Opening movies in place (#796) skipped the whole-file bytes #827 read the
track matrix from, so the pool and the probe lost the turn for movies on
disk. stream::movie_header reads just the ftyp and moov boxes (bounded,
positional reads) and both in-place paths derive the orientation from it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging the in or out edge of a selected layer's bar now trims every
selected layer by the same delta from its own in/out point, as in After
Effects. layer.timing gains relative inDelta/outDelta params (seconds,
frame-snapped), clamped to the comp start/end and to one frame of layer;
the drag stays one undo step via the merge key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Alt-click on a layer's Video, Audio, Solo or Lock switch sets that layer
apart: the other layers go off (or locked), and the next Alt-click brings
them back. Backed by layer.setSwitch {others: true}, one undo step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: comp.new/comp.settings clamp sizes to 30,000 px, frame rates to
0.001-1000 fps and motion-blur samples to 2-64, but reading a project
(.ecproj and .ecprojx, templates, recovery, offload) accepted any value:
a 4-billion-px comp, solid or footage frame, a 0 or 10^18 fps rate
(zero-length frames), a negative duration or 4 billion blur samples all
reached the renderer. New Solid, Layer Settings, Import Solid/Placeholder,
Crop Comp and PSD import set sizes without the upper bound, and comp
sizes past 2^32 wrapped.
Fix: one set of limits in effectcraft_project::limits. Project::from_json
brings every item (and proxy) within them; from_json_repaired also says
what it changed, which file.open returns as `repaired` and shows in a
toast, so the project still opens. Project::add_item applies the same
limits to every new item, and the size-setting commands clamp with the
shared helpers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: In Advanced 3D, an extruded shape or text layer was one mesh in
its paint colour. After Effects colours the front, bevel, side and back
of an extrusion separately (shape Contents ▸ Add ▸ Front/Bevel/Side/Back,
text Animate ▸ Front/Bevel/Side/Back), and EffectCraft had none of it.
Fix: The extruder can split its mesh by surface (front cap, bevel rings,
walls, back cap). Shape layers get Front / Bevel / Side / Back contents
items (layer.addShapeItem kinds frontColor…backColor, one item per
group, colouring every paint of the group and its nested groups; the
innermost wins). Text animators get Front / Bevel / Side / Back Color,
blended over the character's fill or stroke by the selection. Paints
with a surface colour render as one mesh per surface. Menus, the
Contents Add: pop-up and the menu translations list them. The other
surface material properties (Ambient, Diffuse, Specular, Metal,
Reflection, ...) remain.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The params parser reads ':' as the start of a value, so 'OpenType?:
discretionaryLigatures?' declared a bogus OpenType key and hid
discretionaryLigatures, and 'ss01?…ss20?' declared only ss01.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Those edits offset the combined Position property, which a separated layer does not render. X and Y Position, including their keys, now move by the same amount.
Convert Position values and spatial tangents into the new parent space.
Preserve supported static Orientation and Scale in constant uniform
parent spaces, and convert spatial Position ease speeds for uniform
transforms. Retain the compensation and Undo/Redo regressions.
Refs #348.
Co-authored-by: Codex <codex@openai.com>
Right-clicking a property's name in the Timeline did nothing, so
Position's dimensions could be separated only from the Graph Editor.
As in After Effects, it now opens the property's menu: Reset, Edit
Value…, Separate Dimensions (Position and, once separated, X / Y / Z
Position, checked), Add / Remove Expression and Add Property to
Essential Graphics. Only Position separates, as in After Effects
(Scale stays one property).
`prop.reset` without `default` used to leave the value as it was: it
now gives the property its own default (an effect parameter's, or a
Transform property's, shared with Layer ▸ Transform ▸ Reset), which
also makes the Properties panel's Reset reset the values. `prop.set
{layer, prop}` without `value` opens the value dialog, like
`keys.set`.
Tests: timeline_property_names_have_the_property_menu
(ui_blank_context_menus), reset_gives_a_property_its_default (engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Tools bar had Fill and Stroke swatches and a Stroke Width, kept in
the interface only, so agents couldn't set them and new shapes could
only be a solid fill with a solid stroke. As in After Effects:
- With a shape layer selected and a shape tool or the Pen active, Tool
Creates Shape / Tool Creates Mask choose whether drawing adds shapes
to the layer or masks on it (Fill and Stroke hide while drawing
masks).
- Clicking the word "Fill" or "Stroke" opens Fill Options / Stroke
Options: None, Solid Color, Linear Gradient or Radial Gradient, the
blend mode and the opacity. The swatches show the kind; Alt-click
steps through the kinds.
- New shapes and Pen paths are painted with them: a Gradient Fill or
Gradient Stroke across the shape for the gradient kinds.
The options are engine state (EditorState.shape_tool) set with the new
shape.toolOptions command; shape.newShape and shape.newPath use them
unless given paint parameters (which now include fillType, fillBlend,
fillOpacity and their stroke twins; layer.newShape takes them too). A
Pen path without paint parameters now takes the Tools bar's stroke
(none by default) instead of a fixed 2 px white one. layer.addMask also
draws rounded rectangle, polygon and star masks, so every shape tool
makes a mask on a selected footage or solid layer (rounded rectangles,
polygons and stars made a new shape layer).
Test: shape_tool_options_paint_new_shapes,
masks_of_every_shape_tool_kind,
tool_creates_mask_draws_a_mask_on_the_selected_shape_layer,
fill_options_paint_the_next_shape.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With a shape layer selected, the Rectangle, Rounded Rectangle, Ellipse,
Polygon and Star tools made a new shape layer for every shape. After
Effects draws into the selected shape layer instead: the shape becomes a
new group on top of its Contents ("Rectangle 2", ...), placed by the
group's Transform. The new shape.newShape command does that (in the
layer's space, so a moved or scaled layer still gets the shape where it
was drawn), and makes a new shape layer only when no unlocked shape
layer is selected. The viewer's shape tools use it; masks on other
selected layers are unchanged. layer.newShape and the Pen's
shape.newPath share its layer and Contents helpers.
Test: shape_tools_draw_into_the_selected_shape_layer,
shape_tool_draws_into_the_selected_shape_layer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each layer switch toggled on its own click only, so hiding or locking
many layers took a click per layer. As in After Effects, pressing a
switch in the A/V Features or Switches column now sets it at once, and
dragging up or down gives the same switch of every layer the pointer
passes the state the first one got, whatever their own state was
(rows passed in a quick drag included). The whole drag is one undo
step: layer.setSwitch takes a `merge` key like other gesture edits.
A single click still changes only that layer, so clicking the eye of
one selected layer doesn't change the others (Layer > Switches still
sets all selected layers).
Test: dragging_over_layer_switches_sets_them_all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Trim Paths, Merge Paths, Repeater and the other path operations
existed (layer.addShapeItem) but no menu added them to a shape layer.
Like After Effects, a shape layer's Contents row now has "Add:" with
Group, Rectangle, Ellipse, Polystar, Path, Fill, Stroke, Gradient Fill,
Gradient Stroke and the path operations; with a shape group selected
they go into it. layer.addShapeItem gains the empty Path and Gradient
Stroke kinds.
A 3D text or shape layer in a Classic 3D comp now shows Geometry
Options with "Change Renderer…", which opens Composition Settings on
its 3D Renderer tab (Advanced 3D comps show the extrusion options).
Popup menus are as tall as the window allows and open upward near its
bottom: the 20-entry Add menu was cut at 420 px, hiding Trim Paths.
Tests: shape_contents_add_menu_adds_path_operations,
classic_3d_shape_layers_offer_change_renderer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018gnTnH3Jmk5zr4tMq1Mc9f
The Composition viewer ignored drags from other panels. Now, as in After
Effects:
- A Project item dropped on the viewer becomes a layer centred where it
lands (above the selected layer, like any new layer); while dragging, the
viewer is outlined and the layer's frame follows the pointer.
- Media Browser files do the same; files dropped from the OS file manager
do too when the platform reports where the pointer is during the drag
(otherwise they import as before).
- An effect from Effects & Presets goes on the layer under the pointer,
which is outlined while dragging.
layer.addItem and layer.newModel take `position` ([x, y] comp px).
file.import takes `addToComp` with `time`, `index` and `position`;
mediaBrowser.import shares it (file::add_to_comp): layered files go in as
their comps, the comp they were dropped in stays open, and items that
can't be layers are reported in `errors`. viewer::layer_at is the hit
test pick() and the drop share.
Tests: ui_drag_drop.rs (project item and effect dropped on the viewer)
and imported_files_go_into_the_comp_where_they_were_dropped (engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Project item (or Media Browser file) dropped in the Timeline always
went above the selected layer, starting where new layers start.
Now, as in After Effects, a line shows where it goes in the stack (above
the first layer row whose middle is below the pointer, else below the
last), and over the time graph a marker with a timecode tag shows its In
point, which follows the pointer (frame-snapped) or, with Shift, the
current time. The layer reorder drag shares the insertion logic.
layer.addItem and layer.newModel take `index` (1-based stack position);
mediaBrowser.import passes `time` and `index` on, one layer under the
other.
Tests: project_items_land_where_they_are_dropped_in_the_timeline
(ui_drag_drop.rs, real pointer drags: outline, time graph, Shift, below
the last layer) and add_item_at_a_stack_index_and_time (engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Following AGENTS.md's Never crash rules for the M3 / M4 additions:
- Cache Frames When Idle panicked (`clamp` with min > max) when the work area was inverted
(start set past the end); an empty work area now has nothing to cache.
- `file.newCompFromSelection`: the sequence overlap times the layer count overflowed for a huge
`overlapDuration` (wrapping to a wrong comp length without overflow checks); negative or
non-finite values fall back to 1 s and the product saturates. The lead item is read with
`get()` instead of indexing.
- Layer Settings' enablement reads the first selected layer with `first()`.
- Regression tests for both (each failed before the fix).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Removes the engine's production expect() calls: background-job polling (camera, mask, roto,
point and warp tracking, render queue) uses let-else / if-let instead of take().expect("job"),
command helpers bind what they checked instead of re-reading it with expect, the menu bar falls
back to an empty tree (logged) instead of expect()ing that a constant parses, and
autotrace/text animator group lookups no longer expect a just-inserted group. perf.rs, the
benchmark harness behind `effectcraft-cli bench --ops`, opts out with a module-level allow.
Test-only unreachable!() calls become panic!() (clippy.toml allows panics in tests). Denies the
panic lints in the crate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Pre-compose makes the new composition with the original's pixel aspect, background, motion
blur and frame blending settings and 3D renderer (`Comp::nested_like`); it kept only size,
rate and background.
- File ▸ New Comp from Selection records one undo step (two per item before) and takes each
item's pixel aspect. Several items selected open the New Composition from Selection dialog:
Single / Multiple Compositions, Use Dimensions From, Still Duration (default from Settings ▸
Import ▸ Still Footage), Add to Render Queue, Sequence Layers with Overlap, Duration and
Transition. `file.newCompFromSelection {single, dimensionsFrom, duration, addToRenderQueue,
sequence, overlap, overlapDuration, transition}`; `layer.addItem {duration}` for stills.
- Docs: parity.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Locked layers can't be selected (Timeline click, Select All, Ctrl+Up/Down; shy layers while
hidden too) and are left alone by Clear/Delete, Arrange, Layer ▸ Transform and Center Anchor
Point, which fail when every target is locked (`commands::unlocked`, `commands::selectable`).
- Deleting a parent unparents its children where they are, in the same undo step: the
pick-whip compensation moved out of `layer.setParent` into `layer::parent_fixes` /
`ParentFix::apply`, which now also handles separated X/Y Position.
- Bring Forward / Send Backward move each selected layer one step (a non-contiguous selection
was squeezed into one block).
- Center In View / Fit to Comp keep a 3D layer's Z (and Fit keeps Scale/Anchor Z); Reset /
Center / Fit / Center Anchor Point work with separated dimensions (`layer::update_position`).
- Duplicate and paste keep parents and track mattes, following the copies when both were
copied; paste dropped them always.
- Docs: agents, parity.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Layer ▸ Layer Settings on a solid or adjustment layer opens Solid Settings on the layer's
solid (it ran an empty command before): name (renames the layer and the solid), size, Pixel
Aspect Ratio, colour, and "Affect all layers that use this solid". It starts off, as in After
Effects, so changing a solid other layers share gives this layer its own copy.
`layer.settings {pixelAspect?, affectAll?}` → `{layer, solid?}`; `layer.newSolid {pixelAspect?}`.
- Nulls ask for their name; text and shape layers have no settings (the entry is disabled).
- Composition Settings / New Composition and Solid Settings register an automation id for
every control (`dialog.comp.*`, `dialog.solid.*`). Composition Settings takes any typed frame
rate besides the list, and New Composition starts from the last settings used.
- Colour buttons in both dialogs show the stored sRGB colour (`widgets::srgb_color_button`);
egui's linear picker showed it lighter.
- Docs: agents, parity.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
CharStyle/TextDoc variations (layer.setText variations), shaped with harfrust instances so
advances follow HVAR/gvar, outlines drawn at the design-space position, animator deltas relative
to the style's values, Character panel Variable Font Axes fields (character.axis.<tag>).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reconciled with main's keyframe labels (same Keyframe::label field; keys.setLabel and
keys.selectLabelGroup from main are kept, M14.5's duplicates removed; Edit ▸ Label on
selected keys delegates to the label helper), proxies (RenderOpts::proxy next to
nested_switches/draft_shadows), offloaded renders (Work carries nested_switches), wasm
audio pump (preview mix rate), variable font axes and mask feather points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Items (footage and comps) carry a proxy rendered in their place at the source's size when
its switch and Render Settings > Proxy Use allow it; Create Proxy queues a half-resolution
render whose post-render action attaches it. Interpret Footage gains Separate Fields
(upper/lower first, fields become frames at twice the rate), Guess alpha with matte colour,
explicit matte colour, Invert Alpha, Interpret As Linear Light; non-square footage, solids
and precomps are stretched by their pixel aspect in the comp. The four proxy stubs are gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
sampleImage renders the sampled layer through the evaluating renderer's footage source
(EvalCtx::footage), cached per thread and frame. File > Import reads .json/.csv/.tsv as data
footage kept in the project. expr.errors collects failing expressions for the error bar;
expr.languageMenu lists the categorised Expression Language menu. Marker keys expose
protectedRegion and cue points; colorDepth, timeToFeetAndFrames, comp.activeCamera.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Native menu bar (apps/effectcraft, muda, macOS only): the engine's After Effects
menu tree mirrored into NSMenu through a pure, serializable spec
(ui-egui native_menu: submenus, separators, live labels, check marks, enabled
state, Cmd/Ctrl/function-key shortcuts as accelerators, Open Recent). Hide /
Hide Others / Show All are macOS' predefined items (app.hideOthers/app.showAll
are real commands now, via NSApplication); Services added; About, Settings and
Quit dispatch our commands. State is pushed only when the session revision,
selection, history, settings or journal change; structural changes rebuild.
Activations dispatch the same command ids as the in-window bar; Edit
Cut/Copy/Paste/Select All/Undo/Redo act on a focused text field. Settings >
Appearance > Use In-Window Menu Bar on macOS switches back.
Timeline: column visibility from the column header's context menu (A/V
Features, Keys, Label, #, Comment, Switches, Modes, Parent & Link, In, Out,
Duration, Stretch; Source/Layer Name toggle), Comment editing
(layer.setComment), draggable In/Out/Duration cells, Stretch opens Time
Stretch; property search filters layers and reveals matching properties with
their groups; Shift+P/S/R/T/A/E/M/F/L/U add to the revealed properties; UU
reveals all modified properties; Shift-drag in the ruler snaps the CTI to keys,
in/out points, markers and the work area. Commands: timeline.column,
timeline.sourceName, timeline.search, timeline.revealAdd.*.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New crate effectcraft-model (L2): glTF 2.0 (.gltf/.glb, data URIs, external buffers and
images, PBR metallic-roughness with base/MR/normal/occlusion/emissive textures, node
hierarchy, skins, step/linear/cubic animations) and OBJ/MTL import, parametric primitives,
extruded/bevelled outline meshes and polygon triangulation with holes.
Project: FootageKind::Model, LayerSource::Model/Primitive, Layer::environment, Geometry and
Material Options builders, Environment light Source. Media probes and loads models
(FootageSource::model). Engine: layer.newModel, layer.new3dPrimitive/newPrimitive,
comp.renderer, layer.environment, material.set/reset/duplicateAssign/revealSource (stubs
replaced); File > Import and layer.addItem pick up models. Hand-written fixtures with
attribution sidecars.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Type tool point/box text creation, double-click editing, caret and selection
in the viewer (viewer_text.rs), keyboard/IME/clipboard, box handles; engine
text.edit/endEdit/setSelection/moveCaret/insert/delete, layer.setText range,
caret insertion style, Paste Text and Match Formatting / Paste Text
Formatting Only (stubs removed); Character/Paragraph/Properties panels act
on the selection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Collapsed precomps draw their layers straight into the parent with
concatenated transforms and multiplied opacity (nested blend modes and
adjustment layers act on the parent); a non-Normal mode, track matte or
Preserve Transparency composites the collapsed result as a whole; masks,
effects or styles force a flattened render. Nested 3D layers use the
parent's camera and lights and join the parent's 3D run when the precomp
layer is 3D. Continuously Rasterize re-rasterises text and shape layers at
their on-screen scale. Draft quality samples nearest-neighbour, Wireframe
draws the layer bounds. layer.slip / slipBack (Alt+PageUp) / slipForward
(Alt+PageDown) and dragging the timeline source bar slip the source under
fixed in/out points, clamped to the source duration; undoable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Marco Arnulfo