers Don't Replace,
an edited range and Replace. Both fail without the change.
* Data: Solver Load Model and Reset All tests for limits and undo
Tests for behaviour already in place: reading down from one cell of
a column of 5,000 formulas stops after the most rows a model takes,
a range larger than a model is refused before any cell is read, and
malformed or hostile cells and ranges (unbalanced brackets, an
overflowing number, an unknown sheet, 10,000 nested brackets, a
non-text `from`) each give an error and leave no model. Undoing
Reset All brings the model back with its options (the population
size).
* Data: Solver Load Model refuses a model without its options row
Load Model from one cell read down to the first cell without a
formula, and a range dropped its trailing cells without formulas.
A constraint cleared in the middle of a saved model, or its options
row cleared or replaced by a constant, therefore left a prefix of
the model, which was loaded as the whole model with default options
and replaced the sheet's model. Every load now requires the model's
last row to be the options row ({...}) that Save Model writes last;
otherwise it is refused, naming the cell without a formula when
reading down from one cell, and the sheet's model stays as it was.
The test clears a middle constraint, clears the options row and
replaces it by a constant, loads from the first cell and as two
ranges, and checks after each refusal that the old model (three
constraints, Simplex LP) is unchanged. It fails without the change.
* Data: Solver Load Model refuses an options row cut short
The options row of a saved model was read leniently: a missing value
or one that isn't a number took its default, and values after the
sixteenth were not read at all. A row cut short or edited by hand,
such as ={1}, therefore loaded the model with default options in
place of the saved ones (here: GRG Nonlinear in place of Simplex
LP). The row must now hold at least the eight numbers Save Model
writes (method, non-negative, population size, mutation rate, random
seed, require bounds, convergence, generations without improvement),
and every value in it, however many, must be a number; otherwise
Load Model is refused and the sheet's model stays as it was. Only
the first sixteen values are kept. More numbers than eight are still
read, so a row with options a later version adds loads too.
The test loads rows of one value, seven values, a text value among
the eight, after them and after the sixteenth, and a TRUE, from the
first cell and as a range, checking the old model after each
refusal, and a row of ten numbers, which loads. It fails without the
change.
---------
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
A PivotTable has an Enable show details option, set with the new
pivot.options command ({pivot?, enableShowDetails?: bool}). While it is
off, pivot.showDetails and double-clicking a value cell list no records:
the double-click shows a message and does not open the cell for editing.
Labels and headers still edit. Changing the option is one undo step and
does not refresh the report. pivot.fields reports the setting.
XLSX files keep it: an off option is written as enableDrill="0" on the
pivotTableDefinition, and enableDrill is read on open (on when absent).
.xls (Excel 97-2003) import used only each cell's number format. It now
also reads the BIFF8 formatting records (Font, XF, Palette and Style),
so opened sheets keep their fonts, solid and pattern fills, borders
(including diagonals), alignment (rotation, indent, wrap, shrink),
locked and hidden protection, the workbook's custom colour palette, its
Normal font as the default, and its user-defined cell styles.
The decoding lives in a new xls/styles.rs; xls/mod.rs gains the record
arms and the build call. Short or malformed formatting records keep the
fields present and add one warning instead of refusing the workbook.
Tests build the records in code, including truncation and byte mutation.
Also merges origin/main, keeping its dialog-sheet, WINDOW2 and XF
number-format handling; the XF arm now goes through the new styles
module, which covers the number format too.
- The workbook's active sheet is an atomic set in place (Workbook::active_sheet /
set_active_sheet), so a window swap or sheet switch never clones the
Arc<Workbook> or marks it dirty. Selections already live in DocState and the
window views. Save records the sheet of the most recently active window.
- A dialog taken out of its window while it runs goes back to that window when
a command run from it switched windows (dialogs::show, ui.dialog.confirm).
- view.arrangeAll {arrange?: tiled|horizontal|vertical|cascade, activeWorkbook?}
returns the visible windows, active first; the desktop moves and sizes the
native windows over the main window's monitor. New Window and Arrange All
buttons on the View ribbon; Arrange Windows dialog.
- Docs: ui-parity, hardware-parity, gaps #20, target-app-parity, ROADMAP.
The Japanese catalog's ribbon labels the review flagged are already in the head
("Save (⌘S)" is 上書き保存 (⌘S), "Insert\nSlicer" is スライサーの\n挿入, and the
catalog test asserts the new value), so only the docs needed work: docs/gaps.md
had no revision row for the §11 Japanese-catalog update. Add one dated
2026-10-20, and set the "Last updated" header of ROADMAP.md, docs/gaps.md and
docs/localization-parity.md to the same date as their new rows. Every existing
revision row keeps its original date.
The Japanese catalog still lived inline in i18n.rs with its ribbon and widget
labels, so with the interface set to 日本語 the dialog titles and labels, message
boxes, Backstage/File-view items, template names and native menus showed in
English. This moves it to i18n/ja.rs and adds the 545 keys the Brazilian
Portuguese catalog translates beyond it: 943 keys, the coverage pt-BR has
(~43% of ~2,200 strings), in Excel for Mac 日本語版 wording.
CORE keeps the shared reference set every catalog covers, verbatim and in the
same order (the cross-catalog coverage test still points at it); DIALOGS holds
the new strings, and the lookup checks it first. One test parses pt.rs's source
so the two catalogs cannot drift apart again, one checks that every key is
unique across the two lists and every value is translated, and one spot-checks
the high-value strings.
Docs: the Japanese row and the "Where we are" bullet in
docs/localization-parity.md (943, ~43%), a revision row, the ROADMAP Languages
paragraph and progress log, and gaps.md §11.
gaps.md §6 still listed four things as missing and function-parity.md still
marked 15-significant-digit comparison as missing, citing #57 — all five
reports are closed and their PRs merged. The work list reads as the place to
pick work from, so a closed entry sends someone after work that is done.
Checked by behaviour, not by issue state, where that was possible:
=0.1+0.2=0.3 -> TRUE
=(0.1+0.2)-0.3 -> 5.55E-17 (full precision kept,
as in Excel: the 15-digit rule
is for comparison)
=MATCH(0.3,{0.30000000000000004},0) -> 1
=COUNTIF({0.30000000000000004},0.3) -> 1
a spill blocked and then unblocked -> #SPILL! then the spill again,
with its dependent back to 6
and by their regression tests for the other two:
`deleting_a_3d_span_end_sheet_keeps_the_rest` (#140) and
`sheet_operations_keep_names_on_their_sheets` (#134).
§6 is left open rather than deleted: it says wrong numbers are the worst kind of
bug, and five closed reports are not the same as the category being clear —
that needs §15's oracle suite. The function counts are untouched; this is
formula-language semantics, not the inventory.
Prepare report data before editing so refused reports cannot leave solution cells or the saved model changed. Commit accepted reports with the optional solution and model, retaining array/protection checks and row autofit after sheet insertion.
Closes#1050
Co-Authored-By: OpenAI Codex <noreply@openai.com>
The Formulas section had the calculation-mode radios and Enable iterative
calculation but not the two limits that formulas.calculationOptions already
takes. They now sit under the checkbox, disabled while iteration is off, and
commit when the field loses focus. Like Excel, out-of-range entries
(Maximum Iterations outside 1-32767, a negative or non-numeric Maximum
Change) are refused with a message instead of being clamped by the command;
the Enter that committed the field no longer also dismisses that message.
Labels and messages are translated for every interface language. A kittest
covers the disabled state, valid and invalid entries, and undo refreshing
the field. Drops the stale "no Options dialog yet" from gaps.md and
function-parity.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A category range two or more columns wide beside a column of values (year beside month, Excel's
multiLvlStrRef) was read as one flat list: 36 rows in two columns became 72 categories, the
series sat in the left half of the plot and the years and months shared one row of labels.
Saving wrote the range as a plain strRef, so Excel lost the two-level axis too.
- gridcraft_core::category_levels: the shape of a category range beside its values (levels are
columns when the points run down the rows, rows when they run along the columns; up to three
outer levels), shared by the chart and xlsx crates.
- ChartData.category_levels: the outer levels, nearest the labels first, one entry per category,
non-empty where a group starts. resolve fills it; a single column is unchanged.
- render: the outer levels in rows under the labels, a group's name centred under its categories
with a separator at each boundary; in bar charts in columns beside the labels.
- xlsx: <c:cat> written as multiLvlStrRef with the level caches (innermost first), so the axis
survives a round trip.
Tests in core (shapes), chart (resolve and layout for columns, bars and a row of values) and
xlsx (written XML, read-back, stability, a single column stays strRef). chart-parity, gaps § 4
and the ROADMAP progress log updated.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
With two or more value fields the Σ Values pseudo-field can sit in Rows
as well as Columns, at any position among the row fields. The model
records it (`PivotTable.values_on_rows`, `values_position`) and the
engine lays it out like Excel in compact, outline and tabular form: one
row item per value field at the Σ Values level, per-value subtotals
("East Sum of Sales") and grand totals ("Total Sum of Sales").
XLSX reads `dataOnRows` and the `-2` field's place in rowFields or
colFields and writes them back; the "values on rows are shown on
columns" warning is gone. `pivot.moveField` moves "Σ Values" between
Rows and Columns or within one, axis field moves keep it in place, and
the PivotTable Fields pane lists it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Builds on the Solver of #327. data.solver takes reports: [answer, limits]
and writes them on new sheets before the model's sheet once a solution
is found. The Answer report lists the objective and variable cells with
their original and final values and each constraint's value, formula,
status (Binding or Not Binding) and slack; cells are named by the
nearest labels to their left and above. The Limits report minimises and
maximises each variable with the others held at the solution, under the
model's constraints, and gives the objective at both ends (Simplex LP
and GRG Nonlinear, without integer constraints).
data.solverReport writes the reports for a given solution and model,
so data.solver's result (which now carries the original values and the
model) can be passed to it as is. The Solver Results dialog offers the
two reports; they are written after Keep Solver Solution or Restore
Original Values.
Builds on the Solver of #327. method: evolutionary runs a genetic search
for models that aren't smooth: tournament selection, blend crossover and
Gaussian mutation inside the variable bounds, feasibility-first ranking
and integer rounding, then a compass search around the best member. It
stops when the population converges, when the best member stops
improving for a number of generations, or at the evaluation budget. A
seeded generator makes runs repeatable. Population size, mutation rate,
random seed, convergence and Require Bounds are options; the method and
its options are saved in the hidden solver_* names. The Solver
Parameters dialog offers the method.
Model: Series.trendlines (Vec<Trendline>, serde default) with kind
(linear, exponential, logarithmic, polynomial 2..6, power, moving
average 2..255), name, forward/backward forecast, set intercept,
equation / R² display and line colour, width and dash.
XLSX: read and write <c:trendline> in CT_Trendline child order, placed
after dLbls and before the data references in line, bar, area, scatter,
bubble and stock series; unknown types are skipped.
Chart: least-squares fits (transformed for exp/log/power, skipping
non-positive values; polynomials via normal equations on centred,
scaled x with partial pivoting), moving averages, forecasts that widen
the category or x axis, clipping to the plot, equation and R² labels and
legend entries ("Linear (Sales)"). Degenerate data draws nothing.
Engine: chart.addElement element="trendline" adds (type, series, order,
period, forward, backward, displayEquation, displayRSquared) or removes
trendlines; document.inspect lists each chart's trendlines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
