convert, run --save and run --export picked the format from the output
extension and fell back to native .deckcraft bytes for any extension
they didn't know, so out.odp, out.gif, out.svg and out.outline were
zips with exit status 0. They now fail before writing anything, with
the extension and the supported ones in the error.
Make the slide show behave like PowerPoint for interactive decks.
- Hit testing resolves the topmost visible shape under the pointer.
Non-interactive shapes block shapes beneath them; the hand cursor
shows only over interactive shapes.
- Click-triggered animations (interactive sequences) play on shape
click, repeat after their last step, and apply in click order so
cycling "score ring" shapes work.
- Each slide keeps its own progress: returning to a slide through a
link or Back restores hidden shapes and animation state.
- A shape with a link and an animation follows the link immediately;
its animation clock only runs while the slide is shown and resumes
with the remaining time on return.
- With advance-on-click off, background clicks still play animation
steps but never change slide.
- A click on a playing step completes it at once.
Docs (gaps, animation and slide show parity, roadmap) are updated.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
shape.pointType makes a vertex smooth (handles in line and equal),
straight (in line) or corner (independent), turning its segments into
curves so it has handles. shape.moveHandle drags a control handle; the
other one follows as the point's type says (given, or read from the
handles). shape.points also reports each vertex's type.
Canvas: clicking a vertex shows its handles, which drag (one undo step
per drag) and follow the type chosen for it. Right-click a vertex for
Smooth / Straight / Corner Point and Delete Point, or anywhere for Exit
Edit Points; a shape's context menu gets Edit Points. The selection box
is hidden while points are edited.
Co-authored-by: Cursor <cursoragent@cursor.com>
New cmd::points with shape.editPoints (enter/leave; a preset becomes a
freeform in shape-local points), shape.points (vertices in slide points),
shape.movePoint, shape.addPoint (splits a line, quadratic or cubic
segment) and shape.deletePoint. After each change the box is fitted
around the outline and kept in place on the slide, rotation and flips
included. Closing edges are made explicit so they take points too.
On the canvas the edited shape shows its vertices as handles: drag one
(one undo step per drag), Cmd/Ctrl-click a vertex to delete it or the
outline to add one; Escape, Enter or a click elsewhere leaves Edit
Points. Shape Format ▸ Edit Shape gets an Edit Points item.
Not yet: smooth/straight/corner point types and Bézier control handles.
Co-authored-by: Cursor <cursoragent@cursor.com>
ui_soak_tests.rs drives the app through the egui test harness with seeded
random clicks, drags, keys (plain, Ctrl, Shift), typing and scrolling over the
sample deck. Every ten actions it checks that every document validates, the
selection is in range, undo, journal, thumbnail and texture caches stay
bounded, and no command or render panic was caught; at the end, that input
really reached the editor and the mean frame stays under 250 ms. Two seeds x
150 actions run in CI; DECKCRAFT_UI_SOAK_STEPS/SEED run it long.
Panics swallowed by the guards were invisible to tests: Session now counts
them (panics_caught) and deckcraft_render::panics_caught() counts render
panics drawn as blank. Textures::thumb_count exposes the thumbnail cache size.
Co-authored-by: Cursor <cursoragent@cursor.com>
Transition sounds were read from and written to .pptx but could not be
set and never played. Transitions › Timing gets a Sound box ([No Sound]
or Other Sound…), backed by a new transition.sound command that embeds
an audio file on the selected slides (or removes it with none). In the
slide show the sound plays as its slide comes in and, as in PowerPoint,
keeps playing into the next slide unless that slide has a sound of its
own. Built-in sounds, Stop Previous Sound and Loop Until Next Sound are
still missing; the parity docs say so.
Co-authored-by: Cursor <cursoragent@cursor.com>
Shape Format ▸ Text Effects lists the 40 prstTxWarp presets and
No Transform. format.textWarp sets or clears that warp on the
selected text, with optional adjust values.
Co-authored-by: Cursor <cursoragent@cursor.com>
There was no way to make text see-through: the only Transparency
slider was the shape fill's. The new format.textTransparency command
keeps the text's colour and sets its alpha (replacing any it had, and
dropping it at 0). A run without its own colour takes the colour it
shows now, so inherited placeholder or theme colours stay as they are.
Gradient text gets the alpha on every stop. The Format Shape pane's
Text Options page gains a Text Fill section (colour and Transparency),
and the Shape Format › Text Fill dropdown has the same slider.
Co-authored-by: Cursor <cursoragent@cursor.com>
shape.effects gains shadowProps / glowProps / reflectionProps that adjust
the current effect (or add a default one): shadow colour, transparency,
blur, angle and distance; glow colour, transparency and size; reflection
transparency, size, distance and blur. Values are clamped, non-finite ones
ignored. The Effects page of the Format Shape pane exposes them as sliders
and colour pickers.
Co-authored-by: Cursor <cursoragent@cursor.com>
soak_tests.rs drives every non-file command with plausible and hostile
parameters over a ~100-slide deck, checking after each step that the
document validates, the selection is in range, the undo stack is bounded,
undo then redo restores the exact document, and every 100 steps that the
deck saves and reopens as .deckcraft and .pptx. Four seeds x 400 steps run
in CI (under a second); DECKCRAFT_SOAK_STEPS/SEED run it long.
The long soak found that a chart a few points wide panicked in f64::clamp
(label gutter min above max), and the render guard then blanked the whole
slide. chart.rs now uses a non-panicking clamp_soft for the gutters and the
zero line; a render test draws tiny charts next to a shape without the
guard.
Co-authored-by: Cursor <cursoragent@cursor.com>
The Format Shape pane's Line page had only colour, width and dash. It now
has PowerPoint's compound type, cap type, join type, begin/end arrow type
and begin/end arrow size drop-downs, and the Size page has Lock aspect
ratio for the width and height fields. shape.line gains compound,
headSize and tailSize, and changing an arrow's kind keeps its size.
Co-authored-by: Cursor <cursoragent@cursor.com>
The Print page always laid notes pages and handouts out on portrait US
Letter. It now offers Letter, A4, Legal and A3 in portrait or landscape,
as PowerPoint's Print settings do, and the preview shows the chosen
page. file.export, app.print and the MCP export tool take the same
`paper` and `orientation` params; unknown values are an error. A notes
page keeps its slide within the top half of the page, so landscape
paper still leaves room for the notes. Full-page slides still print on
slide-shaped pages.
Co-authored-by: Cursor <cursoragent@cursor.com>
The font menu lists every family the scan of the system font folders finds,
but on Linux the scan only looked in /usr/share/fonts, /usr/local/share/fonts,
~/.fonts and ~/.local/share/fonts. Fonts under XDG data dirs, in folders
fontconfig is configured with (NixOS, Guix, custom setups) and, inside
Flatpak, the host's fonts never showed.
- system_font_dirs adds $XDG_DATA_HOME/fonts and each $XDG_DATA_DIRS/fonts,
Flatpak's /run/host/{fonts,local-fonts,user-fonts}, and the <dir> entries
of /etc/fonts/fonts.conf, local.conf and conf.d; duplicates are dropped.
- font.add {data} adds a font from its bytes for the session; font.rescan
catalogs the installed fonts again, and the font menu has a
"Rescan Installed Fonts" item for fonts installed while DeckCraft runs.
Co-authored-by: Cursor <cursoragent@cursor.com>
Design Ideas showed the current slide once per built-in theme, and picking
one ran design.theme on the whole presentation; with a large picture every
idea looked the same. The pane also re-rendered eight slides every frame.
- New commands design.ideas (query) and design.applyIdea {id, slide?}
(cmd/ideas.rs). A slide with a picture gets full-bleed with the title on a
band, picture left or right with the text beside it, and a framed picture;
a text slide gets a title column, a centred title and a title at the foot.
An idea moves the slide's own shapes, crops the picture to cover its new
box, sends it to the back, and changes only that slide (one undo step).
- The pane shows the layout ideas first, then the themes under a "whole
presentation" heading, and caches the thumbnails until the deck revision,
slide or pane width changes.
Co-authored-by: Cursor <cursoragent@cursor.com>
Document uids started at 1 in every process, so two instances sharing
the recovery folder overwrote and deleted each other's entries, and
file.recovery.open deleted each entry as soon as it was loaded, leaving
nothing if the app died before the next checkpoint.
- Uids are a random per-process base plus a counter (below 2^53).
- Each instance holds a lock on owner-<id>.lock in the folder; entries
record their owner, and recovery open skips a running owner's entries
and removes stale lock files.
- Opening an entry no longer deletes it: the recovered presentation keeps
the entry's uid and takes ownership, so the snapshot stays until the
next recovery save replaces it or a save/close removes it.
- Entry files and metadata are both written via temp file + rename.
Co-authored-by: Cursor <cursoragent@cursor.com>
Paste added clashing media under a fresh id but left the pasted shapes on the
old id, reid did not touch connector ends despite its comment, pasted slides
kept animations on the original shape ids, and slide.duplicate remapped
animation targets but not triggers.
- reid returns the old-to-new shape map; connector ends on a copied shape
follow the copy, ends on a shape outside the copied set are detached.
- remap_animations points targets and triggers at the copies (an animation
whose target wasn't copied is dropped, an uncopied trigger cleared); used
by slide paste and slide.duplicate.
- bring_media returns the media ids it had to change and paste rewrites the
shapes (and a pasted slide's picture background) to use them; slide copy
now also carries a picture background's media.
Co-authored-by: Cursor <cursoragent@cursor.com>
Brandon Thomas