cadcraft

mirror of https://github.com/storytold/cadcraft.git synced 2026-11-09 12:00:50 -06:00

Files

T

Tanish Manku 2b88b22949 Stage 1 stack: review fixes on #2584 , #2471 , #1626 , #2028 , #1026 , #2658 , #2612

- #2584: a tilted LWPOLYLINE/HATCH run is flattened to at most a million vertices, then
  its arcs stay chords (a hostile file of arcs asked for gigabytes; austin62jake). The
  file-format-parity.md hunk is dropped: maintainers update the parity docs.
- #2471: another program's proxy objects are in the DWG loss report as its proxy entities
  are (left out before 2013, or when their class can't be named); they went silently.
- #1626: a drawing saved at a view keeps it in the desktop app and when it has xrefs: the
  app's first frame and the xref pass both fitted the extents over it. OPEN's result says
  `saved_view`; one `view::saved_view` replaces the copy of `usable_view` in files.rs.
  A misplaced doc comment goes back to its test.
- #2028: a plot rotation (73) outside 0-3 is written back as 0, not as read.
- #1026: the binary code-page retry drops the first pass's tags before it runs (the peak
  doubled near the tag limit); a float spelling of an integer group clamps to what the
  width holds unsigned too, so 65535.0 reads as 65535 does, not 32767.
- #2658: the reference names Undo by the last command ("Undo Group of commands"); Undo
  matched nothing and went to the end of Edit. Ordering and its test share one rule.
- #2612: its test's Insert gets `clip: None` (XCLIP landed after it was written).

2026-11-05 18:34:43 -07:00

angle_prompts.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

angle_settings.rs

Read bearings and compass points as AutoCAD does (#2590 )

2026-11-01 14:38:14 -05:00

annotate_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

annotative.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

arc_ctrl_direction.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

array_commands.rs

Reject invalid fill angles in JSON arraypolar (#2655 )

2026-11-02 14:26:28 -07:00

assoc_array.rs

Write option prompts without "or", as AutoCAD does (#2540 )

2026-11-02 14:36:32 -07:00

attdef_command.rs

-ATTDEF at the command line: attribute modes, AFLAGS, and the text's prompts (#2597 )

2026-11-01 14:37:49 -05:00

attdisp_attsync.rs

ATTDISP: View > Attribute Display > Normal, On and Off, and 'ATTDISP inside another command

2026-10-24 07:04:43 -07:00

attedit_prompts.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

attrib_modes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

attrib_props.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

attribute_tools.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

attribute_value_baseline.rs

fix(engine): refresh attribute baselines after value changes (#2214 )

2026-10-29 21:38:15 -04:00

block_description.rs

Blocks: Modify > Object > Block Description..., and the Block Editor saves a changed description

2026-10-24 21:11:10 -07:00

block_keep.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

block_redefine.rs

BLOCKREPLACE: Tools > Express Tools > Replace Block replaces every reference of one block with another

2026-10-24 05:57:38 -07:00

blockreplace.rs

blocks: XCLIP and XCLIPFRAME, clipped references kept through DXF and DWG

2026-10-29 11:06:23 +01:00

break_closed_polyline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

break_join_locked_layers.rs

fix(modify): BREAK and TRIM keep the object's handle, as AutoCAD does

2026-10-31 16:34:08 +07:00

break_keeps_z.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

break_trim_keep_handle.rs

fix(modify): BREAK and TRIM keep the object's handle, as AutoCAD does

2026-10-31 16:34:08 +07:00

burst.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

change_command.rs

CHANGE: change objects by a change point or their properties, as AutoCAD does (#2534 )

2026-10-31 10:33:00 -04:00

chprop_command.rs

CHPROP: change properties at the command line, as AutoCAD asks for them (#2497 )

2026-10-30 15:46:27 -04:00

classic_array.rs

-ARRAY: the classic command-line array, as AutoCAD lays it out (#2538 )

2026-10-31 10:34:44 -04:00

compare_export.rs

Merge #2354 (XCLIP and XCLIPFRAME) onto main

2026-11-03 15:00:20 -07:00

constraint_geometry.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

constraint_infer.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

copy_count.rs

Refuse invalid count in JSON copy instead of clamping it (#2294 )

2026-10-29 21:21:58 -04:00

count.rs

blocks: XCLIP and XCLIPFRAME, clipped references kept through DXF and DWG

2026-10-29 11:06:23 +01:00

dash_block.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dash_units.rs

Read bearings and compass points as AutoCAD does (#2590 )

2026-11-01 14:38:14 -05:00

data_extraction.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_baseline_spacing.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_chain.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_commands.rs

Dimensions: report the measurement as soon as one is created (#2421 ) (#2438 )

2026-10-29 21:31:22 -04:00

dim_explode_text.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_properties.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_radial_inside.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_radial_outside.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dim_vars.rs

Merge storytold/cadcraft#2101

2026-10-25 02:21:58 +00:00

dimtedit_prompts.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

drafting_spacing.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

draw_prompts.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

draworder.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dyn_input.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

dynamic_block_data.rs

Dynamic blocks: index kept objects once per listing; copy each value record once (#2678 )

2026-11-02 22:52:35 -05:00

dynamic_grips.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

explode_stretched.rs

EXPLODE: a block reference with different X and Y scales gives ellipses, not circles (#2649 )

2026-11-02 22:54:03 -05:00

extend_polyline_arc_end.rs

EXTEND: a polyline's arc end segment runs on round its circle (#2656 )

2026-11-02 22:52:39 -05:00

fillet_chamfer.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

fix_holds_grips.rs

A Fix on a derived point (a line's midpoint, an arc's end) holds the position it had before the edit (#2077 )

2026-10-25 12:13:25 -04:00

followups_626.rs

Merge remote-tracking branch 'upstream/main' into pr/dview

2026-10-25 16:26:25 -04:00

grip_dim_input.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

grip_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

grip_selection.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

group_selection.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

groups.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

hatch_assoc.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

hatch_dialog_helpers.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

hatch_numeric_validation.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

hatch_options.rs

Close hatch boundaries where a line ends just short of a flattened ellipse (#1690 ) (#1738 )

2026-10-24 01:54:04 -04:00

helix.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

inquiry_keywords.rs

Merge pull request #2193 from dotCooCoo/feat/measure-arc-segments

2026-10-27 13:44:25 -04:00

inquiry_variables.rs

AREA, PERIMETER and DISTANCE system variables, as AutoCAD sets them (#2552 )

2026-11-02 14:36:42 -07:00

inquiry_z.rs

Polyface meshes stay one object through DXF and DWG (#2600 )

2026-11-01 14:40:30 -05:00

insert_attribute_prompts.rs

-INSERT: ATTREQ, Preset and Verify attributes as AutoCAD asks them (#2535 )

2026-10-31 10:32:56 -04:00

insert_prompts.rs

-INSERT: X, Y and Z presets, XYZ, and the Z factor AutoCAD stores (#2480 )

2026-10-30 15:46:05 -04:00

isometric.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

join_close.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

json_param_validation.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

layer_cmdline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

layer_merge_delete.rs

engine: renaming a layer repoints every viewport's frozen list and colour overrides (#1264 )

2026-10-30 19:16:38 -07:00

layoff_repeat.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

layout_prompts.rs

Write option prompts without "or", as AutoCAD does (#2540 )

2026-11-02 14:36:32 -07:00

leader_command.rs

LEADER at the command line, as AutoCAD runs it (#2596 )

2026-11-01 14:37:56 -05:00

lisp_corpus.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

lisp_undo_in_routine.rs

U inside a LISP routine takes back the routine's last command (#2610 )

2026-11-01 14:38:10 -05:00

main.rs

Merge branch 'stk-2545' into stack/s1

2026-11-05 17:23:13 -07:00

malformed_handles.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

matchprop.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

measure_distance_snapping.rs

Merge main into land/2354

2026-11-03 18:07:17 -07:00

metric_linetypes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

minsert.rs

MINSERT: a block reference repeated in rows and columns, as AutoCAD does (#2698 )

2026-11-03 09:06:58 -05:00

mirror_degenerate_line.rs

Refuse mirror lines whose points are closer than the geometry EPS (#2555 )

2026-10-31 10:32:42 -04:00

mleader_content.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

mleader_remember.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

mline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

mocoro.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

modify_curves.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

mtext_columns.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

mtext_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

multiline_attributes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

named_viewports.rs

View: Viewports > Named Viewports... lists, restores and deletes saved viewport configurations

2026-10-25 16:07:11 -07:00

named_views.rs

View twist: a window too large to turn saves no view, and the saved one stays

2026-11-03 15:40:39 -07:00

non_finite_edits.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

offset_closed_spline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

offset_ellipse_side.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

offset_move.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

oops_command.rs

OOPS: bring back what -WBLOCK erased; keep the last erase through REFEDIT; the Block Editor (#2625 )

2026-11-02 05:31:14 -05:00

options_profile.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

overkill.rs

OVERKILL: objects within the tolerance are duplicates wherever their numbers fall (#2653 )

2026-11-02 14:36:53 -07:00

parallel_display_list.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

pedit_multiple.rs

PEDIT Multiple at the command line (#2225 )

2026-10-29 21:20:58 -04:00

pedit_splinedit.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

pick_text.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

pickdrag.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

pline_arc_xline_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

plot_styles.rs

Merge remote-tracking branch 'origin/main' into land-1978

2026-11-02 15:01:09 -07:00

point_modifiers.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

polyface_explode.rs

Polyface meshes stay one object through DXF and DWG (#2600 )

2026-11-01 14:40:30 -05:00

post_command_passes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

prompt_keywords.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

prompt_or_once.rs

Say "or" once in prompts that offer options (#2563 )

2026-11-02 14:36:37 -07:00

properties_set_locked.rs

Stage 1 stack: review fixes on #2584 , #2471 , #1626 , #2028 , #1026 , #2658 , #2612

2026-11-05 18:34:43 -07:00

props_bad_lineweight.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

props_insert_scale_attribs.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

purge_mlinestyles.rs

blocks: XCLIP and XCLIPFRAME, clipped references kept through DXF and DWG

2026-10-29 11:06:23 +01:00

purge_prompts.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

qdim_modes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

qdim.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

query_entities.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

quickcalc.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

recent_commands.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

rectang_ortho.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

rectang_polygon_order.rs

fix(draw): RECTANG and POLYGON vertices in AutoCAD's order; RECTANG remembers its modes (#2554 )

2026-10-31 10:32:53 -04:00

refedit.rs

blocks: XCLIP and XCLIPFRAME, clipped references kept through DXF and DWG

2026-10-29 11:06:23 +01:00

region.rs

analysis: report found/analysed/skipped counts, caps and implausibility (#1890 )

2026-10-24 01:56:51 -04:00

rename_cmdline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

rotate_reference.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

scale_offset_z.rs

Polyface meshes stay one object through DXF and DWG (#2600 )

2026-11-01 14:40:30 -05:00

select_keywords.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

select_similar.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

select_underscore_keywords.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

selection_cycling.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

selection_modes.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

setvar_cecolor.rs

GETVAR CECOLOR reads back as text, as in AutoCAD (follow-up to #2014 ) (#2069 )

2026-10-25 12:13:18 -04:00

setvar_coverage.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

shapes.rs

analysis: report found/analysed/skipped counts, caps and implausibility (#1890 )

2026-10-24 01:56:51 -04:00

snap_annotations.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snap_blocks.rs

blocks: XCLIP and XCLIPFRAME, clipped references kept through DXF and DWG

2026-10-29 11:06:23 +01:00

snap_curves.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snap_intersections_aperture.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snap_nearest.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snap_overrides.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

snap_tracking.rs

blocks: XCLIP and XCLIPFRAME, clipped references kept through DXF and DWG

2026-10-29 11:06:23 +01:00

snaps_more.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

solid_command.rs

SOLID: draw 2D solids, chained as AutoCAD chains them (#2489 )

2026-10-30 15:46:16 -04:00

space_is_enter.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

spline_degree.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

spline_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

stretch_select.rs

STRETCH moves only the multiline vertices inside the area (#1712 ) (#1739 )

2026-10-24 01:54:20 -04:00

stretch.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

table_formulas.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

table_styles.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

temp_tracking.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

text_commands.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

text_left_justify.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

tolerance.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

transparent.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

trim_closed_polyline.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

trim_extend_options.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

undo_count.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

undo_layout_tab.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

viewport_clip.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

vplayer_prompts.rs

Write option prompts without "or", as AutoCAD does (#2540 )

2026-11-02 14:36:32 -07:00

vports.rs

Merge remote-tracking branch 'upstream/main' into pr/dview

2026-10-25 16:26:25 -04:00

wipeout_grips.rs

fix: keep WIPEOUT closure coherent across grips and outlines (#2284 )

2026-10-29 21:31:17 -04:00

xclip.rs

XCLIP: ON/OFF checks without copying boundaries and sets each reference once (CodeRabbit on #2756 )

2026-11-04 13:02:38 -07:00

xdata_follows_entity.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

zoom_keywords.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

zoom_viewport.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00

zoom_window_ortho.rs

CI: one test binary per crate, nextest, line tables only (#1989 )

2026-10-23 13:34:26 -04:00