3 people 3fa7275e4f DXF: $ANGBASE is in degrees (#1234) ...

AutoCAD writes $ANGBASE in degrees (a drawing whose angles run clockwise from
north has 90.0); CADCraft read and wrote it as radians, so such a drawing's
angle base came in as 90 radians (about 116.6 degrees), turning typed angles,
polar tracking and angles shown in Properties. The reader now converts to
radians (the variable's unit), the writer back, and the DWG reader's hand-off
of the value in DXF form gives degrees.

Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-19 02:31:12 -04:00

..

data

Dynamic block grips: show and drag a dynamic reference's grips (stacked on #878) (#883)

2026-10-13 05:47:27 -04:00

acad_interop.rs

AutoCAD interop: justified text, DIMPOST, current dimension style, *D block colours (#1062)

2026-10-19 02:28:47 -04:00

acis_data_store.rs

Keep the ACIS geometry of 3D solids, regions and bodies on save (ACDSDATA) (#781)

2026-10-13 04:35:31 -04:00

angle_header.rs

DXF: $ANGBASE is in degrees (#1234)

2026-10-19 02:31:12 -04:00

annotative_roundtrip.rs

Annotative scaling: DXF and status bar annotation scale list (fixes #468) (#506)

2026-10-11 11:42:27 -04:00

assoc_array_roundtrip.rs

ARRAYEDIT and ARRAYCLOSE for associative arrays (fixes #448) (#460)

2026-10-11 11:36:02 -04:00

attrib_modes.rs

Attributes keep Verify, Preset and Lock position (stacked on #854) (#876)

2026-10-13 05:56:05 -04:00

attrib_props.rs

Attributes keep Verify, Preset and Lock position (stacked on #854) (#876)

2026-10-13 05:56:05 -04:00

block_expansion.rs

Bound block expansion in drawing and extents: nested, self-referencing or arrayed blocks no longer hang (fixes #255) (#267)

2026-10-10 15:33:37 -04:00

closed_spline.rs

SPLINE Close is periodic, options report; POLYGON typed radius has a flat bottom; CIRCLE rejects bad input (fixes #238) (#240)

2026-10-10 15:34:24 -04:00

codepages.rs

DXF: read pre-2007 files in their $DWGCODEPAGE (CJK, Cyrillic, Central European…) (fixes #505) (#511)

2026-10-11 11:47:42 -04:00

dim_block_resave_roundtrip.rs

Write an unedited dimension's block as it was read (#782)

2026-10-13 04:35:38 -04:00

dim_block_text.rs

Dimension edits: DIMEDIT Oblique/New/Rotate/Home, DIMJOGGED, DIMJOGLINE, DIMBREAK, DIMINSPECT (part of #507) (#522)

2026-10-11 12:10:38 -04:00

dim_marks_roundtrip.rs

Dimension edits: DIMEDIT Oblique/New/Rotate/Home, DIMJOGGED, DIMJOGLINE, DIMBREAK, DIMINSPECT (part of #507) (#522)

2026-10-11 12:10:38 -04:00

dimstyle_vars_roundtrip.rs

Dimension edits: DIMEDIT Oblique/New/Rotate/Home, DIMJOGGED, DIMJOGLINE, DIMBREAK, DIMINSPECT (part of #507) (#522)

2026-10-11 12:10:38 -04:00

drafting_spacing.rs

Persist SNAPUNIT and GRIDUNIT in DXF (fix #607) (#614)

2026-10-11 14:28:56 -04:00

dwg_header_vars.rs

DWG and DXF keep ANGBASE/ANGDIR, fillet/chamfer, elevation and the snap grid (fixes #349) (#350)

2026-10-10 17:32:07 -04:00

dwg_layout_owner.rs

DWG: entities of a second layout stay on it in AutoCAD (#1057) (#1080)

2026-10-19 02:28:58 -04:00

dwg_roundtrip_losses.rs

Tables: cell styles, formulas, TABLEDIT and TABLEEXPORT (part of #534) (#548)

2026-10-11 12:47:25 -04:00

dwt_template.rs

Support files: DWT templates for NEW/QNEW, SAVEAS .dwt, user alias files (fixes #552) (#562)

2026-10-11 13:12:32 -04:00

dxf_versions.rs

Tables: table breaking and CSV data links (fixes #534) (#553)

2026-10-11 12:47:39 -04:00

dynblock_read.rs

Dynamic block grips: show and drag a dynamic reference's grips (stacked on #878) (#883)

2026-10-13 05:47:27 -04:00

entity_props_roundtrip.rs

Hatch: associative hatches follow their boundary objects; DXF 97/330 source objects (part of #451) (#454)

2026-10-11 11:28:33 -04:00

followups_626.rs

File-format follow-ups: version-gated MULTILEADER and DIMSTYLE groups, kept $DWGCODEPAGE, PURGE multiline styles (#632)

2026-10-11 19:54:03 -04:00

groups_roundtrip.rs

Groups: PICKSTYLE group selection, Ctrl+Shift+A and -GROUP options (fixes #417) (#424)

2026-10-11 11:19:04 -04:00

hatch_assoc_roundtrip.rs

DXF: associative hatches in blocks keep their boundary; boundaries carry the hatch reactor (#871)

2026-10-13 04:46:29 -04:00

hatch_pattern_def.rs

Hatches: draw the pattern definition stored in the file; scale library patterns in metric drawings (#643)

2026-10-11 19:54:18 -04:00

helix_roundtrip.rs

HELIX: helix entity drawn as a spline (part of #510) (#521)

2026-10-11 12:10:24 -04:00

layout_paper_units.rs

Layouts in millimetres plot in millimetres whatever MEASUREMENT says (#1058) (#1085)

2026-10-19 02:29:03 -04:00

low_handseed.rs

Don't give entities made while reading handles the file still uses (#783)

2026-10-13 04:35:44 -04:00

mleader_content.rs

DXF: native MULTILEADER read and write instead of LEADER + MTEXT (fixes #459) (#465)

2026-10-11 11:36:45 -04:00

mleader_roundtrip.rs

Attributes keep Verify, Preset and Lock position (stacked on #854) (#876)

2026-10-13 05:56:05 -04:00

mline_roundtrip.rs

MLINE: multiline entity, MLSTYLE and MLEDIT (part of #510) (#517)

2026-10-11 11:48:27 -04:00

model_layout_plot_type.rs

DXF/DWG: write the Model layout's plot type as extents, not "Layout information" (#765)

2026-10-13 04:34:35 -04:00

mtext_columns_roundtrip.rs

feat(text): MTEXT paragraph formatting (indents, tabs, lists) and columns (#547)

2026-10-11 12:47:12 -04:00

mtext_embedded_object.rs

fix(dxf): MTEXT direction ignores the embedded object's insertion point (#667) (#834)

2026-10-13 04:37:47 -04:00

mtext_line_spacing.rs

feat(text): MTEXT paragraph formatting (indents, tabs, lists) and columns (#547)

2026-10-11 12:47:12 -04:00

multiline_attributes.rs

Multiline attributes: read, draw and save their text (they were lost on save) (#854)

2026-10-13 05:54:25 -04:00

paperview_marker.rs

Viewports: polygonal, object and clipped viewports, VPCLIP, MVIEW ON/OFF/Lock/Restore (part of #453) (#458)

2026-10-11 11:35:46 -04:00

passthrough_image_roundtrip.rs

MLINE: multiline entity, MLSTYLE and MLEDIT (part of #510) (#517)

2026-10-11 11:48:27 -04:00

pdf_followups.rs

Drafting/plot/UI follow-ups: PolarSnap over isometric snap, MVIEW Restore, plot margins, PNG/SVG pens, PE_URL links, OPTIONS settings (part of #626) (#633)

2026-10-11 20:11:06 -04:00

pdf_layers.rs

PDF export: layers as PDF layers (OCG), several sheets per file, hyperlinks (part of #560) (#567)

2026-10-11 13:23:59 -04:00

pdf_text.rs

PDF export: real text in embedded TrueType subsets (part of #560) (#571)

2026-10-11 13:24:14 -04:00

plot_layout_scale.rs

Plot: apply an explicit scale to non-fitted layout plots (#490) (#598)

2026-10-11 14:04:10 -04:00

plot_model_png_scale.rs

Plot: model-space PNG and SVG plots honour fit: false without a scale, at 1:1 like PDF (fixes #713) (#744)

2026-10-13 05:10:52 -04:00

plot_styles.rs

Plot styles: named styles (STB), PLOTSTYLE, STYLESMANAGER and table files (part of #410) (#418)

2026-10-10 19:21:24 -04:00

region_roundtrip.rs

REGION: region entity, UNION/SUBTRACT/INTERSECT, MASSPROP (fixes #510) (#526)

2026-10-11 12:12:09 -04:00

roundtrip_audit.rs

fix(io): write DXF CLASS instance counts and preserve current leader style (#635)

2026-10-11 19:53:33 -04:00

skipped_records.rs

DXF: count the records the reader can't place; info reports them, convert warns (part of #865) (#872)

2026-10-13 05:31:58 -04:00

sortents.rs

Draw order: DRAWORDER Above/Under objects, TEXTTOFRONT, HATCHTOBACK, SORTENTSTABLE read (part of #439) (#446)

2026-10-11 11:23:59 -04:00

spline_fit_data.rs

SPLINE: Knots, start/end Tangency, toLerance and Object (part of #408) (#413)

2026-10-10 19:19:57 -04:00

split_entities_section.rs

DXF: read every ENTITIES section, not only the last (fixes #865) (#869)

2026-10-13 04:38:24 -04:00

style_typeface.rs

Fonts: use the TrueType typeface from a style's xdata and find families by first word (#894)

2026-10-13 05:12:33 -04:00

table_cellstyle_roundtrip.rs

Tables: table breaking and CSV data links (fixes #534) (#553)

2026-10-11 12:47:39 -04:00

tables_objects_roundtrip.rs

fix(io): write DXF CLASS instance counts and preserve current leader style (#635)

2026-10-11 19:53:33 -04:00

text_left_justify.rs

TL/ML/BL text is placed by its alignment point (fixes #342) (#346)

2026-10-10 17:31:56 -04:00

tolerance_roundtrip.rs

TOLERANCE: GD&T feature control frames (fixes #420) (#427)

2026-10-11 11:19:32 -04:00

user_lin_pat_roundtrip.rs

Support files: user .lin linetypes and .pat hatch patterns (part of #552) (#557)

2026-10-11 13:12:17 -04:00

view_tables_roundtrip.rs

Tiled model viewports: VPORTS, saved viewport configurations, DXF VPORT table (part of #463) (#504)

2026-10-11 11:43:11 -04:00

viewport_clip_roundtrip.rs

Viewports: polygonal, object and clipped viewports, VPCLIP, MVIEW ON/OFF/Lock/Restore (part of #453) (#458)

2026-10-11 11:35:46 -04:00

xref_roundtrip.rs

Save xref layer overrides with the host, in DXF and DWG (fixes #886) (#889)

2026-10-13 04:46:45 -04:00