The batches a session keeps for apps that reconnect were bounded only by count on a desktop host
and a private figcraft-server (`max_log_bytes` defaulted to usize::MAX). It now defaults to
64 MiB, and figcraft-server takes it from a new `max_log_mb` setting (default 64; open to the
public, also at most a quarter of `max_file_mb` as before). An app behind the trimmed log catches
up with a snapshot, as it already did past the count limits. The protocol is unchanged.
Nine 8 MiB renames with default limits: all 75.5 MB kept before, 58.7 MB after.
Fixes#1069
The browser build's wasm was 25,982,540 bytes, past the gate raised for 0.12.1. It is now
23,915,213 bytes (22.8 MiB), 1.2 MiB under the restored 24 MiB gate:
- Catalog rows keep their plural forms behind a reference: Text is two words, not room for
four strings, across ~52,000 baked-in rows (-454 KB).
- The browser build compiles with wasm SIMD (apps/figcraft-web/.cargo/config.toml, wasm-opt
--enable-simd), so egui's glyph rasterizer leaves out its scalar SIMD fallback (-1.6 MB).
The plugin workspace is built from the repository root and stays without SIMD.
- Revert the gate raise (cb227c97); the hosting guide names the WebAssembly SIMD requirement.
winit's default macOS app menu ends the process through AppKit's
`terminate:` at once, so ⌘Q and Quit from the menu bar never asked about
unsaved changes (the recovery copies were all that survived).
- Install craft-libs' app menu (craft-menu, same rev as the other
craft-libs pins; macOS only). Its Quit sends the main window a close
request, the same path as the window's close button, so
windows::on_close_request cancels the close and the unsaved-changes
question asks first. Failure to install keeps winit's menu and logs it.
- windows_tests::a_quit_with_unsaved_changes_waits_for_the_answer pins
the contract the menu relies on: a close request with unsaved changes
sends CancelClose and asks; Don't Save then closes.
- Like the close button it closes the main window only: with several
windows open, each quit closes one (documented).
- docs/hardware-parity.md macOS row, status line and revision history.
- Cargo.lock: craft-menu, craft-quit, craft-keymap, muda and their deps;
cargo's own minimal resolution also moves a few windows-sys/getrandom
edges to versions already in the lock.
The pixel cap reads only the PNG's header, so a small image followed by a
large tail of data passed it and was copied and base64-encoded whole.
MAX_CLIPBOARD_PNG_BYTES (256 MB, the same cap as design data read from the
clipboard) is checked on the NSData length before the copy on macOS, and
again in the paste path so every Services implementation is held to it.
A PNG past the cap is treated like an unreadable one: paste falls back to
the decoded image.
Comments become the task queue for an attached or headless MCP client: comment.prompt returns a bounded Markdown brief, the Comments panel gains Copy for AI, and the MCP server exposes fix_comments, watch_comments, figcraft://comments and wait_for_changes. Mutating comment.* commands append to a bounded in-memory event log; the control channel's events.poll long-polls it without the UI thread, and a successful batch commits its events only if the whole batch lands. No model, network dependency, asset or file-format change.
`run_command {"command": "inspect.code", "args": {...}}` ran the command
without its params, on the selection. MCP tool arguments are now checked
against each tool's input schema (and the objects it describes inside,
such as a batch's steps; open objects like `params` take anything), and
a step key other than `command`, `params` and `as` is refused in
command.batch, figcraft-cli scripts and the MCP batch tool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A density now counts only within 0.005 of a whole 2x-4x multiple of
72 dpi. That covers the rounding of pixels per metre (144 dpi is stored
as 5669 or 5670) and rejects nearby resolutions: 141, 143 and 145 dpi
were read as 2x under the old 0.05.
Paste falls back to the decoded clipboard image when the clipboard's PNG
can't be read, instead of pasting nothing.
Also the line on what the objc2 crates are for, and the ROADMAP row for
the new placing default.
A placed image was always fitted into 1000 px on its longer side, so a
screenshot of a 1440 px wide page came in at 1000 px and stopped lining
up with the design it was taken from. Figma places an image at its pixel
size and only scales down a side past 4096 px.
Placing now does the same, and reads the screen density a PNG records:
macOS screenshots carry 144 dpi (pHYs), so an 800 x 600 px capture of a
400 x 300 pt area comes in at 400 x 300, as in Figma. Only whole 2x-4x
multiples of 72 dpi count as a screen density; 300 dpi print scans and
other values keep their pixel size. The image data stays at full
resolution, so exports at 2x and up stay sharp.
On macOS, pasting reads the clipboard's public.png as is instead of the
decoded pixels arboard returns, which drop the density (and the colour
profile). Other platforms keep the decoded image.
Files dropped, Place image, paste and image.place all go through the
same path; an explicit width/height still wins.
Two gaps CodeRabbit found in the guard:
- `same_file` compared paths, plain and resolved. A second hard link to
the file is a different path to the same data, so `convert`,
`run --out` and Save As to the link passed the guard and truncated
the file. It now asks the file system (same-file: device and inode on
Unix, volume and file index on Windows). same-file was already in the
lock through walkdir.
- `run --in X --out X` checked the tab the script left active. A script
that ends on `file.duplicate` or `file.new` leaves a tab with no count
of images left in X, so X was written over. The count is now taken
when X is opened and checked against `--out` whatever tab is active;
the active tab's own file is still checked as before.
The script check is a separate function so it can be tested without a
file past the 4 GiB budget.
A native file whose images together pass IMAGE_BUDGET (4 GiB, or 20,000
images) opens without the images past it. They are intact in the file, but
saving it again wrote the archive from the images in memory, so every
save, autosave or `convert` onto itself deleted them for good. A 7.6 GiB
`.fig` converted to a 7.3 GiB `.figcraft` reopened with 1,312 of its 2,337
images: one save would have dropped the other 1,025.
Loading now tells images left out for the budget apart from damaged ones
(`Loaded::images_past_budget`). A tab opened or reverted from such a file
remembers the file, and saving over it is refused with a message that says
how many images would be lost and to save under another name; saving a copy
elsewhere works, and the original keeps its images. Auto-save skips the
tab instead of retrying and failing every minute. `figcraft-cli convert`
and `run --in X --out X` refuse to write over their input the same way.
The same file is matched by its resolved path, so `./a.figcraft` and
`a.figcraft` count as one (`file_access::same_file`).
The note for each image left out for the budget now says it stays in the
file, which can't be saved over without losing it. Damaged and missing
images keep the old wording: they can't be kept, and saving drops them as
before. The doc comment on report_lost_images said saving always drops
the images it reports, which is no longer true for budget ones, so it went.
This stops the data loss; it doesn't make such files editable in place.
Loading images on demand would, and is discussed in the issue this links.
Tests: the count and the note for both budgets; saving over the file
refused with the file unchanged, Save As then working, and saving back over
the original refused again; a snapshot encoded in the background refused
too; a tab without images left out saving as before. Checked by hand on the
7.3 GiB file with file.save, file.saveAs, convert and run --out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat: startup update prompt modal and direct self-updating
The update flow (check at start or on request, the startup prompt, the self-update worker) is craft-update's Updater; the app only supplies the suite, its close path and its status window. The check at start is opt-in for the desktop app, an install holds back while documents are unsaved, and the Windows update helper runs before argument parsing.
Ref: storytold/craft-libs#319
* fix(updates): re-add the update hooks to the 0.37 frame loop
* fix(updates): address review feedback
Wake the UI when a manual check is queued from a menu callback; the update prompt owns the keyboard while it is open (LightCraft); Download opens through the desktop URL hook (FilmCraft); the Help menu dispatches through menus::invoke (FigCraft); print jobs and comment drafts hold an install back (WordCraft); Check for Updates is a registered command (GridCraft); an install holds back while documents are unsaved.
* fix(updates): show the prompt on Home and presenter frames and close the application, not one window
* fix(updates): add the update strings to the English catalog
* E21: require release font coverage and stabilize capture deadline tests
* E21: separate capture, IME and field-save regression phases
* M0: correct the migration qualification reference
* M-egui037: document input lifecycle and UI regression contracts
* M0: correct egui 0.37 status docs and stabilize join-code regression
---------
Co-authored-by: Dylan M. Taylor <dylan@dylanmtaylor.com>
Co-authored-by: Codebuff <noreply@codebuff.com>
BFlat