With a menu of the in-window bar open, pointing at another title now
closes the open menu and opens that one. With no menu open, pointing
still opens nothing. Clicking the open title, clicking elsewhere, Esc
or choosing an item close the menu as before.
The bar now draws its titles first, then opens the hovered title's menu
if another bar menu is open, then draws the menus. egui 0.36's MenuBar
has no hover switching of its own.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Add a Turkish catalog (tr.tsv, 1,330 rows): the union of the existing
catalogs, four menu headings (Ölçülendirme for the Dimension menu, Ölçü for
the object) and single-form counts, since a Turkish noun stays singular after
a number. No marked UI literal falls back to English. Prompts read "… girin"
for Enter and "… belirtin" for Specify; clickable keywords (Top, Zero, Bottom,
_tan to, nX/nXP) keep the spelling the engine accepts.
Register the language (Preference::Turkish, `tr`, Türkçe) and add locale,
preference, count, menu-heading, live-switch, dialog and font tests. Docs,
README and ATTRIBUTION list it; the translation is AI-assisted, the running
app was reviewed by a native speaker, and line-by-line proofreading is still
to do.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Tools > Express Tools > Break-line Symbol draws one polyline from the first point to the second with a zigzag break symbol at a picked location (the midpoint on Enter), as AutoCAD's Express Tool does. Size scales the symbol (times DIMSCALE), Extension runs the line past both points, and Block takes a block of the drawing whose two points on the Defpoints layer mark where the line meets the symbol. The built-in symbol is our own geometry. One undo step; the options are remembered for the session.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Covers the Hatch and Gradient dialog, the Block Editor, REFEDIT, multileader
editing, the Options selection settings, the MTEXT editor and recent files.
The Swedish catalog now has every key of the Ukrainian reference catalog.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Selection cycling: a click over overlapping objects lists them, Shift+Space steps through them (fixes#1143, fixes#1145)
* canvas: keep viewport_content's doc comment on it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(render): keep filled highlight dash anchors stable
* outline test: as_chunks for clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Inquiry: SHAPES reports closed-shape geometry facts
`shapes` is a read-only command that reports, for every closed shape in the
current space (closed polylines, circles, full ellipses, closed splines),
its perimeter, area, centroid, winding, first self-intersection and
coincident vertices, exact with arcs and bulges. It filters and pages like
`entities` and counts other matches under `skipped` with the reason.
`Polyline::centroid` and `polygon_centroid` give the area centroid.
Fixes#1436.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* shapes: cap the quadratic self-intersection test at 4000 edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Properties: a dimension's text height, arrow size, overall scale and precision (#1259)
The Properties palette showed only a dimension's text override and style,
so the only way to change its text height was a new dimension style.
It now shows Text height (DIMTXT), Arrow size (DIMASZ), Dim scale overall
(DIMSCALE) and Precision (DIMDEC) with the values the dimension draws
with. Editing one sets a per-dimension override (DIMOVERRIDE) on the
selected dimensions, as AutoCAD's Properties palette does; the style is
left alone. properties.set takes textHeight, arrowSize, dimScale and
precision for dimensions and refuses bad values before changing anything.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* props: keep DIMOVERRIDE's doc comment on dim_override
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* i18n:Add missing translations for the print dialog and page settings.
* i18n:Add missing translations for the print dialog and page settings.
* i18n(zh): drop rows that repeat existing keys and the unused 'Page setup of'
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The pill under the ViewCube was the text "WCS ⌄". U+2304 is missing from some
UI fonts, so it showed as a box ("WCS □"). The pill now paints the translated
label and a down chevron drawn as lines, in the pill's ink, so it no longer
depends on the font. The catalog key becomes "WCS" in every language; Korean,
which spelled the arrow out as "WCS 선택", is now "WCS" next to the chevron.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
interfaceScale (0.5-3, default 1) in the OPTIONS JSON form and the Display
tab scales every menu, palette, dialog and the command line through egui's
zoom factor, and is kept in the profile.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
ARC advertised "hold Ctrl to switch direction" but the engine never saw modifier
keys: the UI dropped `mods` when building `Input::Point`. PR #407 recorded this as
a known limit.
The UI now writes `Session::ctrl_down` every frame (next to the cursor update, not
only while a command prompts, so previews see it too) and the two ARC paths read it:
- Continue: negating the start tangent makes `arc_sed` pick the mirror arc through
the same two endpoints.
- Center,Start,End: swapping the start/end angles walks the other way around the
same circle; its end-point prompt now carries the same Ctrl hint.
Tests: crates/engine/tests/arc_ctrl_direction.rs.
can_show only asked the installed-font lookups for those two languages, and
both lookups hard-code None on wasm32, where there are no system fonts. The
Korean gate already falls back to a craft-fonts face (korean_font), but the
web build embeds a Jpan CJK face and an Arabic face precisely as the web's
only fonts, so a Chinese or Arabic interface could never be selected on it,
however complete the catalog; the embedded Arabic face was also never added
to the UI font families (the embedded filter only kept Jpan/Han faces).
Give both gates the embedded-face path the Korean one has:
- can_show("zh"/"ar") answers true when this build embeds a Regular face of
Hans/Hant or Arab, in addition to an installed font.
- install_fonts picks embedded faces via embedded_ui_faces: every CJK face
still loads in every language for CJK drawing names (#513), the face of a
zh interface leads (a Japanese face lacks the simplified-only 图 园 测),
and an Arabic interface appends its Arabic face.
Nothing changes for a build without CRAFT_FONTS_DIR (CRAFT_FONTS empty):
Chinese still rides on an installed CJK font and Arabic on an installed one.
AutoCAD's Properties shows a block reference's or text's rotation as it shows
any direction: from ANGBASE, clockwise when ANGDIR is 1 (a block turned 2.23°
shows as 87.77 in a drawing measured clockwise from north). CADCraft showed
the raw angle from +X. Properties and Quick Properties now show it that way
and read a typed rotation back the same way (`AngleSettings::shown`,
`unshown`); properties.set still takes the angle from +X counterclockwise.
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A complete 1,326-entry Hungarian catalog: every key of the Ukrainian reference catalog and the
four menu headings (Méretezés, Rajzolás, Módosítás, Nézet). Written from the meaning of
CADCraft's English strings in general technical drawing vocabulary; no other product's
localization and no other catalog was used. The interface addresses the user informally;
command-line keywords, system variables and osnap tokens stay English.
- Preference::Hungarian (hu); hu-HU and hu_HU.UTF-8 select it. Counts take one form, as a
Hungarian numeral is followed by the singular (plural_ko, plural_forms: 1).
- hu in REPORTED; tests for locales, saved preference and plurals, menu headings, a live
switch, dialogs and the Hungarian letters (ő, ű) in the bundled fonts. No gaps are reported
for Hungarian.
- ATTRIBUTION, README, docs/localization.md, docs/localization-parity.md,
docs/control-protocol.md and the options doc comment.
* Zoom and pan regenerate in the background instead of freezing the window
A rebuild that only the view asks for (a new 2x zoom band, a pan out of the
built area) now runs on a worker thread while the canvas keeps drawing the
previous display list, scaled by the view uniform. The worker builds the list,
converts it to vertex data and creates the GPU buffers, so the frame that swaps
it in only swaps buffers. One build runs at a time; a result from an older
drawing revision is dropped. Edits, the first build and the web build (no
threads) still rebuild synchronously.
ZOOM no longer calls touch(): it changes the view, not the drawing, and the
bumped revision made every typed zoom a full blocking rebuild (wheel zoom
never did). REGEN, REGENALL and layout switches still touch.
ui.screenshot waits (up to 6 s) for a background rebuild so agents capture
the new view; ui.inspect perf reports "building".
On a hatched 12k-entity DWG (~340k primitives) the longest UI stall per zoom
went from 2-4.5 s to 26-64 ms.
Also: cargo fmt of a comment in engine/src/prompt.rs that was failing the fmt
gate on main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cancel a background rebuild when the view moves on
A view that needs a different display list now cancels the build in flight
and starts one for itself, instead of waiting for the outdated build to land
and only then starting the next. A long scroll through many zoom bands builds
only for where it stops: the list lands about one build after the last step
(2.0-2.3 s on a hatched 12k-entity DWG) instead of up to two, and an outdated
build no longer keeps a core busy.
cadcraft_render::Options gains `cancel` (an Arc<AtomicBool>); a set flag stops
the build at the next entity (block contents included) and the hatch sweep at
its next pattern line, returning a partial list the caller discards. The
canvas's Job sets its flag when dropped, so replacing or dropping a job
cancels it; a cancelled worker sends nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* cargo fmt: crates/doc/src/dynblock.rs (fails the fmt gate on main)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Show Thai file names and text in the interface with an installed Thai font
A drawing whose file name is Thai showed boxes in its file tab and in the
window title: the interface loaded one Latin system font (plus a CJK font for
the Chinese interface), and neither has Thai.
install_fonts now also adds an installed Thai font (Thonburi, Leelawadee UI,
Noto Sans Thai, Loma...) after the Latin one, in any interface language, since
file names and drawing text are Thai whatever the interface is in. No font is
bundled; without one installed nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add Korean interface localization and Hangul font support
* Add Arabic (العربية) interface translation
A full ar.tsv catalog for the CAD interface — every menu label, tool,
palette, dialog and status message in the repo's three-column TSV
format, written from the plain meaning of the English with the
Arabic AutoCAD vocabulary its users know (أمر، إزاحة، تدوير، قص،
استدارة، طبقة…), with the six CLDR plural forms for the counts.
Registers ar in LANGUAGES with plural_arabic and the font chain
(Noto Sans Arabic first on Linux, Segoe UI/Tahoma on Windows, Geeza
Pro on macOS) so the UI families paint Arabic.
The shell itself still lays out left-to-right: egui 0.36 has no
global direction switch and no bidi, so mirroring is left for a
later pass; this PR is the catalog, the registry entry and the
fonts.
* i18n: start the Swedish (sv) interface catalog
Header only, not registered yet: the catalog is filled and the language registered in this
branch, translated from the meaning of CADCraft's English strings and reviewed by a native
Swedish speaker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: add Swedish (sv) interface translation
A complete 1,235-entry Swedish catalog: every key of the Spanish catalog, Run Script... and the
four menu headings (Visa, Rita, Måttsättning, Ändra). Written from the meaning of CADCraft's
English strings; no other product's localisation and no other catalog was used. AI-assisted; the
terminology and the running app were reviewed by a native speaker. Command-line keywords, system
variables and osnap tokens stay English.
- Preference::Swedish (sv); sv-SE, sv-FI and sv_SE.UTF-8 select it; one|other plurals (the
English rule).
- sv in REPORTED; tests for locales, saved preference and plurals, menu headings, a live switch,
dialogs and the Swedish letters in the bundled fonts. No gaps are reported for Swedish.
- ATTRIBUTION, README, docs/localization.md, docs/localization-parity.md,
docs/control-protocol.md, the options doc comment and a contributors/people.toml entry for
@holmbom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Chanthawat Kiriyadee <enwuft@icloud.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: huk082 <89136256+huk082@users.noreply.github.com>
Co-authored-by: hasan-sdaif <306196098+hasan-sdaif@users.noreply.github.com>
Co-authored-by: Erik Holmbom <erik.holmbom@icloud.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Show Thai file names and text in the interface with an installed Thai font
A drawing whose file name is Thai showed boxes in its file tab and in the
window title: the interface loaded one Latin system font (plus a CJK font for
the Chinese interface), and neither has Thai.
install_fonts now also adds an installed Thai font (Thonburi, Leelawadee UI,
Noto Sans Thai, Loma...) after the Latin one, in any interface language, since
file names and drawing text are Thai whatever the interface is in. No font is
bundled; without one installed nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add Korean interface localization and Hangul font support
* i18n: start the Swedish (sv) interface catalog
Header only, not registered yet: the catalog is filled and the language registered in this
branch, translated from the meaning of CADCraft's English strings and reviewed by a native
Swedish speaker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: add Swedish (sv) interface translation
A complete 1,235-entry Swedish catalog: every key of the Spanish catalog, Run Script... and the
four menu headings (Visa, Rita, Måttsättning, Ändra). Written from the meaning of CADCraft's
English strings; no other product's localisation and no other catalog was used. AI-assisted; the
terminology and the running app were reviewed by a native speaker. Command-line keywords, system
variables and osnap tokens stay English.
- Preference::Swedish (sv); sv-SE, sv-FI and sv_SE.UTF-8 select it; one|other plurals (the
English rule).
- sv in REPORTED; tests for locales, saved preference and plurals, menu headings, a live switch,
dialogs and the Swedish letters in the bundled fonts. No gaps are reported for Swedish.
- ATTRIBUTION, README, docs/localization.md, docs/localization-parity.md,
docs/control-protocol.md, the options doc comment and a contributors/people.toml entry for
@holmbom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Chanthawat Kiriyadee <enwuft@icloud.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: huk082 <89136256+huk082@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Show Thai file names and text in the interface with an installed Thai font
A drawing whose file name is Thai showed boxes in its file tab and in the
window title: the interface loaded one Latin system font (plus a CJK font for
the Chinese interface), and neither has Thai.
install_fonts now also adds an installed Thai font (Thonburi, Leelawadee UI,
Noto Sans Thai, Loma...) after the Latin one, in any interface language, since
file names and drawing text are Thai whatever the interface is in. No font is
bundled; without one installed nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add Korean interface localization and Hangul font support
---------
Co-authored-by: Chanthawat Kiriyadee <enwuft@icloud.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Double-clicking a viewport to enter MSPACE or sheet to enter PSPACE triggers a primary click on the first click that starts an idle selection window (pending_window). When the second click triggers dbl_primary, the handler executed an early return, leaving pending_window open and rendering an unwanted crossing/window rectangle across the screen. Reset pending_window and drag_window on double clicks and suppress primary click dispatch.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Draw object transparency on screen, in exports and in plots
Transparency was read and saved (entity group 440, layer xdata, ByLayer and
ByBlock) but never drawn. Display lists now carry each object's effective
transparency (its own, its layer's, or the block reference's), and:
- the canvas (GPU and CPU paths), ui.render and PNG/SVG exports blend it;
TRANSPARENCYDISPLAY turns it off on screen and is now on by default, as in
AutoCAD (initial value 1);
- plots draw it only when "Plot transparency" is on: a page setup option
(PAGESETUP `plotTransparency`, a checkbox in the Page Setup Manager and the
Plot dialog), overridable per plot, with PLOTTRANSPARENCYOVERRIDE (0 never,
1 the setting, 2 always). PDF gets /ExtGState alpha, PNG plots blend, SVG
uses opacity. Plots without it are byte-identical to before.
The public DXF Reference has no plot layout flag for plot transparency, so
the option is kept in the session and in JSON, not in DXF/DWG.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Transparency fixes: attributes, PDF overlaps, drag previews
- Attributes draw with their own transparency (their definition's, layer 0
meaning the reference's layer, ByBlock the reference's) instead of the
block reference's.
- PDF plots stroke overlapping transparent objects one by one, so they build
up where they cross as in PNG plots; opaque output is unchanged.
- Drag and rubber-band previews follow TRANSPARENCYDISPLAY.
- Effective transparency is worked out only when it is drawn, reusing the
layer the property lookup already found.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Transparency: one PDF stroke per transparent primitive; opaque rebuilt previews
- PDF plots never batch two transparent primitives into one path. Block and
viewport contents share their reference's handle, so the per-object flush
missed them; each primitive now blends on its own, as in PNG plots and on
screen. Opaque output is unchanged.
- Previews the session rebuilds with the current properties (rubber bands,
copies of objects) are drawn opaque again: they carry CLAYER's
transparency, not the objects'. The GPU drag of the objects themselves
keeps following TRANSPARENCYDISPLAY.
- Tests for attributes on a transparent reference layer, attributes without a
definition, and the drag cache across the TRANSPARENCYDISPLAY toggle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Selection like AutoCAD: colour highlight and the Options Selection tab
Selecting or hovering an object outlined each filled primitive (TrueType
glyphs, dimension and leader arrowheads, solid hatches, wide polylines)
by the rectangle around its triangles, and dashed everything else. A
selected dimension's text became a row of dashed boxes, one per glyph,
and its closed arrowheads small rectangles.
Selected objects are now redrawn in the selection colour: lines solid,
fills filled half see-through (so the lines and text on a highlighted
hatch stay visible), and the whole object reads as selected, text and
arrowheads included. A wipeout is always outlined, since filling it would
hide the drawing under it.
The Options dialog's Selection tab is laid out as AutoCAD's, with the
settings CADCraft can act on, each one AutoCAD's variable, kept in the
user profile:
- Selection modes: noun/verb selection (PICKFIRST), Shift to add
(PICKADD), Object grouping (PICKSTYLE bit 1, now saved in the profile).
- Selection effect color (selectionColor, an interface preference; null
is the theme's).
- Grips: Show grips (GRIPS) and the object selection limit for display of
grips (GRIPOBJLIMIT, 100; 0 no limit): grips are neither drawn nor
picked beyond it.
- Selection preview (SELECTIONPREVIEW): the object under the cursor is
highlighted when a command is active (2) and when none is (1).
- Visual Effect Settings: the selection area effect (SELECTIONAREA,
WINDOWAREACOLOR 150, CROSSINGAREACOLOR 100, SELECTIONAREAOPACITY 25)
and the Selection Preview Filter (PREVIEWFILTER 3: 1 objects on locked
layers, 2 xrefs, 4 tables, 8 multiline text, 16 hatches, 32 groups).
As in AutoCAD these are typed, not on the dialog: HIGHLIGHT (0 shows only
the grips of selected objects; not saved, so every session starts
highlighted), SELECTIONEFFECT (1 the selection colour, 0 dashed lines with
fills outlined along their real boundary) and PREVIEWEFFECT (the preview
dashed 0, thicker 1 or both 2).
Left for later, as CADCraft lacks what they control: lasso, grip tips and
menus, group grips, grips within blocks, associative hatch selection,
command and property preview, PICKDRAG, PICKAUTO and PROPOBJLIMIT.
DisplayList::fill_outlines returns the boundary of the region a filled
primitive covers as closed polylines (edges only one triangle has; the
slab filler's horizontal cuts, which need not line up between trapezoids,
are split at every x on their line and kept where an odd number cover
them), falling back to the bounding box over 600,000 vertices. The GPU
and CPU highlight paths and the drawing comparison overlay share the same
looks.
The new labels have Ukrainian rows (the required catalog); other
languages fall back to English.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: EP995LAB <293597958+EP995LAB@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Selecting or hovering an object outlined each filled primitive (TrueType
glyphs, dimension and leader arrowheads, solid hatches, wide polylines)
by the rectangle around its triangles, and dashed everything else. A
selected dimension's text became a row of dashed boxes, one per glyph,
and its closed arrowheads small rectangles.
Selected objects are now redrawn in the selection colour: lines solid,
fills filled half see-through (so the lines and text on a highlighted
hatch stay visible), and the whole object reads as selected, text and
arrowheads included. A wipeout is always outlined, since filling it would
hide the drawing under it.
The Options dialog's Selection tab is laid out as AutoCAD's, with the
settings CADCraft can act on, each one AutoCAD's variable, kept in the
user profile:
- Selection modes: noun/verb selection (PICKFIRST), Shift to add
(PICKADD), Object grouping (PICKSTYLE bit 1, now saved in the profile).
- Selection effect color (selectionColor, an interface preference; null
is the theme's).
- Grips: Show grips (GRIPS) and the object selection limit for display of
grips (GRIPOBJLIMIT, 100; 0 no limit): grips are neither drawn nor
picked beyond it.
- Selection preview (SELECTIONPREVIEW): the object under the cursor is
highlighted when a command is active (2) and when none is (1).
- Visual Effect Settings: the selection area effect (SELECTIONAREA,
WINDOWAREACOLOR 150, CROSSINGAREACOLOR 100, SELECTIONAREAOPACITY 25)
and the Selection Preview Filter (PREVIEWFILTER 3: 1 objects on locked
layers, 2 xrefs, 4 tables, 8 multiline text, 16 hatches, 32 groups).
As in AutoCAD these are typed, not on the dialog: HIGHLIGHT (0 shows only
the grips of selected objects; not saved, so every session starts
highlighted), SELECTIONEFFECT (1 the selection colour, 0 dashed lines with
fills outlined along their real boundary) and PREVIEWEFFECT (the preview
dashed 0, thicker 1 or both 2).
Left for later, as CADCraft lacks what they control: lasso, grip tips and
menus, group grips, grips within blocks, associative hatch selection,
command and property preview, PICKDRAG, PICKAUTO and PROPOBJLIMIT.
DisplayList::fill_outlines returns the boundary of the region a filled
primitive covers as closed polylines (edges only one triangle has; the
slab filler's horizontal cuts, which need not line up between trapezoids,
are split at every x on their line and kept where an odd number cover
them), falling back to the bounding box over 600,000 vertices. The GPU
and CPU highlight paths and the drawing comparison overlay share the same
looks.
The new labels have Ukrainian rows (the required catalog); other
languages fall back to English.
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
The MTEXT text entry opens a text box on the canvas at the text's location and
width instead of a dialog: font, height, bold, italic, underline, overline,
colour, paragraph alignment, lists, tab and special characters, plus a ruler for
the paragraph's indents and tab stops. Text, per-character formats and paragraph
properties live in engine::mtext_edit (parse and write MTEXT codes, opaque codes
kept verbatim), tested headlessly.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Block Editor: BEDIT, BSAVE, BSAVEAS and BCLOSE for static blocks
BEDIT opens a block definition in the drawing's own tab with its base point
at the origin, and the block's objects are edited with the ordinary commands.
BSAVE writes them back into the definition, so every reference in the drawing
updates (one undo step in the drawing); BSAVEAS saves under a new name;
BCLOSE goes back to the drawing, asking whether to save unsaved changes.
- The drawing waits untouched while the editor is open (blockedit.rs): its
undo history, selection and views come back on BCLOSE. Objects left
unchanged are saved back exactly, so no coordinate drifts.
- Files save the drawing outside the editor; autosave keeps the editor's
unsaved changes in the block; the close/quit prompt's Save puts them into
the block first.
- Right-click a selected block reference: Block Editor. In the editor the
canvas is tinted, the base point is marked, and a bar offers Save Block,
Save Block As and Close Block Editor (also in the right-click menu). The
Block tool set's Block Editor button is now live. BLOCKEDITOR sysvar.
- Layout and paper-space commands are refused while the editor is open; a
block can't be saved to contain a reference to itself.
- Dynamic blocks: their data is kept; the editor says it can't edit their
parameters yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit Block Definition dialog; BEDIT can start a new block
BEDIT typed or started from a menu or the Tool Sets with no block reference
selected opens the Edit Block Definition dialog: the drawing's blocks sorted
by name, a preview and the description. OK opens the Block Editor on the
block named; a name no block has yet starts a new block, which BSAVE creates
(`bedit {name, create: true}`). A selected block reference still opens at
once, and JSON calls never open the dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit Block Definition: centred window, list box; gaps.md F3
The dialog opens centred on the window, the blocks are a full-width list
in a list box of fixed height, and gaps.md F3 mentions the dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* BEDIT: find dynamic block data on the block's BLOCK_RECORD
A dynamic block's ACAD_ENHANCEDBLOCK dictionary hangs off its BLOCK_RECORD
table entry, not the BLOCK entity, so the "parameters are kept" note never
showed for AutoCAD files. Regression test with the data laid out as an
AutoCAD DXF has it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* BEDIT: a dynamic block reference opens its dynamic block
A dynamic block reference with values of its own shows an anonymous block
(`*U12`), so the right-click Block Editor (and BEDIT on a picked or selected
reference) refused it and asked for a name. The anonymous block's record
names its dynamic block in AcDbBlockRepBTag xdata; BEDIT now opens that, as
AutoCAD does. Regression test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Block Editor on the current drawing; opening a drawing with authoring elements offers it
A dynamic block's own drawing (model space with authoring elements: its
block record's ACAD_ENHANCEDBLOCK) opened from the UI asks, as AutoCAD does,
"<file> contains authoring elements. Open in Block Editor?" Yes / No /
Cancel. Yes opens the Block Editor on <Current Drawing>: the drawing's own
objects, edited where they are; BSAVE keeps them, BCLOSE without saving puts
the drawing back. <Current Drawing> heads the Edit Block Definition list.
BSAVEAS is not available there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Block Editor: BEDIT, BSAVE, BSAVEAS and BCLOSE for static blocks
BEDIT opens a block definition in the drawing's own tab with its base point
at the origin, and the block's objects are edited with the ordinary commands.
BSAVE writes them back into the definition, so every reference in the drawing
updates (one undo step in the drawing); BSAVEAS saves under a new name;
BCLOSE goes back to the drawing, asking whether to save unsaved changes.
- The drawing waits untouched while the editor is open (blockedit.rs): its
undo history, selection and views come back on BCLOSE. Objects left
unchanged are saved back exactly, so no coordinate drifts.
- Files save the drawing outside the editor; autosave keeps the editor's
unsaved changes in the block; the close/quit prompt's Save puts them into
the block first.
- Right-click a selected block reference: Block Editor. In the editor the
canvas is tinted, the base point is marked, and a bar offers Save Block,
Save Block As and Close Block Editor (also in the right-click menu). The
Block tool set's Block Editor button is now live. BLOCKEDITOR sysvar.
- Layout and paper-space commands are refused while the editor is open; a
block can't be saved to contain a reference to itself.
- Dynamic blocks: their data is kept; the editor says it can't edit their
parameters yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit Block Definition dialog; BEDIT can start a new block
BEDIT typed or started from a menu or the Tool Sets with no block reference
selected opens the Edit Block Definition dialog: the drawing's blocks sorted
by name, a preview and the description. OK opens the Block Editor on the
block named; a name no block has yet starts a new block, which BSAVE creates
(`bedit {name, create: true}`). A selected block reference still opens at
once, and JSON calls never open the dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit Block Definition: centred window, list box; gaps.md F3
The dialog opens centred on the window, the blocks are a full-width list
in a list box of fixed height, and gaps.md F3 mentions the dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* BEDIT: find dynamic block data on the block's BLOCK_RECORD
A dynamic block's ACAD_ENHANCEDBLOCK dictionary hangs off its BLOCK_RECORD
table entry, not the BLOCK entity, so the "parameters are kept" note never
showed for AutoCAD files. Regression test with the data laid out as an
AutoCAD DXF has it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* BEDIT: a dynamic block reference opens its dynamic block
A dynamic block reference with values of its own shows an anonymous block
(`*U12`), so the right-click Block Editor (and BEDIT on a picked or selected
reference) refused it and asked for a name. The anonymous block's record
names its dynamic block in AcDbBlockRepBTag xdata; BEDIT now opens that, as
AutoCAD does. Regression test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Block Editor: BEDIT, BSAVE, BSAVEAS and BCLOSE for static blocks
BEDIT opens a block definition in the drawing's own tab with its base point
at the origin, and the block's objects are edited with the ordinary commands.
BSAVE writes them back into the definition, so every reference in the drawing
updates (one undo step in the drawing); BSAVEAS saves under a new name;
BCLOSE goes back to the drawing, asking whether to save unsaved changes.
- The drawing waits untouched while the editor is open (blockedit.rs): its
undo history, selection and views come back on BCLOSE. Objects left
unchanged are saved back exactly, so no coordinate drifts.
- Files save the drawing outside the editor; autosave keeps the editor's
unsaved changes in the block; the close/quit prompt's Save puts them into
the block first.
- Right-click a selected block reference: Block Editor. In the editor the
canvas is tinted, the base point is marked, and a bar offers Save Block,
Save Block As and Close Block Editor (also in the right-click menu). The
Block tool set's Block Editor button is now live. BLOCKEDITOR sysvar.
- Layout and paper-space commands are refused while the editor is open; a
block can't be saved to contain a reference to itself.
- Dynamic blocks: their data is kept; the editor says it can't edit their
parameters yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* BEDIT: find dynamic block data on the block's BLOCK_RECORD
A dynamic block's ACAD_ENHANCEDBLOCK dictionary hangs off its BLOCK_RECORD
table entry, not the BLOCK entity, so the "parameters are kept" note never
showed for AutoCAD files. Regression test with the data laid out as an
AutoCAD DXF has it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* BEDIT: a dynamic block reference opens its dynamic block
A dynamic block reference with values of its own shows an anonymous block
(`*U12`), so the right-click Block Editor (and BEDIT on a picked or selected
reference) refused it and asked for a name. The anonymous block's record
names its dynamic block in AcDbBlockRepBTag xdata; BEDIT now opens that, as
AutoCAD does. Regression test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Dynamic blocks: read parameters and actions from AutoCAD files
A dynamic block's evaluation graph (kept as foreign data since #528) is read
into a typed model, `cadcraft_doc::dynblock`, without changing the kept
data: parameters (linear with value sets, point, visibility states,
lookup, base point; polar, XY, rotation, alignment and flip by geometry)
and actions (stretch with its frame and moved vertices, lookup tables;
move, scale, rotate, flip, array, polar stretch by kind), each with its
graph id and the parameters it follows.
- `blocks.dynamic {name}` returns the model as JSON (handles as hex);
`blocks.list` marks dynamic blocks.
- Counts and values come from the file: capped by the groups present,
non-finite numbers and missing members skipped.
- Tests: a synthetic DOOR block (visibility, linear list, stretch, lookup),
its survival through a save, damaged data, and the engine commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: their values and custom properties
A dynamic block reference's extension dictionary says which dynamic block it
shows (AcDbBlockRepresentation ▸ AcDbRepData) and the values it was given
(AppDataCache ▸ ACAD_ENHANCEDBLOCKDATA, one XRECORD per parameter graph id).
`dynblock::reference` reads them; a reference to the dynamic block itself
has the block's values.
- `dynblock::custom_properties`: the Properties palette's Custom section, in
parameter order, only parameters shown in Properties: visibility state,
lookup value worked out from the lookup tables (their "no match" name, e.g.
Custom, when the inputs match no row), distances and point positions in
drawing units (block units × the reference's scale), with the choices of
each (states, lookup values, a distance's list).
- Properties: a dynamic block reference shows its dynamic block's name
instead of its anonymous block's, and a read-only Custom section.
- `blocks.reference {handle}` returns the definition, values and properties.
- Tests: synthetic references (own values, an anonymous block scaled 2, a
width no lookup row has), survival through a save, the engine command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: change the visibility state
Choosing a visibility state (or a lookup value whose tables set only
visibility states) in Properties ▸ Custom, or `blocks.reference.set
{handle, name, value}`, changes a dynamic block reference as AutoCAD does:
- The reference gets a new anonymous block: its current one with the
state's objects shown and the parameter's other objects hidden (matched
to the dynamic block's objects by their AcDbBlockRepETag element tags).
The old anonymous block goes when nothing else uses it.
- AutoCAD's link data is written: the new block's record carries
AcDbBlockRepBTag (the dynamic block's record), copied objects keep their
element tags, and the reference's AcDbBlockRepresentation data records the
value (an existing value record is updated; a new one copies another
reference's record for the same parameter when there is one).
- An attribute whose definition the state hides is written hidden (60).
- Changes CADCraft can't make yet (distances, positions, lookups that set
them) are refused with a message and change nothing; Properties shows
only what can change as a dropdown (`CustomProperty::editable`).
- Tests: the synthetic DOOR references (own values and an anonymous block),
survival through a save, refusals, and the engine command with undo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: distances, positions, stretch and move actions, lookup chaining
Linear distances (snapped to their value sets) and point positions can be
changed; the stretch and move actions that follow them run (listed vertices
or whole objects, multiplier and angle offset), parameters in an action's
selection are carried along, associative hatches refill from their
stretched outlines and the reference's attributes move with their
definitions. Lookup tables run both ways (a changed input gives its table's
lookup value, which sets the other tables' inputs). Connections are read in
either group order. Checked against AutoCAD's own references (*U10, *U12).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: record changes in the history as AutoCAD does; full value data for new references
A changed reference's ACAD_ENHANCEDBLOCKHISTORY says what was done to it: a
visibility state or lookup value by property name, a distance or position as
the drag of its grips (GRIPLOC, how far each grip is from where the dynamic
block has it). A reference that had no data gets a record for everything
other references of the same dynamic block have, with its own values.
Templates come only from references of the same dynamic block; anonymous
copies have no units; boundary reactors follow the copies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block history: record only the grips a change moves
AutoCAD's history holds the user's own drags; a grip that only moved with
another parameter (a stretch carrying it) gets no entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block history: a distance by name, as typed in Properties
AutoCAD records a distance typed in Properties as the parameter's name and
value in block units (1071 id, 300 Distance2, 40 40.0), replacing drags of
its grips; positions stay grip drags.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DWG: dynamic block lookup parameters keep their name and lookup action
AutoCAD writes a lookup parameter's subclass marker as
AcDbBlockLookUpParameter; the DWG bridge reads AcDbBlockLookupParameter and
matches it exactly, so the parameter's name (303) and lookup action (94)
were lost in DWG files and AutoCAD's lookups stopped working (a visibility
change no longer resized the block). The bridge DXF now uses its spelling.
Found by driving AutoCAD on CADCraft's output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic blocks: carried parameter points are in a stretch frame where the block has them
AutoCAD evaluates actions from the dynamic block itself, so a parameter point
another action has moved out of a stretch frame still follows it. Testing the
current position instead changed a stretched label's width when its
visibility changed (Distance2 183.75 became 184.45; AutoCAD keeps 183.75).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block grips: show and drag a dynamic reference's grips as AutoCAD does
A selected dynamic block reference shows its grips: an arrow at each end of a
distance, a square at a position, a down-pointing triangle for a visibility
or lookup list, only those its visibility state lists. Dragging an arrow
changes the distance along the parameter (snapped to its values; a typed
number sets it), a square moves the position, a list grip offers its
choices; actions and lookups follow, with a live preview.
doc: dynblock::grips, drag_grip; grip objects by graph id.
engine: blocks.reference.grips, blocks.reference.grip, Session::start_dyn_grip.
ui: canvas dynamic grips (GRIPDYNCOLOR-like token), list popup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: read the shared DOOR fixture with LF line ends whatever the checkout gives
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic blocks: carried parameter points are in a stretch frame where the block has them
AutoCAD evaluates actions from the dynamic block itself, so a parameter point
another action has moved out of a stretch frame still follows it. Testing the
current position instead changed a stretched label's width when its
visibility changed (Distance2 183.75 became 184.45; AutoCAD keeps 183.75).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic grips: Ukrainian labels for the new commands; copy the hot grip instead of cloning
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Dynamic blocks: read parameters and actions from AutoCAD files
A dynamic block's evaluation graph (kept as foreign data since #528) is read
into a typed model, `cadcraft_doc::dynblock`, without changing the kept
data: parameters (linear with value sets, point, visibility states,
lookup, base point; polar, XY, rotation, alignment and flip by geometry)
and actions (stretch with its frame and moved vertices, lookup tables;
move, scale, rotate, flip, array, polar stretch by kind), each with its
graph id and the parameters it follows.
- `blocks.dynamic {name}` returns the model as JSON (handles as hex);
`blocks.list` marks dynamic blocks.
- Counts and values come from the file: capped by the groups present,
non-finite numbers and missing members skipped.
- Tests: a synthetic DOOR block (visibility, linear list, stretch, lookup),
its survival through a save, damaged data, and the engine commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: their values and custom properties
A dynamic block reference's extension dictionary says which dynamic block it
shows (AcDbBlockRepresentation ▸ AcDbRepData) and the values it was given
(AppDataCache ▸ ACAD_ENHANCEDBLOCKDATA, one XRECORD per parameter graph id).
`dynblock::reference` reads them; a reference to the dynamic block itself
has the block's values.
- `dynblock::custom_properties`: the Properties palette's Custom section, in
parameter order, only parameters shown in Properties: visibility state,
lookup value worked out from the lookup tables (their "no match" name, e.g.
Custom, when the inputs match no row), distances and point positions in
drawing units (block units × the reference's scale), with the choices of
each (states, lookup values, a distance's list).
- Properties: a dynamic block reference shows its dynamic block's name
instead of its anonymous block's, and a read-only Custom section.
- `blocks.reference {handle}` returns the definition, values and properties.
- Tests: synthetic references (own values, an anonymous block scaled 2, a
width no lookup row has), survival through a save, the engine command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: change the visibility state
Choosing a visibility state (or a lookup value whose tables set only
visibility states) in Properties ▸ Custom, or `blocks.reference.set
{handle, name, value}`, changes a dynamic block reference as AutoCAD does:
- The reference gets a new anonymous block: its current one with the
state's objects shown and the parameter's other objects hidden (matched
to the dynamic block's objects by their AcDbBlockRepETag element tags).
The old anonymous block goes when nothing else uses it.
- AutoCAD's link data is written: the new block's record carries
AcDbBlockRepBTag (the dynamic block's record), copied objects keep their
element tags, and the reference's AcDbBlockRepresentation data records the
value (an existing value record is updated; a new one copies another
reference's record for the same parameter when there is one).
- An attribute whose definition the state hides is written hidden (60).
- Changes CADCraft can't make yet (distances, positions, lookups that set
them) are refused with a message and change nothing; Properties shows
only what can change as a dropdown (`CustomProperty::editable`).
- Tests: the synthetic DOOR references (own values and an anonymous block),
survival through a save, refusals, and the engine command with undo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: distances, positions, stretch and move actions, lookup chaining
Linear distances (snapped to their value sets) and point positions can be
changed; the stretch and move actions that follow them run (listed vertices
or whole objects, multiplier and angle offset), parameters in an action's
selection are carried along, associative hatches refill from their
stretched outlines and the reference's attributes move with their
definitions. Lookup tables run both ways (a changed input gives its table's
lookup value, which sets the other tables' inputs). Connections are read in
either group order. Checked against AutoCAD's own references (*U10, *U12).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: record changes in the history as AutoCAD does; full value data for new references
A changed reference's ACAD_ENHANCEDBLOCKHISTORY says what was done to it: a
visibility state or lookup value by property name, a distance or position as
the drag of its grips (GRIPLOC, how far each grip is from where the dynamic
block has it). A reference that had no data gets a record for everything
other references of the same dynamic block have, with its own values.
Templates come only from references of the same dynamic block; anonymous
copies have no units; boundary reactors follow the copies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block history: record only the grips a change moves
AutoCAD's history holds the user's own drags; a grip that only moved with
another parameter (a stretch carrying it) gets no entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block history: a distance by name, as typed in Properties
AutoCAD records a distance typed in Properties as the parameter's name and
value in block units (1071 id, 300 Distance2, 40 40.0), replacing drags of
its grips; positions stay grip drags.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DWG: dynamic block lookup parameters keep their name and lookup action
AutoCAD writes a lookup parameter's subclass marker as
AcDbBlockLookUpParameter; the DWG bridge reads AcDbBlockLookupParameter and
matches it exactly, so the parameter's name (303) and lookup action (94)
were lost in DWG files and AutoCAD's lookups stopped working (a visibility
change no longer resized the block). The bridge DXF now uses its spelling.
Found by driving AutoCAD on CADCraft's output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic blocks: carried parameter points are in a stretch frame where the block has them
AutoCAD evaluates actions from the dynamic block itself, so a parameter point
another action has moved out of a stretch frame still follows it. Testing the
current position instead changed a stretched label's width when its
visibility changed (Distance2 183.75 became 184.45; AutoCAD keeps 183.75).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Dynamic blocks: read parameters and actions from AutoCAD files
A dynamic block's evaluation graph (kept as foreign data since #528) is read
into a typed model, `cadcraft_doc::dynblock`, without changing the kept
data: parameters (linear with value sets, point, visibility states,
lookup, base point; polar, XY, rotation, alignment and flip by geometry)
and actions (stretch with its frame and moved vertices, lookup tables;
move, scale, rotate, flip, array, polar stretch by kind), each with its
graph id and the parameters it follows.
- `blocks.dynamic {name}` returns the model as JSON (handles as hex);
`blocks.list` marks dynamic blocks.
- Counts and values come from the file: capped by the groups present,
non-finite numbers and missing members skipped.
- Tests: a synthetic DOOR block (visibility, linear list, stretch, lookup),
its survival through a save, damaged data, and the engine commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: their values and custom properties
A dynamic block reference's extension dictionary says which dynamic block it
shows (AcDbBlockRepresentation ▸ AcDbRepData) and the values it was given
(AppDataCache ▸ ACAD_ENHANCEDBLOCKDATA, one XRECORD per parameter graph id).
`dynblock::reference` reads them; a reference to the dynamic block itself
has the block's values.
- `dynblock::custom_properties`: the Properties palette's Custom section, in
parameter order, only parameters shown in Properties: visibility state,
lookup value worked out from the lookup tables (their "no match" name, e.g.
Custom, when the inputs match no row), distances and point positions in
drawing units (block units × the reference's scale), with the choices of
each (states, lookup values, a distance's list).
- Properties: a dynamic block reference shows its dynamic block's name
instead of its anonymous block's, and a read-only Custom section.
- `blocks.reference {handle}` returns the definition, values and properties.
- Tests: synthetic references (own values, an anonymous block scaled 2, a
width no lookup row has), survival through a save, the engine command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: change the visibility state
Choosing a visibility state (or a lookup value whose tables set only
visibility states) in Properties ▸ Custom, or `blocks.reference.set
{handle, name, value}`, changes a dynamic block reference as AutoCAD does:
- The reference gets a new anonymous block: its current one with the
state's objects shown and the parameter's other objects hidden (matched
to the dynamic block's objects by their AcDbBlockRepETag element tags).
The old anonymous block goes when nothing else uses it.
- AutoCAD's link data is written: the new block's record carries
AcDbBlockRepBTag (the dynamic block's record), copied objects keep their
element tags, and the reference's AcDbBlockRepresentation data records the
value (an existing value record is updated; a new one copies another
reference's record for the same parameter when there is one).
- An attribute whose definition the state hides is written hidden (60).
- Changes CADCraft can't make yet (distances, positions, lookups that set
them) are refused with a message and change nothing; Properties shows
only what can change as a dropdown (`CustomProperty::editable`).
- Tests: the synthetic DOOR references (own values and an anonymous block),
survival through a save, refusals, and the engine command with undo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DWG: dynamic block lookup parameters keep their name and lookup action
AutoCAD writes a lookup parameter's subclass marker as
AcDbBlockLookUpParameter; the DWG bridge reads AcDbBlockLookupParameter and
matches it exactly, so the parameter's name (303) and lookup action (94)
were lost in DWG files and AutoCAD's lookups stopped working (a visibility
change no longer resized the block). The bridge DXF now uses its spelling.
Found by driving AutoCAD on CADCraft's output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Dynamic blocks: read parameters and actions from AutoCAD files
A dynamic block's evaluation graph (kept as foreign data since #528) is read
into a typed model, `cadcraft_doc::dynblock`, without changing the kept
data: parameters (linear with value sets, point, visibility states,
lookup, base point; polar, XY, rotation, alignment and flip by geometry)
and actions (stretch with its frame and moved vertices, lookup tables;
move, scale, rotate, flip, array, polar stretch by kind), each with its
graph id and the parameters it follows.
- `blocks.dynamic {name}` returns the model as JSON (handles as hex);
`blocks.list` marks dynamic blocks.
- Counts and values come from the file: capped by the groups present,
non-finite numbers and missing members skipped.
- Tests: a synthetic DOOR block (visibility, linear list, stretch, lookup),
its survival through a save, damaged data, and the engine commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic block references: their values and custom properties
A dynamic block reference's extension dictionary says which dynamic block it
shows (AcDbBlockRepresentation ▸ AcDbRepData) and the values it was given
(AppDataCache ▸ ACAD_ENHANCEDBLOCKDATA, one XRECORD per parameter graph id).
`dynblock::reference` reads them; a reference to the dynamic block itself
has the block's values.
- `dynblock::custom_properties`: the Properties palette's Custom section, in
parameter order, only parameters shown in Properties: visibility state,
lookup value worked out from the lookup tables (their "no match" name, e.g.
Custom, when the inputs match no row), distances and point positions in
drawing units (block units × the reference's scale), with the choices of
each (states, lookup values, a distance's list).
- Properties: a dynamic block reference shows its dynamic block's name
instead of its anonymous block's, and a read-only Custom section.
- `blocks.reference {handle}` returns the definition, values and properties.
- Tests: synthetic references (own values, an anonymous block scaled 2, a
width no lookup row has), survival through a save, the engine command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DWG: dynamic block lookup parameters keep their name and lookup action
AutoCAD writes a lookup parameter's subclass marker as
AcDbBlockLookUpParameter; the DWG bridge reads AcDbBlockLookupParameter and
matches it exactly, so the parameter's name (303) and lookup action (94)
were lost in DWG files and AutoCAD's lookups stopped working (a visibility
change no longer resized the block). The bridge DXF now uses its spelling.
Found by driving AutoCAD on CADCraft's output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Dynamic blocks: read parameters and actions from AutoCAD files
A dynamic block's evaluation graph (kept as foreign data since #528) is read
into a typed model, `cadcraft_doc::dynblock`, without changing the kept
data: parameters (linear with value sets, point, visibility states,
lookup, base point; polar, XY, rotation, alignment and flip by geometry)
and actions (stretch with its frame and moved vertices, lookup tables;
move, scale, rotate, flip, array, polar stretch by kind), each with its
graph id and the parameters it follows.
- `blocks.dynamic {name}` returns the model as JSON (handles as hex);
`blocks.list` marks dynamic blocks.
- Counts and values come from the file: capped by the groups present,
non-finite numbers and missing members skipped.
- Tests: a synthetic DOOR block (visibility, linear list, stretch, lookup),
its survival through a save, damaged data, and the engine commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DWG: dynamic block lookup parameters keep their name and lookup action
AutoCAD writes a lookup parameter's subclass marker as
AcDbBlockLookUpParameter; the DWG bridge reads AcDbBlockLookupParameter and
matches it exactly, so the parameter's name (303) and lookup action (94)
were lost in DWG files and AutoCAD's lookups stopped working (a visibility
change no longer resized the block). The bridge DXF now uses its spelling.
Found by driving AutoCAD on CADCraft's output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic blocks: a work budget on the record cursor, so counts promising missing groups can't make nested loops rescan a hostile record (with regression test)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
With Windows set to show no animations (Settings ▸ Accessibility ▸ Visual
effects ▸ Animation effects), dialogs and menus still faded in and wheel
input glided. All of that motion is egui's default behaviour, and nothing
asked the operating system.
- crates/ui-egui/src/animation.rs: AnimationPref (System, On, Off). Off sets
egui's animation_time to 0 and scroll_animation to none (window, menu,
tooltip and popup fades, collapsing sections, scroll bars, scroll-to
glides), hands each wheel notch to scroll areas whole, and lets
Cmd/Ctrl+wheel zoom reach its zoom in one step.
- System, the default, follows the OS live: UISettings::AnimationsEnabled on
Windows, NSWorkspace's Reduce motion on macOS, the XDG Desktop Portal's
reduced-motion (then GNOME's enable-animations) on Linux and the BSDs,
prefers-reduced-motion on the web.
- View ▸ Accessibility ▸ Animation Effects ▸ Use System Setting / On / Off,
the same choice in Options ▸ Display, and `ui.animations`, `options` and
`ui.set` {"animations"}; `ui.inspect` reports whether animations show.
Drafting behaviour is untouched: tracking's acquisition pause, the
time-sensitive right-click, previews, the caret blink, realtime pan and
zoom. Plain wheel zoom already moved a whole notch per frame (#692).
macOS and Linux are compile-checked (clippy -D warnings for
aarch64-apple-darwin and x86_64-unknown-linux-gnu), not run.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
