diff --git a/crates/engine/src/lib.rs b/crates/engine/src/lib.rs
index 21b3a4691..847f036b7 100644
--- a/crates/engine/src/lib.rs
+++ b/crates/engine/src/lib.rs
@@ -330,6 +330,9 @@ pub struct Settings {
     /// DYNPICOORDS = 1: second and next points typed into Dynamic Input are absolute instead of
     /// relative to the last point (the default).
     pub dynpi_absolute: bool,
+    /// DYNPROMPT: Dynamic Input shows the prompt beside the cursor, and Down Arrow opens the
+    /// prompt's options there (on by default).
+    pub dynprompt: bool,
     pub lwdisplay: bool,
     pub transparency_display: bool,
     pub selection_cycling: bool,
@@ -386,6 +389,7 @@ impl Default for Settings {
             dynmode: true,
             dynpi_cartesian: false,
             dynpi_absolute: false,
+            dynprompt: true,
             lwdisplay: false,
             transparency_display: false,
             selection_cycling: false,
diff --git a/crates/engine/src/snap.rs b/crates/engine/src/snap.rs
index 1d1134b44..54ce34aa8 100644
--- a/crates/engine/src/snap.rs
+++ b/crates/engine/src/snap.rs
@@ -224,6 +224,12 @@ pub(crate) fn gather(
                     cands.push((mode::INS, i.insert.xy()));
                     cands.extend(i.attribs.iter().filter(|a| !a.invisible).map(|a| (mode::INS, a.text.justify_point())));
                 }
+                EntityKind::AttDef(a) => cands.push((mode::INS, a.text.justify_point())),
+                // A multileader: its text's insertion point, or its block content's.
+                EntityKind::MLeader(m) => {
+                    cands.extend(m.text.iter().map(|t| (mode::INS, t.insert.xy())));
+                    cands.extend(m.block.iter().map(|b| (mode::INS, b.insert.xy())));
+                }
                 _ => {}
             }
         }
@@ -436,11 +442,15 @@ impl Sink<'_> {
             }
             self.near.push(p);
         }
-        if osmode & mode::GCEN != 0
-            && let EntityKind::LwPolyline(pl) = kind
-            && pl.closed
-        {
-            let pts = cadcraft_geom::Polyline { vertices: pl.vertices.clone(), closed: true }.tessellate(self.aperture / 10.0);
+        if osmode & mode::GCEN != 0 {
+            // The centroid of the area a closed polyline or spline encloses.
+            let pts = match kind {
+                EntityKind::LwPolyline(pl) if pl.closed => {
+                    cadcraft_geom::Polyline { vertices: pl.vertices.clone(), closed: true }.tessellate(self.aperture / 10.0)
+                }
+                EntityKind::Spline(s) if s.closed => s.tessellate(1e-3),
+                _ => Vec::new(),
+            };
             if let Some(c) = centroid(&pts) {
                 self.cands.push((mode::GCEN, at(c)));
             }
diff --git a/crates/engine/src/sysvars.rs b/crates/engine/src/sysvars.rs
index 3a31c8839..ad815a268 100644
--- a/crates/engine/src/sysvars.rs
+++ b/crates/engine/src/sysvars.rs
@@ -27,6 +27,7 @@ const SESSION_VARS: &[&str] = &[
     "DYNMODE",
     "DYNPIFORMAT",
     "DYNPICOORDS",
+    "DYNPROMPT",
     "LWDISPLAY",
     "SELECTSIMILARMODE",
     "OBJECTISOLATIONMODE",
@@ -73,6 +74,7 @@ pub fn get(s: &Session, name: &str) -> Option<Value> {
         "DYNMODE" => json!(i32::from(st.dynmode)),
         "DYNPIFORMAT" => json!(i32::from(st.dynpi_cartesian)),
         "DYNPICOORDS" => json!(i32::from(st.dynpi_absolute)),
+        "DYNPROMPT" => json!(i32::from(st.dynprompt)),
         "LWDISPLAY" => json!(i32::from(st.lwdisplay)),
         "SELECTSIMILARMODE" => json!(st.selectsimilarmode),
         // Isolation is temporary: hidden objects show again when the drawing is reopened.
@@ -210,6 +212,7 @@ pub fn set(s: &mut Session, name: &str, v: &Value) -> Result<()> {
         "DYNMODE" => st.dynmode = as_bool(v).ok_or_else(bad)?,
         "DYNPIFORMAT" => st.dynpi_cartesian = as_bool(v).ok_or_else(bad)?,
         "DYNPICOORDS" => st.dynpi_absolute = as_bool(v).ok_or_else(bad)?,
+        "DYNPROMPT" => st.dynprompt = as_bool(v).ok_or_else(bad)?,
         "LWDISPLAY" => st.lwdisplay = as_bool(v).ok_or_else(bad)?,
         "SELECTSIMILARMODE" => st.selectsimilarmode = as_i(v).filter(|b| (0..=255).contains(b)).ok_or_else(bad)? as u32,
         "OBJECTISOLATIONMODE" => match as_i(v) {
diff --git a/crates/engine/tests/dyn_input.rs b/crates/engine/tests/dyn_input.rs
new file mode 100644
index 000000000..1e3f9c988
--- /dev/null
+++ b/crates/engine/tests/dyn_input.rs
@@ -0,0 +1,40 @@
+//! Dynamic Input (#519): DYNPROMPT and the options a prompt offers at the cursor.
+
+use cadcraft_engine::{Input, Session, sysvars};
+use serde_json::json;
+
+#[test]
+fn dynprompt_is_a_setting_on_by_default() {
+    let mut s = Session::new();
+    assert!(s.settings.dynprompt);
+    assert_eq!(sysvars::get(&s, "DYNPROMPT"), Some(json!(1)));
+    s.execute("setvar", &json!({"name": "dynprompt", "value": 0})).unwrap();
+    assert!(!s.settings.dynprompt);
+    assert_eq!(sysvars::get(&s, "dynprompt"), Some(json!(0)));
+    s.cmdline("setvar dynprompt 1").unwrap();
+    assert!(s.settings.dynprompt);
+    assert!(s.execute("setvar", &json!({"name": "DYNPROMPT", "value": "x"})).is_err());
+    assert!(s.settings.dynprompt);
+}
+
+#[test]
+fn an_option_picked_at_the_cursor_answers_the_prompt() {
+    // The options menu lists the prompt's keywords and sends the picked one, as a click on it
+    // at the command line does.
+    let mut s = Session::new();
+    s.cmdline("circle").unwrap();
+    let kws = s.current_prompt().unwrap().keywords;
+    let three_p = kws.iter().find(|k| k.eq_ignore_ascii_case("3P")).cloned().expect("CIRCLE offers 3P");
+    s.input(Input::Keyword(three_p)).unwrap();
+    for p in [[0.0, 0.0], [10.0, 0.0], [5.0, 5.0]] {
+        s.input(Input::Point(cadcraft_geom::Vec2::new(p[0], p[1]))).unwrap();
+    }
+    assert!(s.running.is_none());
+    let doc = s.doc().unwrap();
+    let circle = doc.model.iter().find_map(|e| match &e.kind {
+        cadcraft_doc::EntityKind::Circle(c) => Some(c.clone()),
+        _ => None,
+    });
+    let c = circle.expect("a three-point circle");
+    assert!((c.center.x - 5.0).abs() < 1e-9 && c.center.y.abs() < 1e-9 && (c.radius - 5.0).abs() < 1e-9, "{c:?}");
+}
diff --git a/crates/engine/tests/snaps_more.rs b/crates/engine/tests/snaps_more.rs
new file mode 100644
index 000000000..44d727e99
--- /dev/null
+++ b/crates/engine/tests/snaps_more.rs
@@ -0,0 +1,67 @@
+//! The remaining object snaps (#519, gaps.md U8): Insertion on attribute definitions and
+//! multileaders, Geometric Center on closed splines, and no Midpoint on closed curves.
+
+use cadcraft_doc::{EntityKind, Space};
+use cadcraft_engine::Session;
+use cadcraft_engine::snap::{self, mode};
+use cadcraft_geom::Vec2;
+use serde_json::json;
+
+/// The snap of `modes` near `p` (a hair off it, inside a 0.1 aperture).
+fn snap_at(s: &Session, p: Vec2, modes: u32) -> Option<(Vec2, u32)> {
+    snap::osnap(s.doc().unwrap(), &Space::Model, p + Vec2::new(0.02, -0.01), 0.1, modes, None, false).map(|h| (h.point, h.mode))
+}
+
+fn near(a: Option<(Vec2, u32)>, p: Vec2, m: u32) -> bool {
+    a.is_some_and(|(q, k)| k == m && q.dist(p) < 1e-6)
+}
+
+#[test]
+fn insertion_snaps_to_attribute_definitions() {
+    let mut s = Session::new();
+    s.execute("attdef", &json!({"tag": "PART", "default": "A-1", "at": [3, 4]})).unwrap();
+    assert!(near(snap_at(&s, Vec2::new(3.0, 4.0), mode::INS), Vec2::new(3.0, 4.0), mode::INS));
+}
+
+#[test]
+fn insertion_snaps_to_a_multileader_text() {
+    let mut s = Session::new();
+    s.execute("mleader", &json!({"points": [[0, 0], [10, 5]], "text": "NOTE"})).unwrap();
+    let at = s
+        .doc()
+        .unwrap()
+        .model
+        .iter()
+        .find_map(|e| match &e.kind {
+            EntityKind::MLeader(m) => m.text.as_ref().map(|t| t.insert.xy()),
+            _ => None,
+        })
+        .expect("a multileader with text");
+    assert!(near(snap_at(&s, at, mode::INS), at, mode::INS));
+}
+
+#[test]
+fn geometric_center_of_a_closed_spline() {
+    let mut s = Session::new();
+    // A closed fit spline symmetric about (5,5): its centroid is the centre.
+    s.execute("spline", &json!({"fit": [[0, 5], [5, 0], [10, 5], [5, 10]], "closed": true})).unwrap();
+    let c = Vec2::new(5.0, 5.0);
+    let hit = snap::osnap(s.doc().unwrap(), &Space::Model, c + Vec2::new(0.05, 0.0), 0.5, mode::GCEN, None, false).expect("a geometric center");
+    assert_eq!(hit.mode, mode::GCEN);
+    assert!(hit.point.dist(c) < 1e-3, "{:?}", hit.point);
+    // An open spline has none.
+    let mut s = Session::new();
+    s.execute("spline", &json!({"fit": [[0, 5], [5, 0], [10, 5], [5, 10]]})).unwrap();
+    assert!(snap::osnap(s.doc().unwrap(), &Space::Model, c, 0.5, mode::GCEN, None, false).is_none());
+}
+
+#[test]
+fn closed_curves_have_no_midpoint() {
+    // As in AutoCAD: Midpoint works on arcs and elliptical arcs, not on a full circle or ellipse.
+    let mut s = Session::new();
+    s.cmdline("circle 0,0 5").unwrap();
+    s.cmdline("ellipse 20,0 30,0 3").unwrap();
+    for p in [Vec2::new(-5.0, 0.0), Vec2::new(5.0, 0.0), Vec2::new(10.0, 0.0), Vec2::new(30.0, 0.0), Vec2::new(20.0, 3.0)] {
+        assert_eq!(snap_at(&s, p, mode::MID), None, "{p:?}");
+    }
+}
diff --git a/crates/ui-egui/src/canvas.rs b/crates/ui-egui/src/canvas.rs
index 8fdc391f1..e1931ea76 100644
--- a/crates/ui-egui/src/canvas.rs
+++ b/crates/ui-egui/src/canvas.rs
@@ -688,7 +688,7 @@ pub fn show(app: &mut CadApp, ui: &mut egui::Ui) {
             && let Some(e) = crate::dyninput::parse(&app.cmd.buffer, &f)
             && e.first_locked().is_some()
         {
-            eff = crate::dyninput::constrain(&e, &f, eff);
+            eff = crate::dyninput::constrain(&e, &f, eff, app.cmd.second_locked());
             app.canvas.snap = None;
             app.canvas.track = None;
         }
@@ -705,6 +705,18 @@ pub fn show(app: &mut CadApp, ui: &mut egui::Ui) {
         app.session.cursor_deferred = None;
     }
 
+    // A click on the Dynamic Input options menu picks the keyword; elsewhere it closes the menu.
+    let mut picked = false;
+    if pressed_primary && app.cmd.options.is_some() {
+        match hover_pos.and_then(|h| app.cmd.option_at(h)) {
+            Some(k) => {
+                crate::cmdline::pick_option(app, k);
+                picked = true;
+            }
+            None => app.cmd.options = None,
+        }
+    }
+    let pressed_primary = pressed_primary && !picked;
     // Clicks.
     if inside
         && pressed_primary
@@ -1101,13 +1113,30 @@ fn draw_crosshair(app: &CadApp, p: &egui::Painter, rect: Rect, at: Pos2, pickbox
 /// The Dynamic Input tooltip beside the cursor, styled like the command line. At a point prompt
 /// it shows the pair of value boxes, a view of the command-line text (see [`crate::dyninput`]);
 /// otherwise the prompt with what is being typed, or the live distance and angle.
-fn dynamic_input(app: &CadApp, p: &egui::Painter, at: Pos2) {
+fn dynamic_input(app: &mut CadApp, p: &egui::Painter, hover: Pos2) {
+    app.cmd.option_rows.clear();
+    // While the options menu is open the tooltip stays where it opened, so the menu can be reached.
+    let at = match app.cmd.options {
+        Some(_) => *app.cmd.options_anchor.get_or_insert(hover),
+        None => {
+            app.cmd.options_anchor = None;
+            hover
+        }
+    };
     let Some(prompt) = app.session.current_prompt() else { return };
+    // DYNPROMPT = 0: no prompt beside the cursor (the value boxes stay).
+    let show_prompt = app.session.settings.dynprompt;
+    let options = show_prompt && !prompt.keywords.is_empty();
     if let Some(f) = crate::cmdline::dyn_frame(app)
         && let Some(e) = crate::dyninput::parse(&app.cmd.buffer, &f)
         && let Some(c) = app.canvas.cursor
     {
-        dynamic_input_boxes(p, at, crate::i18n::t(&prompt.message), &f, &e, c);
+        let message = if show_prompt { crate::i18n::t(&prompt.message) } else { "" };
+        let r = dynamic_input_boxes(p, at, message, &f, &e, c, app.cmd.second_locked(), options);
+        options_menu(app, p, r, hover);
+        return;
+    }
+    if !show_prompt {
         return;
     }
     let mut text = crate::i18n::t(&prompt.message).to_string();
@@ -1130,8 +1159,54 @@ fn dynamic_input(app: &CadApp, p: &egui::Painter, at: Pos2) {
     }
     let t = Tokens::get();
     let galley = p.layout_no_wrap(text, crate::theme::small(), t.text);
-    let r = tooltip_frame(p, at, galley.size() + vec2(12.0, 8.0));
+    let hint = if options { OPTIONS_HINT_W } else { 0.0 };
+    let r = tooltip_frame(p, at, galley.size() + vec2(12.0 + hint, 8.0));
     p.galley(r.min + vec2(6.0, 4.0), galley, t.text);
+    if options {
+        options_hint(p, r);
+    }
+    options_menu(app, p, r, hover);
+}
+
+/// Room for the down-arrow sign that a prompt has options.
+const OPTIONS_HINT_W: f32 = 14.0;
+
+/// The down-arrow sign at the right end of the tooltip `r`: the prompt has options, and Down
+/// Arrow lists them.
+fn options_hint(p: &egui::Painter, r: Rect) {
+    let t = Tokens::get();
+    let c = pos2(r.right() - OPTIONS_HINT_W / 2.0 - 2.0, r.center().y + 1.0);
+    p.add(Shape::convex_polygon(vec![pos2(c.x - 4.0, c.y - 2.5), pos2(c.x + 4.0, c.y - 2.5), pos2(c.x, c.y + 2.5)], t.text_dim, Stroke::NONE));
+}
+
+/// The options menu under the tooltip `r` (DYNPROMPT): one row per keyword, the highlighted one
+/// marked; the rows are kept for clicks.
+fn options_menu(app: &mut CadApp, p: &egui::Painter, r: Rect, hover: Pos2) {
+    let Some(mut menu) = app.cmd.options.clone() else { return };
+    let t = Tokens::get();
+    let font = crate::theme::small();
+    let rows: Vec<_> = menu.keywords.iter().map(|k| p.layout_no_wrap(k.clone(), font.clone(), t.text)).collect();
+    let row_h = rows.iter().map(|g| g.size().y).fold(12.0, f32::max) + 6.0;
+    let w = rows.iter().map(|g| g.size().x).fold(60.0, f32::max) + 28.0;
+    let h = row_h * rows.len() as f32 + 4.0;
+    let m = Rect::from_min_size(pos2(r.left(), r.bottom() + 2.0), vec2(w, h));
+    p.rect_filled(m, 3.0, t.cmd_bg);
+    p.rect_stroke(m, 3.0, Stroke::new(1.0, t.cmd_border), egui::StrokeKind::Inside);
+    let row_at = |i: usize| Rect::from_min_size(pos2(m.left() + 2.0, m.top() + 2.0 + row_h * i as f32), vec2(w - 4.0, row_h));
+    // The row under the pointer is the highlighted one.
+    if let Some(i) = (0..menu.keywords.len()).find(|i| row_at(*i).contains(hover)) {
+        menu.index = i;
+        app.cmd.options = Some(menu.clone());
+    }
+    for (i, (g, k)) in rows.into_iter().zip(&menu.keywords).enumerate() {
+        let row = row_at(i);
+        if i == menu.index {
+            p.rect_filled(row, 2.0, t.cmd_keyword_hover);
+            p.circle_filled(pos2(row.left() + 9.0, row.center().y), 2.5, t.accent);
+        }
+        p.galley(pos2(row.left() + 20.0, row.center().y - g.size().y / 2.0), g, t.text);
+        app.cmd.option_rows.push((row, k.clone()));
+    }
 }
 
 /// The tooltip background, matching the command line bar; returns its rectangle.
@@ -1147,7 +1222,17 @@ fn tooltip_frame(p: &egui::Painter, at: Pos2, size: egui::Vec2) -> Rect {
 /// text colour, a locked value (a separator typed after it) gets a lock, the active box gets the
 /// accent outline, and open boxes show the cursor's live value, dimmed. Values measured from the
 /// last point are marked with `@`.
-fn dynamic_input_boxes(p: &egui::Painter, at: Pos2, message: &str, f: &crate::dyninput::Frame, e: &crate::dyninput::Entry<'_>, cursor: Vec2) {
+#[allow(clippy::too_many_arguments)]
+fn dynamic_input_boxes(
+    p: &egui::Painter,
+    at: Pos2,
+    message: &str,
+    f: &crate::dyninput::Frame,
+    e: &crate::dyninput::Entry<'_>,
+    cursor: Vec2,
+    second_locked: bool,
+    options: bool,
+) -> Rect {
     use crate::dyninput::Format;
     let t = Tokens::get();
     let font = crate::theme::small();
@@ -1170,7 +1255,13 @@ fn dynamic_input_boxes(p: &egui::Painter, at: Pos2, message: &str, f: &crate::dy
             e.first_locked().is_some(),
             !e.split,
         ),
-        (label_second, if e.second.is_empty() { live_second } else { e.second.to_owned() }, !e.second.is_empty(), false, e.split),
+        (
+            label_second,
+            if e.second.is_empty() { live_second } else { e.second.to_owned() },
+            !e.second.is_empty(),
+            second_locked,
+            e.split && !second_locked,
+        ),
     ];
 
     let msg = p.layout_no_wrap(message.to_owned(), font.clone(), t.text_dim);
@@ -1194,7 +1285,11 @@ fn dynamic_input_boxes(p: &egui::Painter, at: Pos2, message: &str, f: &crate::dy
     for (label, _, bw, _, _) in &laid {
         w += gap + label.size().x + 3.0 + bw;
     }
-    let r = tooltip_frame(p, at, vec2(w + pad, box_h + 2.0 * pad - 2.0));
+    let hint = if options { OPTIONS_HINT_W } else { 0.0 };
+    let r = tooltip_frame(p, at, vec2(w + pad + hint, box_h + 2.0 * pad - 2.0));
+    if options {
+        options_hint(p, r);
+    }
     let cy = r.center().y;
     let mut x = r.left() + pad;
     let (msg_w, msg_h) = (msg.size().x, msg.size().y);
@@ -1223,6 +1318,7 @@ fn dynamic_input_boxes(p: &egui::Painter, at: Pos2, message: &str, f: &crate::dy
         }
         x += bw;
     }
+    r
 }
 
 /// A small padlock, drawn in code: body plus shackle.
diff --git a/crates/ui-egui/src/cmdline.rs b/crates/ui-egui/src/cmdline.rs
index 0ad42187d..ce371bb25 100644
--- a/crates/ui-egui/src/cmdline.rs
+++ b/crates/ui-egui/src/cmdline.rs
@@ -23,6 +23,14 @@ pub struct CmdLine {
     pub expanded: bool,
     /// Dragging the history's top edge: (pointer y, line count) when the drag started.
     resize_from: Option<(f32, usize)>,
+    /// The Dynamic Input options menu at the cursor (Down Arrow at a prompt with keywords).
+    pub options: Option<crate::dyninput::OptionsMenu>,
+    /// The text whose second Dynamic Input value Tab locked; the lock holds while it is unchanged.
+    locked_second: Option<String>,
+    /// Where the options menu's rows were drawn last frame (screen), for clicks on them.
+    pub option_rows: Vec<(Rect, String)>,
+    /// Where the Dynamic Input tooltip stays while the options menu is open.
+    pub options_anchor: Option<Pos2>,
 }
 
 /// The most history lines the command line shows above its bar.
@@ -73,6 +81,11 @@ fn tab(app: &mut CadApp) {
         && let Some(sep) = crate::dyninput::tab_separator(&app.cmd.buffer, &f)
     {
         app.cmd.buffer.push(sep);
+    } else if let Some(f) = dyn_frame(app)
+        && crate::dyninput::can_lock_second(&app.cmd.buffer, &f)
+    {
+        // Both values typed: Tab locks the second one as well.
+        app.cmd.locked_second = Some(app.cmd.buffer.clone());
     } else if let Some((id, _)) = suggestions(&app.cmd.buffer).first() {
         app.cmd.buffer = id.clone();
     }
@@ -109,6 +122,53 @@ impl CmdLine {
             self.typed_since_selection = true;
         }
     }
+
+    /// Tab locked the second Dynamic Input value and nothing was typed since.
+    pub fn second_locked(&self) -> bool {
+        self.locked_second.as_deref() == Some(self.buffer.as_str())
+    }
+
+    /// The options menu row under `at` (screen), if the menu is open.
+    pub fn option_at(&self, at: Pos2) -> Option<String> {
+        self.options.as_ref()?;
+        self.option_rows.iter().find(|(r, _)| r.contains(at)).map(|(_, k)| k.clone())
+    }
+}
+
+/// Keep the options menu only while its prompt is on screen with Dynamic Input and DYNPROMPT on.
+fn options_still_fit(app: &mut CadApp) {
+    let st = &app.session.settings;
+    let on = st.dynmode && st.dynprompt && app.canvas.hot_grips.is_empty();
+    let kws = app.session.current_prompt().map(|p| p.keywords).unwrap_or_default();
+    if app.cmd.options.as_ref().is_some_and(|m| !on || !m.fits(&kws)) {
+        app.cmd.options = None;
+    }
+}
+
+/// Down Arrow at a prompt with keywords (Dynamic Input on, DYNPROMPT on, not browsing the
+/// history): open the options menu at the cursor, or move its highlight. `false` when the key is
+/// left for the history.
+fn options_key(app: &mut CadApp, step: isize) -> bool {
+    if let Some(m) = app.cmd.options.as_mut() {
+        m.step(step);
+        return true;
+    }
+    let st = &app.session.settings;
+    if step < 0 || !st.dynmode || !st.dynprompt || app.cmd.history_pos.is_some() || !app.canvas.hot_grips.is_empty() {
+        return false;
+    }
+    let kws = app.session.current_prompt().map(|p| p.keywords).unwrap_or_default();
+    app.cmd.options = crate::dyninput::OptionsMenu::open(&kws);
+    app.cmd.options.is_some()
+}
+
+/// Send a keyword picked from the options menu, as a click on it at the command line does.
+pub fn pick_option(app: &mut CadApp, keyword: String) {
+    app.cmd.options = None;
+    app.cmd.buffer.clear();
+    if let Err(e) = app.session.input(Input::Keyword(keyword)) {
+        app.session.echo(e.to_string());
+    }
 }
 
 /// Whether Backspace should erase the selection instead of editing the command line. The key
@@ -140,7 +200,39 @@ pub fn keyboard(app: &mut CadApp, ctx: &egui::Context) {
     app.cmd.watch_selection(&selection);
     let mac = ctx.os() == egui::os::OperatingSystem::Mac;
     let text_prompt = app.session.current_prompt().is_some_and(|p| p.accept.text && !p.accept.point && !p.accept.number);
+    options_still_fit(app);
     for ev in events {
+        // The options menu takes the arrows, Enter and Escape; typing closes it.
+        if app.cmd.options.is_some() {
+            let space = matches!(&ev, egui::Event::Text(t) if t == " ") && !text_prompt;
+            match &ev {
+                _ if space => {
+                    if let Some(k) = app.cmd.options.as_ref().and_then(|m| m.current()).map(str::to_owned) {
+                        pick_option(app, k);
+                    }
+                    continue;
+                }
+                egui::Event::Key { key: Key::Enter, pressed: true, .. } => {
+                    if let Some(k) = app.cmd.options.as_ref().and_then(|m| m.current()).map(str::to_owned) {
+                        pick_option(app, k);
+                    }
+                    continue;
+                }
+                egui::Event::Key { key: Key::Escape, pressed: true, .. } => {
+                    app.cmd.options = None;
+                    continue;
+                }
+                egui::Event::Key { key: Key::ArrowUp, pressed: true, modifiers, .. } if !modifiers.any() => {
+                    options_key(app, -1);
+                    continue;
+                }
+                egui::Event::Key { key: Key::ArrowDown | Key::ArrowUp, pressed: true, .. } => {}
+                // Space arrives as a key and as text; the text picks.
+                egui::Event::Key { key: Key::Space, .. } => {}
+                egui::Event::Text(_) | egui::Event::Key { pressed: true, .. } => app.cmd.options = None,
+                _ => {}
+            }
+        }
         match ev {
             egui::Event::Text(t) => {
                 if t == "\t" {
@@ -182,7 +274,9 @@ pub fn keyboard(app: &mut CadApp, ctx: &egui::Context) {
                     }
                 }
                 Key::ArrowDown if !modifiers.any() => {
-                    if let Some(p) = app.cmd.history_pos {
+                    if !options_key(app, 1)
+                        && let Some(p) = app.cmd.history_pos
+                    {
                         let np = p + 1;
                         if np >= app.cmd.history.len() {
                             app.cmd.history_pos = None;
@@ -217,6 +311,7 @@ pub fn submit(app: &mut CadApp) {
         }
     }
     let text = std::mem::take(&mut app.cmd.buffer);
+    app.cmd.locked_second = None;
     app.cmd.history_pos = None;
     if !text.trim().is_empty() && app.session.running.is_none() {
         app.cmd.history.push(text.clone());
diff --git a/crates/ui-egui/src/dialogs.rs b/crates/ui-egui/src/dialogs.rs
index b2a9e165a..f6a2dba8b 100644
--- a/crates/ui-egui/src/dialogs.rs
+++ b/crates/ui-egui/src/dialogs.rs
@@ -115,6 +115,8 @@ fn dsettings(app: &mut CadApp, ctx: &egui::Context, open: &mut bool) {
                     ui.radio_value(&mut s.dynpi_absolute, false, crate::tl!("Relative"));
                     ui.radio_value(&mut s.dynpi_absolute, true, crate::tl!("Absolute"));
                 });
+                // DYNPROMPT: the prompt and its options (Down Arrow) beside the cursor.
+                ui.checkbox(&mut s.dynprompt, crate::tl!("Show command prompting near the crosshairs"));
             });
         });
         ui.checkbox(&mut s.orthomode, crate::tl!("Ortho (F8)"));
diff --git a/crates/ui-egui/src/dyninput.rs b/crates/ui-egui/src/dyninput.rs
index 708ca5ecf..229ba1739 100644
--- a/crates/ui-egui/src/dyninput.rs
+++ b/crates/ui-egui/src/dyninput.rs
@@ -5,12 +5,15 @@
 //!   default to polar as in AutoCAD; DYNPIFORMAT = 1 makes them Cartesian).
 //! - `40,` locks X = 40 and moves to Y; `40<` locks the distance and moves to the angle. A locked
 //!   value holds the cursor.
-//! - Tab types the separator for the format on show, so `40` Tab `90` reads `40<90`.
+//! - Tab types the separator for the format on show, so `40` Tab `90` reads `40<90`; Tab after the
+//!   second value locks it too (both boxes show a lock and the cursor sits on the point).
 //! - Enter sends the entry with `@` in front when it is measured from the last point (relative is
 //!   the default; DYNPICOORDS = 1 makes it absolute), and fills an empty box from the cursor.
 //! - A plain number and Enter stays direct distance entry; `@`/`#` entries, keywords and command
 //!   names go through untouched.
 //!
+//! - Down Arrow at a prompt with options (DYNPROMPT on) lists them at the cursor ([`OptionsMenu`]).
+//!
 //! Scripts, the control channel and MCP never pass through here, so they keep the plain
 //! command-line rules.
 
@@ -133,10 +136,25 @@ pub fn tab_separator(text: &str, frame: &Frame) -> Option<char> {
     parse(text, frame).filter(|e| !e.split).map(|e| e.format.separator())
 }
 
-/// Hold the cursor to the locked first value.
-pub fn constrain(entry: &Entry<'_>, frame: &Frame, p: Vec2) -> Vec2 {
+/// Whether Tab locks the second value too: both values are typed.
+pub fn can_lock_second(text: &str, frame: &Frame) -> bool {
+    parse(text, frame).is_some_and(|e| e.split && e.first_locked().is_some() && e.second_value().is_some())
+}
+
+/// Hold the cursor to the locked values: the first one once a separator follows it, and both
+/// when Tab has locked the second one too (`second_locked`), which pins the cursor to the point.
+pub fn constrain(entry: &Entry<'_>, frame: &Frame, p: Vec2, second_locked: bool) -> Vec2 {
     let Some(v) = entry.first_locked() else { return p };
     let o = frame.origin();
+    if second_locked && let Some(w) = entry.second_value() {
+        let q = match entry.format {
+            Format::Cartesian => o + Vec2::new(v, w),
+            Format::Polar => o + Vec2::from_angle(w) * v,
+        };
+        if q.is_finite() {
+            return q;
+        }
+    }
     match entry.format {
         Format::Cartesian => Vec2::new(o.x + v, p.y),
         Format::Polar => {
@@ -157,7 +175,7 @@ pub fn complete(entry: &Entry<'_>, frame: &Frame, cursor: Vec2, last: Vec2) -> O
     if !entry.split {
         return None;
     }
-    let (live_first, live_second) = frame.live(entry.format, constrain(entry, frame, cursor));
+    let (live_first, live_second) = frame.live(entry.format, constrain(entry, frame, cursor, false));
     let first = entry.first_locked().unwrap_or(live_first);
     let second = entry.second_value().unwrap_or(live_second);
     if frame.relative() && frame.base == Some(last) {
@@ -174,6 +192,39 @@ pub fn complete(entry: &Entry<'_>, frame: &Frame, cursor: Vec2, last: Vec2) -> O
     p.is_finite().then(|| format!("#{},{}", p.x, p.y))
 }
 
+/// The Dynamic Input options menu (DYNPROMPT): Down Arrow at a prompt with keywords lists them
+/// at the cursor; the arrows move the highlight and Enter or a click sends the keyword.
+#[derive(Clone, Debug, PartialEq, Eq)]
+pub struct OptionsMenu {
+    /// The prompt's keywords, as they were when the menu opened.
+    pub keywords: Vec<String>,
+    /// The highlighted keyword.
+    pub index: usize,
+}
+
+impl OptionsMenu {
+    /// The menu for a prompt's keywords, or `None` when it has none.
+    pub fn open(keywords: &[String]) -> Option<Self> {
+        (!keywords.is_empty()).then(|| OptionsMenu { keywords: keywords.to_vec(), index: 0 })
+    }
+    /// Move the highlight down (`step` = 1) or up (-1), wrapping around.
+    pub fn step(&mut self, step: isize) {
+        let n = self.keywords.len();
+        if n > 0 {
+            self.index = (self.index % n).checked_add_signed(step).unwrap_or(n - 1) % n;
+        }
+    }
+    /// The highlighted keyword.
+    pub fn current(&self) -> Option<&str> {
+        self.keywords.get(self.index).map(String::as_str)
+    }
+    /// Whether the menu still belongs to a prompt with these keywords (it closes when the prompt
+    /// moves on).
+    pub fn fits(&self, keywords: &[String]) -> bool {
+        self.keywords == keywords
+    }
+}
+
 #[cfg(test)]
 mod tests {
     use super::*;
@@ -244,12 +295,46 @@ mod tests {
         let base = Vec2::new(1.0, 1.0);
         let f = second_point(base);
         let e = parse("5<", &f).unwrap();
-        assert!(close(Some(constrain(&e, &f, Vec2::new(1.0, 100.0))), Vec2::new(1.0, 6.0)));
+        assert!(close(Some(constrain(&e, &f, Vec2::new(1.0, 100.0), false)), Vec2::new(1.0, 6.0)));
         let e = parse("3,", &f).unwrap();
-        assert_eq!(constrain(&e, &f, Vec2::new(-7.0, 9.0)), Vec2::new(4.0, 9.0));
+        assert_eq!(constrain(&e, &f, Vec2::new(-7.0, 9.0), false), Vec2::new(4.0, 9.0));
         // Still typing the first value: nothing is locked yet.
         let e = parse("3", &f).unwrap();
-        assert_eq!(constrain(&e, &f, Vec2::new(-7.0, 9.0)), Vec2::new(-7.0, 9.0));
+        assert_eq!(constrain(&e, &f, Vec2::new(-7.0, 9.0), false), Vec2::new(-7.0, 9.0));
+    }
+
+    #[test]
+    fn tab_locks_the_second_value_and_pins_the_cursor() {
+        let base = Vec2::new(1.0, 1.0);
+        let f = second_point(base);
+        // Only once both values are typed.
+        assert!(!can_lock_second("5", &f));
+        assert!(!can_lock_second("5<", &f));
+        assert!(can_lock_second("5<90", &f));
+        assert!(can_lock_second("3,4", &f));
+        let e = parse("5<90", &f).unwrap();
+        // Unlocked, the typed angle doesn't hold the cursor; locked, the cursor sits on the point.
+        assert!(close(Some(constrain(&e, &f, Vec2::new(100.0, 1.0), false)), Vec2::new(6.0, 1.0)));
+        assert!(close(Some(constrain(&e, &f, Vec2::new(100.0, 1.0), true)), Vec2::new(1.0, 6.0)));
+        let e = parse("3,4", &f).unwrap();
+        assert_eq!(constrain(&e, &f, Vec2::new(-7.0, 9.0), true), Vec2::new(4.0, 5.0));
+    }
+
+    #[test]
+    fn options_menu_cycles_the_keywords() {
+        assert_eq!(OptionsMenu::open(&[]), None);
+        let kws: Vec<String> = ["3P", "2P", "Ttr"].iter().map(|s| s.to_string()).collect();
+        let mut m = OptionsMenu::open(&kws).unwrap();
+        assert_eq!(m.current(), Some("3P"));
+        m.step(1);
+        assert_eq!(m.current(), Some("2P"));
+        m.step(1);
+        m.step(1);
+        assert_eq!(m.current(), Some("3P"), "wraps past the last");
+        m.step(-1);
+        assert_eq!(m.current(), Some("Ttr"), "wraps before the first");
+        assert!(m.fits(&kws));
+        assert!(!m.fits(&kws[..2]));
     }
 
     #[test]
@@ -279,6 +364,79 @@ mod tests {
         assert!(close(cadcraft_engine::prompt::parse_point(&t, other_last), Vec2::new(0.0, 100.0)));
     }
 
+    fn run_frame(app: &mut crate::CadApp, ctx: &egui::Context, events: Vec<egui::Event>) {
+        let raw = egui::RawInput {
+            screen_rect: Some(egui::Rect::from_min_size(egui::Pos2::ZERO, egui::vec2(1400.0, 900.0))),
+            events,
+            ..Default::default()
+        };
+        let mut out = ctx.run_ui(raw, |ui| {
+            app.logic(ui.ctx());
+            app.ui(ui);
+        });
+        out.textures_delta.clear();
+    }
+
+    fn key(key: egui::Key) -> Vec<egui::Event> {
+        let m = egui::Modifiers::NONE;
+        vec![
+            egui::Event::Key { key, physical_key: None, pressed: true, repeat: false, modifiers: m },
+            egui::Event::Key { key, physical_key: None, pressed: false, repeat: false, modifiers: m },
+        ]
+    }
+
+    #[test]
+    fn down_arrow_lists_the_options_and_enter_or_a_click_picks_one() {
+        let mut app = crate::CadApp::new(cadcraft_engine::Session::new(), crate::Services::default());
+        let ctx = egui::Context::default();
+        run_frame(&mut app, &ctx, Vec::new());
+        let center = app.canvas.rect.map_or(egui::pos2(700.0, 450.0), |r| r.center());
+        let hover = vec![egui::Event::PointerMoved(center)];
+        app.cmdline("circle");
+        let kws = app.session.current_prompt().unwrap().keywords;
+        assert!(kws.len() >= 2, "{kws:?}");
+        run_frame(&mut app, &ctx, hover.clone());
+        run_frame(&mut app, &ctx, key(egui::Key::ArrowDown));
+        assert_eq!(app.cmd.options.as_ref().and_then(|m| m.current()), kws.first().map(String::as_str));
+        run_frame(&mut app, &ctx, key(egui::Key::ArrowDown));
+        assert_eq!(app.cmd.options.as_ref().map(|m| m.index), Some(1));
+        // Escape closes the menu and leaves the command running.
+        run_frame(&mut app, &ctx, key(egui::Key::Escape));
+        assert!(app.cmd.options.is_none() && app.session.running.is_some());
+        // Down, Down, Enter: the second option answers the prompt.
+        run_frame(&mut app, &ctx, key(egui::Key::ArrowDown));
+        run_frame(&mut app, &ctx, key(egui::Key::ArrowDown));
+        run_frame(&mut app, &ctx, key(egui::Key::Enter));
+        assert!(app.cmd.options.is_none());
+        let after = app.session.current_prompt().map(|p| p.message).unwrap_or_default();
+        assert!(app.session.running.is_some(), "the option leads to its next prompt");
+        assert_ne!(after, "", "{after}");
+
+        // A click on a row picks it.
+        app.session.cancel();
+        app.cmdline("circle");
+        run_frame(&mut app, &ctx, hover);
+        run_frame(&mut app, &ctx, key(egui::Key::ArrowDown));
+        run_frame(&mut app, &ctx, Vec::new());
+        let (row, kw) = app.cmd.option_rows.get(1).cloned().expect("the menu is drawn at the cursor");
+        assert_eq!(Some(&kw), kws.get(1));
+        let at = row.center();
+        let click = |pressed| egui::Event::PointerButton { pos: at, button: egui::PointerButton::Primary, pressed, modifiers: egui::Modifiers::NONE };
+        run_frame(&mut app, &ctx, vec![egui::Event::PointerMoved(at)]);
+        run_frame(&mut app, &ctx, vec![click(true)]);
+        run_frame(&mut app, &ctx, vec![click(false)]);
+        assert!(app.cmd.options.is_none());
+        assert_eq!(app.session.current_prompt().map(|p| p.message), Some(after), "same option, same next prompt");
+        assert!(app.session.doc().unwrap().model.iter().next().is_none(), "the click placed no point");
+
+        // DYNPROMPT = 0: Down Arrow is left to the history.
+        app.session.cancel();
+        app.session.settings.dynprompt = false;
+        app.cmdline("circle");
+        run_frame(&mut app, &ctx, key(egui::Key::ArrowDown));
+        assert!(app.cmd.options.is_none());
+    }
+
     #[test]
     fn empty_text_is_an_empty_entry() {
         let f = second_point(Vec2::ZERO);
diff --git a/crates/ui-egui/src/i18n/uk.tsv b/crates/ui-egui/src/i18n/uk.tsv
index e7116d652..3cdc9e6e6 100644
--- a/crates/ui-egui/src/i18n/uk.tsv
+++ b/crates/ui-egui/src/i18n/uk.tsv
@@ -771,6 +771,7 @@
 	Show All	Показати всі
 	Show All Constraint Bars	Показати всі панелі обмежень
 	Show All Dynamic Dimensions	Показати всі динамічні розміри
+	Show command prompting near the crosshairs	Показувати запити команд біля перехрестя
 	Show Layer List	Показати список шарів
 	Show/Hide Lineweight	Показати/приховати товщину ліній
 	Show/Hide Transparency	Показати/приховати прозорість