A split's first side was sized with `f32::clamp(20.min(avail), (avail - 20).max(0))`.
`f32::clamp` panics when its lower bound exceeds its upper one, which happened for any
split with 0 < avail < 40 pt. Dragging the viewer/Timeline divider up takes the area above
it down to 40 pt, so the splits nested there (the right column's vertical split and
others) got about 36 pt and the layout panicked; no guard covers egui's update, so the app
closed with no dialog.
The split size now goes through `split_first` / `clamp_ordered`, which never panic: when
the room is too small for both minimums the lower bound wins, and non-finite sizes fall
back to it. The gutter drag uses the same clamp.
Tests: a dock unit test lays out every workspace in rects too short and too narrow for its
minimums (it panicked before) and checks `split_first` on hostile sizes; a kittest drags the
divider above the Timeline 2000 pt up and 3000 pt down.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Cause: the Roto Brush and Refine Edge diameters live in the editor state and
the roto.options command sets them, but the UI never did: the Layer panel
only painted strokes and the bottom bar only set the view mode, so the brush
size could not be changed.
Fix, as in After Effects: Cmd-drag (Ctrl-drag on Windows and Linux) in the
Layer panel resizes the active brush (Roto Brush or Refine Edge) without
painting. The circle stays at the press point, its edge follows the pointer,
and the size is shown while dragging. The tools bar shows a Diameter field
(header.roto.diameter) while a Roto Brush tool is active. Both go through
roto.options, and the next stroke uses the new radius. Diameter is in all
four interface catalogs.
Test: roto_brush_ctrl_drag_resizes_the_brush (a 20 px Cmd/Ctrl-drag makes a
40 px brush and paints nothing, the next stroke's radius is half of it, and
the Diameter field is registered).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
(cherry picked from commit b4183c28eea34ba097d7a16153b84fcf7aeea045)
Cause: Apply Color LUT's only parameter, `lut`, was ParamUi::Hidden (set only
through commands), so the effect could not be used from the UI. Effect
Controls also had no widget for any ParamUi::Text parameter (only EXtractoR's
channels had one), so Cryptomatte's Selection, the OCIO effects' config file /
file / config names and Colorama's Output Cycle could not be set either.
Fix: a new ParamUi::File { filters } for paths. Effect Controls shows the
file's name (None when empty) and a Choose... button that opens the host's
file dialog with those extensions and sets the path (prop.set, so agents use
the same command). As in After Effects, applying an effect with an empty file
parameter from the UI (Effect menu, Last Effect, drops, Effects & Presets)
opens the file dialog straight away; cancelling keeps the effect without a
file. Apply Color LUT's LUT (.cube) and the OCIO Config File (.ocio) and File
(.cube/.3dl/.csp/.cc/.ccc/.cdl/.spi1d/.spi3d/.spimtx) use it. Text
parameters get a single-line field that sets the value when it loses the
focus (Esc keeps the old text). Saved projects are upgraded on open: a
Hidden or Text parameter whose spec is now a File parameter takes the File
UI and keeps its path (effects::migrate). docs/effects.md regenerated.
This covers #473's first part (the Selection field); picking mattes in the
viewer, the layer popup from the file's metadata, the GPU path and quoted
commas are separate.
Tests: effects hidden_and_text_paths_become_file_parameters (migration); ui
file_and_text_parameters_have_widgets (the LUT is asked for on apply and
inverts red to cyan, the Choose... button picks another LUT, typing into
Cryptomatte's Selection sets it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
(cherry picked from commit 403863f703999d19d3a83d9976f76bdc7577e682)
Cause: SequenceOptions::from_params defaulted `sequence` to true for
file.import, so any numbered still (IMG_0001.jpg) brought its whole numbered
run from its folder, and several picked or dropped stills with a common
prefix became one sequence. Dropped files never asked, and the Import
dialog's "<format> Sequence" checkbox started ticked.
Fix, matching After Effects: file.import takes picked and dropped files as
stills unless `sequence: true` (the Import dialog's Sequence checkbox, which
now starts unticked; Force Alphabetical Order implies it), while the numbered
stills inside a picked or dropped folder still import as sequences
(SequenceOptions::folders), and `sequence: false` (Alt-drag of a folder)
imports a folder's files one by one. Replace Footage, reload, proxies and
render outputs keep detecting their sequence (SequenceOptions::default and
from_params are unchanged), and mediaBrowser.import keeps bringing a numbered
still's run unless `sequence: false`. docs/footage.md and docs/agents.md
describe the new defaults.
Tests: sequence import_takes_stills_unless_asked_for_a_sequence and engine
numbered_stills_import_as_stills_by_default (one dropped still and two picked
IMG_ stills stay stills, a dropped folder makes one sequence, the checkbox
brings the run); the existing sequence tests pass `sequence: true`; ui
import_dialog_offers_the_image_sequence_option (unticked by default: a still;
ticked: the run) and a_dropped_folder_imports_as_one_sequence_with_sequence_interpretation
(two dropped frames: two stills; the folder: one sequence).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
(cherry picked from commit aa3c31db9ab3a774ee2f8ba867e1bafc1fce7aba)
The cache bars count the frames of `shown_series`, which rebuilds the
series from the frame key's scale in thousandths (333 -> 0.333). The key's
`opts` hashed the render options with the f64 scale, and the frames had been
rendered at 0.3333..., so the series never matched and the bars stayed empty
at Third (and any resolution that isn't a whole number of thousandths, such
as Custom 1/7).
`opts_hash` now hashes the scale rounded to the key's thousandths, which the
key carries anyway.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Window > Workspace > Save as New Workspace and Save Changes to this
Workspace kept the layout only in memory (`UiState::saved_workspaces` /
`saved_floating`): nothing wrote them, so they were gone after a restart.
They are now written to `workspaces.json` in the settings store (the config
folder on desktop, OPFS on the web) when a workspace is saved, renamed or
deleted, and read back when the app starts; a file that doesn't read is
ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
egui turns Ctrl/Cmd+wheel and a pinch into a zoom factor (zoom_delta)
rather than a scroll, and the Timeline only zoomed on Alt+wheel, so
both did nothing over the layers. They now zoom time around the
pointer, like Alt+wheel. (B stays Set Work Area Start as in After
Effects; Split Layer is Ctrl/Cmd+Shift+D.)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
The Graph Editor's bottom bar lays out 17 text buttons in one row
(about 1100 px) on a painter clipped to the graph area, so on a
normal-width Timeline the right-hand ones (keyframe interpolation and
easing) were cut off and unreachable. Buttons that would pass the bar's
right edge now go, in order, to a » menu at its end; picking one there
runs the same action on the next frame. Hidden buttons register as
timeline.graph.more.<id> while the menu is open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
A Scale property added to Essential Graphics fell into the generic Point
control: two independent fields with no link, so dragging one value
distorted the layer, unlike After Effects, whose Scale control keeps the
chain link. It now draws the link (on by default) with one field per
axis; linked, an edit scales the others in proportion (Alt edits one),
using the Timeline's constrained() (moved to widgets). The link state is
the property's own, shared with the Timeline's chain link.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
The Composition panel's bottom bar drew a hard-coded "Classic 3D"
dropdown that ignored the comp's renderer and did nothing when clicked,
so an Advanced 3D comp still read Classic 3D. It now shows the comp's
renderer (translated) and, as in After Effects, its menu switches it
through comp.settings (one undo step); the automation label is the
renderer's name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
panels/home.rs was in the converted list, but most of its text was drawn
straight from English literals (New Project, Open Project…, the page
tabs, the quick-start tiles, the filter placeholder, the column
headings, the empty states, the Opened/Kind cells and the version line),
so a Chinese interface still showed them in English. They now go through
tr()/tr_args(), with rows in both Chinese catalogs (Traditional's Join
the ArtCraft Discord row was also still English). Automation labels stay
English. The Opened column's plurals are separate rows so each language
words them itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Every colour input opens one picker laid out like After Effects' Color
Picker: a square and slider for the channel chosen with H / S / B /
R / G / B, the new colour over the original, HSB and RGB fields, a hex
field (#RRGGBB, RRGGBB, #RGB) and OK / Cancel. Changes apply live;
Cancel, Escape and the original swatch restore the starting colour.
The 3D light dialog, Essential Graphics and Layer Styles passed sRGB
values to egui's color_edit_button_rgb(a), which reads them as linear,
so picked colours were stored darker (#808080 became #373737). They and
the other dialogs now use the shared sRGB colour button.
The picker and colour helpers live in color_picker.rs; widgets
re-exports them.
Tests: ui_color_hex.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Preserve Project multi-selection when dropping onto the Timeline or Composition viewer. Keep stack order and drop position, skip non-layer project items, and add pointer-drag regression coverage.
Control-channel pointer events (ui.drag) scrub numbers like a mouse but
turn off the edge wrap, so an agent never moves the user's cursor; the
TextBox case of the drag test goes (that plug-in isn't in-tree).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
- file.relinkFootage (#461): close the params doc so checked execution
(MCP, control channel) rejects unknown keys; translate its menu entry.
- general.language lists Português (Brasil) (#217).
- docs/agents.md: set_property / add_keyframe take timeBase (#522).
- #299's MCP test no longer sends get_property a value.
- The Automatically Reload Footage sequence test uses PNG frames.
- h264_frames_at_reduced_sizes (#507): the bar depends on the fixture's
encoder; 50 dB with ffmpeg 6.1's x264.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Ported onto the current language plumbing next to Spanish (catalog codes,
Match System for pt-* locales, native menu Services label, docs, tests);
the language list and settings validation stay the shared LANGUAGES table.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Claude