skylar taylor-barrick 4ab8c384b3 #618: test that OFFSET takes a clicked distance and picks its source under grid snap ...

OFFSET only accepted a typed distance, and with grid snap on a click meant to pick the source object was moved to the nearest grid point. The engine test clicks two points for the distance and checks the guide, the distance and the resulting offset; the canvas test does the same through grid-snapped clicks and then picks the source line. Without the fix the engine test stays at the distance prompt and the canvas test never picks the line.

2026-10-22 16:34:32 -06:00

..

aliases.rs

Support files: DWT templates for NEW/QNEW, SAVEAS .dwt, user alias files (fixes #552) (#562)

2026-10-11 13:12:32 -04:00

angle_prompts.rs

Angle prompts read AUNITS, ANGBASE and ANGDIR (fixes #353) (#354)

2026-10-10 17:32:13 -04:00

angle_settings.rs

Typed angles follow ANGBASE, ANGDIR and AUNITS (fixes #326) (#328)

2026-10-10 16:55:07 -04:00

annotate_options.rs

MLEADER: spline and no-leader types, block content (fixes #408) (#419)

2026-10-10 19:20:02 -04:00

annotative.rs

MTEXT: annotative scaling and SCALE on multileader text scale the text width and columns too (fixes #708, fixes #709) (#743)

2026-10-13 05:10:24 -04:00

arc_ctrl_direction.rs

fix(arc): hold Ctrl to switch the arc direction (#1422)

2026-10-19 02:32:08 -04:00

array_commands.rs

Associative arrays: ASsociative, Levels and polar ROWs (part of #448) (#455)

2026-10-11 11:28:48 -04:00

assoc_array.rs

ARRAYEDIT and ARRAYCLOSE for associative arrays (fixes #448) (#460)

2026-10-11 11:36:02 -04:00

attdisp_attsync.rs

ATTDISP and ATTSYNC; the display follows ATTMODE (fixes #275, #276) (#282)

2026-10-10 16:55:27 -04:00

attedit_prompts.rs

Attributes keep their own layer, colour, linetype and lineweight (fixes #358) (#359)

2026-10-10 18:10:40 -04:00

attrib_modes.rs

Attributes keep Verify, Preset and Lock position (stacked on #854) (#876)

2026-10-13 05:56:05 -04:00

attrib_props.rs

Attributes keep their own layer, colour, linetype and lineweight (fixes #358) (#359)

2026-10-10 18:10:40 -04:00

attribute_tools.rs

BATTMAN: edit, remove and reorder attribute definitions; references follow (part of #433) (#444)

2026-10-11 11:23:32 -04:00

audit.rs

feat(engine): support AUDITCTL system variable and .adt log generation (gaps F4) (#1504)

2026-10-19 02:53:04 -04:00

autosave.rs

Autosave: a write that failed is tried again without another change (fixes #717) (#774)

2026-10-13 04:35:02 -04:00

block_editor.rs

Block Editor on the current drawing; a drawing with authoring elements offers it (stacked on #833) (#885)

2026-10-13 06:02:48 -04:00

block_keep.rs

BLOCK: a keep value other than convert, retain or delete is an error (fixes #935) (#1160)

2026-10-19 02:30:15 -04:00

block_redefine.rs

-BLOCK erases the selection and asks before redefining (fixes #307) (#310)

2026-10-10 16:11:19 -04:00

break_closed_polyline.rs

BREAK opens a closed polyline instead of refusing it (fixes #1173) (#1191)

2026-10-19 02:30:41 -04:00

break_join_locked_layers.rs

BREAK, BREAKATPOINT and JOIN: leave objects on locked layers alone (fixes #727) (#730)

2026-10-13 05:03:16 -04:00

break_keeps_z.rs

Keep Z and elevation of the pieces left by BREAK (#1270)

2026-10-19 02:55:28 -04:00

burst.rs

BURST: explode block references with their attribute values as text (#1345)

2026-10-19 02:56:04 -04:00

clipboard.rs

Copy and paste between drawings; PASTEORIG, PASTEBLOCK; right-click menu (part of #325) (#355)

2026-10-10 17:32:34 -04:00

compare.rs

feat(file): COMPARE drawings with overlay and change areas (fixes #563) (#572)

2026-10-11 13:25:17 -04:00

constraint_geometry.rs

Constraints: DOF report, G2 Smooth, ellipse/spline/block geometry (part of #546) (#550)

2026-10-11 12:47:53 -04:00

constraint_infer.rs

CONSTRAINTINFER test: make the array of copies explicitly non-associative (#621)

2026-10-11 12:49:35 -04:00

count.rs

feat(inquiry): COUNT across layouts and nested blocks, COUNTLIST, COUNTTABLE (part of #563) (#565)

2026-10-11 13:13:18 -04:00

dash_block.rs

-BLOCK erases the selection and asks before redefining (fixes #307) (#310)

2026-10-10 16:11:19 -04:00

data_extraction.rs

DATAEXTRACTION and EATTEXT: block and attribute data to rows, CSV and a table (fixes #433) (#447)

2026-10-11 11:24:14 -04:00

dim_baseline_spacing.rs

DIMBASELINE spacing follows DIM* overrides and DIMSCALE 0 (fixes #364) (#366)

2026-10-10 18:08:50 -04:00

dim_chain.rs

DIMCONTINUE/DIMBASELINE: one snap index per chain, cap the points (#279) (#281)

2026-10-10 15:34:07 -04:00

dim_commands.rs

Dimension edits: DIMEDIT Oblique/New/Rotate/Home, DIMJOGGED, DIMJOGLINE, DIMBREAK, DIMINSPECT (part of #507) (#522)

2026-10-11 12:10:38 -04:00

dim_explode_text.rs

Exploded dimension text and DXF dimension blocks match the drawn text (fixes #367) (#369)

2026-10-10 18:09:15 -04:00

dim_properties.rs

Properties: a dimension's text height, arrow size, overall scale and precision (#1259) (#1473)

2026-10-19 02:52:59 -04:00

dim_radial_inside.rs

DIMRADIUS/DIMDIAMETER: a location outside the circle puts the text at that point (fixes #1170) (#1189)

2026-10-19 02:30:31 -04:00

dim_radial_outside.rs

DIMRADIUS/DIMDIAMETER: a location outside the circle puts the text at that point (fixes #1170) (#1189)

2026-10-19 02:30:31 -04:00

dim_vars.rs

Dimension styles: fit, text movement, suppressed halves, fixed extension lines, linetypes and lineweights and more DIM variables (part of #507) (#514)

2026-10-11 11:47:57 -04:00

dimtedit_prompts.rs

Align Text > Angle asks for the angle instead of failing with a missing-parameter error (#478) (#582)

2026-10-11 14:01:51 -04:00

drafting_spacing.rs

Zoom Window: the opposite corner ignores ortho, so the window stays a rectangle (fixes #787) (#790)

2026-10-13 04:36:46 -04:00

draw_prompts.rs

POLYGON: a typed radius of zero or less, or a radius point on the centre, is refused and asked again (fixes #720) (#735)

2026-10-13 05:05:37 -04:00

drawing_recovery_command.rs

Autosave (SAVETIME, SAVEFILEPATH) and Drawing Recovery after a crash (fixes #406) (#416)

2026-10-11 11:18:49 -04:00

draworder.rs

Draw order: DRAWORDER Above/Under objects, TEXTTOFRONT, HATCHTOBACK, SORTENTSTABLE read (part of #439) (#446)

2026-10-11 11:23:59 -04:00

dyn_input.rs

Dynamic Input options menu (DYNPROMPT), second-value lock; INS on ATTDEF/MLEADER, GCEN on closed splines (part of #519) (#523)

2026-10-11 12:10:52 -04:00

dynamic_block_data.rs

Dynamic block references: change the visibility state (stacked on #853) (#860)

2026-10-13 05:44:18 -04:00

dynamic_grips.rs

Dynamic blocks: a grip drag previews the reference in its own colours (#1124)

2026-10-19 02:53:50 -04:00

fillet_chamfer.rs

FILLET/CHAMFER: Trim, Multiple, Undo; CHAMFER Angle, mEthod, Polyline (fixes #248) (#251)

2026-10-10 16:56:01 -04:00

fix_holds_grips.rs

A fixed point stays put when its grip is dragged: Fix locks the position it had before the edit (part of #1134) (#1139)

2026-10-19 02:29:59 -04:00

followups_626.rs

Zoom Window: the opposite corner ignores ortho, so the window stays a rectangle (fixes #787) (#790)

2026-10-13 04:36:46 -04:00

grip_dim_input.rs

Grip dimensional input: length, angle and radius fields while stretching a grip, DYNDIVIS/DYNDIGRIP (part of #519, stacked on #440) (#527)

2026-10-11 12:11:22 -04:00

grip_options.rs

Grips: multifunctional grip menus for polylines, lines and arcs (fixes #425) (#440)

2026-10-11 11:23:18 -04:00

grip_selection.rs

Grip edits act on the whole selection (fixes #320) (#322)

2026-10-10 16:54:48 -04:00

group_selection.rs

Groups: PICKSTYLE group selection, Ctrl+Shift+A and -GROUP options (fixes #417) (#424)

2026-10-11 11:19:04 -04:00

groups.rs

Groups: GROUP, UNGROUP and GROUPEDIT commands; erased members leave their groups (part of #417) (#422)

2026-10-10 19:20:06 -04:00

hatch_assoc.rs

Hatch: associative hatches follow their boundary objects; DXF 97/330 source objects (part of #451) (#454)

2026-10-11 11:28:33 -04:00

hatch_dialog_helpers.rs

Hatch and Gradient dialog (create and edit) (#753)

2026-10-13 04:34:09 -04:00

hatch_numeric_validation.rs

HATCHEDIT: refuse an explicit bad scale or angle before editing anything (#724) (#777)

2026-10-13 05:37:45 -04:00

hatch_options.rs

Add HATCHEDIT boundary add and remove (#1156)

2026-10-19 02:54:28 -04:00

helix.rs

HELIX: helix entity drawn as a spline (part of #510) (#521)

2026-10-11 12:10:24 -04:00

inquiry_keywords.rs

AREA: an ellipse's perimeter is its exact length, not a closed-form estimate (#1471)

2026-10-19 02:57:04 -04:00

inquiry_z.rs

ID, DIST and LIST report Z (#1509)

2026-10-19 02:33:10 -04:00

insert_file.rs

INSERT with explode records one undo step (#475) (#585)

2026-10-11 14:02:21 -04:00

insert_prompts.rs

-INSERT asks for X and Y scale; Basepoint/Scale/Rotate take effect (fixes #245) (#249)

2026-10-10 16:12:09 -04:00

isometric.rs

Zoom Window: the opposite corner ignores ortho, so the window stays a rectangle (fixes #787) (#790)

2026-10-13 04:36:46 -04:00

join_close.rs

JOIN with a single arc or elliptical arc offers cLose: the arc becomes its circle, the elliptical arc its full ellipse (fixes #1175) (#1197)

2026-10-19 02:54:39 -04:00

json_param_validation.rs

JSON draw/annotation commands refuse invalid sizes and coincident points (fixes #343) (#344)

2026-10-10 17:32:01 -04:00

layer_cmdline.rs

-LAYER: command-line option loop for layers (fixes #254) (#260)

2026-10-10 16:55:44 -04:00

layer_merge_delete.rs

layer.delete: clear the deleted layer from viewport freeze and colour overrides (#474) (#586)

2026-10-11 14:02:36 -04:00

layoff_repeat.rs

Layer Off: stay active until Enter or Esc (#1418) (#1426)

2026-10-19 02:32:14 -04:00

layout_prompts.rs

LAYOUT / -LAYOUT: option prompts at the command line (fixes #378) (#380)

2026-10-10 18:10:30 -04:00

lin_pat_files.rs

Support files: user .lin linetypes and .pat hatch patterns (part of #552) (#557)

2026-10-11 13:12:17 -04:00

lisp_corpus.rs

AutoLISP: load and run .lsp routines (fixes #758) (#855)

2026-10-13 05:33:57 -04:00

malformed_handles.rs

JSON handles: reject a malformed handle instead of using the selection (fixes #330) (#331)

2026-10-10 16:54:33 -04:00

matchprop.rs

MATCHPROP: source/destination picker and Settings (part of #439) (#449)

2026-10-11 11:27:48 -04:00

measure_distance_snapping.rs

Fix Measure Distance snapping through layout viewports (#616)

2026-10-11 13:39:39 -04:00

metric_linetypes.rs

Metric drawings load library linetypes in millimetres (fixes #294) (#299)

2026-10-10 16:11:02 -04:00

mleader_content.rs

Multileader sizes no longer multiplied by DIMSCALE (#1648)

2026-10-19 22:27:34 +02:00

mleader_remember.rs

MLEADER remembers the placement order and Options (fixes #362) (#365)

2026-10-10 18:09:20 -04:00

mline.rs

MLEDIT Merged Tee: the first multiline's inner elements run on to the second's (#1375)

2026-10-19 02:56:16 -04:00

mocoro.rs

MOCORO: move, copy, rotate and scale a selection from one base point until eXit (#1388)

2026-10-19 02:56:40 -04:00

modify_curves.rs

JOIN: an elliptical arc named twice is one object, so the joined result stays (fixes #725) (#739)

2026-10-13 05:07:02 -04:00

mtext_columns.rs

MTEXT: paragraph indents and tab stops are in drawing units (#895)

2026-10-13 05:13:16 -04:00

mtext_options.rs

feat(text): MTEXT paragraph formatting (indents, tabs, lists) and columns (#547)

2026-10-11 12:47:12 -04:00

multiline_attributes.rs

Attributes keep Verify, Preset and Lock position (stacked on #854) (#876)

2026-10-13 05:56:05 -04:00

named_views.rs

Named views (VIEW), Zoom Realtime and Dynamic, ZOOMFACTOR (part of #463) (#503)

2026-10-11 11:42:56 -04:00

new_open_end_command.rs

Engine: NEW and OPEN end a command left running in the previous drawing (fixes #715) (#780)

2026-10-13 04:35:26 -04:00

non_finite_edits.rs

Refuse edits whose result has infinite or undefined coordinates (fixes #338) (#339)

2026-10-10 16:54:53 -04:00

offset_closed_spline.rs

OFFSET keeps a closed spline closed (fixes #303) (#305)

2026-10-10 16:11:13 -04:00

offset_ellipse_side.rs

OFFSET: full ellipse copy goes to the side of the picked point (#501) (#591)

2026-10-11 14:03:24 -04:00

offset_move.rs

#618: test that OFFSET takes a clicked distance and picks its source under grid snap

2026-10-22 16:34:32 -06:00

open_svg.rs

feat: SVG import — read SVG and SVGZ into native entities (#636)

2026-10-11 20:11:22 -04:00

options_profile.rs

Selection like AutoCAD: colour highlight and the Options Selection tab (#808)

2026-10-13 06:09:39 -04:00

overkill.rs

OVERKILL: tolerance, ignored properties, overlapping and end-to-end lines and arcs, polyline segments (fixes #439) (#452)

2026-10-11 11:28:18 -04:00

parallel_display_list.rs

Build the screen's model-space display list on all cores; read-write locks for glyph caches (#654)

2026-10-12 03:21:04 -04:00

pedit_splinedit.rs

feat(modify): SPLINEDIT Join, Edit vertex Add and Elevate order (#559)

2026-10-11 14:28:41 -04:00

pick_text.rs

Pick dimensions and multileaders anywhere on their text (#807)

2026-10-13 04:37:16 -04:00

pickdrag.rs

feat(options): save a two-click selection window preference (#1032)

2026-10-19 02:28:41 -04:00

pline_arc_xline_options.rs

PLINE arc options and Length, XLINE polyline segments (fixes #397) (#407)

2026-10-10 18:44:08 -04:00

plot_sheets.rs

PDF export: layers as PDF layers (OCG), several sheets per file, hyperlinks (part of #560) (#567)

2026-10-11 13:23:59 -04:00

plot_styles.rs

Plot styles: named styles (STB), PLOTSTYLE, STYLESMANAGER and table files (part of #410) (#418)

2026-10-10 19:21:24 -04:00

plot_transparency.rs

Draw object transparency on screen, in exports and in plots (#764)

2026-10-13 06:12:48 -04:00

plotters.rs

Plot dialog: device, plot style table, Window <, and a preview of its settings (#673)

2026-10-12 03:21:33 -04:00

point_modifiers.rs

Point prompts: FROM, M2P/MTP, point filters, * prefix and <angle override (fixes #392) (#402)

2026-10-10 18:43:24 -04:00

post_command_passes.rs

Engine: run the post-command passes from one place (#856)

2026-10-13 05:23:39 -04:00

prompt_keywords.rs

ELLIPSE Rotation/Parameter and BREAK First point take effect (fixes #219) (#222)

2026-10-10 14:37:34 -04:00

props_bad_lineweight.rs

Properties: reject a malformed lineweight instead of setting 0.25 mm (#480) (#580)

2026-10-11 13:41:25 -04:00

props_insert_scale_attribs.rs

Properties: changing a block's scale moves and resizes its attributes (#481) (#579)

2026-10-11 13:41:10 -04:00

purge_mlinestyles.rs

File-format follow-ups: version-gated MULTILEADER and DIMSTYLE groups, kept $DWGCODEPAGE, PURGE multiline styles (#632)

2026-10-11 19:54:03 -04:00

purge_prompts.rs

PURGE test: add the zero-length line directly

2026-10-10 17:45:43 -04:00

qdim_modes.rs

QDIM: Staggered, Baseline, Ordinate, Radius, Diameter, datumPoint and Edit (fixes #507) (#524)

2026-10-11 12:11:07 -04:00

qdim.rs

QDIM: one snap index per call, cap the input (fixes #356) (#357)

2026-10-10 17:31:50 -04:00

query_entities.rs

선택 객체 조회 필터와 MCP 연동 추가 (#1253)

2026-10-19 02:55:02 -04:00

quickcalc.rs

feat(ui): QuickCalc palette; CAL points, vector functions, unit conversion (part of #563) (#569)

2026-10-11 13:24:46 -04:00

recent_commands.rs

Shortcut menus: command menu while a command runs, selection menu with object edits (part of #512) (#515)

2026-10-11 11:48:12 -04:00

rectang_ortho.rs

fix(engine): preserve rectangle area with ortho enabled (#1117)

2026-10-15 18:34:36 -06:00

refedit.rs

REFEDIT, REFSET and REFCLOSE: edit block references in place (#818)

2026-10-13 04:37:31 -04:00

region.rs

REGION: region entity, UNION/SUBTRACT/INTERSECT, MASSPROP (fixes #510) (#526)

2026-10-11 12:12:09 -04:00

rename_cmdline.rs

-RENAME prompts; RENAME renames blocks (fixes #264) (#266)

2026-10-10 16:12:03 -04:00

rotate_reference.rs

ROTATE: Reference option (fixes #235) (#236)

2026-10-10 14:37:40 -04:00

save_as_export.rs

Save As to an image or PDF exports without renaming the drawing (fixes #327) (#329)

2026-10-10 16:54:37 -04:00

save_reports_not_saved.rs

Keep the ACIS geometry of 3D solids, regions and bodies on save (ACDSDATA) (#781)

2026-10-13 04:35:31 -04:00

save_version.rs

SAVEAS version and binary DXF, default save version (fixes #421) (#431)

2026-10-11 11:19:47 -04:00

select_keywords.rs

Select objects: BOX, AUto, SIngle, Multiple, Group and Undo keywords (fixes #428) (#438)

2026-10-11 11:23:03 -04:00

select_similar.rs

SELECTSIMILAR and object isolation: ISOLATEOBJECTS, HIDEOBJECTS, UNISOLATEOBJECTS (part of #428) (#434)

2026-10-11 11:20:02 -04:00

select_underscore_keywords.rs

Select objects accepts keywords with a leading underscore (_L, _ALL, _W…) (fixes #1172) (#1193)

2026-10-19 02:30:46 -04:00

selection_cycling.rs

Selection cycling: a click over overlapping objects lists them, Shift+Space steps through them (#1149)

2026-10-19 02:54:16 -04:00

selection_modes.rs

Select objects: W, C, F, WP and CP selection modes (fixes #224) (#226)

2026-10-11 11:13:01 -04:00

setvar_coverage.rs

Draw object transparency on screen, in exports and in plots (#764)

2026-10-13 06:12:48 -04:00

shapes.rs

Inquiry: SHAPES reports closed-shape geometry facts (#1507)

2026-10-19 02:53:10 -04:00

snap_annotations.rs

Dimensions snap; justified text snaps and grips at its alignment point; grid snap follows SNAPBASE/SNAPANG; OSNAPHATCH (fixes #334) (#337)

2026-10-10 16:55:12 -04:00

snap_blocks.rs

Object snaps find the geometry inside block references (fixes #314) (#318)

2026-10-10 16:11:58 -04:00

snap_curves.rs

Midpoint, Perpendicular and Tangent snaps on elliptical arcs and splines; Quadrant stays on the arc (fixes #332) (#333)

2026-10-10 16:55:16 -04:00

snap_intersections_aperture.rs

Performance: restrict object-snap intersections to cursor aperture (#701)

2026-10-13 05:02:28 -04:00

snap_nearest.rs

Nearest snap picks the closest object in any drawing order (fixes #323) (#324)

2026-10-10 16:54:42 -04:00

snap_overrides.rs

Object snap overrides at point prompts, Shift/Ctrl+right-click snap menu, Tab cycling (fixes #393) (#409)

2026-10-10 18:44:21 -04:00

snap_tracking.rs

Holding Shift overrides ortho while it is held, as in AutoCAD (#1198)

2026-10-19 02:54:51 -04:00

snaps_more.rs

Dynamic Input options menu (DYNPROMPT), second-value lock; INS on ATTDEF/MLEADER, GCEN on closed splines (part of #519) (#523)

2026-10-11 12:10:52 -04:00

space_is_enter.rs

Scripts and the command line read a trailing or double space as Enter (fixes #227) (#229)

2026-10-11 11:13:15 -04:00

spline_degree.rs

SPLINE: cap programmatic control points like spline.cv (fixes #719) (#776)

2026-10-13 04:35:14 -04:00

spline_options.rs

SPLINE: Knots, start/end Tangency, toLerance and Object (part of #408) (#413)

2026-10-10 19:19:57 -04:00

stretch_select.rs

STRETCH: polygon and fence selection (#892)

2026-10-13 04:47:19 -04:00

stretch.rs

STRETCH: repeat Select objects until Enter, C/W windows, Displacement (fixes #228) (#231)

2026-10-10 17:32:39 -04:00

table_breaks.rs

Xrefs and data links: follow stored paths only on this computer or the drawing's share

2026-10-16 17:18:34 +00:00

table_formulas.rs

Tables: cell styles, formulas, TABLEDIT and TABLEEXPORT (part of #534) (#548)

2026-10-11 12:47:25 -04:00

table_styles.rs

Tables: cell styles, formulas, TABLEDIT and TABLEEXPORT (part of #534) (#548)

2026-10-11 12:47:25 -04:00

temp_tracking.rs

Zoom Window: the opposite corner ignores ortho, so the window stays a rectangle (fixes #787) (#790)

2026-10-13 04:36:46 -04:00

templates.rs

Support files: DWT templates for NEW/QNEW, SAVEAS .dwt, user alias files (fixes #552) (#562)

2026-10-11 13:12:32 -04:00

text_commands.rs

TEXTEDIT prompt, Undo and Mode; MTEXT takes lines until an empty one (#234) (#239)

2026-10-10 14:37:52 -04:00

text_left_justify.rs

TL/ML/BL text is placed by its alignment point (fixes #342) (#346)

2026-10-10 17:31:56 -04:00

tolerance.rs

TOLERANCE: GD&T feature control frames (fixes #420) (#427)

2026-10-11 11:19:32 -04:00

transparent.rs

Transparent 'ZOOM/'PAN run nested and resume the interrupted command (fixes #220) (#221)

2026-10-11 11:12:47 -04:00

trim_closed_polyline.rs

TRIM: a pick after a closed polyline's last cut keeps only the complementary run (#726) (#771)

2026-10-13 04:34:46 -04:00

trim_extend_options.rs

TRIM/EXTEND: cutting edges, Fence, Crossing, mOde, Project, Edge, eRase, Undo (part of #397) (#403)

2026-10-10 18:43:28 -04:00

undo_control.rs

UNDO Mark/Back, BEgin/End, Auto and Control; MREDO; UNDOCTL (part of #461) (#464)

2026-10-11 11:36:30 -04:00

undo_count.rs

UNDO asks for the number of operations; U undoes one (fixes #241) (#242)

2026-10-10 14:37:58 -04:00

undo_layout_tab.rs

Undo/redo of LAYOUT Rename/New keeps the session on a layout that exists (fixes #371) (#375)

2026-10-10 18:08:45 -04:00

viewport_clip.rs

Drafting/plot/UI follow-ups: PolarSnap over isometric snap, MVIEW Restore, plot margins, PNG/SVG pens, PE_URL links, OPTIONS settings (part of #626) (#633)

2026-10-11 20:11:06 -04:00

vplayer_prompts.rs

VPLAYER: option prompts at the command line (fixes #381) (#387)

2026-10-10 18:10:35 -04:00

vports.rs

Tiled model viewports: VPORTS, saved viewport configurations, DXF VPORT table (part of #463) (#504)

2026-10-11 11:43:11 -04:00

wblock_base.rs

WBLOCK honours base when writing a block (fixes #297) (#300)

2026-10-10 16:11:07 -04:00

xdata_follows_entity.rs

Xdata travels with its object: COPY, MIRROR, ARRAY and paste keep it (#890)

2026-10-13 04:38:34 -04:00

xref.rs

Xrefs and data links: follow stored paths only on this computer or the drawing's share

2026-10-16 17:18:34 +00:00

zoom_keywords.rs

Named views (VIEW), Zoom Realtime and Dynamic, ZOOMFACTOR (part of #463) (#503)

2026-10-11 11:42:56 -04:00

zoom_viewport.rs

View: refuse a view that maps to an infinite viewport view, keeping the viewport (fixes #714) (#749)

2026-10-13 04:33:59 -04:00

zoom_window_ortho.rs

Zoom Window: the opposite corner ignores ortho, so the window stays a rectangle (fixes #787) (#790)

2026-10-13 04:36:46 -04:00