`object.move` clamped `width` and `height` to 10,000 points, the most it
gives a new size, while the XLSX reader accepts anchors far past that.
A resize of a picture a file made 12,000 wide passed 11,990 through the
clamp and jumped to 10,000; `chart.set`, whose Format Chart pane sends
the unchanged dimension back with the edited one, clamped the same way.
Each dimension is now capped at 10,000 or the object's current size,
whichever is larger (`size_cap`): such an object keeps its size when it
is moved, shrinks by what a resize asks and never grows further, and a
hostile size is still capped. The params doc of `object.move` and the
control protocol notes say so.
Tests: an_oversized_imported_object_keeps_its_size_when_moved_and_shrinks_only_by_a_resize
makes a picture 12,000 by 300, writes and reads it back as a file, then
moves it without a size (12,000 stays), asks 12,010 (stays 12,000),
11,990 (11,990, no jump) and 50,000 by 50,000 (11,990 by 10,000).
chart_set_keeps_a_chart_size_a_file_made_larger_than_the_limit does the
same through `chart.set`. Both fail without the fix (width 10,000).
ROADMAP.md, docs/chart-parity.md, docs/gaps.md, docs/target-app-parity.md, docs/ui-parity.md: the header change notes combine this branch's note with main's, dated today; main's revision and progress rows stay and this branch's rows are re-dated on top. Code merged without conflict.
Add command and UI controls for chart data tables, shared chart and PDF rendering, and native XLSX persistence. Cover live values, blanks, formatting, alignment, undo/redo, bounds and table flags with regression tests.
Co-Authored-By: Codex <noreply@openai.com>
The sheet tracked the selected object as a bare id in `selected_chart`, so
only charts and text boxes drew a selection frame, only the bottom-right
corner resized, and the kind of the selected object had to be guessed from
the id. The selection is now `SheetApp::selected_object: Option<ObjRef>`,
with `selected_chart()` kept for the Chart Design tab and the Format Chart
pane.
- Model: `ObjKind` (chart, image, shape, slicer) and `ObjRef { kind, id }`;
`Sheet` helpers find, move and remove an object by `ObjRef` and walk every
object's anchor in a fixed order. `next_object_id` saturates instead of
overflowing on an id at `u32::MAX` read from a file.
- Commands: `object.delete`, `object.move` and `object.setAnchorMode` accept
the four kinds through one parameter check, refuse an unknown kind or id
instead of succeeding silently, and clamp hostile offsets. `object.delete`
replies with the deleted object. Arrange and the Selection Pane include
slicers, which stack above the other objects.
- Sheet: the selected object of any kind draws a frame with eight handles
over every object. Each handle resizes only its own edges, which never
cross; the body moves the object, and the first drag frame already applies
the pointer's movement. The pointer shows the handle's resize cursor or a
move cursor, with the diagonals swapped on a right-to-left sheet, where the
frame moves with its object.
- Keys: Escape drops the object selection; Delete and Backspace keep
deleting the selected object (#213). A selection whose object disappears
(undo, redo, delete, sheet switch) is cleared.
- Double-click: `open_object` routes by kind (a text box edits in place, a
chart opens Format Chart).
- Control protocol: `ui.inspect` reports `selectedObject {kind, id}` and
keeps `selectedChart`; `ui.object.select` selects any object and replies
with its rect. The snapshot example takes `--object <id>`.
Tests: engine tests for every kind by kind and id, the Selection Pane and
hostile parameters; UI tests for selecting each kind (a slicer over a chart
takes the click), all eight handles on four kinds, cursors, Delete,
Backspace and Escape, undo and redo, double-click routing, and resizing on a
right-to-left sheet. Existing tests use the new selection API.
Brings in the macro interface: the Macros dialog and editor, the
Automate ribbon section, drag-and-drop of macro steps, and the
macro overlay on the grid. Ported into the split module layout on main.
Clippy gate: moved wildcard imports to explicit lists, named the
test edit tables, boxed the overlay layer tuple, switched the editor
to craft_ui::ComboBox per clippy.toml, and simplified an is_some_and
in the LP solver.
Inputs, the output and a Repeat's range were bound once, by sheet index and coordinates. A step
that inserted a sheet in front of an input's sheet sent every later token to the new sheet, and
rows inserted above an input left the tokens on the cells that moved into its place; the run
wrote into the wrong cells and reported success.
- Commands record the structural edits they make as they rewrite references (`Ctx::edits`; while
a macro step runs, `DocState::edits` collects them).
- After each step the machine matches the sheets as the run's guard does and moves the inputs,
the output and the ranges of the Repeats in progress by those edits, with the formula engine's
own adjustment.
- A step that deletes an input's or the output's cells, or their sheet, or changes the size of a
range a Repeat is going over, stops the run, which rolls back.
- Test: `inputs_and_the_output_follow_their_cells_when_a_step_moves_them` (a sheet inserted in
front, rows inserted above, an input deleted, a Repeat's range grown).
Insert > Line or Area and the All Charts list offer 100% Stacked Area,
and insert.chart and chart.set take it as type area with subtype
stacked100. Each series' area stacks on the ones before it as its
share of the category's total. When every series on the value axis is
100% stacked and no value is negative, the axis runs from 0% to 100%.
A blank cell counts as zero, and a category whose total is zero stays
on the baseline.
An XLSX area chart with percentStacked grouping now opens as 100%
stacked and is saved back as percentStacked. It used to open as a
stacked area and was saved as stacked.
Writing a note or comment on a cell that already has one of the same kind
replaced the whole thread: Edit Comment lost the replies, the resolved state
and the dates, and Edit Note the box read from the file. Now only the text
(and the author, when the command names one) changes, as Excel's Edit Note
does; a note written over a comment still replaces it.
Home > Format as Table on a cell or range inside an existing table
failed with "A table can't overlap another table." Excel applies the
picked style to that table instead. The command now returns that table
and its range, as it does for a new table. A range crossing a table's
edge is still rejected.
Without a range, the active area of the selection decides, as it does
for Insert > Table. The native Format menu's Format as Table now runs
home.formatAsTable instead of insert.table.
- The workbook's active sheet is an atomic set in place (Workbook::active_sheet /
set_active_sheet), so a window swap or sheet switch never clones the
Arc<Workbook> or marks it dirty. Selections already live in DocState and the
window views. Save records the sheet of the most recently active window.
- A dialog taken out of its window while it runs goes back to that window when
a command run from it switched windows (dialogs::show, ui.dialog.confirm).
- view.arrangeAll {arrange?: tiled|horizontal|vertical|cascade, activeWorkbook?}
returns the visible windows, active first; the desktop moves and sizes the
native windows over the main window's monitor. New Window and Arrange All
buttons on the View ribbon; Arrange Windows dialog.
- Docs: ui-parity, hardware-parity, gaps #20, target-app-parity, ROADMAP.
crates/engine/src/cmd/insert.rs: kept both sides: PR #884's is_string_literal and cf_style_json, and PR #2022's check_cf_* before edit(); 884's kept string literals parse
The reader took only <x:Visible/> from a note's VML shape and vml_xml
wrote every note with a fixed anchor (two columns right of the cell,
four rows tall) and a 108 x 59.25 pt style, so a plain open and save
moved and resized every note box Excel had stored.
Comment gets an optional NoteBox: the <x:Anchor> corners relative to the
note's cell (so the box follows the note when rows or columns move) and
the shape's width and height. The writer puts it back, clamped to the
sheet; notes made here, and boxes equal to the default, keep the
default box.
Every edit copies the workbook for its undo step (copy-on-write: sheets
and 64-row bands of cells are shared). A floating picture's bytes
(Image.data) and the VBA project (Workbook.vba_project) were plain
Vec<u8>, so each edit on a sheet with a picture, and every edit in a
workbook with macros, kept another full copy of them, up to the 100
steps of the history. They are Arc<Vec<u8>> now, as cell pictures
already are, with base64 helpers for serde (b64::shared, b64::opt). JSON
and XLSX are unchanged.
Measured on macOS 27 (Apple M3 Max), gridcraft-cli, kernel peak
footprint: a 19 MB picture and 50 cell edits on its sheet, 992 -> 22 MB;
10 edits, 215 -> 21 MB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Found while testing crates/engine/src/cmd/insert.rs:477
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`style: {fill: "none"}` (or "auto") went through the colour pass and came out as a solid
fill in the automatic colour. `home.fillColor` reads the same word as no fill, so the rule
style does too now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
home.conditionalFormat deserialized `style` straight into the model's
Style, so a programmatic caller had to write colours as {"Rgb": 16773836}:
"#FFF2CC", which format_range, colorScale and dataBar take, was refused
with a serde message naming internal types. A key the struct doesn't have
(`style: {preset: …}`, `fillColor`) was dropped, which saved a rule with an
empty format that matches and shows nothing. And a cellIs `value` already
written as a string literal ("\"Closed\"", as in the file and openpyxl)
was quoted again into the text "Closed" with its quotes, so it never
matched.
`style` colours (font, fill fg/bg, borders) may now be "#RRGGBB",
{theme, tint} or "auto", and `fill` may be a colour alone (a solid fill);
a fill colour with no pattern is solid. Unknown keys and a non-object
`style` are refused. A cellIs value that is one string literal is kept.
The model's own shape keeps working.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
home.manageRules took the number of rules once, before deleting, so
{"delete":0,"moveUp":1} with two rules swapped past the end of the
shortened list and panicked (index out of bounds; the session's guard
kept the workbook). The count is now taken after each step.
prxnvt