Frames on the page or in a section convert to sections (object.convertToSection) and sections back to frames (object.convertToFrame), in place, one undo step each, from the canvas context menu; nested frames, instances, main components and sections holding sections are refused.
The .fig export now writes a numbered list's start on each of its lines,
so a reader that takes it per line or per list counts the same. Bullets
no longer keep a start. The field is named start_offset (it holds the
offset: 1 shows "2."). get_node reports listStartOffsets. The parity doc
lists what's still not read from .fig lists.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Opening or importing a .fig or REST JSON file, or an SVG that has notes,
from the app (File > Open or Import, a recent file, a drop, a paste, the
system's open event) now shows an Import report window with the
document's name, its page, layer and image counts and the compatibility
notes the importer collected, instead of leaving them only in the command
result. Commands sent over the control channel or MCP never open it.
file.open and file.import return the counts as `summary`; ui.inspect
reports the open report as `importReport`. The fixed notes the importers
emit are translated (German and Spanish) and shown with a capital first
letter; other notes, such as SVG's, show as written. The report goes
away with its document. Escape or Close dismisses it.
Preserve the upstream behaviour and regression tests alongside this feature. Align the control-server connection-limit test with main closing invalid JSON connections: assert EOF instead of shutting down an already closed socket on macOS.
The hub kept the addresses removed from every file it ever had open. The
entry now goes when the file is closed (everyone left) or removed from the
server, so a long-running public server doesn't keep collecting them.
The outer batch passes a command.batch step on as written, so the inner
steps' `$step` references point at the inner batch's steps. The docs say
that `$step` is a reserved key in step params.
Adds Swedish (Svenska) as an interface language: 2165 strings, written from the English source.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds crates/ui-egui/locales/cs.toml with all 2165 entries (ui, commands,
menu), marked "draft — needs native review" and kept out of COMPLETE.
Plurals use one/other only; the other form is worded count-neutral so it
reads correctly for 2-4 as well. Lists cs in the pref.language help text,
adds a cs_CZ.UTF-8 detection test and updates the localization docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Inside command.batch, `{"$step": n}` anywhere in a step's params is
replaced by the `id` in step n's result before the step runs
(`{"$step": n, "field": "..."}` picks another field). A nested tree,
such as a frame with children, now takes one batch and one undo step,
not one round-trip per level with ids copied between calls by hand.
Malformed references (forward or self, negative or fractional index,
missing or non-string field, extra keys) fail the batch with BadParams
naming the step, and the existing group machinery rolls it back. The
params walk is depth-capped. Steps are journalled with resolved params.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Right-click a person's avatar ▸ "Remove <name> from session", or
`collab.removePerson {client}`, when you host the session or own the file
on a server. The hub closes their connection as the end of the session for
them (close 1001: they keep their copy and don't reconnect) and bars their
address from that file while it runs, so the code or link they hold no
longer gets them in; everyone else stays connected.
Protocol addition within version 2: `Admin::RemovePeer {file, client}` on
an open hosting connection with the file's owner token (or the server
key). Older servers say they can't.
Tests: loopback (removed, can't rejoin, others stay), engine (host can,
guest can't, bad ids refused), codec round trip; the collab junk sweep
covers the new command.
page.add gave every added page the interface theme's colour. Figma's
documentation says added pages inherit the current page's background;
the theme only decides a new file's page. Read the active page's colour
before creating the new page, in the command, so the app, CLI, control
channel and MCP agree.
Refs #295
Preferences > Save files automatically (pref.autoSave, off by default;
hidden in the browser, which has no files to save to). With it on, each
open file that has a path is saved 3 s after it changes, never during a
gesture, a live text preview or while a version is shown. A failed save
says why in a toast and tries again a minute later.
Version history checkpoints (version.autosave, every 30 minutes) only ran
for files with unsaved changes, so a file that saves itself would stop
getting them; with auto-save on, edits made since the file was opened
count.
Closes#296
- A copy Alt-dragged off a layer snaps to that layer too: its edges,
centres and equal spacing (Targets::add_box with the originals' box).
Before, the originals were left out of the snap targets, so a copy
couldn't line up with or space evenly from the layer it came from.
- Duplicate (Cmd+D) repeats the last duplicate's page offset while its
copies are what it duplicates: Alt-drag a copy, or Duplicate and move
the copy, then each Cmd+D steps out the next one as far again. The
step is measured when Duplicate runs. It lasts as long as the
selection (undo reuses ids), copies placed by an auto layout set no
step, and explicit dx/dy win.
- measure_tests: an Alt-dragged copy between its original and another
layer now snaps to equal spacing (45/45 instead of 50/40).
Tests: duplicate_spacing_tests (snap to the original, equal spacing,
repeat after moving a copy and after an Alt-drag, only for the last
copies, undo then a new layer, rotated frame, auto layout).
Refs #256
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
`{"type":"linearGradient","stops":["#hex",…]}` was only expanded by the MCP
tools, so `figcraft-cli run` and the control channel's `engine.execute`
refused it ("`fills` must be paints or colours"). The expansion now lives in
the engine (`params::normalize_paint`, used by `paint_of`), so node.set,
node.create props, fill.add/set, strokes and paint styles all take it; MCP
calls the engine's copy instead of its own.
Tests: engine (every paint command, MCP-equal defaults, junk still refused),
control channel `engine.execute`, and `figcraft-cli run` end to end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(dev-mode): Leptos code for a layer tree (#223)
inspect.code takes language: leptos, and the Inspect panel lists it: the
HTML markup inside a #[component] fn's view!, with the stylesheet after it
as for React. Text is Rust string literals (line breaks as <br/>) so the
macro parses it; px or rem like the other web languages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(dev-mode): Leptos components take their properties, instances are calls (#223)
Leptos joins React in component code: a component or set is a #[component]
fn with #[prop] defaults (variant enums with as_str, bool, String, ViewFn
for instance swaps, Option<ViewFn> for slots), layers bound to booleans
show through .then, variants differ by data-* CSS rules, and instances
(also inside layer trees) are calls passing the values they change. Names
are snake_case, Rust keywords get a trailing _. Code Connect takes leptos
too (use <path>::<Name>; view! markup). Markup now takes the language
instead of jsx/leptos flags; React and Leptos share the stylesheet pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Justin John <babyjjbabyjj549@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bflatastic <bombayapirat@gmail.com>
The AppImage ships figcraft-cli in usr/bin, but AppRun only ever launched the
app, so the CLI (and its MCP server) could not be reached without extracting
the image. `FigCraft.AppImage cli mcp` now execs `figcraft-cli mcp`, skipping
desktop integration because the CLI is headless.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Agent Host changes for agents/fix-command-batch-history-restore
* Implement centralized transactional fix for command batch failures - #1
* The batch rollback tests compile, are formatted and expect the tab that was in front
The new module used a private helper of plugins_tests and an unused import; the plugin test
asserted tab 0 was in front, but it opens a second file first, which is the one in front
when the plugin starts and the one the rollback puts back.
---------
Co-authored-by: bflatastic <bombayapirat@gmail.com>
The attached MCP backend no longer re-sends a request when its reply is lost: the app may already have applied it, so the error says the operation may have completed and to inspect the document before retrying; the next call reconnects, and a failed reconnect says the request was not sent. Fixes#194.
Also: a connection the app already closed (it drops ones idle past its socket timeout) is noticed before the next request is written and replaced then, so a pause between calls is not an error.
Co-authored-by: bflatastic <bflatastic@users.noreply.github.com>
MCP and control-channel lines are bounded while they are read (32 MiB; an oversized frame gets an error and the stream closes without being drained). The loopback control listener caps connections at 8, applies 60 s socket read and write timeouts, caps both request queues at 8 and discards requests whose client stopped waiting. Fixes#201.
Ivan Shishkanov