Covers the Hatch and Gradient dialog, the Block Editor, REFEDIT, multileader
editing, the Options selection settings, the MTEXT editor and recent files.
The Swedish catalog now has every key of the Ukrainian reference catalog.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
## 변경 내용
- entities 명령에 selected 불리언 필터를 추가해 현재 공간의 선택 객체만 조회
- 기존 종류·레이어·영역 필터와 결합하고 필터 적용 후 페이지 처리
- MCP query_entities 스키마와 명령·제어 프로토콜 문서에 옵션 공개
- 빈 선택, 중복·오래된 핸들, 다른 공간 객체, 잘못된 입력 및 조회 전후 상태 보존 회귀 테스트 추가
## 검증
- cargo xtask ci 6단계 통과: fmt, clippy, 테스트 2,012개, assets, layers, wasm
- 별도 .NET 클라이언트와 실제 헤드리스 엔진의 localhost 통합 검증 통과
- 실제 데스크톱 UI 조작 및 고객 DWG 왕복 검증은 수행하지 않음
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
At a point prompt with a base point, holding Shift turns ortho on when
ORTHOMODE is off and off when it is on; releasing it restores the setting.
ORTHOMODE itself is never changed. While the override turns ortho on, polar
tracking is off, as with ortho on.
The UI already passed the Shift state to Session::snap_cursor (for POLARMODE
bit 8's Shift to acquire), so the change is in the engine only: snap_cursor
applies the override to its copy of the settings. Window corners (ZOOM
Window) and prompts without a base point are unaffected.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Selection cycling: a click over overlapping objects lists them, Shift+Space steps through them (fixes#1143, fixes#1145)
* canvas: keep viewport_content's doc comment on it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamic blocks: a grip drag previews the reference in its own colours
The preview of a dynamic grip drag is the reference re-evaluated at the
cursor. It was drawn in the preview colour, fills left out, so on a filled
label the text was white on white. Commands can now give preview objects
with their own properties (`Interactive::preview_objects`, drawn under the
rubber band); the grip drag gives the block's objects with the properties
they draw with in the reference (layer 0 on its layer, ByBlock its
colour, linetype, lineweight and transparency) and its attributes with their
definitions', fills included in the block's order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preview: the rubber band is grip blue over objects previewed in their own colours
Over a block previewed in its own colours the rubber band and tick marks,
in the current layer's colour, could vanish on its fill (white on white).
They are drawn in the grip blue there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* fix(render): keep filled highlight dash anchors stable
* outline test: as_chunks for clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Inquiry: SHAPES reports closed-shape geometry facts
`shapes` is a read-only command that reports, for every closed shape in the
current space (closed polylines, circles, full ellipses, closed splines),
its perimeter, area, centroid, winding, first self-intersection and
coincident vertices, exact with arcs and bulges. It filters and pages like
`entities` and counts other matches under `skipped` with the reason.
`Polyline::centroid` and `polygon_centroid` give the area centroid.
Fixes#1436.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* shapes: cap the quadratic self-intersection test at 4000 edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* feat(engine): support AUDITCTL system variable and .adt log generation (gaps F4)
* audit: write the .adt log only beside a saved drawing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: a dimension's text height, arrow size, overall scale and precision (#1259)
The Properties palette showed only a dimension's text override and style,
so the only way to change its text height was a new dimension style.
It now shows Text height (DIMTXT), Arrow size (DIMASZ), Dim scale overall
(DIMSCALE) and Precision (DIMDEC) with the values the dimension draws
with. Editing one sets a per-dimension override (DIMOVERRIDE) on the
selected dimensions, as AutoCAD's Properties palette does; the style is
left alone. properties.set takes textHeight, arrowSize, dimScale and
precision for dimensions and refuses bad values before changing anything.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* props: keep DIMOVERRIDE's doc comment on dim_override
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* i18n:Add missing translations for the print dialog and page settings.
* i18n:Add missing translations for the print dialog and page settings.
* i18n(zh): drop rows that repeat existing keys and the unused 'Page setup of'
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Wrap format_angle to zero when rounding reaches a full turn
Found while testing crates/engine/src/units.rs:63-66,87-88,102
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* units: wrap a full turn by the formatted value, so ties round as {:.*} does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A short guide for people porting add-ons: what runs today (LISP routines
and startup files, .scr scripts, .pgp alias files, the JSON control
channel, MCP, cadcraft-cli), what doesn't yet (Visual LISP ActiveX, DCL,
reactors, compiled plug-ins), and where each is documented. The README's
automation section links to it.
The pill under the ViewCube was the text "WCS ⌄". U+2304 is missing from some
UI fonts, so it showed as a box ("WCS □"). The pill now paints the translated
label and a down chevron drawn as lines, in the pill's ink, so it no longer
depends on the font. The catalog key becomes "WCS" in every language; Korean,
which spelled the arrow out as "WCS 선택", is now "WCS" next to the chevron.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A help request is not a failure: --version already goes to stdout with
exit 0, and now --help, -h and help do the same. Bare cadcraft-cli
keeps reporting on stderr with exit 1, like git.
Fixes#1525
ID always printed Z = 0, DIST's Delta Z and angle from the XY plane were
0, and LIST printed Z = 0 for lines, circles, arcs and polyline vertices,
though the drawing kept every Z: a topographic drawing's levels could not
be read in CADCraft.
Points reach these commands in 2D, so the Z is that of what is drawn at
the point, as AutoCAD reports a snapped point's: the object a pick finds
there (a point, a 3D line or 3D polyline interpolated, a polyline's
elevation, down Z for a mirrored one, a circle, arc, text, block or the
plane of a 3D face), else the current elevation (ELEVATION). A Z given
with a JSON point wins. DIST gives the 3D distance, Delta Z and the angle
from the XY plane; LIST the Z of lines, circles, arcs and text, a line's
3D length and deltas, and a polyline's elevation.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
interfaceScale (0.5-3, default 1) in the OPTIONS JSON form and the Display
tab scales every menu, palette, dialog and the command line through egui's
zoom factor, and is kept in the profile.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Found while testing crates/io/src/svg.rs:50-60 (export_list: viewBox, stroke-width, circle r and coordinates all formatted with {:.6})
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Found while testing crates/engine/src/cmd/modify.rs:584-597 (offset_kind, EntityKind::Ellipse branch)
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Found while testing crates/engine/src/cmd/table/breaks.rs:167 (parse_csv), fed by read_link at :236 (String::from_utf8_lossy, no BOM removal)
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
LAYOFF ended after a single pick, so turning off five layers took five command
invocations. AutoCAD's Layer Off keeps prompting: you pick object after object
and the command ends on Enter or Esc only.
`SelectRun` grows a `repeat` mode next to the existing single-pick and plain
select modes: `SelectRun::repeat(..)` acts on every pick, seeds the next prompt
straight away, and finishes on Enter (or Esc through the usual cancel path).
The non-repeating paths are untouched — a repeating run must not let one pick
end the command, so `sel.single` is disabled for it and Enter is handled before
the selection machine's own keywords.
The whole run stays a single undo step, because the command body is still
called once per pick but the running command records one step, as before.
Tests: `crates/engine/tests/layoff_repeat.rs`
cargo test -p cadcraft-engine --test layoff_repeat -> 4 passed
- keeps asking until Enter, two layers off, one undo takes both back
- Esc ends it and keeps what was already turned off
- an empty pick ("0 found") keeps it running
- pickfirst and JSON calls are unchanged
Co-authored-by: kostyk348 <kostyk348@users.noreply.github.com>
ARC advertised "hold Ctrl to switch direction" but the engine never saw modifier
keys: the UI dropped `mods` when building `Input::Point`. PR #407 recorded this as
a known limit.
The UI now writes `Session::ctrl_down` every frame (next to the cursor update, not
only while a command prompts, so previews see it too) and the two ARC paths read it:
- Continue: negating the start tangent makes `arc_sed` pick the mirror arc through
the same two endpoints.
- Center,Start,End: swapping the start/end angles walks the other way around the
same circle; its end-point prompt now carries the same Ctrl hint.
Tests: crates/engine/tests/arc_ctrl_direction.rs.
Found while testing crates/render/src/units.rs:139-160 (format_linear, unit 3 and 4 arms) and feet_inches at :101
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Slabs ran between vertex rows and paired the active edges by their
order at the slab's middle, so two edges crossing inside a slab (a
bowtie, two loops crossing) were paired across the crossing and the
trapezoids covered the wrong side of it. A slab with such a crossing is
now cut again at that y and each part paired on its own, under a cut
budget so hostile input stays bounded. Tests check coverage against an
even-odd parity oracle for a bowtie, an off-centre bowtie, two crossing
loops and the plain cases; the three crossing cases fail on main.
Claude-Session: https://claude.ai/code/session_011K1peyrh5MdZ6ttHkVq8Gh
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
can_show only asked the installed-font lookups for those two languages, and
both lookups hard-code None on wasm32, where there are no system fonts. The
Korean gate already falls back to a craft-fonts face (korean_font), but the
web build embeds a Jpan CJK face and an Arabic face precisely as the web's
only fonts, so a Chinese or Arabic interface could never be selected on it,
however complete the catalog; the embedded Arabic face was also never added
to the UI font families (the embedded filter only kept Jpan/Han faces).
Give both gates the embedded-face path the Korean one has:
- can_show("zh"/"ar") answers true when this build embeds a Regular face of
Hans/Hant or Arab, in addition to an installed font.
- install_fonts picks embedded faces via embedded_ui_faces: every CJK face
still loads in every language for CJK drawing names (#513), the face of a
zh interface leads (a Japanese face lacks the simplified-only 图 园 测),
and an Arabic interface appends its Arabic face.
Nothing changes for a build without CRAFT_FONTS_DIR (CRAFT_FONTS empty):
Chinese still rides on an installed CJK font and Arabic on an installed one.
AutoCAD's Properties shows a block reference's or text's rotation as it shows
any direction: from ANGBASE, clockwise when ANGDIR is 1 (a block turned 2.23°
shows as 87.77 in a drawing measured clockwise from north). CADCraft showed
the raw angle from +X. Properties and Quick Properties now show it that way
and read a typed rotation back the same way (`AngleSettings::shown`,
`unshown`); properties.set still takes the angle from +X counterclockwise.
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
AutoCAD writes $ANGBASE in degrees (a drawing whose angles run clockwise from
north has 90.0); CADCraft read and wrote it as radians, so such a drawing's
angle base came in as 90 radians (about 116.6 degrees), turning typed angles,
polar tracking and angles shown in Properties. The reader now converts to
radians (the variable's unit), the writer back, and the DWG reader's hand-off
of the value in DXF form gives degrees.
Co-authored-by: Cody Vogt <18035288+codyvogt@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: convert to an image warns about the entities it can't draw (fixes#1208)
* CLI: the undrawn-entities warning lists its counts like the skipped-records one
make_block erased the selected objects for every `keep` value except
"retain" and only converted them for "convert", so a misspelt value such
as "retian" removed the objects from the drawing without a reference to
the new block.
`keep` is now parsed into an enum before anything is touched; a value
that is not documented is an error naming the three accepted values. The
documented values are accepted in any case. BLOCK and -BLOCK share the
check.
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
