MLEADER's Options answered "not available yet" for Leader type sPline and
None and for Content type Block. Spline leaders now draw as smooth curves
through their points (DXF LEADER path type 72 = 1); None places only the
content at one picked point; Block asks for a block name and how it
attaches (Center extents or Insertion point) and inserts it at the end of
the landing. MLeader gains `spline` and `block` (serde defaults); DXF stays
LEADER + MTEXT/INSERT. PURGE, RENAME, copy/paste, FLATTEN, grips and
extents follow the block content. The choices are remembered like the
other MLEADER options. docs/gaps.md: top-10 row 5, F1 and F10 narrowed.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The options at MTEXT's "Specify opposite corner" prompt printed "not
available yet". Each now asks its question and returns to the corner
prompt: Height (also sets TEXTSIZE), Justify (TL..BR, the insertion point
is the box's attachment point), Line spacing (At least/Exactly, then a
factor such as 1.5x or a distance), Rotation (picked, or typed through the
drawing's angle settings; the box turns with it), Style (? lists them),
Width (replaces the opposite corner) and Columns (No; Dynamic and Static
say columns are not available yet). MText stores the line spacing style
(DXF group 73) so Exactly round-trips.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The next MLEADER started again with "arrowhead first", Maxpoints 2 and
a landing line. As in AutoCAD, the order (arrowhead, landing or content
first) and the Options values (Maxpoints, leader landing, content type,
first and second angle) are now kept in Session::last_used for the
rest of the session and are where the next MLEADER starts. JSON calls
keep their documented defaults.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Typed at the command line or run from a script, DIMTEDIT ran the JSON
form at once and failed with "select dimensions". It now asks "Select
dimension", then "Specify new location for dimension text or
[Left/Right/Center/Home/Angle]": a point moves the text there (the text
follows the cursor in the preview), Left/Right/Center justify it,
Home restores the default position and Angle asks for the text angle.
A single preselected dimension is taken at once. Each answer runs the
existing JSON form on the picked dimension. DIMTED is its alias.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Only the direction of the picked dimension line location was used, so
the text always went outside beyond the arrowhead. A location inside
the circle (typed, picked or JSON `at`) now places the text there: the
dimension stores it as its text position, and the dimension line runs
from the text out to the arrowhead; a diameter's spans the circle,
broken around the text. DIMTIH (not DIMTOH) decides whether inside
text is horizontal. Outside locations keep the default placement.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Baseline dimensions were spaced by the bare style's DIMDLI × DIMSCALE, so
SETVAR DIMSCALE/DIMDLI (stored as overrides since #129) had no effect and a
style DIMSCALE of 0 collapsed the spacing to ~0. Use the continued
dimension's style with its overrides and the effective scale (the drawing's
DIMSCALE when the style's is 0), as drawing does; DIMSPACE's default spacing
uses the same scale.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
ROTATE's angle and the hatch pattern angle are rotations (AUNITS, clockwise
when ANGDIR is 1). The dimension line (Rotated) and dimension text angles are
directions from ANGBASE. CHAMFER's angle and the MLEADER angle constraints are
amounts in AUNITS. The ROTATE and HATCH defaults are offered as they would be
typed.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
CIRCLE/ARC no longer make a negative radius positive; POLYGON refuses a
non-integer sides count and a zero/negative radius or zero-length edge;
DONUT, RECTANG, PLINE, HATCH and TABLE refuse negative or zero sizes
instead of clamping them; LINE drops repeated points like the interactive
command; SPLINE needs two different fit points; DIMRADIUS/DIMDIAMETER/
DIMANGULAR refuse coincident points; DDPTYPE refuses an invalid PDMODE;
DIMSTYLE/DIMOVERRIDE list a non-positive DIMTXT/DIMTFAC or a negative
DIMASZ/DIMSCALE/DIMTSZ as ignored.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With DIMASSOC on, every dimension QDIM added looked up the objects under
its definition points by scanning the whole space, and each dimension
adds an entity, so QDIM over many objects took quadratic time (20,000
lines: 28 s). QDIM now builds the SnapIndex DIMCONTINUE/DIMBASELINE use
(#281) once per call; dimensions are no snap targets, so it stays valid
while QDIM adds them. A call naming more than 100,000 objects, or whose
objects give more than 100,000 distinct points, is refused before
anything is created.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
DIMORDINATE Xdatum/Ydatum/Mtext/Text/Angle, DIMRADIUS/DIMDIAMETER
Mtext/Text/Angle, DIMANGULAR Mtext/Text/Angle/Quadrant and DIMARC
Mtext/Text/Angle/Partial were listed but ignored (any DIMORDINATE
keyword other than Xdatum forced a Y datum). DIMLINEAR/DIMALIGNED
Angle rotated the dimension line instead of the text.
A shared DimText handles Mtext/Text (override text, <> = measurement)
and Angle (text rotation) for every placement prompt. Quadrant locks
the measured angle to a picked point's side; Partial dimensions the
part of the arc between two picked points. After Horizontal/Vertical/
Rotated only the text options remain listed.
MLEADER: leader Landing first / Content first switch the placement
order, Enter or Options opens the options loop (Leader type, leader
lAnding, Content type, Maxpoints, First/Second angle). Spline leaders,
leaderless and block content say "not available yet". Angle prompts
take numbers so scripts keep splitting the following tokens.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With DIMASSOC on, every chained dimension looked up the objects under
its definition points by scanning the whole space, and each point adds
an entity, so a long `points` list took quadratic time (16,000 points:
2.7 s continue, 10 s baseline). The chain now builds one x-sorted
SnapIndex up front. Dimensions are no snap targets, so the index stays
valid while the chain adds them, and each lookup is a binary search. The
index picks the same snap as find_snap: lowest rank first, then the first
object in space order. A call with more than 100,000 points is refused.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* DIMANGULAR: accept a circle
The first prompt offers "arc, circle, line" but picking a circle was
rejected. Picking a circle now uses its center as the angle vertex and
the picked point as the first endpoint, then asks for the second
endpoint.
* cargo fmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`SETVAR DIMSCALE 24` was stored in the header but never reached new
dimensions: they were created with no overrides, and the header DIMSCALE
was only a fallback for styles whose scale is zero.
As in AutoCAD, the header DIM* variables that differ from the current
dimension style are now its overrides, and new dimensions take them on
(`Drawing::dim_overrides`). Existing dimensions keep their size. Making a
style current, or editing the current style, sets the variables back to
the style's values (`Drawing::sync_dim_vars`), so
`dimstyle {"name": "Standard", "DIMSCALE": 24}` still works.
GETVAR/SETVAR read DIM* variables the header doesn't carry from the
current style.
Dimension extents now use the same scale as the geometry (the style with
the dimension's overrides) instead of multiplying by the header DIMSCALE.
A DIMSCALE of zero (AutoCAD: scale to the layout viewport) falls back to
the drawing's DIMSCALE and then 1 instead of 1e-9.
Reading DXF, $DIMDSEP becomes the separator character, as the DIMSTYLE
table already is, so AutoCAD's header variables don't turn into spurious
overrides.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Picking a side of a rectangle or a PLINE segment was rejected with
"Select a line or an arc." because only LINE and ARC entities were
accepted. The picked object is now resolved to the segment under the
cursor: straight polyline segments work like lines and arc segments
like arcs.
Edit > Cut / Copy / Copy with Base Point, View > Zoom > Object, Dimension >
Update, Tools > Draw Order > Bring to Front / Send to Back and the Format >
Layer Tools LAYCUR, LAYFRZ, LAYOFF, LAYLCK and LAYULK did nothing when started
from a menu, toolbar or the command line with nothing selected.
- machines::SelectRun: "Select objects:", then run the command's JSON body on
the picked handles. With a pickfirst selection it runs at once, as before.
It replaces the DIMREASSOCIATE/DIMDISASSOCIATE SelectThen in annotate.rs and
calls the command body directly, so the command records one undo step.
- LAYFRZ/LAYOFF/LAYLCK/LAYULK pick one object ("Select an object on the layer
to be frozen" etc.).
- COPYBASE asks for the base point first, then for objects (skipped with a
pickfirst selection).
- Objects picked at the prompt are deselected afterwards.
- JSON/programmatic calls are unchanged and never prompt.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Annotation (M4):
- TrueType text from system fonts (filled/outlined), shared placement for all text
- MTEXT formatting codes: fonts, heights, colours, under/overline, stacks, wrapping
- Full DIMSTYLE variables, per-dimension overrides, all arrowheads and ticks,
unit formats, tolerances, limits, alternate units, colours by role
- Associative dimensions that follow geometry; DIMREASSOCIATE/DIMDISASSOCIATE
- STYLE/DIMSTYLE management commands, DIMTEDIT, DIMSPACE, TABLE create/edit/merge
Parametric (M9):
- New cadcraft-constraints crate: weighted damped Gauss-Newton solver, conflict
and redundancy detection, expressions, AutoConstrain inference
- All GC*/DC* commands, GEOMCONSTRAINT/DIMCONSTRAINT, PARAMETERS, DELCONSTRAINT,
constraint bar / display settings; re-solve after every edit
Also: MODEL/PAPER status bar toggle, cargo xtask alias, roadmap update
(233/491 menu items, 290 commands).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DIMLINEAR/ALIGNED/RADIUS/DIAMETER/ANGULAR/ARC/ORDINATE/CONTINUE/BASELINE, QDIM, MLEADER, LEADER;
HATCH/GRADIENT/BOUNDARY/REGION with pick-point boundary tracing (planar face walk with islands);
BLOCK/INSERT/ATTDEF/ATTEDIT/WBLOCK/PURGE/BATTMAN; dimension text gaps and horizontal text;
DXF header writer whitelist (correct group codes).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
