Make the slide show behave like PowerPoint for interactive decks.
- Hit testing resolves the topmost visible shape under the pointer.
Non-interactive shapes block shapes beneath them; the hand cursor
shows only over interactive shapes.
- Click-triggered animations (interactive sequences) play on shape
click, repeat after their last step, and apply in click order so
cycling "score ring" shapes work.
- Each slide keeps its own progress: returning to a slide through a
link or Back restores hidden shapes and animation state.
- A shape with a link and an animation follows the link immediately;
its animation clock only runs while the slide is shown and resumes
with the remaining time on return.
- With advance-on-click off, background clicks still play animation
steps but never change slide.
- A click on a playing step completes it at once.
Docs (gaps, animation and slide show parity, roadmap) are updated.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The Bullets and Numbering menus only offered a fixed list of styles.
"Bullets and Numbering…" at the foot of both menus opens PowerPoint's
dialog: Bulleted and Numbered tabs with their styles, a custom bullet
character, Start at, Size (% of text, 25-400) and Color (automatic,
text or an accent), and None.
format.numbering now takes color and size like format.bullets, and
both clamp the size to PowerPoint's 25-400 %.
Co-authored-by: Cursor <cursoragent@cursor.com>
Adds Basic (stars, heart, crescent moon, teardrop, ...), Lines & Curves
(zigzag, waves, S curves, spirals, bounces, ...) and Special (figure 8,
bean, peanut, neutron, ...) motion paths with PowerPoint preset ids, so
they appear in the Motion Paths gallery, play back, and round-trip
through PPTX.
Co-authored-by: Cursor <cursoragent@cursor.com>
The Picture Format > Remove Background button was a disabled
placeholder. picture.removeBackground now flood-fills from every edge
pixel through similar colours: each step must be close to the pixel
before it (so gradients and soft shadows follow) and to the edge colour
it started from (so it can't leak into the subject). That region turns
transparent with a one-pixel soft edge, and the picture points at a new
PNG; undo brings the original back. Tolerance 0-100 (default 20); the
ribbon offers normal, looser and tighter. Pictures whose edges are all
subject are left alone, and pictures over 16 megapixels are refused.
Co-authored-by: Cursor <cursoragent@cursor.com>
Open, save and reopen decks we author, and compare package parts and
text. The check showed a notes master's header and footer were replaced
by an empty notes master on save.
Co-authored-by: Cursor <cursoragent@cursor.com>
Follow-up to the transition sound picker. The Sound box now lists
[Stop Previous Sound] and six built-in sounds (Chime, Click, Camera,
Whoosh, Drum Roll, Laser) that are synthesised as small WAVs when
chosen, so no sound files ship with the app; the same built-in sound is
embedded once however many slides use it. Loop Until Next Sound repeats
a sound in the show until another slide's sound or Stop Previous Sound.
PPTX reads and writes p:stSnd loop="1" and p:endSnd, keeps the sound's
file name in p:snd/@name, and setting a slide's transition to None no
longer drops its sound.
Co-authored-by: Cursor <cursoragent@cursor.com>
shape.pointType makes a vertex smooth (handles in line and equal),
straight (in line) or corner (independent), turning its segments into
curves so it has handles. shape.moveHandle drags a control handle; the
other one follows as the point's type says (given, or read from the
handles). shape.points also reports each vertex's type.
Canvas: clicking a vertex shows its handles, which drag (one undo step
per drag) and follow the type chosen for it. Right-click a vertex for
Smooth / Straight / Corner Point and Delete Point, or anywhere for Exit
Edit Points; a shape's context menu gets Edit Points. The selection box
is hidden while points are edited.
Co-authored-by: Cursor <cursoragent@cursor.com>
New cmd::points with shape.editPoints (enter/leave; a preset becomes a
freeform in shape-local points), shape.points (vertices in slide points),
shape.movePoint, shape.addPoint (splits a line, quadratic or cubic
segment) and shape.deletePoint. After each change the box is fitted
around the outline and kept in place on the slide, rotation and flips
included. Closing edges are made explicit so they take points too.
On the canvas the edited shape shows its vertices as handles: drag one
(one undo step per drag), Cmd/Ctrl-click a vertex to delete it or the
outline to add one; Escape, Enter or a click elsewhere leaves Edit
Points. Shape Format ▸ Edit Shape gets an Edit Points item.
Not yet: smooth/straight/corner point types and Bézier control handles.
Co-authored-by: Cursor <cursoragent@cursor.com>
ui_soak_tests.rs drives the app through the egui test harness with seeded
random clicks, drags, keys (plain, Ctrl, Shift), typing and scrolling over the
sample deck. Every ten actions it checks that every document validates, the
selection is in range, undo, journal, thumbnail and texture caches stay
bounded, and no command or render panic was caught; at the end, that input
really reached the editor and the mean frame stays under 250 ms. Two seeds x
150 actions run in CI; DECKCRAFT_UI_SOAK_STEPS/SEED run it long.
Panics swallowed by the guards were invisible to tests: Session now counts
them (panics_caught) and deckcraft_render::panics_caught() counts render
panics drawn as blank. Textures::thumb_count exposes the thumbnail cache size.
Co-authored-by: Cursor <cursoragent@cursor.com>
Transition sounds were read from and written to .pptx but could not be
set and never played. Transitions › Timing gets a Sound box ([No Sound]
or Other Sound…), backed by a new transition.sound command that embeds
an audio file on the selected slides (or removes it with none). In the
slide show the sound plays as its slide comes in and, as in PowerPoint,
keeps playing into the next slide unless that slide has a sound of its
own. Built-in sounds, Stop Previous Sound and Loop Until Next Sound are
still missing; the parity docs say so.
Co-authored-by: Cursor <cursoragent@cursor.com>
Shape Format ▸ Text Effects lists the 40 prstTxWarp presets and
No Transform. format.textWarp sets or clears that warp on the
selected text, with optional adjust values.
Co-authored-by: Cursor <cursoragent@cursor.com>
shape.effects gains shadowProps / glowProps / reflectionProps that adjust
the current effect (or add a default one): shadow colour, transparency,
blur, angle and distance; glow colour, transparency and size; reflection
transparency, size, distance and blur. Values are clamped, non-finite ones
ignored. The Effects page of the Format Shape pane exposes them as sliders
and colour pickers.
Co-authored-by: Cursor <cursoragent@cursor.com>
soak_tests.rs drives every non-file command with plausible and hostile
parameters over a ~100-slide deck, checking after each step that the
document validates, the selection is in range, the undo stack is bounded,
undo then redo restores the exact document, and every 100 steps that the
deck saves and reopens as .deckcraft and .pptx. Four seeds x 400 steps run
in CI (under a second); DECKCRAFT_SOAK_STEPS/SEED run it long.
The long soak found that a chart a few points wide panicked in f64::clamp
(label gutter min above max), and the render guard then blanked the whole
slide. chart.rs now uses a non-panicking clamp_soft for the gutters and the
zero line; a render test draws tiny charts next to a shape without the
guard.
Co-authored-by: Cursor <cursoragent@cursor.com>
The Format Shape pane's Line page had only colour, width and dash. It now
has PowerPoint's compound type, cap type, join type, begin/end arrow type
and begin/end arrow size drop-downs, and the Size page has Lock aspect
ratio for the width and height fields. shape.line gains compound,
headSize and tailSize, and changing an arrow's kind keeps its size.
Co-authored-by: Cursor <cursoragent@cursor.com>
A deck that embeds a TrueType or OpenType face, including one wrapped as Embedded OpenType, now draws with that face and saves it back. MicroType Express subsets stay in the file and still draw in a stand-in.
Co-authored-by: Cursor <cursoragent@cursor.com>
INTERSECTCLIPRECT, EXCLUDECLIPRECT and EXTSELECTCLIPRGN limit what later records paint, including a region made of several rectangles. A rotated map stores the bounds of the clip rectangle.
Co-authored-by: Cursor <cursoragent@cursor.com>
The writer emitted the legacy comment part only: replies were flattened
into sibling comments, the resolved flag was dropped. Modern PowerPoint
decks carry a second, threaded part (p188) as well - and DeckCraft read
both, importing every comment twice.
Export now writes the modern threaded part (p188:cmLst, with the slide's
commentRel anchor ext and the modern authors part) next to the flattened
legacy part, the same pair of parts PowerPoint itself writes: older
readers keep the legacy view, PowerPoint 2021+ and DeckCraft read
threads, replies and resolved state. The reader prefers the modern part
when both are present and scales modern positions as EMU instead of
legacy 1/8 pt, so real PowerPoint decks stop double-importing their
comments and keep their marker positions.
Comment ids are deterministic GUIDs from the existing tables::guid, so
exports stay reproducible without a new dependency.
Known limitation for a follow-up: comments anchor with
p188:unknownAnchor (schema-valid) rather than a slide moniker, which
needs part identity the model does not have yet.
Tests: threads plus resolved state round-trip on top-level comments and
replies, both parts and the anchor-rel wiring asserted in the raw
package, part numbering with comment-free slides skipped, legacy-only
and modern-only packages import each with their own position units, and
XML-special characters survive the trip.
Progress log entry for the wild-case rendering fixes; "Bevel and 3-D
rotation" moves from missing to partial (approximate bevels, cameras and
face lighting; no extrusion, rigs or 3-D pane); gap estimate narrowed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every transition and Effect Option was built in PowerPoint (COM), exported as
video and compared frame by frame with DeckCraft at the same progress
(mean abs diff over 150 variants 35.7 -> 15.0, 0-255).
- anim: transition_frame(kind, option, t, aspect) with measured curves
(smoothstep fades, ease-in-out moves, Cover/Uncover/Pan curves), directions
and option meanings, soft edges as per-corner opacity, 3-D effects as
perspective-projected cards, Dynamic Content moving slide contents over
cross-fading backgrounds (Source::OldBack/NewBack/OldContent/NewContent);
layer_mesh subdivides perspective quads so textures stay straight.
- New options: Page Curl Single, Glitter Hexagons, Shred In/Out, Zoom and
Rotate; PowerPoint-style Effect Options labels.
- render: composite_transition (CPU twin of the show), render_slide_part,
render_transition; deckcraft-cli render-transition FILE --slide N --t T.
- show: per-vertex opacity meshes, slide parts rendered once per transition.
- pptx: PowerPoint's elements and defaults (p:strips diagonal wipes, p14:warp
and p:newsflash for Zoom, p:zoom for Shape In/Out, glitter pattern, shred
rectangle/dir, prstTrans invX per preset, pageCurlSingle, defaults for
randomBar/doors/window/pan/zoom); PowerPoint reopens DeckCraft's files with
the same effects.
- Tests: measured curves, probes of which slide shows where at t, option
coverage, per-frame triangle budget, PowerPoint XML and defaults round trip.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- ui-parity.md: title bar row; status line and history.
- ROADMAP.md: progress log line. Quick Access toolbar / title bar commands stays P (no
customization); no gaps.md entry covered this.
- ui-parity.md: context menu row; status line and history.
- ROADMAP.md: progress log line. No checklist row changes score; no gaps.md entry covered this.
A right click on an unselected shape opened the slide's context menu
(Layout, Reset Slide...) because only the primary button reached the
pointer tool; the shape had to be left-clicked first. The right-button
press now goes through Session::pointer as PointerKind::ContextClick
(`contextclick` on the control channel and MCP) and selects like
PowerPoint before the menu opens: an unselected shape is selected alone
(a text box or placeholder is not put into text editing, nothing is
dragged), a selected shape keeps the selection, multiple selection
included, and empty slide clears it. In the box whose text is being
edited, the caret and text selection stay, and the context menu offers
text items (Paragraph, Bullets, Numbering, Link) next to Cut, Copy and
Paste, which act on the selected text.
Brandon Thomas