* Footage: use resolve_absolute for stored paths
* Lottie and models: use resolve_absolute for linked files
* CI: release only with git dependencies from storytold
* Use the shared git-sources check and pin checkout in release.yml
* Resolve a model's side files through resolve_absolute; report C:\x as invalid
* CI: parse cargo config, including the legacy .cargo/config, in the git-sources check
* Dev profile: line tables only for workspace crates, no debug info for dependencies
* xtask ci: dev-profile gate, nextest, tests without examples, wasm --keep-going
* One integration-test binary per crate
* xtask ci: run effectcraft-gpu's shared-device tests in one cargo test process
* xtask ci: run every stage and report all failures
* xtask ci: name the stage type (clippy type_complexity)
* xtask ci: run every test pass and report all failures
* cargo fmt
Resampling footage audio divided by the requested mix rate, so a rate of 0 panicked. The test decodes a 44.1 kHz WAV at rate 0 and expects a read of the requested length. Without the guard it panics with 'attempt to divide by zero'.
Review: two footage items of one file with different nominal sizes could share a sized entry,
though one is resampled and the other kept as decoded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review: still_at_size returned a smart object's pixels unresampled when they differed from the
footage's nominal size. It now follows footage_buf: pixels larger than nominal are resampled to
the requested size, smaller ones are left for the renderer to scale up.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review: frame_at_size at a still's native size made a second cache key, so the pool decoded
and kept a second full-size copy of a frame thumbnail() or frame() already had.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The media pool honoured the requested size only for movies; stills came back
at full size and the renderer resampled them on every frame. A 21120 px wide
plate at Quarter was re-filtered each frame, and four of them (1.85 GB as f32)
did not fit the 1 GiB pool, so they were also decoded again and again.
Stills are now resampled once with effectcraft_raster::resample (the same
call the renderer made, so pixels are unchanged) and the pool keeps the
reduced copy under the sized key.
#1812 project at Quarter, CLI bench: 410 ms -> 33 ms a frame (26 ms with the
layer cache); desktop playback 2% -> 60-99% of real time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Tests that share a fixture each generate it on a first run and rename
their temp file into place. On Windows the losing rename fails with
PermissionDenied while the winner has the file open. Treat a failed
rename as "another test made it first" when the fixture exists, as
`png_sequence` already does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
One list of movie extensions, in effectcraft-project, with AVI added:
FilmCraft reads AVI 1.0 / OpenDML. Tests against ffmpeg fixtures: Motion
JPEG with PCM audio, an unsupported codec (imports and says why it has no
picture), a file that isn't an AVI (an import error), and a damaged one
(a truncated recording imports as far as it goes; a garbled packet loses
its own frame only).
FilmCraft reorders AAC channel configuration 12 (7.1) to WAVE/SMPTE order,
as it does 3 to 6, so 7.1 AAC's left channel was mixed as the centre. The
downmix oracle test gains 6.1 (a program config element, left in AAC's
order) and 7.1 AAC fixtures.
Footage paths stored in a project are resolved through craft-docpath against
the project file when it is opened or imported: relative paths are taken from
the project's folder, and an item whose path is on another computer, names a
device or is a non-file URL is marked missing without being looked at. The
footage check, the changed-on-disk scan, Reload Footage, Relink, Edit Original
and Reveal in Finder resolve the path again before touching the file, and the
Project panel, Metadata panel and waveforms read no file details of missing
footage.
Lottie image assets are resolved against the Lottie file; one on another
computer is skipped with a warning. Files a 3D model names are read only when
local or on the model's own share.
Reveal in Finder refuses a folder that would open as an app or other bundle.
Files imported or relinked in this session are opened as given.
Problem: the hardware-decoding work (#819) needs a newer FilmCraft than the
pinned 2c5ba7a, and the pin bump should be reviewable apart from it.
Fix: move all filmcraft-* deps to 4e2d0bc2. Adapt to MediaInfo.audio ->
audio_streams and VideoStreamInfo.hdr; ask the pool for a quarter into the
frame because FilmCraft now rounds requests half up; adapt rotation and the
AAC downmix; use Decoder::with_threads(1) in the VP9 tests. No
filmcraft-platform, no hardware setting.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The PDF / Illustrator import dialog now offers Composition - Retain Layer
Sizes. Each file layer's footage is cropped to its artwork bounds (fills,
stroke outlines, images, clips) and positioned to keep its place on the
page. Decoding, continuous rasterisation, shape conversion and reload share
one crop (effectcraft_pdf::layer_doc_with_sizes), so they agree.
Also collapses a match guard in the STL reader for current stable clippy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Phones and messaging apps store frame times rounded to whole milliseconds
(33/34 ms at 30 fps, 16/17 ms at 60 fps). FilmCraft's reader takes the
median duration, so such clips imported at 30.303 or 58.824 fps, and New
Comp from Selection and renders followed that rate. When the median is no
standard rate, the durations near it are averaged and snapped to the
standard rate within 0.5 %; exact and variable rates keep the reader's
estimate.
- Footage sources: the cancellable wrapper (#784) forwards frame_with (#752 float curves)
and problem (#887); problem's default lives on the trait.
- Media: a called-off decode (#784) is not a footage problem (#887).
- Effect Controls rename (#953): Escape cancels (egui drops focus on Escape the same
frame), the Rename item is translated; regression test.
- i18n (#873): drop the /out-i18n/ ignore rule and the note about an uncommitted script.
- Tests: text range selector caps (#926) re-borrow the layer; the RAM preview test (#793)
sets the comp's own Resolution (#462).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#755 decoded stills of an extension-decided format with load_from_memory_with_format,
bypassing #827's oriented decode: load_oriented now takes the format.
The DPX ffmpeg oracle test expected the bare codec name; ffmpeg builds that write
the transfer characteristic make it "DPX 8-bit RGB, linear".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Opening movies in place (#796) skipped the whole-file bytes #827 read the
track matrix from, so the pool and the probe lost the turn for movies on
disk. stream::movie_header reads just the ftyp and moov boxes (bounded,
positional reads) and both in-place paths derive the orientation from it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: footage audio kept only its first two channels, so the centre, LFE and surrounds of a 5.1 file were dropped. AAC 5.1 was worse: FilmCraft's AAC-LC decoder delivers AAC's own order (C L R Ls Rs LFE), so the left output was the centre and front-right was lost.
Fix: crates/media/src/downmix.rs holds one ITU-R BS.775 stereo downmix (centre and surrounds at -3 dB, LFE left out, fixed normalisation by the largest row sum so full scale cannot clip), with channel orders for 3 to 8 channels in WAVE/SMPTE order and AAC's native order, and only the front pair for more than 8. MediaPool::read_stereo applies it, which preview, waveform and export mixdown all read through. Mono and stereo are unchanged.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Problem: a movie whose profile the software decoders lack (H.264 High 4:2:2 / 10-bit)
probes fine, then every frame read fails; MediaPool logged the error per frame and returned
None, so the layer rendered black with no sign why in the viewer, Project panel or for agents.
Fix: MediaPool records the reason once per file (codec from the probe plus the decoder's text
without error wrappers; I/O errors stay with missing-footage handling), logs it once, and
exposes it through the new FootageSource::problem. The Composition viewer shows it on the
affected layer, the Project panel marks the item with a warning whose tooltip is the reason,
and project.summary / footage.info carry a "problem" field. Cleared when the file is
forgotten; only set when decoding really failed, so a hardware decoder that handles the file
shows nothing.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A movie shot with a phone held upright stores sideways frames and says so
in its video track header; it imported lying on its side. Probing now
reports the turned size, and decoded frames (full and reduced size) are
turned to match. Only the rotation is used, snapped to a quarter turn;
mirroring, scaling and offsets in the header are ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A photo taken with the camera held sideways (or a mirrored scan) imported
as stored, lying on its side. Probing now reports the size the picture is
seen at, and the still and smart-object decodes apply the rotation or
mirroring to the pixels. A missing or invalid tag decodes as stored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: probe() and MediaPool's movie sources called std::fs::read and then
filmcraft_codecs::open_bytes, so a clip cost its full size in memory, twice
while probing (a 245 MiB MP4 peaked at 494 MiB just to import).
Fix: container footage on disk is opened through a positional-read
ByteReader (stream::FileReader) and FilmCraft's reader openers
(filmcraft_media::reader::open_reader; MP4/MOV, Matroska/WebM, MXF, Ogg,
MPEG-PS/TS), which read the index and then single samples. Probing takes this
path only when nothing probed before containers (still/model extensions,
PSD/SVG/PDF, image magic) claims the file; everything else, whole-file audio
formats, in-memory files (add_bytes) and wasm32 builds keep the byte path.
Regression test: probing and decoding a frame and audio of a movie with a
256 MiB tail grows peak RSS by <64 MiB (512 MiB before), same results.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: scrubbing a long movie showed the frame under the pointer
seconds after the pointer stopped. Every viewer frame a free frame-pool
thread had started kept running: each seeked the movie's one decoder and
decoded up to a GOP, and the newest frame waited behind all of them on
the decoder's lock (45 min 1080p H.264/HEVC, GOP 250: 1.8-3.6 s for the
last frame of a drag; a single jump is 0.1-0.4 s). FilmCraft's decoder
already polls a cancellation flag, but nothing set one.
Fix: FootageSource::cancellable / called_off and CancellableFootage (a
per-render view whose frame reads run under the render's own flag, so
reads on other threads answer to the right render). MediaPool runs them
under filmcraft_media::cancel::with_cancel. The frame workers render
through it, and a newer viewer frame calls off the comp's running viewer
frames of other times. A called-off render is not cached (frames, disk,
layer cache). Drag latency is now 0.1-0.3 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tylerjenningsw