cadcraft

mirror of https://github.com/storytold/cadcraft.git synced 2026-11-03 00:42:46 -06:00

Files

T

Rahulandrahul05ranjan 03101e8d77 fix(io): a moved DIMENSION draws its block at its insertion point (group 12) (#2634 ) (#2636 )

A DIMENSION moved by an older AutoCAD keeps its *D block contents where
they were and the move in DXF group 12, and is drawn translated by the
insertion point. Group 12 was never read into Dimension, so the block
rendered at its pre-move position and the extents reached there too.

Read group 12 into a new Dimension::insertion_point, draw the block
translated by it, move its bounds with it in the extents, test the
block's text where it draws, and write group 12 back whenever the block
written is the one read from the file. Regenerated geometry (edits drop
the block link) sits at its definition points, so no offset is kept or
written for it.

Co-authored-by: rahul05ranjan <11793455+rahul05ranjan@users.noreply.github.com>

2026-11-02 15:01:26 -07:00

angle_prompts.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

angle_settings.rs

Read bearings and compass points as AutoCAD does (#2590 )

2026-11-01 14:38:14 -05:00

annotate_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

annotative.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

arc_ctrl_direction.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

array_commands.rs

Reject invalid fill angles in JSON arraypolar (#2655 )

2026-11-02 14:26:28 -07:00

assoc_array.rs

Write option prompts without "or", as AutoCAD does (#2540 )

2026-11-02 14:36:32 -07:00

attdef_command.rs

-ATTDEF at the command line: attribute modes, AFLAGS, and the text's prompts (#2597 )

2026-11-01 14:37:49 -05:00

attdisp_attsync.rs

ATTDISP: View > Attribute Display > Normal, On and Off, and 'ATTDISP inside another command

2026-10-24 07:04:43 -07:00

attedit_prompts.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

attrib_modes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

attrib_props.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

attribute_tools.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

attribute_value_baseline.rs

fix(engine): refresh attribute baselines after value changes (#2214 )

2026-10-29 21:38:15 -04:00

block_description.rs

Blocks: Modify > Object > Block Description..., and the Block Editor saves a changed description

2026-10-24 21:11:10 -07:00

block_keep.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

block_redefine.rs

BLOCKREPLACE: Tools > Express Tools > Replace Block replaces every reference of one block with another

2026-10-24 05:57:38 -07:00

blockreplace.rs

cargo fmt

2026-10-25 04:41:25 +00:00

break_closed_polyline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

break_join_locked_layers.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

break_keeps_z.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

burst.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

change_command.rs

CHANGE: change objects by a change point or their properties, as AutoCAD does (#2534 )

2026-10-31 10:33:00 -04:00

chprop_command.rs

CHPROP: change properties at the command line, as AutoCAD asks for them (#2497 )

2026-10-30 15:46:27 -04:00

classic_array.rs

-ARRAY: the classic command-line array, as AutoCAD lays it out (#2538 )

2026-10-31 10:34:44 -04:00

compare_export.rs

fix(io): a moved DIMENSION draws its block at its insertion point (group 12) (#2634 ) (#2636 )

2026-11-02 15:01:26 -07:00

constraint_geometry.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

constraint_infer.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

copy_count.rs

Refuse invalid count in JSON copy instead of clamping it (#2294 )

2026-10-29 21:21:58 -04:00

count.rs

analysis: report found/analysed/skipped counts, caps and implausibility (#1890 )

2026-10-24 01:56:51 -04:00

dash_block.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dash_units.rs

Read bearings and compass points as AutoCAD does (#2590 )

2026-11-01 14:38:14 -05:00

data_extraction.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_baseline_spacing.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_chain.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_commands.rs

Dimensions: report the measurement as soon as one is created (#2421 ) (#2438 )

2026-10-29 21:31:22 -04:00

dim_explode_text.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_properties.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_radial_inside.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_radial_outside.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_vars.rs

Merge storytold/cadcraft#2101

2026-10-25 02:21:58 +00:00

dimtedit_prompts.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

drafting_spacing.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

draw_prompts.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

draworder.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dyn_input.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dynamic_block_data.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dynamic_grips.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

fillet_chamfer.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

fix_holds_grips.rs

A Fix on a derived point (a line's midpoint, an arc's end) holds the position it had before the edit (#2077 )

2026-10-25 12:13:25 -04:00

followups_626.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

grip_dim_input.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

grip_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

grip_selection.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

group_selection.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

groups.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

hatch_assoc.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

hatch_dialog_helpers.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

hatch_numeric_validation.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

hatch_options.rs

Close hatch boundaries where a line ends just short of a flattened ellipse (#1690 ) (#1738 )

2026-10-24 01:54:04 -04:00

helix.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

inquiry_keywords.rs

Merge pull request #2193 from dotCooCoo/feat/measure-arc-segments

2026-10-27 13:44:25 -04:00

inquiry_variables.rs

AREA, PERIMETER and DISTANCE system variables, as AutoCAD sets them (#2552 )

2026-11-02 14:36:42 -07:00

inquiry_z.rs

Polyface meshes stay one object through DXF and DWG (#2600 )

2026-11-01 14:40:30 -05:00

insert_attribute_prompts.rs

-INSERT: ATTREQ, Preset and Verify attributes as AutoCAD asks them (#2535 )

2026-10-31 10:32:56 -04:00

insert_prompts.rs

-INSERT: X, Y and Z presets, XYZ, and the Z factor AutoCAD stores (#2480 )

2026-10-30 15:46:05 -04:00

isometric.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

join_close.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

json_param_validation.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

layer_cmdline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

layer_merge_delete.rs

engine: renaming a layer repoints every viewport's frozen list and colour overrides (#1264 )

2026-10-30 19:16:38 -07:00

layoff_repeat.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

layout_prompts.rs

Write option prompts without "or", as AutoCAD does (#2540 )

2026-11-02 14:36:32 -07:00

leader_command.rs

LEADER at the command line, as AutoCAD runs it (#2596 )

2026-11-01 14:37:56 -05:00

lisp_corpus.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

lisp_undo_in_routine.rs

U inside a LISP routine takes back the routine's last command (#2610 )

2026-11-01 14:38:10 -05:00

main.rs

AREA, PERIMETER and DISTANCE system variables, as AutoCAD sets them (#2552 )

2026-11-02 14:36:42 -07:00

malformed_handles.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

matchprop.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

measure_distance_snapping.rs

AREA and DIST: the Arc option measures arc segments

2026-10-25 21:17:18 -07:00

metric_linetypes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

mirror_degenerate_line.rs

Refuse mirror lines whose points are closer than the geometry EPS (#2555 )

2026-10-31 10:32:42 -04:00

mleader_content.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

mleader_remember.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

mline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

mocoro.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

modify_curves.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

mtext_columns.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

mtext_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

multiline_attributes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

named_viewports.rs

View: Viewports > Named Viewports... lists, restores and deletes saved viewport configurations

2026-10-25 16:07:11 -07:00

named_views.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

non_finite_edits.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

offset_closed_spline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

offset_ellipse_side.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

offset_move.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

oops_command.rs

OOPS: bring back what -WBLOCK erased; keep the last erase through REFEDIT; the Block Editor (#2625 )

2026-11-02 05:31:14 -05:00

options_profile.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

overkill.rs

OVERKILL: objects within the tolerance are duplicates wherever their numbers fall (#2653 )

2026-11-02 14:36:53 -07:00

parallel_display_list.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

pedit_multiple.rs

PEDIT Multiple at the command line (#2225 )

2026-10-29 21:20:58 -04:00

pedit_splinedit.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

pick_text.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

pickdrag.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

pline_arc_xline_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

plot_styles.rs

Merge remote-tracking branch 'origin/main' into land-1978

2026-11-02 15:01:09 -07:00

point_modifiers.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

polyface_explode.rs

Polyface meshes stay one object through DXF and DWG (#2600 )

2026-11-01 14:40:30 -05:00

post_command_passes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

prompt_keywords.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

prompt_or_once.rs

Say "or" once in prompts that offer options (#2563 )

2026-11-02 14:36:37 -07:00

props_bad_lineweight.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

props_insert_scale_attribs.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

purge_mlinestyles.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

purge_prompts.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

qdim_modes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

qdim.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

query_entities.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

quickcalc.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

recent_commands.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

rectang_ortho.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

rectang_polygon_order.rs

fix(draw): RECTANG and POLYGON vertices in AutoCAD's order; RECTANG remembers its modes (#2554 )

2026-10-31 10:32:53 -04:00

refedit.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

region.rs

analysis: report found/analysed/skipped counts, caps and implausibility (#1890 )

2026-10-24 01:56:51 -04:00

rename_cmdline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

rotate_reference.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

scale_offset_z.rs

Polyface meshes stay one object through DXF and DWG (#2600 )

2026-11-01 14:40:30 -05:00

select_keywords.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

select_similar.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

select_underscore_keywords.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

selection_cycling.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

selection_modes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

setvar_cecolor.rs

GETVAR CECOLOR reads back as text, as in AutoCAD (follow-up to #2014 ) (#2069 )

2026-10-25 12:13:18 -04:00

setvar_coverage.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

shapes.rs

analysis: report found/analysed/skipped counts, caps and implausibility (#1890 )

2026-10-24 01:56:51 -04:00

snap_annotations.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snap_blocks.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snap_curves.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snap_intersections_aperture.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snap_nearest.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snap_overrides.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snap_tracking.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snaps_more.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

solid_command.rs

SOLID: draw 2D solids, chained as AutoCAD chains them (#2489 )

2026-10-30 15:46:16 -04:00

space_is_enter.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

spline_degree.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

spline_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

stretch_select.rs

STRETCH moves only the multiline vertices inside the area (#1712 ) (#1739 )

2026-10-24 01:54:20 -04:00

stretch.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

table_formulas.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

table_styles.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

temp_tracking.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

text_commands.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

text_left_justify.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

tolerance.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

transparent.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

trim_closed_polyline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

trim_extend_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

undo_count.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

undo_layout_tab.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

viewport_clip.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

vplayer_prompts.rs

Write option prompts without "or", as AutoCAD does (#2540 )

2026-11-02 14:36:32 -07:00

vports.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

wipeout_grips.rs

fix: keep WIPEOUT closure coherent across grips and outlines (#2284 )

2026-10-29 21:31:17 -04:00

xdata_follows_entity.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

zoom_keywords.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

zoom_viewport.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

zoom_window_ortho.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00