Document::next_name summed max + 1 over numbers parsed from existing layer
names, and bump_name did the same for the duplicate-rename path: a document
(or peer, or node.set) holding a layer named "Frame 18446744073709551615"
overflowed both (panic in debug, wrap to a wrong name in release). next_name
now collects the numbers it sees and, when the counter is spent, picks the
lowest free number (mirrors new_style_id); bump_name only bumps when the
number can step, else falls to its existing " 2" branch.
Tests: next_name_never_overflows (doc) and
duplicating_a_layer_named_past_the_counter_does_not_overflow (engine panel
behaviour).
With the Move tool, the filled area under the pointer is hatched with "/" lines in the selection colour (1.4 px), clipped by the area's own fill rule so holes stay clear. The hatch goes when the pointer is 3.5 px from a point or 2 px from a segment (screen pixels at any zoom); between those clearances and the 6 px hit radius the area wins. Bezier handles, the transform box's handles and other edited layers' parts come first. Line spacing follows octave folding: 8 px at every power-of-two zoom, growing with the zoom and stepping back at sqrt(2) * 2^n. The pattern is anchored to the vector's origin, so it stays on the shape when panning, and several selected areas share one pattern. The last area listed wins where areas overlap, and only vectors with a visible fill have areas.
A click selects an area with its points; they move with it (drags, nudges, the Design panel) but keep the unselected look and show no handles. Shift adds an area or takes a selected one out (its own points go, points selected on their own or shared with another selected area stay). A press on a selected area drags everything selected, as one undo step; Escape puts it back. Drags show no hover hatch. Any other press without Shift drops the areas and the points selected only through them, and a click on an empty spot such as a hole clears them and stays in edit mode. Inside the transform box around points selected on their own, the box keeps its drag unless the area is already selected. Area indexes are dropped when the network's topology changes; moving points keeps them.
The network gets region walking, an inside test per region by its own fill rule, the region under a point, a region's points and a topology fingerprint (vector_regions.rs). The engine does hit testing and lays out and clips the hatch in screen space (vectoredit/regions.rs); the canvas only draws the lines. vector.edit.select takes regions, and vector.edit.state reports regions, regionVertices and regionHover. Tests: vector_regions_tests (doc) and regions_tests (engine), covering fill rules, overlap, curves, reversed segments, clearances at 100% and 400%, selection, drags, undo and cancel, and the hatch spacing at seven zoom levels, its direction, anchoring, coverage and clipping.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
validate() now reports children listed twice, pages with a parent, and
nodes not reachable from a page (cycles, detached subtrees). repair()
drops repeated children, clears page parents and removes every node not
reachable from a page in one linear pass, replacing the orphan loop.
Co-authored-by: Justin John <babyjjbabyjj549@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A behaviour suite for the layers panel and the Assets panel written from the public documentation
(table rows with one-line derivations; rows the documentation is silent on say so and pin today's
behaviour), and the fixes it found.
- Engine suite `crates/engine/src/panels_behaviour_tests.rs` (6 tests, about 50 rows): reordering
and moving layers into frames, groups and auto layout, refused drops, renaming several layers,
show/hide and lock rules, pages and dividers, Assets folders, hidden-from-publishing names, drops.
- Panel suite `crates/ui-egui/src/layers_behaviour_tests.rs` (5 tests, driven through egui
headless): click / Shift range / Cmd-Ctrl toggle, Alt-click expand, Collapse layers, sweeping
across eyes and padlocks, the Rename layers dialog, dragging pages, dividers.
Fixes:
- Several layers dropped together in the layers panel land together at the drop point (layers
from apart split around it before).
- Collapse layers (Alt+L) keeps the rows leading to the selection open (it closed everything).
- The eye and padlock no longer vanish when the pointer reaches them (the row lost its hover to
them, so clicks could miss); dragging across eyes or padlocks sets every row passed in one undo
step. Layers inside a locked frame show a faint padlock.
- Several layers selected + Cmd/Ctrl+R / F2 / Rename open a Rename layers dialog (Match, Rename to,
Current name / Number up / Number down buttons, start value, preview) instead of renaming the top
row only.
- `object.batchRename`: `$n` counts up and `$N` down (they were swapped), `$nnn` pads, `start`
sets where numbers start/stop, `regex: true` matches a regular expression with `$1`..`$9`,
`` $` `` and `$'`, and codes work in the replacement too. Returns the new names.
- Pages: dragged up and down the list to reorder; a blank page named with a leading hyphen is a
divider (drawn as a line, never opened, holds no layers); duplicates are named "Copy of ...";
the last page that isn't a divider can't be deleted. `page.list` reports `divider`.
- Assets panel: components filed in folders by page, the frames holding them and the slash parts
of their names (folders fold away; open while searching), tiles show the last name part;
`component.list` gives each component's `folder` and `label` for agents.
- Publishing: a leading `.` or `_` keeps a component (style, collection) out of a library even
after it was published, and removing the prefix brings it back (the previous publish's choice
won before).
The engine gains the `regex` crate (already in the lock file through env_logger) for the
documented regular-expression matching.
A behaviour suite for export and inspect, written from public documentation of design tools'
export settings and developer handoff modes (`crates/engine/src/export_behaviour_tests.rs`,
`crates/engine/src/inspect_behaviour_tests.rs`: 19 tests, 139 table rows and asserts, each with a
one-line derivation; rows where the docs are silent say so and pin today's behaviour). 47 cases
failed on `main`; this PR fixes them in shared code.
**Fixes**
- Export bounds are what a layer paints (`Document::world_render_bounds`, used by every export):
a drop shadow adds room only in the direction it falls (it was a symmetric margin of blur +
largest offset on every side); strokes on rectangles, frames and ellipses reach their real width
(the mitre factor made a centre stroke of 4 add 8 a side); hidden children take no room; a mask
group exports the mask's area.
- Slices export everything visible in their area (they exported an empty image).
- Slashes in layer names export into folders (`icons/close` → `icons/close.png`, folders created;
`.` and `..` segments dropped).
- Copy as PNG copies the whole selection (only the first layer was copied), now from shared code
(`cmd::file::copy_png`).
- Inspect positions are measured from the frame around a layer; groups aren't frames.
**Added (documented options that were missing)**
- Export settings: contents only (off draws every layer showing in the area) and include bounding
box (the layer's own box); SVG: outline text (off writes `<text>` with a `<tspan>` per line),
id attributes (unique), simplified strokes (stroke attributes for centred strokes, and for inside
and outside strokes on boxes and ellipses). Stored per export setting, taken by `file.export`,
`export.add` / `export.update`, `file.exportLayers` and MCP `export`; a "…" popover on each row of
the Export section.
- Inspect: colour formats hex / RGB / CSS / HSL / HSB (`inspect.properties {colorFormat}`, a Color
format dropdown), a Blend row, CSS in rem (`inspect.code {unit, rootFontSize}`, px/rem dropdown),
CSS for rotation, blend modes, gradient directions and kinds (linear angle, radial, conic), text
alignment, case and decoration; icons and images in the asset list (`kind`), exported with
`file.exportLayers {assets: true}`.
**A frames, groups, sections and masks behaviour suite written from the public documentation, and fixes for every divergence it found.** Each documented rule (frames vs. groups when resized, constraints, Cmd/Ctrl-resize, clip content, Frame selection, grouping and ungrouping, group bounds and opacity, X/Y in groups, click targets, drawing a frame or section around layers, dropping into and out of frames, where sections may go, resizing sections, top-level frames as screens and exports, Use as mask, what a mask covers, alpha / vector / luminance masks, groups as masks, clicks on masked-out areas, a mask group's box and exports) is a table-driven case with the result the rule implies and a one-line derivation; where the documentation is silent the case says so and pins today's behaviour.
**Fixes (the suite failed on 7 tests before them)**
- **Masked-out areas don't take clicks**: hit testing and Select layer skip what a visible mask hides (the nearest mask below a layer; for a group or frame used as a mask, what its layers draw), so a click there reaches what's behind. Checked only once something is hit, and skipped in files without a mask (`Document::has_masks`, worked out once after each change), so hit testing costs what it did.
- **A mask group's box and exports are the mask's**: a group's bounds and export area count a mask for the layers it masks (layers under the mask still count), so the selection box, W/H, snapping and PNG/SVG/PDF exports crop to the mask instead of the whole masked layer (`Document::box_children`).
- **Sections stay on the page or in sections**: moving a section into a frame or group (`node.reparent`, refused at the root in `Document::reparent`), dragging one over a frame (it lands in the section around the frame, or on the page), grouping or framing a section, creating a section in a frame and pasting one into a selected frame (it goes on the page) no longer put sections where they can't be.
- **Drawing a frame or section around layers puts them in it**: the layers fully inside the drawn box (its siblings; visible and unlocked; a frame never takes a section; not in auto layout) move into it, in their order, without moving on the page; one undo step.
- **Resizing a section leaves its contents** where they are on the page (no constraints in sections), from a field, a handle (also the left/top edges) or `transform.resize` with any anchor.
- **Cmd/Ctrl while resizing a frame leaves its layers as they are**: #133 (merged in) keeps their places; this branch also keeps their sizes (the frame is resized without running constraints, so a left & right or scale child no longer stretches and is only moved back).
- **X/Y are measured in the frame, not the group**: groups and boolean groups have no coordinate space of their own, so a layer in a group shows (Design panel, `node.get`, `inspect_document`) and takes (`node.set`, `node.create` with a group parent) X/Y in the frame the group is in, or on the page (`Document::frame_relative`). Rotated groups too.
Already there and now covered by the suite: constraints when a frame resizes, groups scaling their layers, clip content (drawing, hits, export size), Frame selection's size and place, grouping/ungrouping keeping world transforms (rotated groups too), nested groups, empty groups going away, group opacity on the composite, click / Cmd-click / double-click targets (frames in sections count as top-level frames), dropping by the pointer and pulling out, group layers staying in their group when dragged, top-level frames as prototype screens and export boards, Use as mask (bottom layer, "Mask group", at the topmost layer's place, single-layer toggle), masks covering every layer above them, hidden masks, alpha / vector / luminance masks, a group as a mask, masks in SVG and PDF exports.
No new commands or UI strings (no i18n changes); each edit stays one undo step.
**A prototyping behaviour suite written from the public documentation, and fixes for every divergence it found.** Each documented rule on triggers, actions, overlays, animations, easing, scrolling and interactive components is a case with what the rule implies and a one-line derivation; where the documentation is silent the case says so and pins today's behaviour. The model rules are table-driven tests in the engine; the player's are driven through egui headless (real pointer, key and timer input into the presenter) or on the player directly.
**Fixes (the suite failed on these before them)**
- **On drag follows its animation**: with a move, push or slide animation, only a drag that way starts it (a drag another way can scroll instead), and the animation follows the pointer while the button stays down, then plays on from there when it lets go (it played by time, and any drag direction fired it).
- **Key combinations**: a key trigger can be a combination (`Shift+K`, `Ctrl+Alt+Delete`, other spellings of the modifiers accepted); the modifiers held must match, so `K` no longer fires for Shift+K. The interaction editor's recorder records the modifiers held, and REST files' modifier key codes import as the combination (they imported as the key alone, with a warning).
- **Overlay timers**: an overlay's after-delay timer starts when the overlay opens, and again each time it opens (it was timed from when the screen under it arrived, so a toast opened late closed at once, and it fired only the first time).
- **Interactive components**: every instance plays the interactions on the variant it shows; an interaction on the instance with the same trigger wins. Before, instances played only interactions copied onto them when placed: an instance placed before its main got interactions did nothing, and one placed after kept the first variant's interactions after changing (a toggle went on but never off). New instances no longer copy them, and copies in older files give way to the variant shown (`proto_run::play_interactions`, on the player's copy).
- **Change to on nested instances** changes the instance whose variant set holds the destination (`proto_run::change_to_target`), not the innermost instance (an icon inside a button).
- **Springs**: the presets are physical springs (mass 1; stiffness / damping gentle 100/15, quick 300/20, bouncy 600/15, slow 80/20; they were ad-hoc curves), and every spring plays until it settles instead of being squeezed into the duration field's time; the settling time accounts for over-damped springs. The interaction editor shows the spring's duration in place of the duration field, with a tooltip.
- **Smart animate overshoot**: matched layers follow spring and back easings past their end and back (they snapped to the end once the curve passed 1).
- **Fixed layers on top**: fixed layers draw and take clicks above the content scrolling under them, wherever they are in the layer list (the file's order doesn't change).
**Missing documented setting, added**
- **Scroll to offset**: `{type: "scrollTo", dest, offset: [x, y]}` stops the layer that far from the top-left of the innermost frame scrolling it (room for a fixed header); X / Y fields in the interaction editor; files carry it only when set.
- Already there and now covered by the suite: click / mouse down / mouse up / while pressing / while hovering / mouse enter / mouse leave / after delay, nested hotspot priority and click-through, navigate (closing overlays), back with the reversed animation, restart, overlay stacking / swap / close / close on a click outside, change to with smart animate, reversed directional transitions, easing curves.
New strings go through `tr(...)` with `en.toml` / `es.toml` entries. No new command ids. The player still draws nothing while idle: the drag-follow only runs during an animation, and fixed layers and instance interactions are worked out once per layout, not per frame.
A 64-case behaviour suite derived from public documentation (sizing, padding, strokes, gaps, alignment, wrap, absolute position, grid, stacking) plus command-level tests. Fixes: frames never shrink below their padding, only the frame's own inside stroke counts when strokes are included (now the default for new auto layout), auto gaps stop at 0, grid fr tracks never go below their content, and canvas stacking (reverseZ) now drives drawing, exports and hit testing. New settings: evenly/around auto gaps, vertical wrap with a column gap, per-child grid cell alignment, strokes included/excluded and canvas stacking in the Design panel.
Clicks on a boolean group test its computed result, so a click in a subtracted hole reaches what is behind it. Layers inside a group, boolean group or instance stay in their parent when dragged (one shared rule). View > Frame outlines and Slices now draw. The idle test's flake came from the render worker clearing its in-flight flag before waking the UI; jobs now carry sequence numbers.
Text layers can follow a path (start offset, flip, alignment; edited in place; canvas, PNG, SVG, PDF; SVG textPath imports as real text on a path). A new pattern paint tiles a source layer in grid or hex rows with scale, spacing and alignment, live as the source changes (SVG pattern, PDF vector tiling pattern).
Boolean operands are editable in place with live results (per-operand operations, cached prefixes so a drag recomputes from the edited operand up); a Design panel Arc section; the shape builder takes strokes and open paths as outlined areas; variable width points can be wider on one side.
- Styles, variables, collections, modes and comment threads created in a live
session take ids from the creator's client space (figcraft_doc::ids: a
number from the node id allocator, client_id << 32 | counter); outside a
session ids are made exactly as before. The server refuses a new entry in
another connected client's space (removed entries can be put back by undo),
keeps removed entries in its saved state, and starts client ids above every
space used by any kind of id.
- Others' text carets and selected characters show on the canvas in their
colour at the glyph positions, with their name above the caret (no blinking,
no frames of their own). Typing in a layer someone else is typing in says so
(toast and tag); collab.peers reports who types where.
- Toasts wrap at a readable width.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M9: real-time collaboration protocol (design)
docs/collab-protocol.md: WebSocket sessions with a server-ordered,
per-property last-writer-wins document sync, client-scoped ids,
fractional positions for children, ephemeral presence (cursors,
selections, follow), per-user undo, hosting from the app first and a
self-hosted server next, and the implementation plan. ROADMAP gains M9.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M9: collaboration core: ids, change sets, server ordering, convergence
Step 1 of docs/collab-protocol.md, no networking:
- Client-scoped node ids: Document::set_client_id makes alloc_id hand out
client << 32 | counter; single-user files allocate as before; the id
counter is no longer part of document equality.
- crates/collab (layer 2): the synced object/property model (every saved
Node field, plus document-level styles, comments, variables, images,
dev snapshots, library data), Change batches, an O(changed) diff, strict
and lenient apply, fractional sibling positions, snapshots.
- Server (ordering, validation, rejects with fixes) and Client (optimistic
view, replay under remote batches, author-side repair of derived data)
as pure state machines; binary (version byte + postcard, JSON values) and
JSON message forms, fuzzed decoders.
- Engine: normalize as the recompute hook, collab.diff.
- Tests: round trips over random real commands, an N-client convergence
fuzz test over delayed in-order links, junk batches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M9: fmt after merge
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Compare changes: a ready-for-dev frame or section keeps a snapshot of itself from just before
its first change (Document::dev_snapshots, saved only while changed; dropped on resolve, re-mark,
other status or delete). `dev.compare {id?, show?}` diffs it layer by layer: added/removed
layers, and property changes formatted like Inspect (`width 120 → 136`, `fill #FF0000 →
#E03030`, text, parent, order, component, auto layout, typography, effects). The compare view
shows before / now side by side or overlaid with a slider, changed layers outlined, the list of
changes and Resolve change.
- Focus view: `dev.focus {id? | direction}` / `dev.unfocus`: one frame drawn and hit alone
(render Options::solo), a bar with name, status, Compare changes, previous / next ready frame and
exit; Escape leaves.
- Annotation categories: defaults plus the file's own with colours (`annotation.categories`,
`addCategory`, `editCategory`, `removeCategory`), `category` on annotations, coloured callouts,
a category filter and editor in the Inspect panel; stored backwards-compatibly.
- Shared widgets::icon_button / canvas_banner / dropdown_lead; has_status moved to the engine.
- Tests: devcompare_tests, devfocus_tests, annotation_categories_tests, doc handoff_tests, render
solo_tests, UI dev_mode_tests.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Interaction editor: actions (top level and inside conditional blocks) reorder by dragging
their row's grip (list_drag, now also for lists shown in model order), one proto.action.move
per drop; the open action stays open where it lands; Escape cancels a row drag without
deselecting or closing what holds the list. The ... menu keeps Move up / Move down.
- Prototype expressions: `accent[Dark]` reads a variable's value in one mode of its collection
(Expr::InMode) and `mode(Theme)` is the name of the mode a collection is in where the
interaction runs (Expr::Mode); parsed, type-checked, displayed, stored by id (names accepted in
JSON), evaluated with the layer's modes. REST import maps VAR_MODE_LOOKUP over a variable and
one of its modes.
- Overlays opened through commands close on a click outside unless told not to, as in the editor.
- Collection::find_mode / current_mode replace repeated lookups.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M3: components at scale; Alt-drag to swap instances
- Synthetic design system (engine `synthetic_ds`): ~300 components (icons; button, input,
card, nav and badge sets of size x state x type x theme variants), boolean/text/instance
swap/slot properties, instances nested four deep, text and paint styles, light/dark
variables bound across it, and 2,000 instances with overrides at every level.
- Propagation: value, size and added/removed-layer edits of mains reach their copies
directly; other edits rebuild each affected instance once, inner mains first; rebuilds keep
unchanged layers shared; bound variables no longer touch unchanged layers; auto layout
re-flows only where sizes or places changed.
- Fixes: values from variables (theme switches, bound radii) are no longer recorded as
overrides; a detached variable on an instance layer is an override that survives main
edits; exposed nested instances stay exposed; swapped nested instances keep their layer
names and the ids/overrides of layers their own main adds; renamed nested instances keep
their name when detached out.
- Instance swap properties have preferred values. `instance.swapAt` / `library.swapAt` and
Alt-drop from the Assets panel onto an instance swap it (highlighted while dragging).
- Instances pasted into other files follow their mains (library copies shared, published
components used from their library, other mains left behind as a missing main).
- Assets panel lays out only visible tiles and renders thumbnails lazily with a cache
invalidated per changed component; instance panel lists components once per revision.
- `figcraft-cli perf --instances`, UI frame bench and tests in components_scale_tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M3: the swap perf case drops on a glyph the hit test reaches
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Merge origin/main into feat/components-scale; weighted depth 79%
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
PDF export gains print options, saved on PDF export settings and taken
by file.export, file.exportLayers, file.exportFramesPdf, export.add /
export.update, figcraft-cli export and the MCP export tool:
- a bleed (points or a length like 3mm / 0.125in, up to 2 in) that grows
each page and shows what lies past the frame: its fills reach out to
the bleed edge and its children are clipped there instead; a print
page of one frame is trimmed to the frame's box;
- crop and bleed marks: 0.25 pt hairlines outside the bleed in
registration colour;
- MediaBox / BleedBox / TrimBox;
- CMYK colour: fills, strokes, text, gradient stops, images and
rasterised effects converted from sRGB with the naive, deterministic
K = 1 - max(R, G, B) formula; DeviceCMYK without an output intent (no
CMYK ICC profile can ship in the repository), soft masks stay RGB.
The Design panel shows a PDF row's print settings as a summary line that
opens them; the Export dialog has print options for its PDF preset.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Inner shadows paint over the fills and under the children and strokes, as documented (canvas,
PNG, PDF and SVG alike; text fills every run before the inner shadow and the strokes).
- Layer and background blur gain a progressive type: the radius ramps linearly from a start radius
at a start point to the end radius at an end point (unit-box points, like gradient handles).
Rendered by blending a few geometric blur levels, each blurred only around the pixels that use
it; bands and partial renders match one piece. Design panel type menu and Start/End fields,
on-canvas handles while the settings are open, effect.add/effect.set params, startRadius
variable bindings, scale tool, REST import (blurType, startRadius, startOffset, endOffset),
Inspect row; CSS leaves progressive blurs out.
- SVG export embeds renders for what filters can't match: noise grains over the vector layer
(crisp, blended), texture and progressive layer blur whole, background blur and glass from what
lies under the layer among the exported layers. PDF and SVG share the renderer's helpers.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Expressions as text: Expr::parse (variables by name, literals, and/or/not, comparisons,
arithmetic, text joins) with plain-English errors, type checks for conditions and set variable
values; display reads back as the same expression.
- New commands proto.action.add/set/remove/move and proto.conditional.addBlock/setCondition/
removeBlock edit single actions by path, inside conditionals too; `expression` text accepted by
these and proto.interaction.add/set.
- Interaction editor: an action list (open, move, remove, add), Add action > Conditional, if /
else if / else blocks with a condition builder (variable picker, operator, value or variable) or
an expression field with inline errors, nested actions, set variable expressions.
- Presenter: hotspot hints toggle (Options menu, proto.presentOptions {hotspotHints}), hotspots from
the engine (proto_run::hotspots) and in ui.inspect; an Inspect panel showing the hovered layer's
properties ({inspect}).
- Fields keep the keyboard on the click that opens them, and the Enter that commits a field no
longer reaches the shortcuts.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M2: auto layout keyboard reordering, nested auto layout fixes, section hide contents and dev status
- Arrow keys move auto layout children one place: along the flow (past hidden and
absolute siblings), between wrapped rows, to the neighbouring grid cell, and into
the neighbouring nested auto layout frame; no undo step when nothing moves.
- Sections: section.toggleContents (hide contents), object.wrapInSection, frames in
sections are top-level frames (labels, flows, navigation, PDF export), navigating
to a section shows its frame shown last.
- Ready for dev turns "Changed" when contents are edited; dev.resolveChange with a reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M2: README and ROADMAP for auto layout arrow keys and sections
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M7: roadmap refresh after #68–#77
Parity table rows for canvas, selection and transform, layers, effects,
text, prototyping and comments now reflect the merged work; weighted
feature depth ~76%; README command count and hand-off features.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M2: the dev change reason resolves only on Enter or Resolve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Right-to-left and mixed-direction names in the panels: layers, pages,
Assets, tab titles, the file header and canvas frame titles show in
visual order (Unicode bidi, joined Arabic letters, mirrored brackets),
elided at their end (the left end of a right-to-left name). egui shapes
each font run itself, so shown names are laid out a cluster at a time.
Rename fields keep egui's editing and draw the shown text over it: the
caret, selection, clicks, drags and arrow keys follow what's on screen.
System fonts are added for scripts the built-in UI fonts lack.
The Typography section's text style browser: list and grid views with
each style in its own font, search, folders, this file's and enabled
libraries' styles, apply, detach, edit the typography, create from the
selected chars, hover to preview on the canvas, and "Mixed" when the
chars use several styles. Text styles now link chars (style_id on text
styles), so a range can take a style; editing what a style sets
unlinks the chars edited; files from before link on open.
Live text previews (text.preview / text.endPreview): a hovered text
style, font style or named instance and a dragged axis slider show on
the canvas without an undo step; release commits one step, Escape
cancels. ui.input sends raw window input over the control channel.
Visual QA: list markers keep the paragraph's font, renames start with
the name selected and centred, Max lines shows while truncating.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Background blur sees the whole backdrop under the layer: the renderer keeps the stack of
isolated surfaces it draws into (clipping frames, rounded clips, faded groups, masks) and
flattens it for the layer's area, reading past the layer's own box. A blur inside a clipping
frame now shows the frame's fill instead of the sharp layers below, on the canvas and in PNG
exports. The PDF export draws background blur and glass through the same code from a render of
what lies under the node (`backdrop::render_beneath`, which the PDF's backdrop now shares), and
its images match the PNG's pixels.
- Shadow spread offsets the outline: the shape filled and stroked twice the spread wide with
mitred joins (grow) or cut away (shrink), the stroked bands cached per outline. Ellipses stay
ellipses, stars keep sharp points, text keeps its letterforms, rounded corners grow their
radius. Inner shadows shrink the outline the same way. Canvas, PNG and PDF share the shadow
code; SVG writes spread shadows as the same geometry and now exports inner shadows.
- Glass effect (light angle and intensity, refraction, depth, dispersion, frost, splay): the
frosted backdrop bent towards the inside within `depth` of the edge, colour fringes, light on
the rim, from an exact distance transform with smoothed normals.
- Noise: mono, duo and multi colour modes, grain size, density, opacity and blend mode; grains
live in the layer's coordinates (stable when panning and zooming). Texture is now drawn
(pixels scattered by the radius, grain size, clip to shape).
- Design panel rows for noise mode/colours/opacity, texture clip to shape and every glass value;
`effect.add` takes `glass`; REST import of NOISE, TEXTURE and GLASS; Inspect rows and CSS;
the scale tool scales grain sizes, texture radius, glass depth and frost.
- Tests in new modules: render backdrop/spread/grain tests, PDF backdrop tests, SVG, doc,
engine and REST effect tests.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
PDF export
- Vector masks clip to the mask's outline, luminance masks are luminosity
soft masks (alpha masks as before).
- Background blur: the backdrop the page draws under the layer is rendered,
blurred and cut to its shape, under the layer's vector content.
- Text hyperlinks become clickable link annotations (one per line and link).
- Frames-to-PDF shares one path (`frames_pdf`): sRGB conversion for Display
P3 files, hidden frames left out, the file name as the PDF title.
- `figcraft-cli export -o x.pdf` and `convert x.figcraft x.pdf` write the
page's frames one PDF page each.
- Tests: mask types, backdrops, links, image deduplication, page sizes in
points, hostile inputs; CLI end to end. Checked by rendering the PDFs back
to PNG and diffing against the PNG export.
Prototyping
- Model: conditional actions (if / else if / else blocks), set variable mode,
and expressions (literals, variable references, + - * /, comparisons,
and/or/not, negate) for set-variable values and conditions; walk helpers
for nested actions (remap on paste, colours, destination checks, library
copies and pruning, canvas connections).
- REST import maps CONDITIONAL, SET_VARIABLE_MODE and SET_VARIABLE with
variable references and EXPRESSION values; unsupported functions (mode
lookups) skip the action with a warning.
- The presenter runs them in order (`figcraft_engine::proto_run`); the
Prototype panel summarises conditionals, edits set-variable-mode, and
`ui.set {protoEditor}` opens an interaction's editor.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A stroke can carry a width profile: widths at positions along the path
(each subpath by length), interpolated smoothly (monotone cubic).
- doc: WidthProfile / WidthPoint / WidthPreset (uniform, wedge, taper both
ends, eye, rounded, pinch) on StrokeProps, serde-defaulted so older files
load; paint reach and hit testing follow the widest point.
- pathops: path measuring by length and the variable outline (offset along
the normals, round/miter/bevel joins, caps, dashes keep their width,
Inside/Outside clip as before; bounded samples and dashes, uniform
fallback). Canvas, PNG, SVG (filled outline), PDF and outline stroke use it.
- engine: stroke.widthProfile {preset | points}, node.set widthProfile,
inspect output; the Variable width tool (Shift+W) in vector edit mode:
drag the path to add a width point, slide points, drag their handles,
Delete removes the selected one; vector.edit.widthPoint add/set/remove.
Every gesture is one undo step.
- UI: width profile dropdown with previews drawn in code and a flip button
in the stroke settings; the tool in the edit toolbar (new icon drawn in
code); width handles and a hover preview on the canvas; Position/Width
fields for the selected width point.
- Tests: profile maths, outlines, render regressions, tool gestures,
commands, exports and junk sweeps. ROADMAP, README, docs updated.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M3: colour profiles: sRGB or Display P3 per file, convert or keep values, tagged exports
- color: ColorProfile (srgb, displayP3) with conversions derived from the primaries (shared D65
white and sRGB curve; out-of-gamut channels clip), table-driven pixel conversion, a generated
ICC v4 matrix/TRC profile and PNG cICP code points.
- doc: Document.color_profile (serde default sRGB, written only when set); every colour value
(paints, text runs, effects, grids, page and prototype backgrounds, overlay backdrops, styles,
colour variables, document colours) can be mapped; set_color_profile converts or reinterprets.
- engine: file.colorProfile {profile?, convert?} (File > Color profile...; without a profile it
opens the dialog); document.inspect reports colorProfile.
- render: images are taken as sRGB and managed into the file's space; encode_export tags PNG
(sRGB chunk, or iCCP + cICP for Display P3) and embeds the ICC profile in Display P3 JPG/WebP;
SVG and PDF export Display P3 files converted to sRGB. The CLI exports the same way.
- ui: Color profile dialog (keep appearance / keep values) and a Color profile row on the page
panel; the canvas, presenter, thumbnails, swatches and colour picker show a Display P3 file's
colours converted to the screen's sRGB, and Copy as PNG converts too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M3: image adjustment presets: built-in, saved in the file, reset
- color: ImageFilters::PRESETS (Vivid, Muted, Warm, Cool, Black & white, Fade, Reset), lookup by
id or label, and sanitized values.
- doc: Document.image_presets (name + adjustments; written only when there are some).
- engine: image.adjust {ids?, target?, index?, preset?, filters?} sets the adjustments of image
paints from a preset (built-in or saved) with values on top, one undo step; image.savePreset,
image.deletePreset and image.presets.
- ui: the colour picker's image section gets a presets menu named after the preset in effect
("Custom" otherwise), saved presets with delete, "Save as preset...", a Reset button, and
aligned adjustment sliders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M3: style picker: search, folders, list or swatch grid, edit, create, detach
The Fill, Stroke, Effects and Layout grid sections' Styles button opens a popover laid out like
the variable picker (crates/ui-egui/src/style_picker.rs):
- search over style names; styles grouped by the folders of their `/`-separated names, which
collapse (searching opens them); colour styles as a list or a grid of swatches;
- click applies, a check marks the applied style; the row's edit button (or a right-click) edits
the name, description and values: colour style paints open the colour picker on the style,
effect and grid styles update from the selection; delete;
- `+` creates a style from the selection's current values and opens it for naming; detach;
- colour slots still list colour variables to bind;
- the applied style chip opens the picker; new icons Adjust, ViewList, ViewGrid (drawn in code);
- control channel: ui.set {stylePicker, stylePickerEdit, stylePickerView}.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M5: scrolling inside device frames and a prototype preview pane
On a device, the presented top-level frame is sized to the device's screen:
what doesn't fit is clipped, or scrolls (wheel and drag) when its overflow
allows it. Fixed layers stay on screen, pinned to the edges their
constraints name; "Scroll to" moves every scrolling frame around the layer;
navigating starts at the top unless the new "Preserve scroll position"
option keeps it.
The preview pane is a resizable window over the canvas running the same
player (present.rs now shares layout, drawing and input between the
full-window presenter and the pane). It follows edits live, keeps the
current screen while it exists, shows a newly selected top-level frame, and
takes the keys its prototype uses only while hovered. Opened from the play
menu, the Prototype tab (flows, settings, frame) and `proto.preview
{start?}` / `proto.closePreview`; the control channel gets `ui.set
{preview, presentScroll}` and the player's state in `ui.inspect`.
Alt+Cmd+Enter now presents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M5: reconcile with main: one device list, REST navigate keeps preserveScrollPosition
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Publish (`library.publish {description?, include?, exclude?}`, Libraries > Publish library…):
the file's components, component sets and styles (by default all but names starting with `.` or
`_`, or what the last publish offered) and every component and style they use go into a snapshot
with a manifest (library id, version, per-asset version stamps). An asset keeps the version it
last changed in; publishing without changes is refused.
- .figcraft: `library/manifest.json`, `library/document.json` (the snapshot) and
`library/images/<sha256>` for images only the library still uses. Older files and readers are
unaffected (extra members); a damaged library is skipped and reported when the author's file
opens. Files using a library read only these members (size-limited), never unpublished edits.
- Version history: the library entries are written and read alongside the versions (a library
survives saving with versions and reopening); restoring a version keeps what the file published.
- Enable: `library.add {path}` / `library.remove {id}` / `library.list {assets?}`; the document
keeps its enabled libraries (id, name, path, last seen version) in its data. The session caches
each library file and reads it again when it changes on disk; in the browser these commands
return a clear error (no file system).
- Use: `library.place {library, component, x?, y?}` / `library.import` copy the component (with
the components and styles it uses) into a hidden library store (a page-like root outside the
page list) as read-only main components and place an instance; instances behave like any other
(overrides, properties, variants, swap, reset, detach). `library.applyStyle` copies a style in as
a linked remote style. Editing the copies or library styles is refused; Go to main component
names the library. Importing a file's pages brings its library copies along (shared with copies
the document already has).
- Updates: `library.updates` and `library.acceptUpdates {ids?}` re-import changed copies in place
(layer ids kept, so instance overrides survive, also when layers are added); unused copies are
dropped when a library is removed or updated.
- Assets panel: each enabled library's components (thumbnails, search, click or drag to place,
shared with the local tile code) and styles (click to apply, paint swatches), collapsible per
library; "Library updates available" banner with Update; a libraries view (book button,
Libraries menu) to publish this file (choose assets, description) and add or remove library
files. Local styles in the panels list only this file's styles.
- Tests: manifest round trip and versions, add/place/update keeping overrides (incl. a structural
update), variants/swap/undo, library styles and importing pages, missing/corrupt/truncated/
oversized/never-published files; format tests for damaged and oversized members.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Large documents stay interactive: the canvas re-renders only what a pan uncovers or an edit
touches, the layers panel lays out only the rows in view, and per-frame work no longer walks the
whole page.
- Benchmark: `cargo xtask bench [SIZES]` builds synthetic pages (`figcraft_engine::synthetic`:
screens with an auto layout header, a card group, button instances and shapes/text) at
1k/10k/50k layers and prints engine/render timings (`figcraft-cli perf --layers 1000,10000`) and
headless whole-UI frame timings (an ignored ui-egui test).
- Retained canvas rendering (`figcraft_render::Retained`, used by the render worker): views snap
to whole device pixels, so a pan shifts the previous image in place and renders only the
uncovered strips; an edit renders only where changed layers were and are
(`Document::changed_ids` diffs the two versions skipping shared structure; ancestors that paint
from their children's pixels - booleans, effects, masks - count whole; background blur reach
and noise are allowed for). Zoom, page, options, font or page-level changes, or large changes,
render the whole view as before. `ui.inspect` reports `canvas.renderWork`.
- The texture image is converted on the render thread, not the UI thread.
- Layers panel: only visible rows are laid out (stable ids while scrolling); rows are cached per
document version, page, expanded set and filter.
- Frame labels and layout grids of off-screen top-level frames are skipped; the Prototype tab's
connection sources are cached per document version.
- Text: the layout cache keys by a cheap fingerprint confirmed by `TextData` equality (no Debug
formatting per lookup, 32k entries) and hands out shared layouts; a layout generation marks
renders stale when fonts arrive. Overflowing text is culled by its glyphs, so it no longer
vanishes while its box is off screen.
Before -> after (release, Windows, 1440x900 view, ms; 10k / 50k layers):
- move one layer, re-render @100%: 7.65 / 6.49 -> 0.18 / 0.81
- move one layer, re-render zoomed out: 11.95 / 24.10 -> 0.16 / 0.77
- pan 40 px @100%: 7.53 / 6.82 -> 0.69 / 0.81
- pan 40 px zoomed out: 12.07 / 24.30 -> 1.62 / 4.17
- full render @100% / zoomed to fit: 7.78 / 44.22 -> 6.56 / 38.83 (10k @100%, 50k fit)
- UI frame, every screen expanded in layers: 6.16 / 39.07 -> 0.24 / 0.57
- UI frame, scrolling that panel: 6.11 / 40.18 -> 0.43 / 0.40
- UI frame, layers filtered by name: 1.03 / 6.92 -> 0.17 / 0.36
- UI frame, Prototype tab: 0.89 / 6.45 -> 0.18 / 0.80
- UI frame, idle: 0.31 / 1.43 -> 0.11 / 0.39
Unchanged and within budget: single-layer edits through the engine ~0.01 ms, normalize after a
one-node edit < 0.01 ms, hit test 26 / 93 us. Left: save/load at 50k (~0.7 s each), zoomed-out
renders at 50k (~40 ms).
Tests: retained renders match full renders after pans, moves, recolours, hide/remove/add, undo,
masks, overflowing text, edits under a background blur and an inner-shadow/noise layer, a drop-
shadowed group, and a blur panned in from the view's edge; zoom/page/options/page background
render full; junk views don't panic. Layer-row and prototype-source caches follow edits, undo,
page switches, expansion and the filter. `changed_ids`, the text cache, and the perf CLI.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Edit-mode toolbar (Move V, Pen P, Bend hold Cmd, Paint bucket Shift+B, Lasso Q, Cut X, Done)
replaces the tools while a vector is edited.
- Pen in edit mode continues open ends, branches from any point (vector networks), adds points on
segments and closes paths into fill regions; dragging pulls out mirrored handles.
- Paint bucket fills or unfills any closed area: faces of the network (half-edge walk, nested
pieces become holes), with a hatched preview of the area under the pointer.
- Bend tool / Cmd: bend segments, pull handles out of a point, click a smooth point to sharpen it.
- Lasso and marquee point selection, segment selection (shift adds), cut at a segment or a point.
- Per-point handle mirroring (none / angle / angle and length, inferred for existing files),
Alt-drag breaks it; smooth/sharp points; join and merge selected points (Cmd+J, Shift+Cmd+J).
- Delete opens the path, Shift+Delete heals it; arrows nudge points; Cmd+A selects all points.
- Design panel shows the selected points' position, corner radius and mirroring.
- Every gesture is one undo step; edit mode ends when its layer is undone away.
- Paths that end on their start without a ClosePath (ellipse outlines) stay closed and filled.
- New commands (vector.edit.tool/pen/paint/cut/lasso/mirroring/smooth/position/nudge/connect/...)
for the CLI, control channel and MCP; docs updated.
- Clippy: simplify a few boolean expressions flagged by the current toolchain.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
