What: the Composition panel's Resolution (Auto, Full, Half, Third, Quarter, Custom) is now a
property of the composition (`Comp::resolution`, moved with its `Resolution` type from the UI
into the project crate) instead of one global viewer setting. Switching to another comp shows
that comp's resolution, switching back shows the first one's again, and saving and reopening the
project keeps them. `view.res.full|half|third|quarter|custom` and the new engine command
`view.res.auto` set it (headless too, with an optional `comp`); `ui.set {viewer: {res}}` sets
the active comp's and `ui.inspect` still reports `ui.viewer.res`; `comp.info` reports
`resolution` and `resolutionFactor`; View ▸ Resolution's check marks come from the engine.
Why: After Effects saves each composition's Resolution with the project (CompItem.resolutionFactor
is a per-comp attribute). As there, changing it marks the project modified but adds no undo step:
undo, redo and History jumps carry the current values over to the restored state. It is not part
of the comp's pixels (`Comp::same_pixels` ignores it and `Comp::pixel_form` normalises it), so
changing it keeps the comp's RAM and disk cache keys. Auto is not written (serde default and
skip_serializing_if), so projects saved before open with Auto and older versions read new files.
The magnification is not saved per comp: Adobe's documentation doesn't say it is.
Tests: project `comp_resolution_is_saved_and_old_projects_load_with_auto`,
`resolution_factors_and_scales`; engine
`each_comp_keeps_its_resolution_outside_the_undo_history_and_in_the_file` (switching comps,
no undo step, undo/redo keep it, save/open round trip, menu check marks, Custom dialog);
ui-egui `each_comp_keeps_its_viewer_resolution` (the viewer popup on comp A, comp B through
`ui.set`, back to A, unchanged frame cache identity, save/open). They don't build before the
change (no `Comp::resolution`, no `view.res.auto` engine command).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Right-clicking a property's name in the Timeline did nothing, so
Position's dimensions could be separated only from the Graph Editor.
As in After Effects, it now opens the property's menu: Reset, Edit
Value…, Separate Dimensions (Position and, once separated, X / Y / Z
Position, checked), Add / Remove Expression and Add Property to
Essential Graphics. Only Position separates, as in After Effects
(Scale stays one property).
`prop.reset` without `default` used to leave the value as it was: it
now gives the property its own default (an effect parameter's, or a
Transform property's, shared with Layer ▸ Transform ▸ Reset), which
also makes the Properties panel's Reset reset the values. `prop.set
{layer, prop}` without `value` opens the value dialog, like
`keys.set`.
Tests: timeline_property_names_have_the_property_menu
(ui_blank_context_menus), reset_gives_a_property_its_default (engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Tab in a value being typed (hot text) dropped the keyboard: egui moved
the focus to the next widget, and the inline editors asked for the
focus again every frame, which also reset what keys a field keeps for
itself.
As in After Effects, Tab now commits the value and types in the next
value field of the same panel (the next dimension, then the next
property's), Shift+Tab the previous one. The hot-text fields of each
panel register in drawing order; the dock tags each panel's Ui so the
order stays within it. `keep_focus` asks for the focus only when the
field doesn't have it.
Tests: tab_commits_a_value_and_moves_to_the_next (ui_inline_edit:
Timeline and Effect Controls).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The inline expression field took its height from the saved
expression, so lines typed into it ran over the rows below until the
expression was committed.
Its height now comes from the text being typed (up to 8 lines, as
before), and its bottom edge drags it to any height in whole lines, as
in After Effects; the dragged height is kept per property in the
Timeline state (`expr_lines`).
Tests: the_expression_field_grows_while_editing_and_drags_taller
(ui_inline_edit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dropping the expression pick whip on one of a property's values (the X
of Position) referenced the whole property. As in After Effects, a
drop on one value now picks that dimension: `transform.position[0]`;
a drop on the name still picks the whole property.
`prop.pickWhip` takes `target.dimension`.
The rest of #363 is unchanged: inserting at the cursor landed with
#284, and After Effects' property pick whip in the Parent & Link
column is left for later.
Tests: pick_whip_picks_one_dimension_of_the_target (engine),
the_expression_pick_whip_picks_the_dimension_it_is_dropped_on
(ui_inline_edit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A pick whip dragged to the top or bottom of the Timeline's layers left
them where they were, so a property out of view couldn't be picked.
While a pick whip (expression or parent) is held within a row of the
top or bottom edge of the layers, or past it, the layers scroll that
way, faster the deeper, as in After Effects.
Tests: the_pick_whip_scrolls_the_timeline_at_its_edges
(ui_inline_edit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Time Display Style could only be changed in Project Settings. As in
After Effects, Ctrl-click (Cmd-click on macOS) on the current-time
display of the Timeline or the Composition panel now toggles it between
Timecode and Frames (Feet + Frames goes to Timecode). It runs
`file.projectSettings {timeDisplay}`, so it is one undo step.
Under the Timeline's display the other style shows now (frames under
timecode, timecode under frames), as in After Effects; it always showed
frames.
Tests: ctrl_click_on_the_time_display_toggles_timecode_and_frames
(ui_inline_edit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every bounding-box handle in the Composition viewer showed the
north-west / south-east resize cursor, so two corners and all four
edges showed the wrong direction.
Each handle now takes the cursor along the direction it scales, worked
out from the on-screen box: a corner points between its two edges (the
box's diagonal whatever its proportions), an edge handle across its
edge. The cursors turn with the layer's rotation, as in After Effects.
Tests: handle_cursors_follow_each_handle_and_the_layer_rotation
(ui_viewer: a wide box at 0°, 90° and 45°).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cause: pipeline::Cx rendered with Backend::Auto, which picks the CPU or the
GPU compositor for each top-level frame from measured frame times
(render::AutoPick: warm-up on both sides, a re-probe every 48 frames). The
two compositors differ slightly, so frames came out differently depending
on which side the timings favoured in that run, and two GPU exports of the
same frames differed.
Fix: the job renders every frame on the project's renderer, as After
Effects renders a job with one renderer: Backend::Gpu with Mercury GPU
Acceleration (frames the GPU declines still render on the CPU, as they do
in every GPU render), Backend::Cpu with Mercury Software Only. The viewer
and previews keep Auto. Docs (architecture, parity, web) say so.
Tests: render_settings::a_job_renders_on_one_compositor exports ten frames
with a stand-in GPU compositor that keeps Auto history and draws solid
green: with Mercury GPU Acceleration every frame is green and two runs are
identical (with Auto the warm-up sent frames to the CPU: it fails), with
Software Only the stand-in is never asked. The web worker GPU job test's
comment no longer describes Auto.
Diagnosis by @pat-the-wizard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#402 made Effect Controls' rows compact and aligned, as After Effects
draws them, and also added thin separator lines between parameter rows
in Effect Controls and the Timeline, with a Settings > Appearance > Show
Parameter Row Separators preference. After Effects has neither, so the
lines, the preference and the Tokens field go; the compact rows, the
alignment and the automation ids stay.
Saved settings with the old key load as before (unknown keys are
ignored).
Test: ui_parameter_spacing keeps the row geometry, hit target and
nesting tests; the separator tests go with the feature.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Ease Presets panel (#254) is modelled on a third-party panel, so,
as with third-party tools in After Effects, it isn't core any more: it
is `extensions/scriptui-panels/Ease Presets.jsx`, a ScriptUI panel
bundled as an optional extension (Window ▸ Ease Presets.jsx), written
only against the public scripting API. Clicking a preset eases every
pair of neighbouring selected keyframes in one undo step (per
dimension, along the motion path for spatial properties, the keys'
other sides as they play); the fields edit the working curve, which the
panel draws; From Keys, Save, Rename and Delete as before. The twelve
built-in curves are unchanged.
Scripting API fixes it needed (After Effects parity):
- `app.settings` lasts between runs (`script_settings.json` in the
settings folder; `script.settings.get` / `script.settings.save`).
- Per-key methods (`setTemporalEaseAtKey`, `setInterpolationTypeAtKey`,
`removeKey`, the continuous / auto-Bezier / roving setters) no longer
change the user's key selection (they selected the key they edited).
- `keyInTemporalEase` / `keyOutTemporalEase` report linear and
auto-Bezier sides as they play, `keyIn/OutSpatialTangent` the
tangents the motion path plays.
- `selectedProperties` includes the properties of selected keyframes.
- `isInterpolationTypeValid` is false for Linear / Bezier on values that
only hold.
Removed from core: Window ▸ Ease Presets, the `keys.easePreset.*`
commands, `engine::ease_presets` and the `ease_presets.json` store,
`keyframe::EaseCurve` (nothing else used it) and the egui panel. User
presets saved by the v0.6.0 panel move into the panel's app.settings
section the first time settings load (the old file is left as is).
Docs: plugins.md (bundled extensions), parity.md, gaps.md G8, agents.md.
Test: app_settings_last_between_runs,
per_key_methods_keep_the_key_selection_and_report_eases_as_they_play,
spatial_tangents_are_reported_as_the_path_plays (each fails before),
the_ease_presets_panel_eases_every_selected_pair_in_one_undo_step,
a_typed_curve_scales_to_each_dimension_and_follows_motion_paths,
user_presets_save_rename_delete_and_persist,
presets_saved_by_the_old_core_panel_carry_over (script, through the
panel's controls), ease_presets_panel_eases_the_selected_keys_from_its_list
(UI: the panel docks and a click on a preset eases the keys).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
EffectCraft's extension points compared with After Effects' (public
user guide and Scripting Guide) are now in docs/plugins.md, which
becomes "Plug-ins and extensions": scripts, ScriptUI panels and effect
plug-ins, with a short guide and an example panel for writing your own.
ScriptUI panels already came from `Scripts/ScriptUI Panels/` in the
settings folder, were listed at the bottom of the Window menu and
docked as tabs. What was missing: After Effects reopens the panels
that were open when it quit. Now the open panels are remembered in
`scriptui_panels.json` in the settings folder (a panel is added when
it opens and dropped when its tab or its script closes it; quitting
leaves the list), and `window.restoreScriptPanels` opens them again;
the desktop and web apps run it at start-up. A panel whose script is
gone or fails is reported and forgotten, and the others still open.
Where a panel was docked isn't kept, as workspace layouts aren't saved
between launches.
Gaps recorded in plugins.md and gaps.md G8: the Startup and Shutdown
script folders, keyboard shortcuts for scripts, ExtendScript's
`#include` / `#target` directives and `.jsxbin`.
Test: open_panels_open_again_at_the_next_launch (fails before: no
restore command), a_panel_dropped_in_the_folder_is_listed_and_opens_as_a_panel
(script), panels_open_at_quit_dock_again_at_launch (UI: the restored
panel docks with its controls; closing the tab forgets it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Tools bar's Snapping options menu (#265) offered per-feature
toggles (Edges, Corners, Centers, Anchor Points, Mask and Shape Path
Points) that After Effects' Snapping menu doesn't have. It now has the
two After Effects has:
- Snap Edges Extended (as before).
- Snap to Features in Collapsed Compositions and Text Layers: the
visible layers inside a precomp layer with Collapse Transformations
on are snap targets too, mapped into the outer comp (points always,
edge lines while the precomp layer is unrotated); a snap highlights
the precomp layer. Nested collapsed precomps are followed eight deep.
Every layer feature snaps again (corners, edge midpoints, centre,
anchor point, mask and shape path points); the snapping engine itself
is unchanged. `view.snappingOptions` takes `edgesExtended` and
`collapsedFeatures` (and `toggle` of either); the old keys are refused.
Test: collapsed_precomp_features_snap (fails before: no such option),
snapping_options_command_sets_and_toggles (the per-feature keys are
refused), snapping_options_pick_the_targets (AE behaviour kept: edges
extended or not, hidden layers, guides only), and the Snapping menu UI
test (only the two options are listed).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects' Interpret Footage has Start Timecode: Use Source File
Timecode, or Override Start, which changes the timecode the footage
shows and leaves its frames alone. The Start Frame field that trimmed or
padded a sequence's head isn't in After Effects, so it is replaced.
Footage.start_timecode (Override Start, in frames at the footage's
rate; None = Use Source, 0 as file timecode isn't read) relabels source
time: the Footage panel's current time and footage.info's `timecode`
count from it. file.interpretFootage takes `overrideStart` and
`startTimecode` (timecode, read at the footage's rate after any frame
rate change, or a frame number, 0 to 1e9). It applies to every footage
with time, not only sequences, and Reload keeps it. A sequence's frames
always run from its first file's number to its last.
Test: start_timecode_only_relabels_source_time (project),
interpret_footage_start_timecode_relabels_source_time (engine: the
reply, the Footage panel's timecode, frame numbers, Use Source, the
footage's rate, bad values, undo), Reload keeps it, and the Interpret
Footage fields in ui_drag_drop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Effects shows a missing frame of an image sequence as a
placeholder (colour bars) and has no Hold Previous Frame or Skip choice
in Interpret Footage, so EffectCraft doesn't either.
Interpret Footage loses its Missing Frames field, file.interpretFootage
its missingFrames parameter, and Footage its missing_frames setting. A
gap in a numbered sequence's numbering always shows colour bars. A
sequence imported with Force Alphabetical Order still plays its files
one after another (its numbering doesn't count), as in After Effects;
that is now an internal Footage.alphabetical flag, set on import and
kept by Reload. The Interpret Footage note lists the missing frames.
Projects saved before this have no such field and open with the After
Effects behaviour: a sequence with gaps shows placeholders where it
used to close them up.
Test: project sequence unit tests (placeholders, alphabetical order,
projects saved without the flag), tests_sequence (Start Frame instead
of Hold / Skip), sequence_gaps_show_placeholders (media) and the
Interpret Footage fields in ui_drag_drop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Settings > Appearance > UI Scale (appearance.uiScale, 75-200 %, default 100)
scales the whole interface on top of the display's own scaling, live as it is
chosen; Cancel puts it back, OK saves it and a saved scale applies from the
first frame. The Settings dialog's choice rows show a number setting with
choices as its text. Automation id: settings.appearance.uiScale.
egui's own Ctrl+= / Ctrl+- / Ctrl+0 zoom is off now: Ctrl+0 (Window > Project)
also reset the zoom behind the app's back, and the scale is a setting.
Test: engine tests_settings ui_scale_is_a_percentage_from_75_to_200; ui_panels
ui_scale_setting_sizes_the_interface.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The page column had a fixed 590 pt width, a few points more than the dialog had
beside the page list, so the whole Settings dialog scrolled sideways a little.
It takes the rest of the dialog's width now.
Test: ui_scrolling settings_dialog_does_not_scroll_sideways.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
As in After Effects, the right end of the Timeline's time ruler has a
composition marker bin (an original icon drawn in code). Dragging out of it
shows a marker following the pointer along the ruler's marker strip, snapping
like a dragged marker (current time, work area, other markers); releasing over
the time ruler's width adds a composition marker there with comp.addMarker (one
"Add Marker" undo step). Dropped back on the bin, nothing is added. The time
graph ends 18 px before the panel edge to leave the bin a column above the
layers' scroll bar. Automation id: timeline.markerBin.
Numpad * (or * typed with Shift+8), the keymap's Add Marker, now works in the
window too: egui has no key for it, so it comes as text.
The marker glyph and colour are shared helpers now (markers, nested markers,
the dragged marker).
Test: ui_timeline_zoom dragging_out_of_the_marker_bin_adds_a_comp_marker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The in-window menu bar now works from the keyboard as After Effects' does on
Windows: Alt pressed and released on its own focuses the bar, Left / Right move
between its menus and Down, Enter or Space opens one. In an open menu Up / Down
move the highlight (skipping disabled entries, wrapping around), Right opens the
highlighted submenu and Left closes it (on a plain entry they open the next /
previous menu), Enter or Space chooses the entry and Escape closes the menus.
Hovering an entry moves the highlight there, and a highlighted entry scrolls
into view in long menus.
While a menu, context menu or popup list is open, or the bar has the keyboard,
keys go to the menus only: the app's shortcuts don't run (Space started the
preview behind an open menu) and the panels don't see the keys (Enter on an
entry no longer reaches the Project panel's rename).
Tall menus already scroll inside the window since #277 (ui_scrolling's
a_menu_taller_than_the_window_scrolls). F10 stays View > Switch 3D View > Front,
as in After Effects.
Test: ui_menus (shortcuts_wait_while_a_menu_is_open,
arrow_keys_drive_the_menu_bar, enter_chooses_the_highlighted_entry).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Image sequences were found only by the desktop media prober: one picked
numbered still brought its whole run, with no way to import just that
frame, picking every frame made one sequence item per frame, the browser
couldn't make sequences at all, and a gap in the numbering closed up
silently.
The engine now groups numbered stills itself (engine/src/sequence.rs):
one picked file brings its run from its folder, several picked files of
one run import as that range, a picked or dropped folder imports its
files with each run as a sequence, and Force Alphabetical Order takes
every image of that type in the folder by name. `file.import` takes
`sequence` (default on), `alphabetical` and `frameRate`; Replace Footage,
Reload, proxies and render outputs probe the same way. The media layer
probes one file; the browser lists its file table for the run and
registers every frame with its media pool.
File > Import > File... asks, like After Effects' "PNG Sequence"
checkbox, whether picked numbered stills import as a sequence, with
Force Alphabetical Order and the frame rate. Sequences are named
`shot_[0001-0250].png`.
Interpret Footage gains Missing Frames (Show Placeholder, colour bars as
in After Effects, the new default; Hold Previous Frame; Skip) and Start
Frame (the frame number at the footage's first frame: trims or pads the
head). Saved projects keep Skip, so their sequences play as before.
Form notes keep a readable width and the form fits its rows, so OK stays
in view. docs/footage.md explains importing footage and sequences.
Test: tests_sequence (engine: run, picked range, every frame, Sequence
off, folder, alphabetical, Interpret Footage Missing Frames / Start
Frame, Replace Footage and Reload), project sequence unit tests,
sequence_gaps_show_placeholders_hold_or_close_up (media),
import_dialog_offers_the_image_sequence_option and
dropped_frames_import_as_one_sequence_with_sequence_interpretation (UI).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
EXtractoR's Red, Green, Blue and Alpha are text parameters naming
channels, and Effect Controls drew nothing for text parameters: there
was no way to choose a layer or channel. And a multi-layer OpenEXR file
whose colour is only in named layers (`diffuse.R`, Blender's
`ViewLayer.Combined.R`) didn't import at all: the image decoder wants an
unnamed RGB layer ("does not contain non-deep rgb channels").
- Effect Controls: EXtractoR gets a Layer popup listing the footage's
OpenEXR layers. Picking one sets red, green, blue and alpha to its
channels in one undo step, as After Effects' EXtractoR dialog does (a
one-channel layer such as depth goes in all three colours). Red /
Green / Blue / Alpha are popups of the layer's own R, G, B, A, every
channel of the file, and (none). The lists are read only while open,
so playing an EXR sequence doesn't parse files on the UI thread.
- `layer.channels {layer}` lists a layer's EXR layers and channels and
what each layer shows in red, green, blue and alpha, for agents.
- Media: an EXR without an unnamed RGB layer imports and shows its
colour layer (one named combined, beauty or rgba first); its channels
stay available to EXtractoR and the 3D Channel effects.
- Raster: AuxChannels::layers / layer_rgba and split_channel.
Test: extractor_shows_the_chosen_layer_and_channels_of_a_layered_exr
(host: a layered EXR written with the exr crate imports, layer.channels,
EXtractoR renders spec and depth; it failed to import before),
extractor_offers_the_exr_layers_and_channels (UI: Layer popup, one undo
step, channel popup), layered_exr_without_an_unnamed_rgb_layer_imports
(media).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The work area bar had no context menu. Right-clicking it now offers the
work area's commands from the menu bar: Trim Comp to Work Area, Lift
Work Area and Extract Work Area (After Effects).
Test: work_area_context_menu_trims_the_comp (ui_timeline_zoom).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Right-clicking imported footage offered no way to change its
interpretation. As in After Effects, right-clicking an item now selects
it, and footage items' menu has the File menu's footage commands:
Interpret Footage (Main, Proxy, Remember / Apply Interpretation),
Replace Footage, Reload Footage and Reveal in Explorer / Finder, with
the menu bar's labels, shortcuts and enabled state
(menus::submenu_at / entry_for). The panel's Interpret Footage button,
which only ever said to select footage, opens the dialog for selected
footage.
Test: footage_context_menu_interprets_the_footage (ui_project_rows).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The label menus listed the labels' names only, so a label couldn't be
picked by its colour. Every place a label is chosen now shows its
colour swatch before its name, as After Effects does: the Timeline's
label swatch (which now opens its menu on a click too, not only a
right-click), the Project panel's label swatch and a new Label submenu
in its item menu, Edit > Label, keyframe Label menus and the marker
dialog. One shared widget (widgets::label_entry / label_popup) draws
them; keyframe labels now show the names set in Settings > Labels.
Tests: label_swatch_opens_the_label_menu (ui_project_rows),
the_label_swatch_menu_shows_the_label_colours (ui_timeline_switches),
edit_label_menu_shows_the_label_colours (ui_panels).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a mask or shape path's point (or segment) put its points
in a free-transform box but left only the clicked point selected, so
once the box was gone a drag moved that one point. As in After Effects,
the double-click now selects all the path's points too: dragging inside
the box, or afterwards any of the points, moves the whole mask.
The test also draws a mask with the Pen, moves a point and undoes: each
undo takes back one action (the move, the closing, the last point).
Test: pen_mask_undoes_step_by_step_and_double_click_moves_the_whole_mask
(ui_viewer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Position motion path drew a key's spatial handles only where its
tangent wasn't zero, and auto-Bezier keys have none at the path's ends,
so a two-key path (the usual start) had no handles to pull it into a
curve. Auto-Bezier keys now show a handle on such a side too, pointing
where the path leaves the key, a third of the way to the next key;
dragging it makes the key Bezier with that tangent. Linear keys still
show none.
Keyframe Interpolation > Spatial Bezier copied those zero tangents, so
the keys stayed straight with no handles (and read back as Linear); it
now gives them the same handles. The path keeps its shape and timing.
The handles come from the new keyframe::spatial_handles.
Tests: spatial_bezier_gives_a_straight_path_handles (engine),
a_straight_motion_path_has_handles_to_curve_it (ui_viewer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The arrow keys did nothing to a selected layer, so it couldn't be lined
up precisely. As in After Effects, over the Composition panel or the
Timeline an arrow key moves the selected layers 1 pixel at the viewer's
magnification (half a comp pixel at 200 %, so sub-pixel steps come from
zooming in) and Shift+arrow 10, one undo step per press; holding the
key repeats. Not while typing or with mask points selected.
The move is the new engine command layer.nudge {x, y (comp pixels),
layers?}: through each layer's parents into Position (or X/Y Position),
a key at the current time when Position is animated, locked layers left
alone. It shares the Align panel's move.
Tests: nudge_moves_layers_by_comp_pixels (engine),
arrow_keys_nudge_the_selected_layer_at_the_viewer_magnification
(ui_viewer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A footage or precomp layer dragged out past its source's end holds its
last frame, but its bar looked the same all the way, so the source's
end couldn't be seen. That part of the bar (and any part before the
source's start) is now darkened and striped in the label colour, with
an automation id (timeline.layer.<id>.bar.afterSource / beforeSource);
with time remapping on, the remap decides what shows there, so it isn't.
Enable Time Remapping on such a layer put its end key at the extended
out point; it now ends at the source's end, where the last frame starts
to hold (After Effects). Trimmed and reversed layers keep their keys.
Tests: time_remap_on_an_extended_layer_ends_at_the_source_end (engine),
the_bar_past_the_source_end_is_striped (ui_timeline_switches).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging an expression's pick whip always replaced the whole
expression, also while it was being edited (and the editor then wrote
its old text back over the reference). As in After Effects, a pick
whip pressed while the expression is being edited now puts the
reference at the cursor, replacing the selected text, and the editing
goes on with the cursor after the reference. Without an edit in
progress it replaces the expression as before.
`prop.pickWhip` takes the text being edited (`expression`) and the
selection in it (`range`, in characters) to insert there.
Tests: the_expression_pick_whip_inserts_at_the_cursor_while_editing
(ui_inline_edit), pick_whip_inserts_into_the_expression_being_edited
(engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With a Puppet tool, a click off the pins picked the topmost layer under
the pointer by its own bounds, and selected it. So a click where the
deformation had stretched the mesh past the layer's bounds went to the
layer behind (selecting it and giving it a Puppet effect), and any
click on another layer switched to it.
While selected layers have a Puppet effect, a click (or a press that
might start a pin marquee) now works only on them, as in After
Effects: on the layer whose mesh, as deformed now, is under the
pointer (the pin lands on the deformed shape), else the one whose own
art is (a new mesh); elsewhere nothing happens and the selection
stays. Without a rigged layer selected, the tools pick and rig the
layer under the pointer as before.
`puppet::contains` tests a point against a deformed mesh; `puppet.addPin`
uses it too (its own test only held for one triangle winding).
Test: puppet_pins_go_on_the_deformed_mesh_and_the_tool_stays_on_the_rigged_layer
(ui_viewer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Effect eyedroppers (other than keyers', which pick from the effect's
input) sample the composite the viewer shows; a test covers that on
main. But they, and the Info panel, read the shown frame as if it
covered the whole comp. With a Region of Interest, or the Extended
Viewer of a 3D view, the frame covers only that area, so they read a
pixel somewhere else. They now map the point through the area the
frame covers (`shown_region`, `frame_pixel`).
Tests: the_eyedropper_samples_under_the_pointer_in_a_region_of_interest
(ui_effect_controls), eyedropper_samples_straight_colour (fx_widgets).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging a Bezier handle in the Graph Editor changed only that key's
ease. As in After Effects, the same side's handles of every selected
key now move with it, by as much as the pointer moved (time and value
or speed alike), in one undo step. Each handle keeps its offset from
where the drag began, so a handle stopped at a limit (100 % influence)
doesn't drag the others on.
Test: a_graph_handle_drag_moves_the_handles_of_every_selected_key
(ui_keyframes).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
As in After Effects, pressing a property's stopwatch toggles it, and
dragging on over the stopwatches above or below gives every property
the pointer passes the state the first one got (animated or not),
whatever its own, in one undo step. Alt+click still adds an
expression.
The gesture is the layer switches' press-and-drag from #238, moved
into `switch_gesture` and shared by both. `prop.toggleAnimation` takes
`merge` so the drag folds into one undo step.
Tests: dragging_over_stopwatches_sets_them_all (ui_timeline_switches),
stopwatch_toggles_with_a_merge_key_are_one_undo_step (engine).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#284 reported no cache indication in the Timeline. Main has one: a
green line under the work area bar for the frames cached at the
viewer's resolution, view and options (blue for disk-cached frames).
This test pins it down: once the viewer's frame has rendered, the
Timeline paints the green line from the start of the work area.
Test: the_timeline_shows_the_cached_frames_in_green (ui_ram_preview).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shift-clicking a layer's name selected the layers from the last one
clicked to it, but Shift-clicking a layer bar in the time graph only
added that layer. Bars now select the same range (shared with the
name column: `shift_range`), and a click on a bar becomes where the next
range starts, as a click on a name does.
Test: timeline_shift_click_on_layer_bars_selects_the_range
(ui_workflow_selection).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The ruler moved the current-time indicator only once the pointer had
dragged past egui's drag threshold, or on release for a click. As in
After Effects, the time now jumps to the pointer as soon as the button
goes down in the ruler, then follows the drag.
Test: a_press_in_the_ruler_moves_the_current_time (ui_timeline_zoom).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Files dropped on the window or picked in the Import dialog were probed
one after the other on the UI thread: the app froze while a video was
read, nothing said what was being imported or how many files were
left, and only the last new item was selected. People ended up
importing the same file again and again.
file.import takes `background`: the files are probed in a background
job (Window > Progress, jobs.list / jobs.cancel) that names the file
being read and how many there are ("b.png (2 of 3)"); then they are
added in one undo step, all selected (the Project panel scrolls to
them, a file already in the project arrives again as in After
Effects) and a toast reports the count ("Imported 3 items", with the
first error). Drops and the Import dialog use it, and an Importing
card at the bottom left shows the job with its progress bar and
Cancel. Agents and scripts still import at once by default. The
toast registers an automation id.
Test: background_imports_report_progress_and_select_what_arrived
(engine), dropped_files_show_import_progress_then_the_items_they_made
(ui_drag_drop).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Moving a puppet pin keys its Position, but the Timeline didn't show
those keys where people look for them. U revealed every pin's Position
as one more flat "Position" row under the layer, indistinguishable from
the layer's own Position and from each other, and the reveal was a
snapshot: a pin placed or moved after U (or with the layer twirled open
and Effects closed) got keys that no row showed.
As in After Effects, revealed properties inside an effect now show
under the effect and its groups (Puppet > Mesh 1 > Deform > Puppet
Pin 1 > Position), twirled open by the reveal and closable like any
group; Transform and mask properties stay as they were. Placing, moving
or recording a pin in the viewer keeps its Position in view: on a
twirled-open layer its groups open, and a U reveal takes it in. A
collapsed layer stays collapsed. The keys select, move and delete like
any others.
Test: puppet_pin_keys_show_under_their_pins_in_the_timeline,
placing_a_pin_opens_its_groups_on_a_twirled_open_layer (ui_viewer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Learn workspace opens the Home screen on its Learn tab, but no other workspace closed it, so
after Learn the tutorials stayed over Default, Review and the rest until a project was created or
Home was toggled. It wasn't about clicking quickly: any switch away from Learn kept them. Leaving
Learn for another workspace now closes the Home screen it opened.
Test: ui_panels leaving_the_learn_workspace_closes_its_tutorials (clicks through the workspace
tabs: the Home screen and the tutorials show only on Learn).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Most panels lay out their own rows and scrolled only with the mouse wheel: Effect Controls,
Effects & Presets, the Media Browser, Ease Presets and the Timeline's layer rows had no scroll
bar, Properties and Preview a thin indicator that couldn't be dragged, and Render Queue, History,
Markers, Character, Paragraph and Info didn't scroll at all, so a panel shorter than its content
cut it off. Without a wheel or a working touchpad there was no way down. The Project panel had
the only real scroll bars, hand-rolled, and its vertical one was hit-tested under the rows, so it
only dragged where no row was.
- widgets::scroll_bar: the Project panel's bars generalised (horizontal or vertical, drag the
thumb or press the track to move it there, automation id with "scroll/max"); the Project
panel's two bars and the Timeline's column bar use it, drawn over the rows.
- widgets::PanelScroll: the wheel offset, its clamping and the bar for a panel's own rows, used by
Effect Controls, Properties, Effects & Presets, Media Browser, Ease Presets, Preview, Render
Queue, History (which still follows the current state), Markers, Character, Paragraph and Info.
The Timeline's layer rows get a bar on the right edge.
- Effect Controls: an animated vector's values (a puppet pin's Position) ran under the keyframe
navigator in a narrow panel. They now end before it, moving left over the name, which is cut
short.
Test: ui_scrolling panels_taller_than_their_space_have_a_scroll_bar_to_drag (eleven panels in a
short window: a press on the track and a thumb drag scroll them),
effect_values_stay_clear_of_the_keyframe_navigator.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The menu bar's own menus (Edit has 30 entries) had no scroll area, only their submenus did, so
on a short screen Edit ran past the bottom of the window. The font menu was capped at 420
points and never moved up, the Preview panel's and the viewer's popup lists neither scrolled nor
moved, and the Timeline's Blending Mode and Expression Language submenus didn't scroll. egui's
scroll bars also only appeared while the pointer was over the list, so a list could only be
scrolled with a wheel or touchpad.
- widgets::popup_list: the one popup list behind popup_menu, the font menu, the Preview panel's
dropdowns and the viewer's popups: as tall as the window allows, scrolling beyond, moved up to
fit the window.
- widgets::menu_scroll: the same for menus and submenus (the menu bar's, Blending Mode, the
Expression Language menu, the viewer's Select menu).
- Scroll bars always show (solid scroll style), so they can be dragged.
- A first window that doesn't fit the screen is maximized: the 1680 x 1020 default on a smaller
screen is only shrunk to the monitor's size, so with its title bar it ran under the taskbar and
cut menus off at the bottom of the screen even when they fitted the window.
Test: ui_scrolling a_menu_taller_than_the_window_scrolls (Edit in a 520-point window scrolls
its last entry into view and it takes the click); overflows_screen unit test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A dockable panel (our own design) for the keys.easePreset commands. A
value graph shows the working curve with its two handles, which drag
to edit it; Apply eases the selected keyframes with it and From Keys
loads the curve between the first selected pair. Every preset is a
thumbnail drawn in code; a click loads it and applies it to the
selected keys. Save Current keeps the working curve under the name in
the field, and Rename and Delete act on the selected user preset.
Wide panels put the presets beside the graph; narrow ones below it,
the graph shrinking to leave a row of presets, scrolled with the wheel.
The panel state (working curve, selection, name) is serde in the UI
state, and every control registers an automation id (easePresets.*).
widgets::text_field is the search field without its magnifier.
Test: clicking_an_ease_preset_eases_the_selected_keys_and_handles_edit_the_curve
(ui_keyframes); every_panel_registers_automation_ids_for_its_widgets
covers the new panel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Scaling a layer by a bounding-box handle didn't snap, so it couldn't
be scaled exactly to the comp. With snapping on (Cmd/Ctrl toggles it
during the drag), the dragged handle now snaps like a dragged layer's
feature: to the comp's edges, corners and centre and to other layers'
edges, corners, centres and anchor points, as the Snapping options
allow. A corner snaps both axes, an edge its own axis; with Shift the
corner slides along its line from the anchor point to the nearer
snapped edge, so the proportions stay and the layer lands on, say, the
comp's size.
Test: handle_drags_snap_to_the_comp_edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
