* Disk cache: record the source files each frame reads
Part of #3184 (step 1): renders now report which footage files they read,
each with its identity (size and modification time) as read. Nothing uses
the list yet: images, cache keys and cache behaviour are unchanged.
- render: `reads` module with `FileStamp`, `ReadFile`, `ReadFiles` (sorted,
deduplicated, bounded; marked incomplete when it can't vouch for every
file) and the thread-safe `ReadLog`. `Renderer::reads` collects a frame's
files; `FootageSource::recording` lets a source note what it reads.
`file_stamp` uses the same identity.
- Layer cache entries keep the files their buffer was made of and report
them on every hit; derived entries (styles, blend space, flattened) keep
their base's. Buffers from the disk cache or the browser store don't know
their files yet and mark the list incomplete.
- Media pool: every file read notes its identity, taken from the file it
opens. Decoded frames, opened movies, GIFs, models and EXR channels keep
it with the cache entry, so a frame served from memory reports its file
without touching the disk.
- Viewer frame worker collects each frame's list and carries it to where
the disk entry is written (step 2 stores it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Automation: confined footage passes on the files it reads
Part of #3184: ConfinedFootage forwards FootageSource::recording to the
source it wraps, so renders of an automation session list their files
instead of coming back incomplete. The read tests also render through the
viewer's CancellableFootage wrapper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: frame entries keep their source files, comp key from memory
Part of #3184 (step 2). Fixes#3175: opening a comp no longer stamps every
footage file of the project before its first frame can show.
- The comp's content key (`disk_cache::comp_content_key`) is taken from the
project in memory alone: no footage or proxy file is stamped, no
`VirtualFileId` is asked. `comp_content_key_with` is gone; `frame_key`
hashes a new entry version, so entries of the earlier format are never
looked up again (LRU evicts them).
- Frame entries (formats 2 and 3) store the files the frame read
(`EntryFiles`: size and modification time as read; size and content hash
through `VirtualFileId` for files from memory; missing files), then the
pixels. Formats 0 and 1 read as misses and are deleted.
- Check on hit: `get_frame`/`get_frame_f16` look only at the listed files
(one metadata call each) on the frame worker. A changed, back or unreadable
file, or a damaged entry, is a miss: the entry is deleted and the frame
rendered and stored again.
- A frame whose file list is incomplete is shown but not stored. The RAM
preview keeps each frame's files, so `persist_missing` writes only frames
with a complete list.
- Remote frame worker: `FrameServer` records each frame's reads
(`take_files`); the web worker stores them with the entry and the page
checks them through the file table before using it. The browser's media
epoch existed only for the old key and is removed. Export does not use
frame entries.
- The cache indicator still only asks whether an entry exists.
Tests: entry format round trip and damage, the check per file, and in the
viewer: a changed file re-renders exactly its frames (and a reopen reads the
rest from disk); a frame checks only its own files in a project with a large
unused sequence and the key looks at no file; missing, unreadable files and
damaged entries never serve a stale frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: layer entries keep their source files, no footage salt
Part of #3184 (step 3 of 4).
Layer buffers on disk (and in the browser's layer store) now carry the
files they were made of, like frame entries since step 2, and are checked
against exactly those files when used. The project-wide footage salt is
gone: nothing stamps every footage file any more.
- Layer entry format 4: the buffer's EntryFiles, then the pixels. A hit
checks only the listed files (metadata, or the VirtualFileId hook for
files from memory; Missing must still be missing); a change, a damaged
entry or the old format 0 is a miss and the entry is deleted, so the
re-rendered buffer replaces it. A hit reports its file list, so frames
made of buffers from disk are complete and get stored again.
- Buffers whose files can't all be named are not written.
- Layer disk keys: layer_disk_key = hash of the layer entry version, the
renderer version and the layer cache key (which names the footage items
with their paths and settings, from memory).
- PrefetchStore checks on use; an entry made of changed files is dropped
and forgotten, so the new buffer is queued over it. FrameServer passes
its virtual-file hook to its layer cache.
- Removed: footage_salt(_with), file_stamp, footage_stamp,
set_disk_salt, set_store_salt, Session::refresh_disk_salt,
poll_disk_salt, footage_fingerprint, disk_salt, disk_salt_background,
disk_salt_job, DiskSaltJob, the UI's per-frame poll, the salt in
FrameServer and in the availability worker (with its cache_enabled
plumbing). The disk cache is attached as soon as it is configured.
- Docs: architecture.md, web.md.
Tests: layer entries check their files (size, time, missing/back,
folder, damaged, old format, incomplete); virtual files; prefetch store;
media tests with a real pool across restarts (only the changed file is
read, projects with the same item ids never share an entry, missing,
unreadable and damaged never serve stale buffers); engine tests that the
cache is attached at once and edits do no file work (#1926, #3106).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: no-salt worker test, sequence paths in the frame-blend key
Part of #3184 (step 3 of 4).
- A frame-blended footage frame's layer-cache key now hashes the
sequence's file list: with no project-wide salt, two projects whose
items share an id and a first frame must not share its disk entry.
- Test: a frame worker syncing, patching and rendering a project with an
unused 5000-frame sequence asks its file hook only about the file its
buffer reads (the salt asked about every file at every sync).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: the comp key covers what its expressions can read
With an expression anywhere in the project, every comp's disk key hashed
every item of the project, so any edit (another comp, an unused footage
item) threw away every comp's frames on disk. The key now covers what the
comp can draw plus what the expressions among it can reach
(Project::pixel_reach):
- without expressions: the items the comp draws, without silent layers,
plus the footage its precomp layers swap in (Media Replacement);
- with expressions: every layer of the comps they reach, their markers,
the comps and footage they name with string literals (comp("Name"),
footage("Name")) together with which items have those names now, and
the footage named like a reached source (its data is read by name);
- the whole project when an expression computes a name, uses the object
model's constructors or internals, dynamic code, computed keys or
writes, or text the scanner can't read for sure (regex literals,
template strings, escapes): expression_reach errs towards reaching more.
Markers count only where an expression can read them (#1083). Memory
only, no file is looked at.
Tests: scanner and reach unit tests in the project crate; engine tests
for the key (own-comp expressions keep the key through edits elsewhere,
comp("Other") follows Other and not a third comp, a second comp taking
the name counts, a computed name counts every item, markers read from
another comp); a ui-egui test that the disk frames outside an expression
layer are carried when the comp it names changes.
Part of #3184. Part of #1492.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: Reload Footage drops the entries of its files, docs
File > Reload Footage now deletes the frame and layer entries whose file
lists name the reloaded item's files (DiskCache::drop_files), so a file
replaced by one with the same size and modification time, which the
check on hit can't tell apart, is read again. The index knows keys, not
files: the writer thread reads the files section at the start of each
frame and layer entry (not the pixels) after the writes queued before
it, and deletes the entries that list one of the files. Until it is
done, an entry made of one of them is a miss and frames aren't linked to
new keys. The entries are gone for good, so they don't come back after a
restart. Automatic reloads don't drop anything: they follow a changed
stamp, which the check on hit catches. The browser needs nothing (its
file identities are content hashes).
Removed: disk_cache::seal, which steps 2 and 3 left without callers (the
tests use seal_format). Updated the module, seal_format and forget_media
docs, and docs/architecture.md / docs/web.md describe the final design:
what is cached, keys from memory, file lists checked on hit, nothing
scans the project, incomplete lists stay in memory, Reload Footage drops
entries, edits keep the frames they can't change.
Tests: render unit tests (same size and time passes the check but not
the drop; other files' entries stay; an entry queued before the drop is
dropped; a layer entry too; written again afterwards it is used; the
drop survives a restart; a pending drop is a miss), and an engine test
through file.reloadFootage.
Closes#3184. Part of #1492.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: file stamps keep the whole modification time
A file's modification time was nanoseconds since 1970 as u64: a time before 1970
read as "no time" (two such files of one size looked alike) and times after 2554
were truncated. It is now i128 nanoseconds, negative before the epoch; None only
means the file system has no time. The content-key hash writes a presence tag and
the full value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Automation: a refused footage read leaves the render's file list incomplete
Footage outside the read roots shows nothing and was noted as no file at all, so a
picture made without it had a complete, empty list and could be kept on disk for
a later session with other roots. A refused read during `recording` now marks the
list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: a buffer kept by another worker comes with its own files
LayerCache::insert returns the files of the buffer it keeps, and Renderer::keep
notes them in the render's log and returns them, so a render that uses another
worker's buffer lists that buffer's files (a file changed between the two reads
then has two identities and the list is incomplete).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: sampleImage and text fonts note the files they read
EvalCtx carries the render's read log. A sampleImage render records its footage
reads, keeps them with its per-thread cached buffer and notes them in the
evaluating render's log on every use. Text notes the font files it is drawn with,
with the identity their bytes were read with; a family that isn't installed, a
fallback or missing glyph, or a font from memory leaves the list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: frame entries store the whole modification time
A frame entry's file list stores a file's modification time as i128 nanoseconds
since 1970 (negative before), as the file stamps now keep it; the frame entry
format version goes to frame-entry-files-2 so entries in the old layout are not
read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: layer entries store the whole modification time
Layer entries share the frame entries' file list layout, which now stores the
full i128 modification time: the layer entry format version goes to
layer-entry-files-2. The module doc names the font files text is drawn with
among an entry's source files, and what keeps a list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layer cache: buffers that read other layers are keyed by the switches passed down
A layer whose effect reads another layer (Gradient Wipe, Set Matte, Blend…) gets
that layer drawn by its own renderer. Through a precomp layer, Switches Affect
Nested Comps, the switches inherited from the precomp layers above and motion
blur on change those pixels, but the key held only the layers' own switches: a
buffer made with the setting on was reused (from memory or the disk cache) with
it off. Such layers now derive their key with what the renderer passes down.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layer cache: masked buffers are keyed by the mask motion blur gate
A mask with Mask Motion Blur On blurs even when the layer's own switch is off,
as long as the render's gate is open (Render Settings motion blur, and with
Switches Affect Nested Comps the precomp layers above). The key held the
layer's own motion blur state only, so a buffer blurred with the gate open was
reused with it closed (and the other way round), also from the disk cache.
Masked layer, input and footprint keys now tell a closed gate apart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: cached buffers list what their expressions and substituted characters read
- Buffers made under `Renderer::recorded` (layer content, a Time effect's input, an adjustment
layer's footprint) evaluate their masks, shapes and effects with the context that notes into
the buffer's own read log, so a file an expression reads (`sampleImage`, also at shutter times
mask motion blur adds and the cache key doesn't see) is in the buffer's files.
- A styled layer served from the cache lists the files of the cached body and passes too, so
the buffers made of it (flattened, blending space) don't get a complete list when one of them
came with an incomplete one.
- A character put in by Character Offset or Character Value without a relayout notes the font
it is drawn with; a fallback face (or none) leaves the list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: text lists the font file of a run that draws no glyph; tests clean their temp dirs
An empty first paragraph draws no glyph, but in a box its face sets the
first baseline that places every later line. The read list took faces only
from glyphs, so it could be complete without that file. Note each style
run's resolved face as well.
The font-reads and confine tests use tempfile::tempdir(): a fresh
directory per run, removed on panic too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: Reload Footage closes the gaps around its drop (#3184)
- A reload while the disk cache is off is kept on the session
(pending_disk_drops) and applied when the cache is switched on, before
anything is read from it.
- Each render takes the cache's drop generation before it reads (frame
worker; layer cache at the miss). An entry listing a file dropped after
that is refused under the queue's lock, so a render that was under way
during the reload can't store pixels from before it. Such a frame is
shown with an incomplete file list, so persist_missing skips it too.
The per-file record is bounded (past it, everything older is refused).
- An entry read while its drop was pending is a miss even when the
writer ends the sweep between the read and the check (a stale hit
found under load): the pending drops and the generation are taken
before the entry is read.
- Test: a reopened project serves its frame from disk with no source file
opened or decoded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: RAM frames keep the drop generation their render started at
Reload Footage empties the RAM preview, but an idle pass of
persist_missing may already hold a frame from before the reload. It
took the cache's drop generation when it ran, after the drop, so the old
pixels could be written back and, with the file's size and time
unchanged, served again after a restart.
Each RAM frame now keeps the disk cache its render started with and
that cache's drop generation then. persist_missing writes a frame only
to that cache, with that generation, and skips it once one of its files
was dropped since; a frame rendered without that cache is not written
from there.
Tests use tempfile directories (the layer drop test, the frame_files
folders under target/).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Doc comments for the functions this PR touches
* Disk cache: cap the free-space reserve at 10 GB, skip encodes the limit refuses
The reserve the cache leaves free on its disk was max(2 GB, 5% of the
disk) (#2551). On a 4 TB disk with 190 GB free that is 200 GB, so a
cache set to 20 GB had a limit of 0: every write was refused, the cache
never held anything, and only a log warning said so.
The reserve is now clamp(5% of the disk, 2 GB, 10 GB). It is there to
keep the cache from filling the disk, not to keep a share of a large
disk free: 10 GB leaves the system room to work on any disk, a small
disk still keeps 2 GB, and a 100 GB disk keeps 5 GB as before. After
Effects has only a maximum cache size and no reserve; a clamp keeps
the floor for small disks, where a fixed 10 GB would take most of the
space.
Writes the limit refuses cost no work: DiskCache::accepts_writes (one
atomic read) is checked before a frame is converted (put_disk_frame)
and before frames and layers are compressed (put_frame, put_frame_f16,
put_layer). The frame workers spent about 8 ms per frame and 14 ms per
layer on encodes that were then refused. persist_missing returns at
once at limit 0 instead of converting the RAM frames on every idle pass.
Settings > Disk shows the limit in effect in MB under Maximum Disk
Cache Size, with a note when free disk space lowers it
(settings.disk.cacheLimit).
* Disk cache: refuse writes below 64 MB of room, show this disk's reserve
Review follow-ups to the reserve fix:
- accepts_writes also refuses while free disk space leaves less than
64 MB of room (a limit the setting asks for is always used): a few
frames would fill it, and the rest would be compressed only to be
refused.
- While writes are refused the idle passes ask for no repaint, so the
UI keeps a frame coming every 5 s: the free space is read again and
the RAM frames are written once there is room.
- Settings > Disk names the space kept free on this disk (the reserve
the last reading applied; the rule from MIN/MAX_DISK_RESERVE when it
is unknown), and the "no room" note follows accepts_writes.
- The settings.disk.cacheLimit automation label is machine-readable
and the same in every language: limitMb, maxMb, reserveMb,
spaceLimited, writes.
- cargo fmt.
* Disk cache: follow 3D model sources in the comp's reach
The reach walk followed comp, footage and solid sources but not
LayerSource::Model. An expression reading a model layer's source
(thisComp.layer("Model").source.name) left the model item out of the
comp's content key, so renaming the model kept the key and the old
frames on disk were served. Every source item is followed now
(LayerSource::item), which also counts the model when no expression
reads it (Advanced 3D draws it).
The same omission is fixed in the RAM preview's content walk
(frames.rs) and in the layer key's walk of referenced layers
(cache/dependencies.rs).
* Disk cache: a render's drop generation travels with its reads; no disk entries for Expression Selectors
Drop generation per render: the layer cache recovered a buffer's drop
generation from the latest miss of its key, so a second render of the
key that started after File > Reload Footage lent its generation to a
render still running from before, and that render's buffer (the file as
it was) was written after the sweep. Now Renderer::recorded starts each
buffer's read log at the store's drop generation before anything is
read (ReadLog::starting_at); ReadFiles carries the earliest generation
through merges, so derived buffers (styles, the blend-space copy, the
flattened layer) and frames that use a buffer from memory carry it too.
LayerCache::insert keeps a buffer made of a file dropped since its
reads began neither on disk nor in memory; a list that doesn't say
counts as made before every drop. DiskCache::dropped_since takes the
list's own generation too. missed_at keeps only the miss time.
Expression Selectors: the layer key evaluates a text Expression
Selector's amount for the first character only, so a per-character
dependency such as textIndex == 1 ? 0 : footage("ref.png").width was
not in the key, and after the footage item's width changed a reopened
session reused the old layer entry. A text layer with an Expression
Selector now marks its reads unkeyed (ReadFiles::is_unkeyed), which
merges like the generation; such buffers stay in memory and are never
written to disk. Frame entries are unaffected: the comp's frame key
hashes what the expressions name. The equality and hash of ReadFiles
ignore both new fields.
* Disk cache: never serve a RAM layer buffer made before a drop of its files
A render that passed the drop check could sit in put_layer's encode
while Reload Footage cleared the layer cache and dropped the file, then
publish its old pixels to memory after the purge; get, and a fresh
render's insert, then served them. The disk-hit promotion went through
the same insert_mem.
Every way the cache hands out a RAM buffer (get, the kept-first path of
insert, an existing entry in insert_mem) now checks the entry's files
against the store's drops from their own generation (ReadFiles::since):
an entry made before a drop of one of its files is forgotten and the
lookup misses, so a fresh render's buffer replaces it. insert_mem also
re-checks a buffer just before publishing it.
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Animator Opacity stacked by multiplying, so once one animator set 0 %
no animator below it could raise it again. Each animator now blends the
opacity left by the ones above it toward its own value. A single Opacity
animator gives the same result as before.
Fixes#2838.
Text strokes were always drawn with round joins. The document gets a
Line Join (`lineJoin: miter|round|bevel` in layer.setText / newText),
Miter for new text as in After Effects, Round for documents saved before
it so their look is kept. The 2D and Advanced 3D (extruded) text strokes
use it, expressions' style copies carry it, and the Character panel has
Miter / Round / Bevel buttons under the stroke width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflict in crates/text/src/layout.rs (paragraph direction at the top of
paragraph()), against the closure-to-method-path cleanup (4e9fa51f): kept this
branch's direction resolved once from BidiInfo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With per-character 3D on, After Effects turns each character by Rx * Ry * Rz
(Z first), as it turns a 3D layer's X / Y / Z Rotation (case 931, AE 2026:
"H" at 400 px with animator X / Y / Z Rotation 40 / 30 / 20). EffectCraft
composed Rz * Ry * Rx, so the glyph faced another way: 23 of 5184 grid
points off (max 255), now 3 at the anti-aliased edge (mean 0.015/255). The
same order fix-orientation uses for layers; texts with one rotation axis
are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A text animator's Tracking Amount is in pixels in After Effects 2026, not in
1/1000 em like the Character panel's tracking: Amount 30 on every character
adds 30 px between neighbours (half before, half after each) at 80 px and at
40 px. And a Subtract range selector over characters the first selector
leaves out keeps them at 0 instead of selecting them negatively. With both,
the EXPORTER's t8 layer D (Tracking 30 on characters 2-4 by index, Subtract
over the last 20 %) puts every glyph where AE does (it ended 88 px short,
1553 vs 1641; now 1641).
The "Tracking In" text preset animates 40 -> 0 px (was 400 -> 0 thousandths
of an em, about the same at 100 px text); Lottie export writes a style run's
tracking (1/1000 em) as pixels for its tracking animator, which Lottie
players add in pixels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Units set to Index the selector already counts characters (words,
lines), but the timeline kept showing Start, End and Offset as
percentages ("3.0%"), so switching looked like it did nothing. They are
now shown without the % sign while Units is Index
(render::text::in_index_units).
Synthetic bold grows a glyph's outline in its own space, so a
non-uniform character Scale stretches it more along one axis. The patch
and layer bounds reserved it through mean_scale and could clip the
stretched side; they now reserve how far the bold reaches along x and y.
A run of solid fills grows its glyphs together in layer space by one
radius, which only matches when the bold stays round there: a bold glyph
whose matrix stretches or skews is no longer gathered into a run.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The layout marks a glyph synth_bold when Faux Bold is on, or when a bold
style is asked of a family without a bold face, but the renderer never
read it, so both drew as regular.
PlacedGlyph now carries the bold radius (0.03 em, which brings Inter
Regular's stems to Inter Bold's). A bold fill is the outline's coverage
merged with a round stroke twice that wide, and a bold glyph's stroke is
the band between the outline grown by radius ± half the stroke width, so
it follows the bolder shape. Runs of solid fills only merge glyphs of the
same bold radius, and the patch and layer bounds grow by it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
In After Effects, text animator Tracking Amount adds the value in absolute
pixels between neighbouring characters, independent of font size. EffectCraft
previously scaled tracking by 1/1000 em (matching static Character-panel
tracking), causing tracking reveals to have significantly reduced spread.
Apply Tracking Amount directly in pixels during glyph positioning layout,
update existing tracking tests to reflect pixel units, and add a regression
test verifying font-size independence.
Fixes#1798
- Footage sources: the cancellable wrapper (#784) forwards frame_with (#752 float curves)
and problem (#887); problem's default lives on the trait.
- Media: a called-off decode (#784) is not a footage problem (#887).
- Effect Controls rename (#953): Escape cancels (egui drops focus on Escape the same
frame), the Rename item is translated; regression test.
- i18n (#873): drop the /out-i18n/ ignore rule and the note about an uncommitted script.
- Tests: text range selector caps (#926) re-borrow the layer; the RAM preview test (#793)
sets the comp's own Resolution (#462).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cause: each glyph's fill was rasterised and composited on its own, so
where two glyphs share an edge (the crossbars of "ff") two half-covered
pixels composited to 0.75 coverage instead of 1: a thin light seam,
where After Effects draws the line as one outline.
Fix: consecutive fill passes of the same opaque colour, without Blur,
under Normal Inter-Character Blending are rasterised as one coverage
mask (the glyphs' outlines in layer space, wound the same way so
overlaps add up under NonZero). Characters of other colours, translucent
or blurred ones, strokes and the other blending modes are drawn one by
one as before.
Tests: text::tests::touching_glyphs_join_without_a_seam (two glyphs
sharing an edge mid-pixel: 0.75 before, 1.0 now; opposite windings and
overlaps stay filled; other colours and Multiply still composite one by
one).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The per-line tracking compensation in text_geom used only the animators'
Line Anchor, which defaults to 0% (left) when no animator has one, so
tracking on centred or right-aligned text pushed the line to the right
instead of spreading it around its alignment point.
Without a Line Anchor, a line now grows from where its own paragraph's
alignment pins it: 50% for centred, 100% for right-aligned (a justified
paragraph by its last line), read per paragraph rather than from the
document. The Line Anchor property still overrides it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`Renderer::mb_on` (render options × the comp's switch × the layer's switch as the precomp
layers above limit it) now decides everywhere:
- Mask motion blur checked only the comp's switch and the layer's own switch, so Render
Settings ▸ Motion Blur ▸ Off for All Layers and a precomp layer with motion blur off still
blurred masks; it now takes the gate (`masks::MaskBlur`) and the comp's Samples Per Frame
(four in Draft) instead of a fixed eight.
- Effects that read the shutter (`EffectEnv::shutter`) get it only when the layer is motion
blurred in this render.
- Advanced 3D layers follow the precomp layers' Motion Blur switches too.
- The layer cache key of a layer with masks or effects includes whether it is blurred and the
comp's shutter and samples, so a buffer blurred for the viewer is never reused by a render
with motion blur off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Text: vertical type turns Roman characters on their side (CJK stays
upright) unless Standard Vertical Roman Alignment is on; Tate-Chu-Yoko sets
selected characters horizontally in a one-em cell of the column (layer.setText
tateChuYoko / verticalRomanUpright, Character panel toggles). A Left-to-Right
paragraph is now forced LTR instead of auto-detected. The editing caret follows
animators and text on a path (render::text::caret_maps). Lottie export writes
per-character style runs as index-unit range animators.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shapes (SHP-2): Stroke Taper (pixels/percent start/end length, width, ease) and
Wave (amount, pixels/cycles, wavelength, phase) rendered as a variable-width
outline; Dash 2/Gap 2/Dash 3/Gap 3 (shape.dashes.add/remove, timeline +/-
buttons); radial gradient Highlight Length/Angle as a focal gradient.
Masks (MSK-1): mask feather points on the Mask Path (mask.featherPoint.*,
Mask Feather tool add/drag), per-point signed radius and tension, rendered
from the signed distance to the path; carried through vertex edits.
Motion blur (LYR-10): Adaptive Sample Limit comp setting; 2D layers take one
sample per pixel of shutter travel between Samples Per Frame and the limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Range selector complete (units, based on, modes, shapes, smoothness, ease
high/low, randomize), Wiggly and Expression selectors combined by mode;
all AE animator properties incl. line anchor, character offset/value,
skew axis, tracking type, fill/stroke HSB+opacity, blur; More Options
(anchor grouping, fill & stroke order, inter-character blending); Path
Options (text on a mask path); per-character 3D rendered as planes in
the 3D compositor; text animation commands and original presets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
