The .fig export now writes a numbered list's start on each of its lines,
so a reader that takes it per line or per list counts the same. Bullets
no longer keep a start. The field is named start_offset (it holds the
offset: 1 shows "2."). get_node reports listStartOffsets. The parity doc
lists what's still not read from .fig lists.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Figma stores where a numbered list starts counting on each text line
(listStartOffset; a list shown as "2." has offset 1). The import dropped
it, so every list counted from 1.
A paragraph's list settings now carry a start number (written only when
set, so older files open and save unchanged). Numbering counts on from
it where a list starts; items that go on counting ignore it. The .fig
import reads it, the .fig export writes it on a list's first line, and
plain paragraphs drop it. Toggling a list off ignores differing starts.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
StyleRun start/end are usize taken straight from a .figcraft document.json
(nothing clamps them on load; only the REST and SVG importers normalize),
so TextData::replace_range's p - removed + inserted panics in a debug or
test build and wraps to zero in release, where normalize then drops the
run and the layer silently loses its formatting.
Shift the runs with saturating arithmetic; normalize drops whatever is
left. Regression test: text_runs_past_the_text_never_overflow — panics
at crates/doc/src/text.rs:605 on main, passes with the clamp.
The tail of the text area, from the public documentation of the target app's text settings, with a table-driven behaviour suite (each case derived in one line; "silent" cases pin today's behaviour).
- **Lists per paragraph** (`TextData::paragraphs`, one `ParaList {list, indent}` per paragraph; empty when the layer has one list style at level 0, so old files load and save unchanged). The list buttons, Shift+Cmd+8 / Shift+Cmd+7, `text.listStyle` and Type settings act on the paragraphs the selection touches while editing (the whole layer otherwise). The per-paragraph list follows edits: a new paragraph copies the one it split from, joined paragraphs keep the first one's.
- **Nesting** up to 8 levels: Tab nests a list item, Shift+Tab moves it out; Enter on an empty item and Backspace at an item's start move it a level out, then out of the list. Typing `- `, `* ` or `1. ` at the start of a plain paragraph starts a list. Numbers count per level (1. a. i., then round again), bullets go • ◦ ▪; a plain paragraph, a shallower item or the other list kind starts the count again. Each level indents by one marker gutter; a nested bullet a font lacks comes from a fallback font.
- **List spacing** (space between two items of a list, in place of paragraph spacing), **hanging lists** (the outer gutter outside the box, item text lined up with plain paragraphs) and **hanging punctuation** (opening quotes and brackets outside the start edge of left-aligned and justified lines, closing punctuation outside the end edge of right-aligned and justified ones; hung punctuation takes no room when lines wrap).
- **Decoration look** per character (`TextStyle::decoration_look`, boxed, None by default): style (solid, dotted, wavy), thickness and underline offset (auto, px or % of the font size), skip ink (underlines break around descenders) and colour (its own style index in the layout, so canvas, PNG and PDF paint it without renderer changes). Decorations are drawn from `Decoration::path()` (bar, dots or wave) on the canvas, in PNG, PDF and outlined SVG.
- `node.set` keys: `listStyle` and `indentation` (range-aware with start/end), `listSpacing`, `hangingPunctuation`, `hangingList`, `textDecorationStyle`, `textDecorationThickness`, `textDecorationOffset`, `textDecorationSkipInk`, `textDecorationColor`; documented in `KEYS` and docs/mcp.md. `text.edit.key` documents Tab.
- Inspect: `listStyle`, or `lineTypes` and `lineIndentations` per paragraph; `listSpacing`, `hangingPunctuation`, `hangingList`, the decoration keys. CSS: `text-decoration-style`, `-thickness`, `-color`, `text-underline-offset`, `text-decoration-skip-ink: none` (browsers skip ink by default). Dev Mode rows: decoration style, list spacing.
- REST import: `lineTypes` with `lineIndentations` per paragraph (they collapsed to one list style for the layer before), `listSpacing`, `hangingPunctuation`, `hangingList`, the decoration style, thickness, offset, skip ink and colour; instance override names for them.
- Type settings ▸ Basics: decoration style, thickness and offset fields (with Auto), Skip ink, decoration colour; List spacing; Hanging punctuation and Hanging list checkboxes; the list control acts on the edited paragraphs. New strings in en/es.
- Components carry the new text fields in the characters and text-style override groups; scaling scales list spacing and px decoration lengths.
- `TextData::path` is boxed (`Option<Box<TextPath>>`) to keep `NodeKind` under clippy's enum size limit after the new fields.
## What
**A text behaviour suite written from the public documentation, and fixes for every divergence it found.** Each documented rule (Auto / % / px line height and how the leading is split, letter spacing in % and px, paragraph spacing and indent, auto width / auto height / fixed / truncate with max lines, vertical trim, decorations from the font's metrics) is a table-driven case with the numbers the rule implies and a one-line derivation, read from the face actually used so it holds on any machine with a font. CJK line breaking follows UAX #14 and the CJK line-start / line-end rules; caret steps follow UAX #29 grapheme clusters. Where the documentation is silent the case says so and pins today's behaviour.
**Fixes (6 of the 13 text cases fail on the old layout; the break and caret rules are new functions)**
- **CJK line breaking**: lines break between ideographs, kana and Hangul and before or after a Latin word next to them (before: no break before an ideograph that follows Latin, none after `。`, full-width forms, CJK punctuation or Extension B ideographs), never inside a Latin word, with kinsoku: closing brackets and quotes, `、。，．！？`, small kana, the prolonged sound mark and iteration marks never start a line (the character before moves down with them), opening brackets never end one. The ideographic space hangs at the line's end like a space. One small break-class table in `crates/text/src/breaks.rs`, no new crate.
- **Fallback fonts no longer move the baseline**: a style's ascent, descent, line height and cap height come from its own font, not the fallback face that drew some of its characters, so a line with CJK or emoji keeps the height and baseline of a Latin line (with a fixed line height the mixed line's baseline used to shift by the CJK face's taller metrics; with Auto the line grew). Decorations likewise use the style's font and size, so an underline runs at one height and weight through mixed scripts (and isn't thinned by synthesised small caps).
- **Paragraph indent applies to left-aligned text only** (documented); right-to-left paragraphs keep it when right-aligned (their start). The Type settings field is disabled with a hint otherwise.
- **Carets by grapheme cluster**: Left / Right, Delete and Backspace step over a whole emoji ZWJ sequence, flag, skin-tone sequence or letter with combining marks (they moved one code point at a time, leaving the caret inside an emoji and deleting half of it). A cluster is also shaped with one font, so a joiner or variation selector no longer splits an emoji sequence across faces.
- **Words by script**: double-click and word moves (Alt on macOS, Ctrl on Windows and Linux) take one script's run in text without spaces (`日本語` | `の` | `テキスト`), Hangul words end at spaces, and a Latin word keeps its combining marks (before: a whole CJK sentence was one word, and `cafe` + combining acute split at the accent).
**Missing documented setting, added**
- **Vertical trim** (cap height to baseline): `leadingTrim: none | capHeight` (`CAP_HEIGHT` from REST JSON) through `node.set`, a Standard / cap-height segmented control in Type settings, `inspect_document` and Dev Mode properties, CSS `text-box: trim-both cap alphabetic` in generated code. The box runs from the first line's cap height to the last baseline (auto height shrinks, auto layout parents follow); truncation counts the trimmed bottom; exports reach past the box so descenders below the last baseline aren't clipped. Canvas, PNG, SVG and PDF all draw from the same layout.
New strings go through `tr(...)` with `en.toml` / `es.toml` entries; the new segmented control reuses the Type settings one (accessible toggle names). Each edit is one undo step. `unicode-segmentation` (already in `Cargo.lock` through egui and winit) became a direct dependency of `figcraft-text`.
## Verified
- **Desktop app** over the control channel (own target dir, separate `APPDATA`, stopped by PID): a 200 px auto-height box of Japanese wraps with no line starting with `、。」` and `「` never ending a line (`…テスト` / `を折り返す、テスト` / `です。「括弧」は行` / `末に来ません。漢` / `字とかなとカタカ` / `ナ。`, the last `ナ` carried down with `。`); a Latin / CJK / Latin paragraph at 36 px line height is 108 px with evenly spaced baselines; the same text with vertical trim is 89.45 px (cap height 17.45 + 2 × 36), its box running from the cap height to the last baseline, and the Type settings control turns it off (108 px) and undo brings it back in one step; one Right arrow from after `a` in `a👨👩👧b` lands after the whole family emoji and Shift+Right then selects `b`; a double click selects the katakana run テキスト.
- **MCP**: `figcraft-cli mcp` (headless) built the same three texts; `inspect_document` reports 108 px for the 36 px paragraph and 89.42 px with `leadingTrim: capHeight` for the trimmed one (cap height of the headless font), the PNG export wraps the Japanese by the same rules and keeps the trimmed text's descenders, and `inspect.code` emits `text-box: trim-both cap alphabetic`.
- **Web**: `cargo xtask wasm` passes (part of the gate).
- **Performance**: text layout of a 2,250-char Latin and a 2,000-char Japanese paragraph wrapped at 300 px (release, median of 7 × 30 runs) before and after on the same machine: Latin 0.70 → 0.42–0.50 ms, Japanese 0.46 → 0.37–0.47 ms (within noise or faster: line metrics are now computed once per style change instead of per glyph). All-ASCII text skips grapheme segmentation.
- `cargo +1.99.0 xtask ci` passes (fmt, clippy, tests, layers, assets, wasm), after merging #131 and #132.
## Tests
- `text` (`behaviour_tests`, 13 tests): line height Auto / % / px; leading split above and below every line (positive and negative); letter spacing % / px / negative; paragraph spacing and indent by alignment; resizing and truncation with max lines; vertical trim (heights, first baseline, glyph spacing kept, truncation); decorations from the font's metrics through mixed scripts; fallback fonts keep line height and baseline (Auto, px, %); 22 break-opportunity cases; CJK wrapping with kinsoku, Latin words in CJK and Korean; the ideographic space hanging; grapheme steps over ZWJ families, flags, combining marks, skin tones and emoji presentation; one face per cluster. Font-dependent cases skip on a machine without fonts.
- `engine` (`text_behaviour_tests`, 5): arrows, Shift+arrows, Delete and Backspace by cluster; double-click and word moves by script (and through `keymap::text_motion` for Ctrl and Alt); IME composition with CJK wrapping and growing the box before commit; vertical trim through `node.set` (box size, PNG ink at the top, export bounds below the box, SVG and PDF, CSS, inspect, undo, junk refused, REST spelling); paragraph indent only on left-aligned text.
- `format` REST import test covers `leadingTrim: CAP_HEIGHT`.
## Not in this PR
- Documented but not modelled yet: list spacing, hanging quotes and hanging lists, underline style / thickness / offset / skip ink.
- Documentation silent, behaviour pinned: Korean wraps by syllable (no word mode); Han compounds next to each other are one word (no dictionary segmentation); letter spacing is added after the last character too; a fallback font's taller glyphs may overflow the line rather than grow it.
- `.fig` import doesn't read vertical trim yet (the field wasn't checked against real files).
- Spell check (on hold, #113).
- Progress docs: target-app-parity area 10 85%/64% → 87%/68%, 7–13 h → 5–10 h with the suite listed under text editing depth; feature breadth and ready for real work unchanged at this rounding; full parity ~323–621 h → ~321–618 h (target-app-parity, ROADMAP); ui-parity text row.
Text layers can follow a path (start offset, flip, alignment; edited in place; canvas, PNG, SVG, PDF; SVG textPath imports as real text on a path). A new pattern paint tiles a source layer in grid or hex rows with scale, spacing and alignment, live as the source changes (SVG pattern, PDF vector tiling pattern).
Right-to-left and mixed-direction names in the panels: layers, pages,
Assets, tab titles, the file header and canvas frame titles show in
visual order (Unicode bidi, joined Arabic letters, mirrored brackets),
elided at their end (the left end of a right-to-left name). egui shapes
each font run itself, so shown names are laid out a cluster at a time.
Rename fields keep egui's editing and draw the shown text over it: the
caret, selection, clicks, drags and arrow keys follow what's on screen.
System fonts are added for scripts the built-in UI fonts lack.
The Typography section's text style browser: list and grid views with
each style in its own font, search, folders, this file's and enabled
libraries' styles, apply, detach, edit the typography, create from the
selected chars, hover to preview on the canvas, and "Mixed" when the
chars use several styles. Text styles now link chars (style_id on text
styles), so a range can take a style; editing what a style sets
unlinks the chars edited; files from before link on open.
Live text previews (text.preview / text.endPreview): a hovered text
style, font style or named instance and a dragged axis slider show on
the canvas without an undo step; release commits one step, Escape
cancels. ui.input sends raw window input over the control channel.
Visual QA: list markers keep the paragraph's font, renames start with
the name selected and centred, Max lines shows while truncating.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Canvas previews zoomed out to 50% or less draw levels of detail
(crates/render/src/lod.rs): subtrees under 2 device px are splatted as
their averaged paint colours (box filter, no paths or effects), text
under 4 px is greeked into bars, small solid rectangles are splatted and
rectangular clip layers are composited without the blend pipeline.
Image paints and masks keep the exact path. Exports, thumbnails and
every other render stay exact (Options::lod is off by default); render
bands are assembled with a row copy instead of a pixmap draw.
.figcraft documents are serialized straight into the compressor and
parsed straight from the text (a header pass reads version and image
index without building a value tree); layer and text fields at their
default values are left out (63 -> 22 MB of JSON at 50k layers, older
files still load); JSON members use deflate level 3.
At 50k layers: zoomed-to-fit render ~58 -> ~8 ms, save ~1.0 s -> ~0.09 s,
load ~0.86 s -> ~0.16 s.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Inline IME composition: egui Preedit events become a composition held in the text edit
session (`TextEdit.preedit`), shown inline at the caret with an underline and the IME cursor,
reflowing the text; the document only gets the committed text (`text.edit.insert`). Composing
over a selection replaces it; moving the caret or ending the edit drops an uncommitted
composition. The IME candidate window follows the cursor inside the composition.
New command `text.edit.preedit {text, cursor?}`; `text.edit.selection` reports it.
- Variable fonts: faces read their fvar axes (tag, name, range, default, hidden) and named
instances. Named instances are offered as styles and resolve in `find`; a style name with no
instance implies weight/italic/slant on the axes and optical size follows the font size.
Per-run custom axis values (`TextStyle.variations`, serde default, omitted when empty) are applied
in HarfRust shaping (ShaperInstance) and skrifa outlines/advances (cached per coordinates).
PDF export outlines non-default instances instead of embedding the default one.
- Commands/props: `fontVariations` / `variationSettings` props (whole layer or start..end),
`text.setVariations {variations, replace?}` (merges; edited range while editing),
`text.fonts {family, style?, axes: true}`; `node.get` and copy/paste properties carry the axes.
Picking a named style (Bold/Italic toggles, weight steps, fontStyle/fontWeight) drops custom
wght/ital/slnt values and keeps the others.
- Type settings ▸ Variable tab for variable fonts: a slider (default tick, double-click to reset)
and a field per visible axis, "Mixed" across differing styles, live drag as one undo step,
"Reset to style". Long style/family names stay on one line with an ellipsis and a tooltip.
- Tests: variable font shaping/outlines/clamping/instances (skipped without a variable font),
serde backward compatibility, preedit lifecycle and undo, variation commands/props/undo/junk;
junk sweeps extended with variation and preedit params.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
