A command that changed the workbook cleared the redo history even when an open group owned
its step. When the group was then rolled back inside the same command (the debugger's Stop
with Undo Changes), the rollback put the redo history back and the command's bookkeeping cleared
it again. Now only a command that makes a step of its own clears the redo history; a group
clears it when it ends as a step, and a rollback restores it.
The record of the last group step (document, history length, epoch) outlived the Undo of that
step. A later command that opened and closed its own groups at the same history length, after
rolling one back, passed the epoch check (the record's epoch merely differed from the one the
command started with) and took the name of the nested edit it had made instead of its own.
The step must now come from a group ended during the command (an epoch past the command's
starting one), and a rollback drops a record of a step it truncated away.
When the history held 100 steps, group_end pushed its step and dropped the oldest one at once,
so execute's collapse compared against a length that no longer matched. A command that was one
group kept the group's step and added its own, losing two old steps. After test.editThenGroup,
the second Undo brought back the intermediate state after the outside edit.
The history limit now applies after the outermost command has collapsed its steps, and when a
group ends outside any command. A document with an open group is trimmed when the group ends.
execute treated any change in the group epoch as 'the group owns the step'. A command that edited outside its own group, or whose group rolled back before it edited, left that edit with no undo step or only part of it. Now only a group that was open before the command (or is still open after) owns the step; a command that opened and closed its own groups replaces their steps with one entry for the command.
Active content such as macros must not run only because a workbook was
opened. DocState gets a trust state: Local for workbooks made in the
session (new workbooks and samples) and FromFile for anything opened
with file.open. Active content in a FromFile workbook asks before it
runs. A second window on a workbook shares its trust.
The clipboard carries the trust of its source document. Pasting
formulas, formats (conditional formats hold formulas) or validation
from a FromFile workbook into another workbook makes that workbook
FromFile too; pasting values, column widths or notes carries nothing
active and changes nothing. Sheet moves and copies stay inside one
workbook, so its trust is unchanged. document.inspect reports the trust.
A macro recorder needs more than a journal index: the journal is
trimmed past 10,000 entries, it also holds the commands that other
commands run (so playback would run them twice), and it keeps no
selection, which relative references need.
Session now tracks how deeply execute calls are nested. While recording,
a buffer (record.rs) keeps each successful, journaled top-level call with
the document uid, the active sheet (index and name) and the selection it
ran in, then its id and parameters without secrets, as the journal
stores them. Queries, failed commands and the command that starts
recording are not kept. The buffer holds up to 100,000 steps and counts
any it drops. Session::start_recording, stop_recording, is_recording and
depth are the interface.
Automate › Record Actions keeps recording through the journal as before.
Session::grouped(label, f) runs f as one undo step on the active
document. On success the group leaves exactly one undo entry holding the
workbook from before the group; on error it restores the workbook,
selection, undo and redo stacks as they were and returns the error.
group_begin, group_end and group_rollback do the same across separate
calls, for an action that runs one step per call.
While a group is open on a document, undoable commands on it add no
undo steps of their own, so a long group neither grows the history nor
pushes older entries past the undo limit, and Undo and Redo are
disabled there. Groups nest: the outermost one makes the step, and a
failing inner group rolls back only its own changes. Closing a document
drops its groups, and a command that panics drops the groups it opened.
history.list reports whether a group is open.
Insert Copied Cells folds its nested steps into one undo step by
counting revisions; inside a group the nested steps push no entries, so
it now leaves the history alone there instead of removing entries from
before the group.
- Action::Pending now consults the engine catalog at fire time: silent
no-op while the command is missing, runs it once it exists - no table
edit needed when a future feature lands.
- Stripped stray backticks from 7 pending target ids so catalog lookup
can ever match them.
- gridcraft-engine: doc(hidden) register_test_command hook so UI tests
can prove the go-live path without touching production code.
- Tests: pending_sequences_are_silent_no_ops (no dialog/toast/journal),
pending_sequences_go_live_when_the_command_lands (fake command fires
via its reserved sequence), every_sequence_terminates_without_panicking
(all 413 sequences pressed end-to-end).
Grouped rows and columns now get Excel's outline band beside the headers:
a bracket per group, a -/+ button on the summary line and level buttons
in the corner. The buttons run data.hideDetail / data.showDetail and the
new data.showLevels, so they undo. Hide Detail marks the summary line
collapsed, Show Detail keeps inner groups that were collapsed on their
own, and Group / Ungroup take by: rows|cols. Show Detail and Hide Detail
are on the Data tab and in the Data menu, the group shortcuts are listed
as Alt+Shift+Right / Left, and shortcut lookup reads navigation keys by
their logical key so the numpad arrows work.
Fixes#373
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The model read topLeftCell but the grid always opened at A1 and never wrote
the current scroll back. Sheets now open scrolled to their saved first
visible cell; saves record the current one (and the active cell) without
dirtying the workbook. Frozen panes use the pane's topLeftCell.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Issue #348: copying multiple selections works when the areas line up, and explains when it can't
# Conflicts:
# crates/engine/src/tests.rs
# crates/ui-egui/tests/clipboard.rs
View: Formula Bar and Zoom 100% as engine commands (#289)
# Conflicts:
# ROADMAP.md
# crates/ui-egui/src/control.rs
# crates/ui-egui/src/lib.rs
# docs/target-app-parity.md
Protect Sheet and Unprotect Sheet were journaled with their `password`
param, so the password showed in plain text in the journal dialog and
`engine.journal`, and a recorded script (Automate > Record Actions)
saved it in the workbook's hidden `_sc_scripts` name.
Session::execute now journals the params without secret ones
(`password`, or a name ending in `Password`). A replayed entry runs
without that param: Protect Sheet protects with the same options but no
password, and the matching Unprotect Sheet still succeeds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Copying a multi-area selection always failed in the engine, and the UI
dropped the error, so Ctrl+C did nothing and Ctrl+V had nothing to
paste. Now, as in Excel:
- Areas that cover the same rows (or the same columns) and don't
overlap are copied as one block, slid together left to right (top to
bottom). The clipboard keeps a snapshot with the block packed at the
first area's place; formulas travel as their values, and column
widths or row heights, comments, pictures and merges come along.
- Other layouts, Cut of several areas and Paste Link of a multi-area
copy are refused with "This action won't work on multiple
selections."; Copy and Cut from the keyboard, ribbon and context menus
now show that message instead of failing silently.
- The marching ants go around each copied area.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View › Page Layout (and the status-bar button) now shows the sheet as printed
pages on a desk instead of overlaying page outlines on the grid.
- Model/XLSX: per-sheet view mode (normal / pageLayout / pageBreakPreview),
saved as <sheetView view="…"> and read back. view.* commands set it per
sheet ({sheet?}) without an undo step or dirtying a clean workbook.
- Engine: paper::PageGrid paginates the sheet from A1 with the print
pagination (print::split_bands, shared with PDF export and printing) and
maps cells to pages and back; header/footer section helpers
(split/join, &[Page] field names) shared with the PDF header code.
pageLayout.headerFooter takes {part, section, text} for one section and a
sheet; header/footer strings are capped at 255 characters.
view.ruler toggles the rulers.
- UI: Geo carries the page grid, so painting, hit-testing, selection,
editing, objects and scrolling work through the page transform; frozen
panes are ignored in this view. Pages with margins and gaps, "Click to add
data" pages, rulers in inches (English) or centimetres, headers/footers
drawn on printed pages, click a margin section to edit it in place; a
click elsewhere commits (one undo step), Escape cancels. Header & Footer
contextual tab: presets, Page Number, Number of Pages, Current Date/Time,
File Path, File Name, Sheet Name, Go to Header/Footer. View › Ruler.
- New strings in every catalog; new code-drawn icons; desk colour token.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Model: Sheet.edit_ranges (title, ranges, optional password hash,
security descriptor) and gridcraft_model::password: the ECMA-376 legacy
16-bit hash and the salted, iterated SHA-2 hash (SHA-512/384/256; other
algorithms, damaged hashes and spin counts over 10,000,000 are refused).
New passwords use SHA-512, spin count 100000. Adds the sha2 crate.
- XLSX: <protectedRanges> read and written; an unreadable password keeps
the range locked.
- review.allowEditRanges {action: list|add|modify|delete|unlock, ...}: empty
params list; ranges can't change while the sheet is protected; unlock
verifies the password for the session. Not journaled (passwords).
- Locked-cell checks (commit guard, cell.set, picture in cell) let edits
through in open or unlocked ranges; ranges move with structural edits.
- Ribbon button and a form dialog (menu invocation only).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A value field can be a calculated field whose formula is evaluated on
the sums of the fields it names for each report cell (Excel's documented
semantics). Command to add/change/delete, dialog from the field pane,
XLSX cacheField formula round trip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- view.zoom100 sets the active sheet's zoom to 100% (the ribbon's 100%
button runs it).
- view.formulaBar {on?} toggles a formulaBar preference (Prefs, saved in
prefs.json on desktop; an application option, not in the file). The UI
shows the formula bar from it; the ribbon checkbox, native menu and
ui.set {formulaBar} go through the command.
- The UI-only interceptions and their entries in engine.commands are gone,
so the CLI and MCP can run both. Parity checklist regenerated (260 / 290).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New command home.insertCopiedCells: makes room at the active cell and
pastes the clipboard there, as one undo step. Whole copied rows or columns
insert whole rows or columns; a copied block shifts the cells down or right
(Insert Paste dialog from the menu). A cut of whole rows or columns moves
them and closes the gap (Insert Cut Cells). The cell and header context
menus show the entry while the clipboard holds a copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- review.previousComment / review.nextComment select the previous/next
threaded comment in reading order (row by row), across visible sheets in
tab order, wrapping around; disabled when the workbook has no comments.
- review.showComments {on?} toggles the Comments pane as session state, so
the CLI, MCP and control channel can drive it; the UI pane follows it.
- review.showAllNotes {on?} displays every note (session display setting,
not saved in the file).
- review.convertToComments turns every note in the workbook into a threaded
comment with the same author and text, as one undoable edit.
- Ribbon: Previous/Next and a Show Comments toggle in the Comments group;
Show All Notes and Convert to Comments in the Notes menu. Strings in all
catalogs. Parity checklist regenerated (263 / 290).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Spreadsheets put an HTML table next to the tab-separated text; Excel
(x:num) and LibreOffice Calc (sdval) record each cell's number there.
Paste now reads the HTML flavour (new paste_html host service, arboard on
desktop) and edit.paste takes an optional html param: a field that would
paste as text becomes the recorded number when the HTML cell shows the
same text, with an inferred format ("Rp"#,##0.00) that renders it back
identically.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- ui-egui: title bar with QAT, full ribbon (Home/Insert/Draw/Page Layout/Formulas/Data/
Review/View/Automate + Table/Chart Design), formula bar with Name Box, virtualised grid
(frozen panes, overflow, borders, CF data bars/scales/icons, tables, sparklines, filter
buttons, charts/pictures/shapes), in-cell editor with point mode, reference colouring,
autocomplete and argument hints, sheet tabs, status bar, dialogs, control channel
- apps/sheetcraft: desktop app (control server, file dialogs, prefs, drag & drop)
- chart: toolkit-free chart layout/rendering for 25 chart kinds + sparklines + rasteriser
- mcp + sheetcraft-cli: MCP server (headless or bridged) and CLI (info/convert/eval/cat/run/mcp)
- xtask (ci/layers/assets/wasm/version/parity), release workflows, packaging, placeholder icon
- automatic row heights
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
prxnvt