* Objects: one selection for charts, pictures, shapes and slicers, with eight resize handles
The sheet tracked the selected object as a bare id in `selected_chart`, so
only charts and text boxes drew a selection frame, only the bottom-right
corner resized, and the kind of the selected object had to be guessed from
the id. The selection is now `SheetApp::selected_object: Option<ObjRef>`,
with `selected_chart()` kept for the Chart Design tab and the Format Chart
pane.
- Model: `ObjKind` (chart, image, shape, slicer) and `ObjRef { kind, id }`;
`Sheet` helpers find, move and remove an object by `ObjRef` and walk every
object's anchor in a fixed order. `next_object_id` saturates instead of
overflowing on an id at `u32::MAX` read from a file.
- Commands: `object.delete`, `object.move` and `object.setAnchorMode` accept
the four kinds through one parameter check, refuse an unknown kind or id
instead of succeeding silently, and clamp hostile offsets. `object.delete`
replies with the deleted object. Arrange and the Selection Pane include
slicers, which stack above the other objects.
- Sheet: the selected object of any kind draws a frame with eight handles
over every object. Each handle resizes only its own edges, which never
cross; the body moves the object, and the first drag frame already applies
the pointer's movement. The pointer shows the handle's resize cursor or a
move cursor, with the diagonals swapped on a right-to-left sheet, where the
frame moves with its object.
- Keys: Escape drops the object selection; Delete and Backspace keep
deleting the selected object (#213). A selection whose object disappears
(undo, redo, delete, sheet switch) is cleared.
- Double-click: `open_object` routes by kind (a text box edits in place, a
chart opens Format Chart).
- Control protocol: `ui.inspect` reports `selectedObject {kind, id}` and
keeps `selectedChart`; `ui.object.select` selects any object and replies
with its rect. The snapshot example takes `--object <id>`.
Tests: engine tests for every kind by kind and id, the Selection Pane and
hostile parameters; UI tests for selecting each kind (a slicer over a chart
takes the click), all eight handles on four kinds, cursors, Delete,
Backspace and Escape, undo and redo, double-click routing, and resizing on a
right-to-left sheet. Existing tests use the new selection API.
* Objects: every kind follows edits; chart series follow cut-moves and sheet deletes
Structural edits and sorts kept three hand-indexed lists (charts, images,
shapes) in step in two places, and slicers were left out of both, so a
slicer stayed put when rows were inserted above it. Chart series were
rewritten for inserted and deleted lines and for sheet renames, but not for
cut-moves or sheet deletes, which left them pointing at the old cells.
- Inserting and deleting rows and columns and sorting walk
`Sheet::object_anchors` and `object_anchors_mut`, one fixed order over
every kind, so slicers now follow their cells by their anchor mode like
the other objects, and a new kind cannot be forgotten in one of the
passes.
- `rewrite_cell_links` is the one place that rewrites the references
floating objects hold (chart series values, categories and names,
and the source block a chart was made from).
`rewrite_all_formulas` calls it, which covers inserting and deleting
lines and cells and cut-moves on one sheet or across sheets; renaming and
deleting a sheet call it too, so a series into a deleted sheet becomes
#REF!, as a formula does.
- Copying a sheet gives its charts, pictures, shapes and slicers fresh ids,
keeping ids unique across the workbook, which object selection and the
`{kind, id}` commands rely on.
Tests: every kind through row and column inserts and deletes, an absolute
shape, a sort and undo; a slicer through inserted rows; chart series
through a cut-move, a sheet rename, a sheet delete and undo; ids after a
sheet copy.
* Objects: bubble sizes follow edits like the other series references
`rewrite_cell_links` rewrote a chart series' values, categories and name
but not its bubble sizes, so inserting or deleting lines, a cut-move or a
sheet rename left a bubble chart's sizes pointing at the old cells. They
are now rewritten with the rest.
Test: bubble sizes through an inserted row, a cut-move and a sheet rename.
* Objects: a resize handle under the headers leaves the press to them
A selected object's handles reach a few points outside it, and a press
was matched against them before any check of where it landed, so a press
on the column or row header beside an object at the sheet's edge resized
the object instead of selecting the column or row. The cursor already
ignored handles outside the cells.
`chartview::selected_handle` finds the selected object's handle under a
point only over the cell area, as `hit` does, and not while objects are
hidden; the press and the cursor both use it.
Test: presses within a handle's reach over the column header and the row
header neither move nor resize the object.
* Objects: each drag of an object is its own undo step
A drag merges its frames into one undo step by dropping a new step whose
label matches the one before it. Its first frame did the same, so a second
drag of an object (a move after a move, or a resize after a move) merged
into the first drag's "Move Object" step, and one undo took back both.
`Drag::Object` records whether the drag has made its step; only the later
frames of the same drag merge into it.
Test: a move and then a resize of a picture take two undos to reverse,
the first restoring the moved picture.
* Objects: the parity and gap docs no longer list chart resizing as missing
gaps.md (§4), target-app-parity.md (the Essentials tier's work, the
Mainstream chart row, the interaction discount and the Essentials chart
task) and chart-parity.md (the element table and the work list) still
described charts as impossible to resize (#190). Charts move and resize
from eight handles like every floating object, so those statements now
say so; the 2026-10-10 revision rows and the 10-10 re-check stay as
history. Scores and the 40-60 h chart estimate are unchanged (resizing
was 1-2 h, within the rounding).
* Objects: one chart evidence paragraph in gaps.md; trendlines are not missing
gaps.md §4 carried two evidence paragraphs, an older one saying PRs #158
and #161 were open and a newer one saying all 2-D kinds survive XLSX round
trip, both repeating the resize, smooth-line, Switch Row/Column and
trendline statements. It is one paragraph with the current status again.
The Mainstream chart row in target-app-parity.md listed trendlines as
missing; they are read, written and drawn (`Series::trendlines`, the XLSX
chart reader and writer, `chart.addElement`), as chart-parity.md records.
The row now says so and keeps "no axis options". No score change.
* Objects: only the selected object's handles resize; a press elsewhere on an object moves it
A primary drag looked for a handle under the press on whatever object it
grabbed, so pressing near the edge or corner of an object that was not
selected started a resize, while the pointer over that spot showed the
Move cursor (handles are only shown, and only offered by the cursor, on
the selected object). The press now takes its handle from
`chartview::selected_handle`, the same lookup the cursor uses; a press on
any other object selects and moves it.
Test: dragging an unselected shape by its bottom-right corner shows the
Move cursor, then selects and moves the shape without resizing it.
* Docs: ui.object.select says what it replies when it clears the selection
* Objects: a test pins that both anchor accessors visit the same objects in the same order
Sorting and row or column edits read every anchor through
`object_anchors`, compute the new ones and write them back through
`object_anchors_mut` in step. Nothing checked that the two accessors
visit the same objects in the same order; a kind of floating object
reaching only one of them would have paired objects with other objects'
anchors silently.
Test: two objects of every kind are inserted in a mixed order, each
anchor is marked with its position through the mutable accessor, the
marks are read back through the shared one in the same sequence, the
count matches the per-kind collections, and the mark is found on the
object `object_anchor` names by kind and id. The test's constructor
matches on `ObjKind` exhaustively, so a new kind does not compile until
the test covers it.
* Objects: sorting keeps the size of a "move and size" picture whose lines swap places
A picture anchored to move and size with cells and spanning two rows
(or columns) was re-fitted between its top-left and bottom-right lines
after a sort. When the sort put the bottom line above the top one, the
fitted extent was negative and the picture collapsed to a zero height
or width. It now keeps its old size on that axis and travels with its
top-left line, like a "move only" picture.
Tests: for a sort by rows and one by columns, "move and size" and
"move only" pictures inside one line travel with it (the first
re-fitted to the same line, the second at its own size), an absolute
picture stays while the cells move under it, a two-line picture whose
lines swap keeps its size, and undo restores every anchor.
* Objects: a copied sheet's objects get free ids even when a file used the largest id
`Workbook::next_object_id` returned one more than the largest id in use,
saturating at `u32::MAX`. A workbook read from a file can carry an object
with that id; every later insert (a chart, picture, shape, table or
slicer) then got `u32::MAX` again, and so did each object of a copied
sheet, whose ids also came from a saturating counter. Lookups and
selection take the first object with an id, and `object.delete` removes
every one.
`Workbook::free_object_ids(count)` now returns distinct unused ids: those
above the largest in use while they last, then the lowest free ones from
1. `next_object_id` takes the first of them, and the sheet copy takes one
per copied object (and refuses if the id space were ever exhausted). The
model test that recorded the saturation now checks the free ids instead,
and a new one covers a file that used the largest ids: the free ids come
from below, 100,000 of them distinct and in order.
Test: object_ids_stay_unique_when_a_file_used_the_largest_id gives a
shape id u32::MAX, inserts two shapes and copies the sheet; every shape id
is distinct across both sheets. It fails without the fix (both new shapes
get 4294967295).
* Objects: main's chart data table compiles with the object selection and the model's object test
Two leftovers of the merge of origin/main (25881a8e), neither a textual
conflict: `Chart` gained a `data_table` field, which the `push_object`
helper of the model's object test did not set (it is `None`, as in
`insert.chart`); and chart_data_table.rs set the `selected_chart` field
this branch replaced by `selected_object`. The test selects its chart as
a floating object, as the branch's other tests do.
* Objects: object.move and chart.set keep a size a file made larger than 10,000
`object.move` clamped `width` and `height` to 10,000 points, the most it
gives a new size, while the XLSX reader accepts anchors far past that.
A resize of a picture a file made 12,000 wide passed 11,990 through the
clamp and jumped to 10,000; `chart.set`, whose Format Chart pane sends
the unchanged dimension back with the edited one, clamped the same way.
Each dimension is now capped at 10,000 or the object's current size,
whichever is larger (`size_cap`): such an object keeps its size when it
is moved, shrinks by what a resize asks and never grows further, and a
hostile size is still capped. The params doc of `object.move` and the
control protocol notes say so.
Tests: an_oversized_imported_object_keeps_its_size_when_moved_and_shrinks_only_by_a_resize
makes a picture 12,000 by 300, writes and reads it back as a file, then
moves it without a size (12,000 stays), asks 12,010 (stays 12,000),
11,990 (11,990, no jump) and 50,000 by 50,000 (11,990 by 10,000).
chart_set_keeps_a_chart_size_a_file_made_larger_than_the_limit does the
same through `chart.set`. Both fail without the fix (width 10,000).
* Objects: dragging an object's body sends its position only, not its size
`drag_object` sent `width` and `height` with every step of a body drag,
so moving a picture a file made 12,000 wide shrank it to the 10,000 that
`object.move` gives a new size. Only a handle drag sends a size now; a
body move leaves the engine's size alone.
Tests (real input): dragging_the_body_of_an_oversized_imported_object_keeps_its_size
reopens the workbook with a 12,000 by 60 picture, drags its body by
30 by 25 and checks the size is untouched, the picture moved with the
pointer and the journaled `object.move` carries no width or height; it
fails without the fix (the journaled command carries both, and without
the engine's cap the picture is 10,000 wide).
a_handle_drag_on_an_oversized_imported_object_resizes_by_the_drag_only
moves the left handle 10 px right: the picture is 10 points narrower in
the window and keeps a width near 12,000, with no jump to the limit.
* Objects: the Format Chart Size fields show a chart's real size and send only the edited dimension
The Width and Height fields ranged 40 to 4,000 and sent both values on
every edit. egui clamps an existing value into a field's range, so a
chart a file made 12,000 wide showed "Width 4000", and typing a new
height sent that 4,000 as the width: the chart shrank although only its
height changed, and the cap `chart.set` keeps for an existing size
cannot help once the pane itself sends 4,000. Each field's range now
reaches the larger of 4,000 and the chart's current size, so the field
shows the real size, and a commit sends only the dimension that differs
from the chart's (`chart.set` reads `width` and `height` independently).
Test (real input): the_size_fields_keep_an_oversized_imported_chart_width_when_the_height_changes
reopens a workbook with a 12,000-wide chart, opens Format Chart Area's
Size section, checks the Width field shows 12000 and types 201 as the
height: the width stays 12,000, the height is 201 and the journaled
chart.set carries no width. Without the fix the field shows
"Width 4000".
- The workbook's active sheet is an atomic set in place (Workbook::active_sheet /
set_active_sheet), so a window swap or sheet switch never clones the
Arc<Workbook> or marks it dirty. Selections already live in DocState and the
window views. Save records the sheet of the most recently active window.
- A dialog taken out of its window while it runs goes back to that window when
a command run from it switched windows (dialogs::show, ui.dialog.confirm).
- view.arrangeAll {arrange?: tiled|horizontal|vertical|cascade, activeWorkbook?}
returns the visible windows, active first; the desktop moves and sizes the
native windows over the main window's monitor. New Window and Arrange All
buttons on the View ribbon; Arrange Windows dialog.
- Docs: ui-parity, hardware-parity, gaps #20, target-app-parity, ROADMAP.
The offscreen snapshot never started the background font scan the app runs
from its first frame, so a workbook's installed fonts (Helvetica Neue, say)
were drawn in the Calibri substitute. Catalog them up front and run a few more
frames so they bind, as in the app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add a Czech table with all 266 interface labels (the same key set as
Korean, Russian, Simplified Chinese and Brazilian Portuguese) and
register `cs` in Language: name "Čeština", code `cs`, system tags
`cs-*` / `cs_*`, appended to the end of the switcher. The language
command help, its error text and the snapshot example usage list `cs`.
Like the other ribbon tables, it covers the ribbon, sheet tabs and
widgets; dialogs, menus and messages stay English. Formulas stay
canonical English: Czech uses the English formula locale like every
non-Spanish language.
Translated from the meaning of each English label (clean-room, not from
another product's localization), with AI assistance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View › Page Layout (and the status-bar button) now shows the sheet as printed
pages on a desk instead of overlaying page outlines on the grid.
- Model/XLSX: per-sheet view mode (normal / pageLayout / pageBreakPreview),
saved as <sheetView view="…"> and read back. view.* commands set it per
sheet ({sheet?}) without an undo step or dirtying a clean workbook.
- Engine: paper::PageGrid paginates the sheet from A1 with the print
pagination (print::split_bands, shared with PDF export and printing) and
maps cells to pages and back; header/footer section helpers
(split/join, &[Page] field names) shared with the PDF header code.
pageLayout.headerFooter takes {part, section, text} for one section and a
sheet; header/footer strings are capped at 255 characters.
view.ruler toggles the rulers.
- UI: Geo carries the page grid, so painting, hit-testing, selection,
editing, objects and scrolling work through the page transform; frozen
panes are ignored in this view. Pages with margins and gaps, "Click to add
data" pages, rulers in inches (English) or centimetres, headers/footers
drawn on printed pages, click a margin section to edit it in place; a
click elsewhere commits (one undo step), Escape cancels. Header & Footer
contextual tab: presets, Page Number, Number of Pages, Current Date/Time,
File Path, File Name, Sheet Name, Go to Header/Footer. View › Ruler.
- New strings in every catalog; new code-drawn icons; desk colour token.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Merge the fixed#104 branch (which carries #31 and #38) and restructure
the Brazilian Portuguese language onto its per-language layout:
- The PORTUGUESE table moves, unchanged, to crates/ui-egui/src/i18n/pt.rs
as pt::translate, like zh/ko/ru. Language::PtBr gets code() "pt"
(parse also accepts pt-BR/pt_BR via the tag reduction); it is still
saved as "pt".
- No per-language command: the View combo and the control channel switch
with app.language.set {"language": "pt"} (app.language.portuguese is
dropped); error text, engine.commands params and the snapshot example
list every code.
- pt.rs covers the keys added since (Page Layout|Orientation, the display
theme combo, and the Sheet Options View/Print checkboxes, Exibir /
Imprimir); the coverage test checks pt like zh/ko/ru.
- people.toml keeps both new contributor entries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds PtBr to the interface-language system from #31: a PORTUGUESE table
covering the same 259 chrome strings as JAPANESE (a test keeps the two
tables in step), Excel's pt-BR wording throughout, "pt"/"pt-br" codes
(serde-stored as "pt"), Português (Brasil) in the switcher, the
app.language.portuguese command, and first-run detection of a pt-BR
system locale via the existing tag reduction.
Add an interface-language preference. It defaults to the system's
language on first run (sys-locale, native only) and is switched by hand
from the View tab, next to Dark Mode, or with app.language.english /
app.language.japanese over the control channel. It is saved in ui.json.
Follows the filmcraft house convention: a Language enum and a
table of English-to-Japanese strings with English fallback, so coverage
can grow incrementally. Japanese chrome renders without any bundled
font: the CJK fallback faces already appended to every family cover
kana and kanji.
The ribbon chrome all flows through the small_button/big_button/
toggle_button/split_button/icon_button helpers and menu_items, so
translating there localises the whole ribbon in one place; the language
of the frame is read from egui context data (i18n::current). Command
ids, file names and document text are never translated.
* About: contributors compiled in from contributors.json (grab bag + table, sortable, name toggle)
Adds an About GridCraft dialog (tabs About · Contributors · Models) following the craftrules
standard (standards/contributors.md): contributors/contributors.json is generated by
craftrules/scripts/contributors.py and baked into the binary by crates/ui-egui/build.rs as
static tables. Each contributor line: @username, opt-in display/real name, PRs, commits,
lines +/−/Δ, binary assets +/−, first/last commit. Sortable by every column; alphabetical
ignores case and the leading @.
Reachable from the macOS app menu (About GridCraft, previously a web link), Help ▸
Contributors…, and Automate ▸ About GridCraft in the ribbon (all platforms and the web).
Dialog hyperlinks open through the host's open_url service. The snapshot example gains
--dialog 'name={json}' for offscreen renders of dialogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors: self-submitted names in contributors/people.toml; AGENTS.md credit-yourself section
build.rs reads contributors/people.toml next to the generated contributors.json and shows a name only
for entries the generator verified as written by that person (craftrules standards/contributors.md).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors: regenerate (verified people.toml entries)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- ui-egui: title bar with QAT, full ribbon (Home/Insert/Draw/Page Layout/Formulas/Data/
Review/View/Automate + Table/Chart Design), formula bar with Name Box, virtualised grid
(frozen panes, overflow, borders, CF data bars/scales/icons, tables, sparklines, filter
buttons, charts/pictures/shapes), in-cell editor with point mode, reference colouring,
autocomplete and argument hints, sheet tabs, status bar, dialogs, control channel
- apps/sheetcraft: desktop app (control server, file dialogs, prefs, drag & drop)
- chart: toolkit-free chart layout/rendering for 25 chart kinds + sparklines + rasteriser
- mcp + sheetcraft-cli: MCP server (headless or bridged) and CLI (info/convert/eval/cat/run/mcp)
- xtask (ci/layers/assets/wasm/version/parity), release workflows, packaging, placeholder icon
- automatic row heights
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pranav